
MRIRobot PCB
biomimetics/MRIRobot_PCB
PC boards for MRI robogt control, specifically for STM32 motherboard

PC boards for MRI robogt control, specifically for STM32 motherboard
MRIRobot PCB is an open-source printed circuit board by biomimetics, from the biomimetics/MRIRobot_PCB repository on GitHub. It is a 4-layer board of 200 × 99 mm with 339 parts on 270 nets, routed with 2,167 tracks and 491 vias.
It is built around the FT231XS-R, LM22676MR-5.0 and LM22676MR-ADJ, with the LSF0108PW, RJCSE538001 and SUD08P06-155L-VB among its other parts. Its parts include 113 diodes, 108 resistors, 61 capacitors, 31 connectors and 8 ICs.
PC boards for MRI robot control, specifically for STM32 motherboard
Main_PCB (holds STM32 Nucleo 446RE and FPGA for encoder reading)
Power_PCB (switches for enabling individual ultrasonic motors, +24V in connector, master power switch))
Motor_Joint_Splitter (mounted on robot arm)
Motor Joint Splitter V3 (mounted next to each actuator)
Motor_reroute (at motor controller. Splits Tekcelo control signal to use ethernet for a pair of encoders, and 3 wire sin/cos/gnd cable for 250V )
| Qty | Value | Footprint | References |
|---|---|---|---|
| 94 | D_TVS | Diode_SMD:D_SOD-123F | D15, D16, D17, D18, D19, D20, D100, D101, D102, D103, D104, D105, D106, D107, D108, D110 +78 |
| 42 | 100 pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C20, C21, C22, C23, C24, C25, C26, C27, C28, C29, C30, C31, C32, C33, C34, C35 +26 |
| 42 | 1k | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R10, R11, R12, R15, R16, R17, R18, R19, R20, R23, R24, R25, R26, R27, R28, R29 +26 |
| 28 | 10k | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R110, R111, R112, R113, R114, R115, R116, R117, R118, R119, R120, R121, R122, R123, R124, R125 +12 |
| 14 | 4K | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R54, R55, R60, R61, R64, R65, R66, R67, R72, R73, R76, R77, R78, R79 |
| 10 | 290 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R4, R5, R68, R69, R70, R71, R74, R75, R86, R87 |
| 10 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6, D7, D8, D9, D10, D11, D13, D14, D112, D113 |
| 9 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6, H7, H8, H9 |
| 7 | 0.01 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7, C12, C13, C14, C15, C16 |
| 7 | Conn_01x05 | Connector_JST:JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J1, J2, J3, J5, J6, J7, J8 |
| 7 | Conn_01x08 | Connector_JST:JST_EH_B8B-EH-A_1x08_P2.50mm_Vertical | J17, J18, J19, J20, J21, J24, J27 |
| 7 | Homing | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J10, J11, J12, J13, J14, J15, J16 |
| 5 | D | Diode_SMD:D_SMA_Handsoldering | D1, D2, D3, D4, D5 |
| 4 | Conn_01x03 | Connector_JST:JST_XA_B03B-XASK-1-A_1x03_P2.50mm_Vertical | J22, J23, J25, J26 |
| 4 | RJCSE538001 | RJCSE538001:AMPHENOL_RJCSE538001 | J28, J32, J33, J34 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17, C18, C19 |
| 3 | 200k | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R1, R2, R3 |
| 3 | D | Diode_SMD:D_SOD-128 | D12, D87, D111 |
| 3 | LSF0108 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U6, U7, U8 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric | C8, C9 |
| 2 | 120uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C10, C11 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R57, R59 |
| 2 | 22uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2, C3 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R22 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14 |
| 2 | 6.2k | Resistor_SMD:R_0805_2012Metric | R56, R58 |
| 2 | 6.8uF | Capacitor_SMD:C_0805_2012Metric | C4, C5 |
| 2 | 8.2uH | Inductor_SMD:L_7.3x7.3_H3.5 | L1, L2 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 1.54k | Resistor_SMD:R_0805_2012Metric | R63 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 3.3V Enable | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW2 |
| 1 | 5V Enable | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW1 |
| 1 | 976 | Resistor_SMD:R_0805_2012Metric | R62 |
| 1 | CMOD_A7_FPGA | CMOD_FPGA:CMODA7 | U3 |
| 1 | D_Zener | Diode_SMD:D_SMA_Handsoldering | D109 |
| 1 | FT231XS | Package_SO:SSOP-20_3.9x8.7mm_P0.635mm | U2 |
| 1 | LM22676MR-5 | Package_SO:TI_SO-PowerPAD-8 | U4 |
| 1 | LM22676MR-ADJ | Package_SO:TI_SO-PowerPAD-8 | U5 |
| 1 | NUCLEO-F446RE | STM32:MODULE_NUCLEO-F446RE | U1 |
| 1 | Power In | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J9 |
| 1 | SUD08P06-155L | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | Toggle_Switch0 | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW3 |
| 1 | Toggle_Switch1 | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW4 |
| 1 | Toggle_Switch2 | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW5 |
| 1 | Toggle_Switch3 | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW6 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J4 |

biomimetics/MRIRobot_PCB
PC boards for MRI robogt control, specifically for STM32 motherboard

biomimetics/MRIRobot_PCB
PC boards for MRI robogt control, specifically for STM32 motherboard

biomimetics/MRIRobot_PCB
PC boards for MRI robogt control, specifically for STM32 motherboard

biomimetics/MRIRobot_PCB
PC boards for MRI robogt control, specifically for STM32 motherboard

biomimetics/MRIRobot_PCB
PC boards for MRI robogt control, specifically for STM32 motherboard

biomimetics/MRIRobot_PCB
PC boards for MRI robogt control, specifically for STM32 motherboard

biomimetics/MRIRobot_PCB
PC boards for MRI robogt control, specifically for STM32 motherboard

biomimetics/MRIRobot_PCB
PC boards for MRI robogt control, specifically for STM32 motherboard

biomimetics/MRIRobot_PCB
PC boards for MRI robogt control, specifically for STM32 motherboard

biomimetics/MRIRobot_PCB
PC boards for MRI robogt control, specifically for STM32 motherboard

biomimetics/MRIRobot_PCB
PC boards for MRI robogt control, specifically for STM32 motherboard

biomimetics/MRIRobot_PCB
PC boards for MRI robogt control, specifically for STM32 motherboard




YC-Lam/simple_CM4_cluster
Raspbberry Pi compute module 4 cluster in a 120x120x60mm form-factor. each pi can work alone as a 78x58mm SBC

dridri/bcflight
Raspberry Pi based drone flight controller and remote control

ARTS-Laboratory/SPECIES
Design and development of a deployable UAV smart penetrometer


chipsalliance/rocket-pcb
PCB libraries and templates for rocket-chip based FPGA/ASIC designs
It measures 200 × 99 mm and has 4 copper layers, 1.6 mm thick.
339 parts, built around the FT231XS-R, LM22676MR-5.0, LM22676MR-ADJ and LSF0108PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the biomimetics/MRIRobot_PCB repository on GitHub, at the commit this page was made from: the board is Main_PCB_V4/MRIRobot_PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask biomimetics before reusing the design.