

HearingAid ESP
Plan II Thesis - Avery Atchley
- Size
- 96.2 × 62.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 108
- Nets
- 86
- Pads
- 379
- Tracks, vias
- 745, 22
- Pours
- 357
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 19 Jan 2025
- Updated
- 31 Mar 2025
Overview
HearingAid ESP is an open-source printed circuit board by AveryLion03, from the AveryLion03/HearingAid repository on GitHub. It is a 2-layer board of 96.2 × 62.4 mm with 108 parts on 86 nets, routed with 745 tracks and 22 vias.
It is built around the ESP32-S3, AP2112K-3.3 and DW01A, with the TP4056, 12402012E212A and FS8205A among its other parts. Its parts include 25 resistors, 12 capacitors, 10 ICs, 8 diodes and 4 transistors. It belongs with the ESP32 boards of this library.
Main components
7ESP32-S3
QFN-56-EP(7x7)-40℃~+105℃ -98.4dBm 150Mbps 2.412GHz~2.484GHz 2.4GHz 21dBm 340mA 3V~3.6V 88mA SPI、USB、UART、ADC、I2C、I2S、PWM WiFi transceiver QFN-56-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICsAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedDW01A
SOT-23-6L-40℃~+85℃ 1 2.5V 300mV~10V 3uA 4.3V Protection IC Support SOT-23-6L Battery Management ROHSPUOLOPBattery ManagementTP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management12402012E212A
SMD1 5A Female Type-C USB 2.0 SMD USB Connectors ROHSAmphenolUSB ConnectorsFS8205A
SOT-23-6-55℃~+150℃ 1.2V 1.5W 2 N-Channel 20V 31.5mΩ@2.5V 466pF 5.7nC@4.5V 58pF 65pF 6A SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETsXRCGB40M000F1S1BR0
SMD2016-4P-30℃~+85℃ 40MHz 50Ω 8pF ±10ppm ±10ppm SMD2016-4P Crystals ROHSMurataCrystals
Parts
108| Qty | Value | Footprint | References |
|---|---|---|---|
| 40 | TestPoint | MountingHole:Mounting_Pad_Square | TP1, TP1, TP2, TP10, TP10, TP11, TP11, TP12, TP12, TP13, TP14, TP14, TP15, TP16, TP17, TP18 +24 |
| 6 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R4, R5, R5, R7, R7 |
| 4 | 100k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R1, R8, R8 |
| 4 | 5.1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R2, R3, R3 |
| 3 | 100k | Resistor_SMD:R_0402_1005Metric | R10, R10, R13 |
| 3 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C9, C9 |
| 3 | 4.7uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C1, C3 |
| 3 | Battery_Cell | Battery:BatteryHolder_Keystone_3034_1x20mm_CustomCourtyard | BT1, BT2, BT2 |
| 3 | GREEN_LED | LED_SMD:LED_0402_1005Metric | D1, D1, D4 |
| 3 | MAX98357A | Package_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U2, U2, U5 |
| 3 | RED_LED | LED_SMD:LED_0402_1005Metric | D2, D2, D3 |
| 2 | 100 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R9, R9 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R14, R15 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6, C7 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C2 |
| 2 | 12402012E212A | 12402012E212A:AMPHENOL_12402012E212A | J1, J1 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5, C8 |
| 2 | 2k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6, R6 |
| 2 | 470 | Resistor_SMD:R_0402_1005Metric | R11, R12 |
| 2 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1, U1 |
| 2 | DW01A | DW01A:SOT95P280X145-6N | U4, U4 |
| 2 | D_Schottky_Small_Filled | 1PS76SB10_135:SOD323_F_ | D5, D5 |
| 2 | FS8205A | Package_TO_SOT_SMD:SOT-23-6 | Q2, Q2 |
| 2 | SW_Push | B3U-1000P:SW_B3U-1000P | SW1, SW2 |
| 2 | TP4056 | TP4056 (1):SO08-PAD-300 | U3, U3 |
| 1 | 450404015514 | 450404015514:450404015514 | S1 |
| 1 | ESP32-S3 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm | U8 |
| 1 | PMOS | footprints:DMP3099L-7 | Q1 |
| 1 | PMOS | footprints:DMP3099L-7_Correct | Q1 |
| 1 | XRCGB40M000F1S1BR0 | XRCGB40M000F1S1BR0:OSC_XRCGB40M000F1S1BR0 | Y1 |
More from AveryLion03/HearingAid
5- 2 layers75.8 × 19.3 mm

- 2 layers69.2 × 22.1 mm

- 2 layers24.4 × 19.1 mm

- 2 layers24.4 × 19.1 mm

- 2 layers24.4 × 19.1 mm

Similar boards
- 4 layers22.9 × 58.6 mm

- 4 layers38 × 65 mm

FelineWatchdog
Paschalis/FelineWatchdog
An ESP32-based system to alert you when your cat goes missing. Monitors Wi-Fi connection between your cat's collar-mounted ESP32 device and an embedded system.
33 partsGPL-3.0 - 4 layers142.1 × 143 mm

Flipper black ki cad
Broccoliux/Black-Flipper
A device that out smart Flipper Zero in every aspect.
216 parts7 - 2 layers192.4 × 50 mm

- 2 layers151 × 95 mm

Deneme
g210101021/OpenStylophone-RP2040
Overview • Technical Summary • Architecture • Hardware Audit & Remediation • Schematic Subsystems • PCB Layout • Firmware Roadmap • Bill of Materials • Author
143 parts - 2 layers62 × 6 mm

TableLight
jonny190/TableLight
A 3D-printable, battery-powered, USB-C rechargeable table lamp in the classic "Poldina" shape - honeycomb disc base, thin stem, down-firing cone shade with a white top - running WLED on an ESP32, with a capacitive touch…
72 partsMIT - 2 layers100 × 100.1 mm

Diploma
t3ry4git/stm32Co2
A simple CO2 and environmental monitor based on the STM32F103C8 microcontroller. The firmware reads temperature and humidity from a DHT22 sensor, measures CO2 concentration using an MHZ19B module and displays values on…
62 parts - 2 layers78 × 37 mm

Akku 3V3 Versorgung
yvolodym/18650-3v3-supply
KiCad: stabile 3,3-V-Versorgung aus 18650-Li-Ion-Akku – TP4056-Ladung, DW01A/FS8205A-Schutz, MT3608-Boost, AP2112K-LDO
32 partsCERN-OHL-S-2.0
Questions
How big is the HearingAid ESP PCB?
It measures 96.2 × 62.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HearingAid ESP use?
108 parts, built around the ESP32-S3, AP2112K-3.3, DW01A and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HearingAid ESP KiCad files?
From the AveryLion03/HearingAid repository on GitHub, at the commit this page was made from: the board is KiCad/HearingAid_ESPV3/HearingAid_ESP/HearingAid_ESP.kicad_pcb and its schematic KiCad/HearingAid_ESPV1/HearingAid_ESP.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HearingAid ESP design in my own project?
Its repository states no licence, so its author keeps all rights: ask AveryLion03 before reusing the design.