
Comp Board
badaboombox/SS-Handheld-Console
An open-source handheld game console built around a Lattice ECP5 FPGA that uses a custom hybrid 2D + 3D graphics engine capable of DS-era 2D-and-3D gameplay at a locked 60 fps.

Solar PCB for RP2040.
Mmeshtastic pcb is an open-source printed circuit board by Bir-Paragliding-Community, from the Bir-Paragliding-Community/RP2040-Solar-PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 90.2 × 44.5 mm with 29 parts on 44 nets, routed with 123 tracks and 14 vias.
It is built around the DW01A, FS8205A and SS16. Its parts include 6 resistors, 5 capacitors, 3 ICs, 2 diodes and 2 connectors. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | PCM_Capacitor_SMD_AKL:C_0805_2012Metric | C1, C2, C3, C4 |
| 4 | TestPoint | custom:SolderWire-0.25sqmm_1x01_D0.65mm_OD2mm_Relief | TP1, TP2, TP3, TP4 |
| 1 | 100 | PCM_Resistor_SMD_AKL:R_0805_2012Metric | R2 |
| 1 | 100K | PCM_Resistor_SMD_AKL:R_0805_2012Metric | R6 |
| 1 | 10K | PCM_Resistor_SMD_AKL:R_0805_2012Metric | R5 |
| 1 | 10uF | PCM_Capacitor_SMD_AKL:C_0805_2012Metric | C5 |
| 1 | 12V_SNS | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | 150K | PCM_Resistor_SMD_AKL:R_0805_2012Metric | R3 |
| 1 | 1K | PCM_Resistor_SMD_AKL:R_0805_2012Metric | R1 |
| 1 | 20K | PCM_Resistor_SMD_AKL:R_0805_2012Metric | R4 |
| 1 | BAT_PWR | PCM_Jumper_AKL:Jumper_P2.54mm_D1.2mm | JP2 |
| 1 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x05 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J1 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | Exclaimation | Symbol:Symbol_Attention_Triangle_8x7mm_Copper | SYM2 |
| 1 | FS8205A | PCM_Package_SO_AKL:TSSOP-8_4.4x3mm_P0.65mm | Q1 |
| 1 | LED_Dual_KAK | LED_THT:LED_D3.0mm-3 | D1 |
| 1 | LM2596 Module | Ar_Modules:module_LM2596 | U3 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | SYM1 |
| 1 | RP2040-LoRa-HF | easyeda2kicad:LCC-32_L41.0-W21.0-P2.54-BL_RP2040-LoRa | M1 |
| 1 | SS16 | PCM_Diode_SMD_AKL:D_SMA | D2 |
| 1 | TP5000_Breakout_Akaddy | STS_Boards:TP5000_Breakout_Akaddy | U2 |
| 1 | TP_PWR | PCM_Jumper_AKL:Jumper_P2.54mm_D1.2mm | JP1 |

badaboombox/SS-Handheld-Console
An open-source handheld game console built around a Lattice ECP5 FPGA that uses a custom hybrid 2D + 3D graphics engine capable of DS-era 2D-and-3D gameplay at a locked 60 fps.

iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.


Xii-Labs/Xii-Boy-Ultra
The world's first wire-free Wii portable, now in the palm of your hands. Better than ever, optimized to delight, built for fun. The next generation of Wii portables starts now.

RobieElliz/esp32InductanceMeterV2
Portable ESP32 Inductance Meter: A low-cost, high-precision tool with dual 100nF/5µF refs, a TLV3202 comparator, fast USB-C (IP2312) charging, and a 2.4-inch OLED display for real-time readings.


user-will/PCB_CANNONBALL
An ESP32-C3 dev board with more sensors and features then you could know what to do with

I-AM-ENGINEER/AudMX
Alternative for Deej ( https://github.com/omriharel/deej ) with more features
It measures 90.2 × 44.5 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the DW01A, FS8205A and SS16. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Bir-Paragliding-Community/RP2040-Solar-PCB repository on GitHub, at the commit this page was made from: the board is mmeshtastic-pcb.kicad_pcb and its schematic mmeshtastic-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).