

EspBredBoard
My first custom esp board
- Size
- 31.6 × 46 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 71
- Pads
- 209
- Tracks, vias
- 348, 76
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Nov 2024
- Updated
- 26 Dec 2024
Overview
EspBredBoard is an open-source printed circuit board by mengxyz, from the mengxyz/esp32_S2_breadboard repository on GitHub. It is a 2-layer board of 31.6 × 46 mm with 32 parts on 71 nets, routed with 348 tracks and 76 vias.
It is built around the ESP32-S2-WROOM-I(4MB), CH343P and ME6217C33M5G, with the TS-1145A-B-A, 1N4148WS and WS2812B-2020 among its other parts. Its parts include 9 resistors, 8 capacitors, 5 connectors, 4 diodes and 3 ICs. It belongs with the ESP32 boards of this library.
Main components
6ESP32-S2-WROOM-I(4MB)
-- WiFi Modules ROHSEspressif SystemsWiFi ModulesCH343P
TQFN-16-EP(3x3)-40℃~+85℃ 3.3V、5V 3mA 6Mbps 90uA USB 2.0 USB to UART TQFN-16-EP(3x3) USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersME6217C33M5G
SOT-23-5-40℃~+85℃ 1 100uA 180mV@(300mA) 3.3V 6.5V 65dB@(1kHz) 800mA Fixed Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTS-1145A-B-A
SMD-4P,4.2x3.2mm-30℃~+85℃ 1.6N 100,000 cycles 12V 2.5mm 3.2mm 4.2mm 50mA No Oval Button SPST Surface Mount,Vertical White Without Bracket SMD-4P,4.2x3.2mm Tactile Switches ROHSXKB ConnectionTactile Switches1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching DiodesWS2812B-2020
SMD,2.2x2mm0.6mA 0.84mm 120us 160mcd 200mcd 2kHz 2mm 2mm 300ns 470.4nm 515.6nm 520mcd 5V 622.5nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit、Integrated intelligent reverse connection protection function Top-mount SMD,2.2x2mm RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
README
readme.mdEsp32 S2 Breadboard
| front | back |
|---|---|
![]() | ![]() |
Specs
- 1 UART
- 1 OTG
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C7, C8 |
| 4 | 300 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R7, R9 |
| 4 | 5.1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R5, R6 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C6 |
| 2 | Conn_01x17 | Connector_PinHeader_2.54mm:PinHeader_1x17_P2.54mm_Vertical | J3, J4 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3 |
| 2 | TS-1145A-B-A | Library:SW-SMD_4P-L4.2-W3.2-P2.15-LS5.2 | SW1, SW2 |
| 2 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1, J2 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 1 | 1N4148WS | Diode_SMD:D_SOD-323_HandSoldering | D1 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 1 | 800mA | Fuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1 |
| 1 | CH343P | Library:TQFN-16_L3.0-W3.0-P0.50-BL-EP1.7 | U1 |
| 1 | ESP32-S2-WROOM-I(4M) | Library:WIFI-SMD_ESP32-S2-WROVER-I | U2 |
| 1 | ME6217C33M5G | Library:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | U3 |
| 1 | UART_TEST_POINT | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | WS2812B-2020 | Library:LED-SMD_4P-L2.0-W2.0-TL_WS2812B-2020 | LED1 |
Similar boards
- 2 layers33.2 × 40 mm

- 2 layers95.3 × 36.5 mm

Study Tracker
ANSHUMANDOCX/ESP32-LCD-Study-Tracker
Its a Study tracker that helps you be productive while studying along with maintaining a day wise log online on the website hosted on the ESP32 itself
37 parts - 4 layers40 × 58.5 mm

- 2 layers85 × 100 mm

- 4 layers89.8 × 64 mm

- 2 layers80.2 × 99 mm

AT ProtoKeeb rev1
atechofficials/protokeeb
Open Source 16-Key Mechanical Keyboard with rotary encoder and ARGB backlight. Powered by Raspberry Pi Pico. Supports QMK, KMK and ZMK Keyboard Firmware.
114 parts1MIT - 4 layers45.6 × 45.6 mm

- 4 layers68 × 60 mm

RoboCore V2
Plastal-Bot-Builders/RoboCoreDocumentation
RoboCore is a classroom robot kit and coding platform, designed and built in Zambia by Plastal-Bot Builders (Lusaka).
146 partsMIT
Questions
How big is the EspBredBoard PCB?
It measures 31.6 × 46 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EspBredBoard use?
32 parts, built around the ESP32-S2-WROOM-I(4MB), CH343P, ME6217C33M5G and TS-1145A-B-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EspBredBoard KiCad files?
From the mengxyz/esp32_S2_breadboard repository on GitHub, at the commit this page was made from: the board is EspBredBoard.kicad_pcb and its schematic EspBredBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EspBredBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask mengxyz before reusing the design.

