
HEXBERRY V-20Q100
logitiles/HEXBERRY-V-20Q100-0.91
Open Hardware FPGA platform

execute fw/merge.py to merge STM32CubeIDE generated main.c with user code in main.cc into main.cc.
Pcb badge is an open-source printed circuit board by john0312, from the john0312/hitcon-pcb-badge repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 82 × 134 mm with 258 parts on 125 nets, routed with 2,496 tracks and 307 vias.
It is built around the STM32F103CBT6, QX2304L33F and 74HC238D, with the IRM-H638T/TR2, LSM6DS3TR-C and JSM2301S among its other parts. Its parts include 141 diodes, 50 resistors, 23 capacitors, 20 transistors and 8 switches. It belongs with the lEDs and displays boards and the STM32 boards of this library.
execute fw/merge.py to merge STM32CubeIDE generated main.c with user code in main.cc into main.cc.
In STM32CubeIDE, go to Project > Build Configurations > Set Active > V1.1 / V2.0 / V2.1 / V2.2 to switch between hardware versions.
Then go to Run > Run Configurations choose the correct Run Configuration
There are different firmware versions for each hardware revision.
To identify your hardware version, check the back of your badge.
| Peripheral | Memory | |
|---|---|---|
| Increment Address | X | V |
| Data Width | Half Word | Half Word |
| Peripheral | Memory | |
|---|---|---|
| Increment Address | X | V |
| Data Width | Half Word | Half Word |
| Peripheral | Memory | |
|---|---|---|
| Increment Address | X | V |
| Data Width | Word | Word |
| Peripheral | Memory | |
|---|---|---|
| Increment Address | X | V |
| Data Width | Half Word | Half Word |
Cross-board communication TX: USART2 TX, DMA1 Ch7
Cross-board communication RX: USART2 RX, DMA1 Ch6
TIM4: Operates at 100Hz for Button
TIM3: Operates at 38kHz for PWM out.
TIM2:
TIM1:
To check format, please install clang-format first.
# under hitcon-pcb-badge
./lint.sh # check format
./lint.sh -i # auto format| Qty | Value | Footprint | References |
|---|---|---|---|
| 128 | LED | LED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D00, D01, D02, D03, D04, D05, D06, D07, D10, D100, D101, D102, D103, D104, D105, D106 +112 |
| 17 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q9, Q90, Q91, Q92, Q93, Q94, Q95, Q96, Q97, Q98, Q910, Q911, Q912, Q913, Q914, Q915 +1 |
| 10 | 0.1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C21, C30, C31, C32, C33, C40, C50, C51, C80 |
| 8 | 100k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5, R6, R7, R16, R17, R18, R19, R52 |
| 8 | 300 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R90, R91, R92, R93, R94, R95, R96, R97 |
| 8 | SW_MEC_5E | myLib:SOIC4_TL3301SPF160RGTAPE_EWI | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 7 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C20, C22, C23, C24, C25, C26, C92 |
| 7 | 470 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8, R9, R21, R31, R32, R33, R34 |
| 7 | NC | LED_SMD:LED_PLCC_2835_Handsoldering | D160, D162, D163, D164, D165, D166, D167 |
| 6 | NC | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R22, R29, R30, R35, R36, R53 |
| 5 | 4.7k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R20, R50, R51, R54 |
| 5 | NC | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R162, R163, R165, R166, R167 |
| 2 | 0 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10, R23 |
| 2 | 10M | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R11 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C11 |
| 2 | 20R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2 |
| 2 | 20p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C37, C38 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R24, R25 |
| 2 | 74HC238 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U4, U8 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4, J5 |
| 2 | JSM2301S | Package_TO_SOT_SMD:SOT-23 | Q2, Q50 |
| 2 | SOD4007-MS | Diode_SMD:D_SOD-123F | D2, D18 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R61 |
| 1 | 110R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R164 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R14 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C60 |
| 1 | BAT_2 | myLib:BH-AAA-B5AK001 | BT1 |
| 1 | CYL104R-33UH | Inductor_SMD:L_10.4x10.4_H4.8 | L20 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Conn_01x02_Pin | Connector:JWT_A3963_1x02_P3.96mm_Vertical | J2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | DEALON USB-TYPE-C-018 | myLib:DEALON USB-TYPE-C-018 | J1 |
| 1 | IRM-H638T/TR2 | myLib:IRM-H638T | U6 |
| 1 | LSM6DS3TR-C | myLib:QFN_S3TR-C_STM | U5 |
| 1 | NC | Diode_SMD:D_SOD-323_HandSoldering | D1 |
| 1 | NC | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | NC | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C34 |
| 1 | NEWOPTO XYC-IRA2835A90-X4 | LED_SMD:LED_PLCC_2835_Handsoldering | D161 |
| 1 | NSR0320MW2T1G | Diode_SMD:D_SOD-323_HandSoldering | D9 |
| 1 | QX2304L33F | myLib:SOT-23-5 | U2 |
| 1 | SI2302 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | STM32F103CBT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | TAXM8M4RFDCET2T | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y1 |
| 1 | TLV70328DBVR | myLib:SOT-23-5 | U1 |

logitiles/HEXBERRY-V-20Q100-0.91
Open Hardware FPGA platform



joshajohnson/louise
A project between Josh and RiotPunch to build a 75% alice keyboard with a southpaw numpad.

jemmec/legshark
An open source 60% (15 by 5) ortholinear keyboard designed with both flexability and familiarity in mind.



It measures 82 × 134 mm and has 2 copper layers, 1.6 mm thick.
258 parts, built around the STM32F103CBT6, QX2304L33F, 74HC238D and IRM-H638T/TR2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the john0312/hitcon-pcb-badge repository on GitHub, at the commit this page was made from: the board is pcb/kicad/pcb_badge/pcb_badge.kicad_pcb and its schematic pcb/kicad/pcb_badge/LED Matrix.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).