

ESP32 HUB
This is a Esp32 Hub that has a 3.5 inch tft touch screen
- Size
- 98 × 56.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 77
- Nets
- 85
- Pads
- 307
- Tracks, vias
- 655, 147
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 22 Apr 2026
- Updated
- 15 Jun 2026
Overview
ESP32 HUB is an open-source printed circuit board by ANSHUMANDOCX, from the ANSHUMANDOCX/ESP32-Touch-Hub repository on GitHub. It is a 2-layer board of 98 × 56.3 mm with 77 parts on 85 nets, routed with 655 tracks and 147 vias.
It is built around the CH340C, ESP32-S3-WROOM-1-N8 and MT3608, with the DW01A, ME6217C33M5G and SS34 among its other parts. Its parts include 25 resistors, 21 capacitors, 9 diodes, 6 ICs and 5 transistors. It belongs with the ESP32 boards of this library.
Main components
10CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesMT3608
SOT-23-6-40℃~+85℃ 1 1.2MHz 100uA、1.6mA 2A 2V~24V Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHS西安航天民芯DC-DC ConvertersDW01A
SOT-23-6L-40℃~+85℃ 1 2.5V 300mV~10V 3uA 4.3V Protection IC Support SOT-23-6L Battery Management ROHSPUOLOPBattery ManagementME6217C33M5G
SOT-23-5-40℃~+85℃ 1 100uA 180mV@(300mA) 3.3V 6.5V 65dB@(1kHz) 800mA Fixed Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesSS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsMMBT2222A
SOT-23-55℃~+150℃ 1 NPN 100 100nA 1V 300MHz 300mW 40V 600mA 6V NPN Standalone SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
README
README.mdESP32-S3 Smart Hub
Description
This is a ESP32-S3 Based HUB paired with a touch screen that can be used for anything that one wants but for me i will be using it to connect all my ESP32 project and control it from one place and get a whole lot more connected experience between my project.
Parts Used
- ESP32 S3 Used as the brains of the system
- CH340C for onboard programming.
- 3.5" ILI9488 SPI touch display (MSP3520 module) for UI interaction
- Battery-powered with USB-C charging and intelligent load sharing
- Onboard SD card for storing web assets, UI resources, and sensor logs
- 3 tactile buttons + passive buzzer for physical interaction and alerts
- Charging status indicators both physical and UI based
Technicals
- The board will have dual volages 5V and 3.3v for the TFT and ESP32.
- It uses a load sharing circuit where when the battery is charging the board will be powered from the USB
- I will pair a 1800mah Lipo Battery so i can get a considerable amount of battery life.
- the board is using a MT3608 and ME6217C33M5G ics for 5v and 3.3v regulator along with a MCP73833 for charging the battery
Firmware
THe code is tested just put your wifi and password and its ready to go
PCB SCHEMATIC and CAD
BUILD
Demo Link https://youtube.com/shorts/PqJHbwtBgcA
BOM
| Product Name | Quantity | Price ($) | Vendor |
|---|---|---|---|
| ME6217C33M5G 3.3V LDO Regulator | 1 | 0.30 | Sharvi Electronics |
| ESP32-S3-WROOM-1 N16R8 | 1 | 4.51 | Sharvi Electronics |
| FS8205A Dual N-Channel MOSFET | 1 | 0.80 | Sharvi Electronics |
| DW01A Battery Protection IC | 1 | 0.55 | Sharvi Electronics |
| MT3608 Step-Up Converter IC | 1 | 0.85 | Sharvi Electronics |
| Micro SD Card Socket 9-Pin SMD | 1 | 0.60 | Sharvi Electronics |
| MCP73833 Li-Ion Charger IC | 1 | 1.93 | Robu.in |
| AO3401 P-Channel MOSFET | 1 | 0.37 | Robu.in |
| 3.5" TFT Touchscreen Display | 1 | 11.62 | Techiesms |
| Passives (Resistors, Capacitors, Pull-ups, etc.) | Assorted | 8 | Sharvi Electronics |
| PCB | 2 | ALLPCB | |
| SHIPPING | 1 | ||
| Total | 35 |
Parts
77| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14, R15, R18, R19, R27, R28 |
| 6 | LED | LED_SMD:LED_0603_1608Metric | D3, D4, D5, D6, D8, D13 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C13, C14, C15, C16 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4 |
| 3 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R11, R21 |
| 3 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R6, R12 |
| 3 | SW_Push | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-100x | SW1, SW4, SW5 |
| 2 | 0.1 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C8 |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R22 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R23 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18, C20 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C23 |
| 2 | 22uf | Capacitor_SMD:C_0603_1608Metric | C11, C12 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C9, C10 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R17 |
| 2 | SS34 | Diode_SMD:D_SMA | D2, D7 |
| 2 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW2, SW3 |
| 1 | 10K Therm | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 22uH | EasyEDA_Lib:IND-SMD_L4.0-W4.0 | L1 |
| 1 | 2K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C19 |
| 1 | 4.7uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17 |
| 1 | 470R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20 |
| 1 | 750k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J1 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | MCP73833-xxx-UN | Package_SO:MSOP-10_3x3mm_P0.5mm | U3 |
| 1 | ME6217C33M5G | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q5 |
| 1 | MSP3520 | easyeda2kicad:MSP3520 | LCD1 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | ~ | EasyEDA_Lib:TSSOP-8_L4.4-W3.0-P0.65-LS6.4-BL-2 | Q4 |
| 1 | ~ | EasyEDA_Lib:TF-SMD_TF-CARD-H1.8 | TF1 |
Similar boards
- 2 layers102.6 × 102.6 mm

- 2 layers49.4 × 95.7 mm

- 2 layers62 × 6 mm

TableLight
jonny190/TableLight
A 3D-printable, battery-powered, USB-C rechargeable table lamp in the classic "Poldina" shape - honeycomb disc base, thin stem, down-firing cone shade with a white top - running WLED on an ESP32, with a capacitive touch…
72 partsMIT - 4 layers90 × 95 mm

Wiegand bridge
EdgeCoil/wiegand-bridge
ESP32-S3 Wiegand reader bridge for Home Assistant: 4-layer board, BOM and ESPHome firmware.
197 parts1 - 4 layers102.7 × 77.6 mm

Espcam
mazyacin/espcam-breakout-board
high end espcam breackout board for IOT and monetering
64 partsMIT - 2 layers74.5 × 89.8 mm

- 4 layers

- 2 layers68 × 47.4 mm

Air quality monitor
ajkumar-1907/POWER-ELECTRONICS-LIB
Open-source library of power electronics converter topologies — KiCad schematics, working principles, use cases, and design notes for DC-DC, AC-DC, DC-AC, and AC-AC converters. Free to use, modify, and build on.
59 parts1MIT
Questions
How big is the ESP32 HUB PCB?
It measures 98 × 56.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32 HUB use?
77 parts, built around the CH340C, ESP32-S3-WROOM-1-N8, MT3608 and DW01A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32 HUB KiCad files?
From the ANSHUMANDOCX/ESP32-Touch-Hub repository on GitHub, at the commit this page was made from: the board is PCB/ESP32 HUB.kicad_pcb and its schematic PCB/ESP32 HUB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32 HUB design in my own project?
Its repository states no licence, so its author keeps all rights: ask ANSHUMANDOCX before reusing the design.