

Feather
feather
- Size
- 22.9 × 58.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 98
- Nets
- 140
- Pads
- 574
- Tracks, vias
- 0, 0
- Pours
- 2
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Jun 2023
- Updated
- 30 Jun 2023
Overview
Feather is an open-source printed circuit board by hlord2000, from the hlord2000/feather-nrf7002 repository on GitHub. It is a 4-layer board of 22.9 × 58.6 mm with 98 parts on 140 nets.
It is built around the TPS22917DBV, USBLC6-2SC6 and ECS-.327-6-12-TR9, with the XRCGB32M000F1S1AR0, XRCGB40M000F1S1BR0 and BGS12P2L6 among its other parts. Its parts include 53 capacitors, 9 resistors, 8 inductors, 6 ICs and 6 connectors. It belongs with the microcontroller boards and power boards and the nRF52 and nRF5x boards of this library.
Main components
9TPS22917DBV
SOT-23-6-40℃~+125℃ 0V~5.5V 1 2A 80mΩ Active High Load Switch Output discharge function、Soft-start、Reverse current blocking SOT-23-6 Power Distribution Switches ROHSTexas InstrumentsPower Distribution SwitchesUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)ECS-.327-6-12-TR9
SMD2012-2PCrystalsECSXRCGB32M000F1S1AR0
SMD2016-4PSMD2016-4P Crystals ROHSMurataCrystalsXRCGB40M000F1S1BR0
SMD2016-4P-30℃~+85℃ 40MHz 50Ω 8pF ±10ppm ±10ppm SMD2016-4P Crystals ROHSMurataCrystalsBGS12P2L6
TSLP-6-4TSLP-6-4 New Arrivals ROHSInfineon TechnologiesUncategorised2450AD14A5500T
0603-40℃~+85℃ 1dBi、4dBi 2W 50Ω 0603 Antennas ROHSJohanson DielectricsAntennasDPX105950DT-6112A2
SMD-4P,1x0.5mm-40℃~+85℃ 10dB 10dB 2.4GHz~2.5GHz 23dB 32dB 4.9GHz~5.95GHz SMD-4P,1x0.5mm Duplexers ROHSTDKSignal Switches, Multiplexers, DecodersDMG1012UW-7-VB
SC-70-3SC-70-3 MOSFETs ROHSVBsemi ElecMOSFETs
README
README.mdnRF7002/nRF5340 in Feather Formfactor
- SD Card
- Onboard flash
- STEMMA Qt/Qwiic I2C connector
- USB-C
- nPM1300 regulator/battery charger
Parts
98| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 1u | Capacitor_SMD:C_0402_1005Metric | C4, C6, C9, C10, C11, C12, C19, C21, C33, C38, C45, C46, C59 |
| 8 | 100n | Capacitor_SMD:C_0201_0603Metric | C13, C14, C15, C16, C17, C22, C35, C47 |
| 6 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C8, C20, C32, C36, C37, C50 |
| 5 | 10u | Capacitor_SMD:C_0402_1005Metric | C1, C2, C5, C7, C57 |
| 4 | 2.2u | Capacitor_SMD:C_0402_1005Metric | C3, C34, C40, C48 |
| 4 | 5.1k | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6 |
| 4 | 8p | Capacitor_SMD:C_0201_0603Metric | C53, C54, C55, C56 |
| 2 | 0.47u | Capacitor_SMD:C_0201_0603Metric | C39, C42 |
| 2 | 10u | Inductor_SMD:L_0603_1608Metric | L2, L3 |
| 2 | 12p | Capacitor_SMD:C_0201_0603Metric | C30, C31 |
| 2 | 1A PTC | Fuse:Fuse_0402_1005Metric | F1, F2 |
| 2 | 2.2n | Inductor_SMD:L_0201_0603Metric | L7, L8 |
| 2 | 2.2u | Inductor_SMD:L_0805_2012Metric | L1, L6 |
| 2 | 2.54mm Header | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4, J6 |
| 2 | C_Small | Capacitor_SMD:C_0201_0603Metric | C24, C25 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP3 |
| 1 | 0.22u | Capacitor_SMD:C_0201_0603Metric | C41 |
| 1 | 0.7p | Capacitor_SMD:C_0201_0603Metric | C28 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C58 |
| 1 | 10n | Capacitor_SMD:C_0201_0603Metric | C44 |
| 1 | 2.2n | Capacitor_SMD:C_0201_0603Metric | C18 |
| 1 | 22n | Capacitor_SMD:C_0201_0603Metric | C43 |
| 1 | 3.3u | Inductor_SMD:L_0201_0603Metric | L5 |
| 1 | 3.3u | Inductor_SMD:L_0603_1608Metric | L9 |
| 1 | 32.768KHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y3 |
| 1 | 32MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y2 |
| 1 | 33 | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 360k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 40MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | Adafruit_Feather_Generic | module-lib:Thing-Plus-Sparkfun | A1 |
| 1 | BGS12P2L6 | rf-lib:BGS12P2L6 | SW1 |
| 1 | Battery_Cell | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | BT1 |
| 1 | Capacitor_SMD:C_0402_1005Metric | rf-lib:2450AD14A5500 | AE1 |
| 1 | Conn_01x04_MountingPin | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J3 |
| 1 | DPX105950DT-6112A2 | rf-lib:DPX105950DT-6112A2 | DPLX1 |
| 1 | FerriteBead_Small | Inductor_SMD:L_0402_1005Metric | FB1 |
| 1 | LED_ARGB | LED_SMD:LED_SK6812_EC15_1.5x1.5mm | D1 |
| 1 | LED_Small | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | MX25R3235FZNxx1 | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4mm | U7 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | Connector_Card:microSD_HC_Hirose_DM3D-SF | J5 |
| 1 | N.C. | Capacitor_SMD:C_0201_0603Metric | C29 |
| 1 | Q_PMOS_GSD | Package_TO_SOT_SMD:SOT-323_SC-70 | Q2 |
| 1 | TPS22917DBV | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | nPM1300-QEXX | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm_ThermalVias | U3 |
| 1 | nRF5340-CLXX | nordic-lib-kicad-nrf53:BGA-132_12x11_4.39x3.994mm | U2 |
| 1 | nRF7002-QFXX | nordic-lib-kicad-nrf7:QFN-48_EP_6x6_Pitch0.4mm | U8 |
Similar boards
- 2 layers96.2 × 62.4 mm

- 4 layers75 × 25 mm

- 4 layers15.9 × 33.8 mm

- 4 layers75 × 25 mm

- 4 layers100 × 60 mm

- 2 layers80 × 100 mm

- 4 layers95 × 55.5 mm

EinkPDA keyboard
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
137 parts2kApache-2.0 - 2 layers65 × 30 mm

Noisesource psu
dkozel/noisesource-psu
USB powered and controlled supply for RF Noise Sources
45 parts3
Questions
How big is the Feather PCB?
It measures 22.9 × 58.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Feather use?
98 parts, built around the TPS22917DBV, USBLC6-2SC6, ECS-.327-6-12-TR9 and XRCGB32M000F1S1AR0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Feather KiCad files?
From the hlord2000/feather-nrf7002 repository on GitHub, at the commit this page was made from: the board is feather.kicad_pcb and its schematic Connectivity.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Feather design in my own project?
Its repository states no licence, so its author keeps all rights: ask hlord2000 before reusing the design.