12 layers280 × 111.2 mm
Fpga candelabra
chipsalliance/rocket-pcb
PCB libraries and templates for rocket-chip based FPGA/ASIC designs
738 parts21Apache-2.0
2 layers30.3 × 65.3 mm
Planticam sensor block
dunkelstern/planticam-sensor-blockPlanticam Sensor addon-board to allow sensing with 1 Wire and analog sensors and switching external loads
- Size
- 30.3 × 65.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 65
- Pads
- 147
- Tracks, vias
- 326, 24
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Jan 2021
- Updated
- 1 Jan 2021
Overview
Planticam sensor block is an open-source printed circuit board by dunkelstern, from the dunkelstern/planticam-sensor-block repository on GitHub. It is a 2-layer board of 30.3 × 65.3 mm with 39 parts on 65 nets, routed with 326 tracks and 24 vias.
It is built around the LSF0108PW. Its parts include 20 resistors, 9 connectors, 3 capacitors and 2 ICs. It belongs with the sensors and measurement boards of this library.
Main components
1Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | TestPoint_Pad_D1.5mm | TestPoint:TestPoint_Pad_D1.5mm | 3.3V, 5V, GND, SCL, SDA |
| 4 | 1.5k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R7, R8 |
| 4 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9, R11, R13, R15 |
| 4 | 33k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10, R12, R14, R16 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R18, R19 |
| 3 | 330 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R5, R6 |
| 1 | 1Wire | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | 200k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R24 |
| 1 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | AIN0 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J7 |
| 1 | AIN1 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J8 |
| 1 | AIN2 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J5 |
| 1 | AIN3 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J6 |
| 1 | LSF0108 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | MAX11600 | Package_TO_SOT_SMD:SOT-23-8 | U2 |
| 1 | OUT1 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J2 |
| 1 | OUT2 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | OUT3 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4 |
| 1 | Raspberry_Pi_2_3 | Module:Raspberry_Pi_Zero_Socketed_THT_FaceDown_MountingHoles | J1 |
Similar boards
- 2 layers85 × 56 mm
Yoga v2
mschwingen/hardware
Hardware designs by Michael Schwingen, michael at schwingen dot org
85 parts10 - 4 layers200 × 99 mm
MRIRobot PCB
biomimetics/MRIRobot_PCB
PC boards for MRI robogt control, specifically for STM32 motherboard
339 parts2 - 4 layers68.6 × 56 mm
Cartridge
coco-chameleon/chameleon-hardware
TRS-80 Color Computer cartridge emulator
95 partsCERN-OHL-W-2.0 - 2 layers110 × 85 mm
- 2 layers42.2 × 65 mm
- 4 layers81 × 117 mm
Hi board
blazer82/gb.fpga
FPGA-based handheld console that plays games from Gameboy cartridges
77 parts12 - 2 layers24.4 × 24.4 mm
OSO SWAT B1
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
39 parts2.1k
Questions
How big is the Planticam sensor block PCB?
It measures 30.3 × 65.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Planticam sensor block use?
39 parts, built around the LSF0108PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Planticam sensor block KiCad files?
From the dunkelstern/planticam-sensor-block repository on GitHub, at the commit this page was made from: the board is Planticam_Sensor_Block.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Planticam sensor block design in my own project?
Its repository states no licence, so its author keeps all rights: ask dunkelstern before reusing the design.