
Harness
coco-chameleon/chameleon-hardware
TRS-80 Color Computer cartridge emulator

TRS-80 Color Computer cartridge emulator
Cartridge is an open-source printed circuit board by coco-chameleon, from the coco-chameleon/chameleon-hardware repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 4-layer board of 68.6 × 56 mm with 95 parts on 169 nets, routed with 1,030 tracks and 154 vias.
It is built around the RP2350B, ESP32-C3-WROOM-02U-N4 and RC4558D, with the W25Q128JVSIQ, LM66100DCK and AMS1117-3.3 among its other parts. Its parts include 29 capacitors, 28 resistors, 12 ICs, 5 connectors and 2 diodes. It belongs with the retro computing and games boards and the ESP32, RP2350 and RISC-V boards of this library.
The CoCo Chameleon is a cartridge for the Tandy TRS-80 Color Computer line of home computers from the 1980s which emulates other cartridges. It supports all three versions of the CoCo and should be able to replicate the computer-facing behavior of nearly any other cartridge.
The primary aim of the project is to emulate ROM cartridges and all of the common floppy and hard disk controller cartridges from image files stored on a MicroSD card.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100n | Capacitor_SMD:C_0402_1005Metric | C4, C5, C6, C7, C8, C9, C18, C19, C20, C22, C23, C24, C25, C26 |
| 4 | CoCo_MountingHole | 0Project:CoCo_MountingHole | MH1, MH1, MH1, MH2 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric | C11, C27, C28 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R11, R27, R28 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R12, R13 |
| 2 | 10k 1% | Resistor_SMD:R_0402_1005Metric | R19, R22 |
| 2 | 15k 1% | Resistor_SMD:R_0402_1005Metric | R8, R25 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C10, C12 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C13, C14 |
| 2 | 22u | Capacitor_SMD:C_1206_3216Metric | C1, C2 |
| 2 | 27R | Resistor_SMD:R_0402_1005Metric | R16, R17 |
| 2 | 2k2 1% | Resistor_SMD:R_0402_1005Metric | R21, R23 |
| 2 | 3k3 1% | Resistor_SMD:R_0402_1005Metric | R5, R10 |
| 2 | 4u7 | 0Project:C_0402_1005Metric_Pad0.53x0.47mm_Passthrough | C15, C16 |
| 2 | 4u7 | Capacitor_SMD:C_0402_1005Metric | C17, C21 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 6k8 1% | Resistor_SMD:R_0402_1005Metric | R9, R24 |
| 2 | CUS-14TB | 0Project:Nidec_CUS-14TB | SW1, SW2 |
| 2 | GND | TestPoint:TestPoint_Pad_4.0x4.0mm | TP2, TP4 |
| 2 | LM66100DCK | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U11, U12 |
| 1 | +1V1 | TestPoint:TestPoint_Pad_D2.0mm | TP1 |
| 1 | +3V3 | TestPoint:TestPoint_Pad_D2.0mm | TP3 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 1k5 1% | Resistor_SMD:R_0402_1005Metric | R26 |
| 1 | 25p | Capacitor_SMD:C_0603_1608Metric | C29 |
| 1 | 2k7 1% | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 33R | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 3k9 1% | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 4k7 1% | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 900k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | AOTA-B201610S3R3-101-T | 0Project:L_Polarized_2016 | L1 |
| 1 | Attend 112J | 0Project:Attend_112J | J1 |
| 1 | BAV170 | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | CR2016 | 0Project:BatteryHolder_Keystone_3026_1x2016 | BT1 |
| 1 | Card Edge | 0Project:CoCo_Cart | P1 |
| 1 | CoCo_ClearanceHole | 0Project:CoCo_ClearanceHole | MH5 |
| 1 | ESP32-C3-WROOM-02U | RF_Module:ESP32-C3-WROOM-02U | U6 |
| 1 | GCT USB4105 | 0Project:GCT_USB4105 | J2 |
| 1 | IN-PI33TBTPRPGP | 0Project:LED_1414_3535Metric | D3 |
| 1 | LSF0108PW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U5 |
| 1 | OSHW-Symbol_6.7x6mm_SilkScreen | Symbol:OSHW-Symbol_6.7x6mm_SilkScreen | G2 |
| 1 | PCF8563T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | PCM1754DBQ | Package_SO:SSOP-16_3.9x4.9mm_P0.635mm | U8 |
| 1 | RC4558 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | RP2350B | 0Project:RP2350-QFN-80-1EP_10x10_P0.4mm_EP3.4x3.4mm_ThermalVias | U2 |
| 1 | SC-32S 20ppm 12.5pF | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J3 |
| 1 | TC2050 | Connector:Tag-Connect_TC2050-IDC-NL_2x05_P1.27mm_Vertical | J4 |
| 1 | TPS2041B | Package_TO_SOT_SMD:SOT-23-5 | U10 |
| 1 | TUSB321 | Package_DFN_QFN:Texas_X2QFN-12_1.6x1.6mm_P0.4mm | U3 |
| 1 | W25Q128JVS | 0Project:SOIC-8_3.9-5.3x5.3mm_P1.27mm | U4 |
The 92 most common of 95 parts.


AntoG00/ESP32-C6-CO2-Monitor
Low-power CO2, temperature and humidity monitor using ESP32-C6 and E-Paper display.



sverrham/diy-smu
DIY Source Measurement Unit, four quadrant powersupply and ?.? digit volt/current meter.

MaizeShark/Nikon-NMEA-Pro
low-power GNSS logger and BLE remote shutter for Nikon cameras

nikolajevs/ai
Открыть PCBV1.kicadpro в KiCad 10. После обновления репозитория перечитать открытый проект с диска перед сохранением.

chipsalliance/rocket-pcb
PCB libraries and templates for rocket-chip based FPGA/ASIC designs
It measures 68.6 × 56 mm and has 4 copper layers, 1.61 mm thick.
95 parts, built around the RP2350B, ESP32-C3-WROOM-02U-N4, RC4558D and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the coco-chameleon/chameleon-hardware repository on GitHub, at the commit this page was made from: the board is board/cartridge/cartridge.kicad_pcb and its schematic board/cartridge/cartridge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).