Skip to the content
2 layers170.2 × 194.3 mmSEM, the printed circuit board in 3D
Size
170.2 × 194.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
199
Nets
90
Pads
515
Tracks, vias
907, 0
Pours
9
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
8 Oct 2024
Updated
8 Oct 2024

Overview

SEM is an open-source printed circuit board by Belalhossam7100, from the Belalhossam7100/MotorDriver repository on GitHub. It is a 2-layer board of 170.2 × 194.3 mm with 199 parts on 90 nets, routed with 907 tracks and 0 vias.

It is built around the IR2110L4, UF5401 and B41858D9337M000. Its parts include 79 resistors, 47 capacitors, 27 diodes, 24 transistors and 16 connectors.

Main components

3

Parts

199
QtyValueFootprintReferences
2410RResistor_SMD:R_1206_3216MetricR24, R25, R26, R27, R28, R29, R36, R37, R38, R39, R40, R41, R48, R49, R50, R51 +8
241KResistor_SMD:R_1206_3216MetricR30, R31, R32, R33, R34, R35, R42, R43, R44, R45, R46, R47, R56, R57, R65, R66 +8
24IRF13710IRF3710:TO254P483X1016X1994-3PQ1, Q2, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21, Q22, Q23 +8
24UF5401Diode_SMD:D_SMAD10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25 +8
10B41858D9337M000Capacitor_THT:CP_Radial_D6.3mm_P2.50mmC40, C43, C46, C49, C52, C56, C57, C58, C59, C60
9270pCapacitor_THT:C_Disc_D6.0mm_W4.4mm_P5.00mmC4, C7, C11, C12, C13, C16, C17, C21, C23
92k2Resistor_SMD:R_1206_3216MetricR13, R14, R15, R16, R17, R18, R19, R20, R22
960R4Resistor_SMD:R_1206_3216MetricR1, R2, R3, R4, R5, R6, R7, R8, R9
610nCapacitor_THT:C_Disc_D6.0mm_W4.4mm_P5.00mmC25, C28, C30, C31, C32, C33
64.7u 25VCapacitor_THT:C_Rect_L7.0mm_W2.0mm_P5.00mmC19, C22, C24, C26, C27, C29
6Conn_01x07Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ11, J11, J12, J12, J13, J13
6F611BY685K100ACapacitor_THT:C_Rect_L18.0mm_W11.0mm_P15.00mm_FKS3_FKP3C41, C44, C47, C50, C53, C55
41RResistor_SMD:R_1206_3216MetricR58, R59, R61, R62
4C1206C105K1RACTUCapacitor_THT:C_Rect_L13.0mm_W3.0mm_P10.00mm_FKS3_FKP3_MKS4C42, C45, C48, C51
3100nCapacitor_THT:C_Disc_D6.0mm_W4.4mm_P5.00mmC6, C8, C9
3150kResistor_SMD:R_1206_3216MetricR52, R81, R83
32.2RResistor_SMD:R_1206_3216MetricR10, R11, R12
32.2u 35VCapacitor_THT:C_Rect_L7.0mm_W2.0mm_P5.00mmC2, C3, C5
33k24Resistor_SMD:R_1206_3216MetricR53, R82, R84
3ACS758xCB-100B-PSFSensor_Current:Allegro_CB_PSFU4, U5, U6
3Conn_01x05Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ4, J9, J10
3IR2110Package_DIP:DIP-14_W7.62mmU1, U2, U3
3PHASE WIREMountingHole:MountingHole_6mm_Pad_TopBottomJ1, J2, J3
3SS115+Diode_SMD:D_SMAD1, D2, D4
2Conn_01x04TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_HorizontalJ5, J8
1IN+MountingHole:MountingHole_6mm_Pad_TopBottomJ6
1IN-MountingHole:MountingHole_6mm_Pad_TopBottomJ7

Similar boards

  • 4 layers231 × 67 mmBESC G2, the printed circuit board in 3D

    BESC G2

    galpavlin/BESC-G2

    BESC second generation

    300 parts58
  • 2 layers130 × 80 mmPico controller, the printed circuit board in 3D

    Pico controller

    cclienti/tig-welder

    A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source

    125 parts8GPL-3.0
  • 2 layers377.2 × 318 mmThree phase bridge, the printed circuit board in 3D

    Three phase bridge

    arcoslab/open-coroco-legacy

    COmpliant RObot COntroller is a free software project aiming to create an impedance controller based on a stm32 microcontroller using bldc motors and strain gauges.

    105 parts6
  • 2 layersPCB Layout, the printed circuit board in 3D

    PCB Layout

    chgopireddy/Full-Bridge-Class-D-Audio-Amplifier

    LTspice Model for Full Bridge Class D, Voltage Mode Control, Peak Current Mode Control

    63 parts6
  • 2 layers123.5 × 132 mmBLDC, the printed circuit board in 3D

    BLDC

    AssaadMH/sensorless-bldc-control

    Spinning a brushless motor with no position sensor — commutating on the back-EMF zero crossings instead.

    28 parts1MIT
  • 2 layers180.4 × 92.8 mmBLDC ESC - V1, the printed circuit board in 3D

    BLDC ESC - V1

    JIMS-Innovations/BLDCM-ESC

    This repository contains the firmware, design files and documents for a Sensorless Electronic Speed Controller (for brushless DC motors) developed by Jesutofunmi Kupoluyi.

    73 parts1
  • 2 layersModified sine inverter gwo pid, the printed circuit board in 3D

    Modified sine inverter gwo pid

    mofaa69/modified-sine-inverter-gwo-pid

    TÜBİTAK 2209-A Destekli GWO-PID Kontrollü Modifiye Sinüs İnverter Tasarımı ve Uygulaması

    61 parts1
  • 2 layers100.3 × 49.5 mmFORWARD CONVERTER, the printed circuit board in 3D

    FORWARD CONVERTER

    omerkarslioglu/forward_converter_pi_control

    9-36V Input Voltage, 28 Output Voltage, All Ripple: %2, 50KHz, 50 Watt DC-DC Forward Converter Design And Production

    38 parts1

Questions

How big is the SEM PCB?

It measures 170.2 × 194.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SEM use?

199 parts, built around the IR2110L4, UF5401 and B41858D9337M000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SEM KiCad files?

From the Belalhossam7100/MotorDriver repository on GitHub, at the commit this page was made from: the board is SEM.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the SEM design in my own project?

Its repository states no licence, so its author keeps all rights: ask Belalhossam7100 before reusing the design.