

Layer1
eighty seventy-six's RCJ Soccer 2022 Team Repository
- Size
- 178 × 169.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 130
- Nets
- 121
- Pads
- 411
- Tracks, vias
- 1,283, 273
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 9 Apr 2022
- Updated
- 18 Jun 2022
Overview
Layer1 is an open-source printed circuit board by 8076ducc, from the 8076ducc/robocup-2022 repository on GitHub. It is a 2-layer board of 178 × 169.8 mm with 130 parts on 121 nets, routed with 1,283 tracks and 273 vias.
It is built around the STM32F103CBT6 and CD74HC4067M. Its parts include 46 resistors, 35 diodes, 15 ICs, 5 connectors and 4 capacitors. It belongs with the STM32 boards of this library.
Main components
2STM32F103CBT6
LQFP-48(7x7)-40℃~+85℃ 128KB 12bit 20KB 2V~3.6V 32 Bit 37 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)CD74HC4067M
SOIC-24-300mil-55℃~+125℃ 16 160Ω 16:1 22ns 2V~6V 345ns 365ns 89MHz Bidirectional analog channel、Glitch-free switching SOIC-24-300mil Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
Parts
130| Qty | Value | Footprint | References |
|---|---|---|---|
| 35 | LED | OF-SMD3528WC:LED_OF-SMD3528WC | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +19 |
| 35 | R_Photo | ALS-PT19-315C_L177_TR8:XDCR_ALS-PT19-315C_L177_TR8 | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +19 |
| 7 | 10k | Resistors:0603 | R38, R40, R42, SOLENOIDR1, SOLENOIDR2, U0R2, U0R44 |
| 4 | 1µF | Capacitors:0603 | U0C1, U0C2, U0C3, U0C4 |
| 3 | 0.1µF | Capacitors:0603 | C1, C2, C3 |
| 3 | 1k | Resistors:0603 | SOLENOIDR3, U0R1, U0R19 |
| 3 | 3k | Resistors:0603 | R37, R39, R41 |
| 3 | CD74HC4067M | Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm | U1, U2, U3 |
| 3 | Conn_01x02_Female | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J0, J1, J2 |
| 3 | Conn_01x02_Female | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | BOOSTJ1, BOOSTJ2, SOLENOIDJ1 |
| 2 | 20pF | Capacitors:0603 | U0C5, U0C6 |
| 2 | 30Ω/1.8A | Capacitors:0603 | U0FB1, U0FB2 |
| 2 | Conn_01x01_Female | Connector_Wire:14AWG | J3, J4 |
| 2 | Conn_01x11_Male | Connectors:1X11_LOCK | MJ1, MJ2 |
| 2 | SW_SPDT | Switches:SWITCH_SPDT_PTH_11.6X4.0MM_LOCK | SW1, SW2 |
| 1 | 0.39 | Resistors:0603 | LIGHTR1 |
| 1 | 1000µF/63V | Capacitor_THT:CP_Radial_D16.0mm_P7.50mm | C4 |
| 1 | 1500pF | Capacitors:0603 | SOLENOIDC1 |
| 1 | 1N4728 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | SOLENOIDD2 |
| 1 | 1N5401 | Diode_THT:D_DO-27_P15.24mm_Horizontal | SOLENOIDD1 |
| 1 | 1µf | Capacitors:0603 | LIGHTC1 |
| 1 | 20 | Resistors:0603 | SOLENOIDR4 |
| 1 | 4.7k | Resistors:0603 | R36 |
| 1 | BLUE | LED:LED-0603 | U0D1 |
| 1 | Conn_01x02_Male | Connectors:1X02_LOCK | GATE1D1 |
| 1 | Conn_01x03_Female | Connectors:1X03_LOCK | BUCKJ1 |
| 1 | Conn_01x05_Female | Connector_JST:JST_SH_BM05B-SRSS-TB_1x05-1MP_P1.00mm_Vertical | TRJ1 |
| 1 | Conn_01x06_Female | Connector_JST:JST_SH_BM06B-SRSS-TB_1x06-1MP_P1.00mm_Vertical | U0J1 |
| 1 | Conn_01x08_Female | Connector_JST:JST_SH_BM08B-SRSS-TB_1x08-1MP_P1.00mm_Vertical | TRJ2 |
| 1 | Crystal | Clocks:CRYSTAL-SMD-5X3.2-2PAD | U0Y1 |
| 1 | MOSFET-NCH-AO3404A | Silicon-Standard:SOT23-3 | SOLENOIDQ1 |
| 1 | MOSFET-NCH-FQP30N06L | Package_TO_SOT_THT:TO-220-3_Vertical | SOLENOIDQ2 |
| 1 | R_Photo | Connectors:1X02_LOCK | GATE1R1 |
| 1 | STM32F103CBT6 | STM32F103CBT6:QFP50P900X900X160-48N | U0 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW3 |
The 129 most common of 130 parts.
More from 8076ducc/robocup-2022
4- 2 layers178 × 169.8 mm

- 2 layers100 × 160.2 mm

- 2 layers69 × 34 mm

- 2 layers178 × 140.5 mm

Similar boards
- 2 layers45 × 23 mm

Tiny
pengshulin/mcush
MCUSH application platform (personal toolkit: firmware platform, debugger, hardware, test and application framework)
53 parts103 - 2 layers82 × 134 mm

Pcb badge
john0312/hitcon-pcb-badge
execute fw/merge.py to merge STM32CubeIDE generated main.c with user code in main.cc into main.cc.
258 parts47BSD-3-Clause - 2 layers128 × 47 mm

Stm32f1-nrf24l01-transmitter pcb
laneboysrc/rc-headless-transmitter
DIY 2.4 GHz RC transmitter without display, configurable through smartphone or web browser
79 parts33 - 4 layers31 × 15 mm

- 4 layers39 × 40.5 mm

WirelessJLink V3S
hkustenterprize/RM2025-Wireless-JLink
Wireless JLink-OB based on Allwinner V3S
147 parts30GPL-3.0 - 4 layers56 × 43.3 mm

- 2 layers25.4 × 50.8 mm

Stm32....c breakout
electroniceel/stm32....c-breakout
A breakout module for STM32 microcontrollers in LQFP48 and UFQFPN48 footprint.
59 parts20CC-BY-4.0 - 2 layers149.5 × 43.8 mm

Usb external monitor
dilshan/usb-external-display
USB 10 digit seven segment display unit
71 parts16MIT
Questions
How big is the Layer1 PCB?
It measures 178 × 169.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Layer1 use?
130 parts, built around the STM32F103CBT6 and CD74HC4067M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Layer1 KiCad files?
From the 8076ducc/robocup-2022 repository on GitHub, at the commit this page was made from: the board is electrical design/layer1/layer1.kicad_pcb and its schematic electrical design/driver - left/driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Layer1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask 8076ducc before reusing the design.