
Study Tracker
Its a Study tracker that helps you be productive while studying along with maintaining a day wise log online on the website hosted on the ESP32 itself
- Size
- 95.3 × 36.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 64
- Pads
- 197
- Tracks, vias
- 327, 25
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 15 Jul 2026
- Updated
- 13 Sep 2026
Overview
Study Tracker is an open-source printed circuit board by ANSHUMANDOCX, from the ANSHUMANDOCX/ESP32-LCD-Study-Tracker repository on GitHub. It is a 2-layer board of 95.3 × 36.5 mm with 37 parts on 64 nets, routed with 327 tracks and 25 vias.
It is built around the ESP32-WROOM-32E, CH343P and ME6217C33M5G, with the SS8050 among its other parts. Its parts include 10 capacitors, 10 resistors, 5 switches, 3 ICs and 3 connectors. It belongs with the ESP32 boards of this library.
Main components
4ESP32-WROOM-32E
SMD,18x25.5mmSMD,18x25.5mm WiFi Modules ROHSEspressif SystemsWiFi ModulesCH343P
TQFN-16-EP(3x3)-40℃~+85℃ 3.3V、5V 3mA 6Mbps 90uA USB 2.0 USB to UART TQFN-16-EP(3x3) USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersME6217C33M5G
SOT-23-5-40℃~+85℃ 1 100uA 180mV@(300mA) 3.3V 6.5V 65dB@(1kHz) 800mA Fixed Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdESP32-LCD-Study-Tracker
Its a Compact Server based study tracker using a OLED display and a ESP32 that help one track their study/work time on particular subjects and also lets use set a target using the interactive web page hosted on the ESP
Parts used
- Esp32 Wroom
- 1602 LCD Display
- PCB with onboard programmer
Why i made this
This device is made to solve one of the problems i face while studying i keep on getting distracted while i do something and using this device i will be able to keep track of my productive hours so i can get a reality check on long i think i am productive vs how long i actually am !!.
Features
- The system uses Display to set timer and keep track of your productive hours. It also has a webpage hosted on the ESP that helps you check on the hours spent at a glance. Also one can set target for the day how much time one needs to be productive for.
- It also has a Log system that logs the time we have spent on something and helps us keep track of how productive one has been. It also has a option to download the log all together as a csv file.
- There is a header for Connecting the LCD using I2C
- There are 3 Buttons for controlling the Display 'Start' , 'Stop' and , 'Change'.
- We can long press the STOP button to turnoff the backlight of the lcd since it could be distracting for some of us.
Programming
The code is very simple you will need to import the project in platform io and once flash the system image to load the website on the ESP and next upload the main.c file thats it. Also the subject/ Topic one needs to focus on is under a placeholder so anyone can change it according to their needs.
PCB and Schematic and CAD
Build
https://youtu.be/7US3xBiMZxA?si=RdkPRtCYgrZsQL8k
https://youtu.be/MXmio46lXlo?si=qvKTUyI2eKW5zzEd
BOM
| Serial No | Product name | Quantity | Supplier | Price | Total | Link |
|---|---|---|---|---|---|---|
| 1 | RC06 | |||||
| 03JR-070RL | 100 | LCSC | $0.0034 | $0.34 | LCSC | |
| 2 | ME6217C33M5G | 5 | LCSC | $0.1219 | $0.61 | LCSC |
| 3 | CH343P | 1 | LCSC | $1.1227 | $1.12 | LCSC |
| 4 | ESP32-WROOM-32E-N4 | 1 | LCSC | $3.7668 | $3.77 | LCSC |
| 5 | TS-1088-AR02016 | 10 | LCSC | $0.0531 | $0.53 | LCSC |
| 6 | GT-TC060A-H025-L1S | 5 | LCSC | $0.0929 | $0.46 | LCSC |
| 7 | FRC0603F2201TS | 100 | LCSC | $0.0022 | $0.22 | LCSC |
| 8 | FRC0603F5101TS | 100 | LCSC | $0.0021 | $0.21 | LCSC |
| 9 | RC0603FR-0710KL | 100 | LCSC | $0.0040 | $0.40 | LCSC |
| 10 | CL10B104KB8NNNC | 200 | LCSC | $0.0118 | $2.36 | LCSC |
| 11 | FRC0603F1001TS | 100 | LCSC | $0.0029 | $0.29 | LCSC |
| 12 | SS8050 | 50 | LCSC | $0.0100 | $0.50 | LCSC |
| 13 | TYPE-C 16PIN 2MD(073) | 20 | LCSC | $0.0707 | $1.41 | LCSC |
| 14 | GRM188R60J476ME15D | 5 | LCSC | $0.1934 | $0.97 | LCSC |
| 15 | CL10A475KP8NNNC | 50 | LCSC | $0.0199 | $1.00 | LCSC |
| 16 | CL10B105KA8NNNC | 10 | LCSC | $0.0216 | $0.22 | LCSC |
| 17 | CL10A106KP8NNNC | 20 | LCSC | $0.0353 | $0.71 | LCSC |
| 18 | PCB | 1 | JLC | $2 | $2 | JLC |
| 19 | LCD Display | 1 | Robu | $2 | $2 | Robu |
| TOTAL | 20 |
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R13, R14 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C14, C23 |
| 3 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1, SW2, SW5 |
| 2 | 0.1 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R15 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R17 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5, D6 |
| 2 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW3, SW4 |
| 1 | 104 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C19 |
| 1 | 4.7uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17 |
| 1 | 47uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C22 |
| 1 | CH343P | Package_DFN_QFN:WCH_QFN-16-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | ESP32-WROOM-32E | RF_Module:ESP32-WROOM-32D | U1 |
| 1 | ME6217C33M5G | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | R_Potentiometer_Small | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J4 |
| 1 | WC1602A | Display:WC1602A | DS1 |
Similar boards
- 2 layers33.2 × 40 mm

- 2 layers31.6 × 46 mm

- 4 layers52 × 73 mm

Conference Badge
Dheemanth0207/Electronic-Conference-Badge
This project investigates the design and development of a smart, energy-efficient electronic conference badge intended to replace traditional printed name tags used at events and meetings.
51 parts - 2 layers98 × 56.3 mm

ESP32 HUB
ANSHUMANDOCX/ESP32-Touch-Hub
This is a Esp32 Hub that has a 3.5 inch tft touch screen
77 parts - 4 layers76 × 88 mm

- 2 layers40 × 89.5 mm

Mono
jmcpheron/pico-quorum
Several people, several keys, one Safe. Hardware approvals for Safe multisig wallets.
89 partsMIT - 2 layers90.2 × 90 mm

Sra dev board 2026
SRA-VJTI/sra-board-hardware-design
ESP32-based Development Board for Robotics and Embedded Applications
219 parts81MIT - 4 layers136.4 × 77.8 mm

Mother
emiirkaya/ThermovitalSync-PCB
A PCB project for a vital monitoring-cooling device with GUI
99 parts2MIT
Questions
How big is the Study Tracker PCB?
It measures 95.3 × 36.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Study Tracker use?
37 parts, built around the ESP32-WROOM-32E, CH343P, ME6217C33M5G and SS8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Study Tracker KiCad files?
From the ANSHUMANDOCX/ESP32-LCD-Study-Tracker repository on GitHub, at the commit this page was made from: the board is PCB/Study Tracker.kicad_pcb and its schematic PCB/Study Tracker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Study Tracker design in my own project?
Its repository states no licence, so its author keeps all rights: ask ANSHUMANDOCX before reusing the design.