Skip to the content
PCBKitNew board
TLC272CD on a board, in 3D

TLC272CD

Texas Instruments

0.7pA 0℃~+70℃ 1.8uV/℃ 10mV 2 2.2MHz 25nV/√Hz@1kHz 3.6mA 300pA 30mA 3V~16V 5.3V/us 80dB ESD protection Rail-to-rail input SOIC-8 Operational Amplifier ROHS

Extended
DatasheetJLCPCBLCSCti/TLC272CD
Category
Operational Amplifier
Package
SOIC-8
Pins
8

Overview

The TLC272CD is an operational Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. 0.7pA 0℃~+70℃ 1.8uV/℃ 10mV 2 2.2MHz 25nV/√Hz@1kHz 3.6mA 300pA 30mA 3V~16V 5.3V/us 80dB ESD protection Rail-to-rail input SOIC-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:TLC272, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 20,661 are in stock at JLCPCB (part C9374). 25 open-source boards in 22 repositories on GitHub use it.

Symbol

1-2+3
Amplifier_Operational:TLC272From KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Parameters

15
Common Mode Rejection Ratio(CMRR)
80dB
Features
ESD Protection
Gain Bandwidth Product
2.2MHz
Ib - Input Bias Current
0.7pA
Input Offset Current(Ios)
300pA
Input Offset Voltage Drift(Vos TC)
1.8uV/℃
Input Voltage Noise Density
25nV/√Hz@1kHz
Number of Channels
2
Operating Temperature
0℃~+70℃
Output Current
30mA
Quiescent Current
3.6mA
Rail to Rail
Rail-to-rail input
Single supply
3V~16V
Slew Rate
5.3V/us
Vos - Input Offset Voltage
10mV

Order codes

3

Pinout

8
The pins of the TLC272CD
PinNameType
1—Output
2-Input
3+Input
4V-Power in
5+Input
6-Input
7—Output
8V+Power in

Open-source boards using it

All 25
  • 2 layers85 × 61 mmGBDSO, the printed circuit board in 3D

    GBDSO

    pyroesp/GBDSO

    Game Boy DSO Project revived in KiCad

    78 parts79
  • 2 layers200 × 87.8 mmSonus7 rev1, the printed circuit board in 3D

    Sonus7 rev1

    BasementCircuits/Sonus7

    Analog seven-band spectrum bargraph with op amps.

    263 parts6
  • 2 layers52.3 × 51.8 mmReBlast, the printed circuit board in 3D

    ReBlast

    SukkoPera/ReBlast

    8-Bit DAC/ADC Add-On for Commodore 16/Plus4 SIDcards

    27 parts6
  • 2 layers92.5 × 99.7 mmOpamp vu meter, the printed circuit board in 3D

    Opamp vu meter

    CASE-Association/christmas-cards

    All CASE christmas cards over the years

    48 parts3GPL-3.0
  • 2 layers50 × 40.9 mmGR ATTiny LFO, the printed circuit board in 3D

    GR ATTiny LFO

    GadgetReboot/ATTiny_LFO

    Dual low frequency oscillators using ATTiny and MCP4725 DACs

    36 parts3
  • 2 layers56.5 × 74 mmAscom flat panel, the printed circuit board in 3D

    Ascom flat panel

    letelescope/ascom-flat-panel

    Open source ASCOM and INDI driven automated flat panel for astrophotography

    17 parts2MIT
  • 2 layers43.5 × 46.9 mmSchaltplan Ultraschallsensor, the printed circuit board in 3D

    Schaltplan Ultraschallsensor

    Tinkerforge/distance-us-v2-bricklet-techniker

    This repository contains the firmware source code and the hardware design files. The documentation generator configs can be found at https://github.com/Tinkerforge/generators

    54 parts2
  • 2 layers85 × 56.5 mmMotherboard, the printed circuit board in 3D

    Motherboard

    BryggansBryggeri/electrical

    Electronics, hardware schematics

    34 parts1

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/ti/TLC272CD" title="TLC272CD in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/ti/TLC272CD.jpg" alt="TLC272CD" width="1200" height="900">
A picture that opens the part, for a README
[![TLC272CD](https://pcbkit.io/embed/parts/ti/TLC272CD.jpg?size=s)](https://pcbkit.io/parts/ti/TLC272CD)

Questions

Is there a KiCad symbol and footprint for the TLC272CD?

Yes. The symbol is Amplifier_Operational:TLC272 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLC272CD?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the TLC272CD datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLC272CD?

JLCPCB lists it as part C9374, with 20,661 in stock; the sellers' links on this page open their listings.

What can replace the TLC272CD?

Parts like it in the library: the LM358D by onsemi, the LM2904D by onsemi, the NE5532D by Texas Instruments and the LM358D by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLC272CD?

25 boards in 22 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8