Skip to the content
2 layers110 × 85 mmMGS2401-B144x x Breakout Board v1.0 RFID RTC, the printed circuit board in 3D

MGS2401-B144x x Breakout Board v1.0 RFID RTC

Deeptha12/Kicad-boards
Size
110 × 85 mm
Copper layers
2
Thickness
1.6 mm
Parts
37
Nets
109
Pads
196
Tracks, vias
325, 40
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
6 Sep 2026
Updated
1 Nov 2026

Overview

MGS2401-B144x x Breakout Board v1.0 RFID RTC is an open-source printed circuit board by Deeptha12, from the Deeptha12/Kicad-boards repository on GitHub. It is a 2-layer board of 110 × 85 mm with 37 parts on 109 nets, routed with 325 tracks and 40 vias.

It is built around the TCS34725FN, LSF0108PW and TLV73333PDBV, with the DS3231MZ+ among its other parts. Its parts include 11 capacitors, 11 resistors, 6 ICs, 6 connectors and 1 diode. It belongs with the radio and wireless and interfaces and adapters boards of this library.

Main components

4

Parts

37
QtyValueFootprintReferences
70.1uCapacitor_SMD:C_0603_1608MetricC2, C3, C6, C10, C11, C12, C13
64.7kResistor_SMD:R_0603_1608MetricR7, R8, R8, R9, R14, R15
41uCapacitor_SMD:C_0805_2012MetricC1, C4, C8, C9
31kResistor_SMD:R_0603_1608MetricR1, R3, R4
3Conn_02x10_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_VerticalJ3, J4, J5
2200kResistor_SMD:R_0603_1608MetricR5, R6
2Conn_02x02_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_VerticalJ1, J2
2LSF0108PWPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU4, U7
2TLV73333PDBVPackage_TO_SOT_SMD:SOT-23-5U1, U6
1Barrel_Jack_SwitchConnector_BarrelJack:BarrelJack_CUI_PJ-102AH_HorizontalJ6
1Battery_CellBattery:BatteryHolder_Keystone_1058_1x2032BT1
1DS3231MPackage_SO:SOIC-16W_7.5x10.3mm_P1.27mmU2
1REDLED_SMD:LED_0603_1608MetricD1
1SW_SPDTButton_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2QSW1
1TCS34725FNColor_sensor:TCS34725FN_AMSU5

Similar boards

  • 12 layers280 × 111.2 mmFpga candelabra, the printed circuit board in 3D

    Fpga candelabra

    chipsalliance/rocket-pcb

    PCB libraries and templates for rocket-chip based FPGA/ASIC designs

    738 parts21Apache-2.0
  • 2 layers85 × 56 mmYoga v2, the printed circuit board in 3D

    Yoga v2

    mschwingen/hardware

    Hardware designs by Michael Schwingen, michael at schwingen dot org

    85 parts10
  • 4 layers200 × 99 mmMRIRobot PCB, the printed circuit board in 3D

    MRIRobot PCB

    biomimetics/MRIRobot_PCB

    PC boards for MRI robogt control, specifically for STM32 motherboard

    339 parts2
  • 4 layers68.6 × 56 mmCartridge, the printed circuit board in 3D

    Cartridge

    coco-chameleon/chameleon-hardware

    TRS-80 Color Computer cartridge emulator

    95 partsCERN-OHL-W-2.0
  • 2 layers30.3 × 65.3 mmPlanticam sensor block, the printed circuit board in 3D

    Planticam sensor block

    dunkelstern/planticam-sensor-block

    Planticam Sensor addon-board to allow sensing with 1 Wire and analog sensors and switching external loads

    39 parts
  • 2 layers42.2 × 65 mmZerosensor, the printed circuit board in 3D

    Zerosensor

    dunkelstern/zerosensor

    Raspberry Pi Zero sensor board

    76 parts
  • 4 layers81 × 117 mmHi board, the printed circuit board in 3D

    Hi board

    blazer82/gb.fpga

    FPGA-based handheld console that plays games from Gameboy cartridges

    77 parts12
  • 2 layers115.8 × 160.2 mmKicad RCJ, the printed circuit board in 3D

    Kicad RCJ

    edrobotics/rescue_maze_2024

    Code for Robocup Junior Rescue Maze 2024

    84 parts4GPL-3.0

Questions

How big is the MGS2401-B144x x Breakout Board v1.0 RFID RTC PCB?

It measures 110 × 85 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MGS2401-B144x x Breakout Board v1.0 RFID RTC use?

37 parts, built around the TCS34725FN, LSF0108PW, TLV73333PDBV and DS3231MZ+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MGS2401-B144x x Breakout Board v1.0 RFID RTC KiCad files?

From the Deeptha12/Kicad-boards repository on GitHub, at the commit this page was made from: the board is MGS2401-B144x-x_Breakout-Board-v1.0_RFID_RTC.kicad_pcb and its schematic MGS2401-B144x-x_Breakout-Board-v1.0_RFID_RTC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MGS2401-B144x x Breakout Board v1.0 RFID RTC design in my own project?

Its repository states no licence, so its author keeps all rights: ask Deeptha12 before reusing the design.