2 layers92 × 94.5 mm
LM358D
onsemiJLCPCB basic
-16V~16V 0℃~+70℃ 2 3V~32V 40mA 45nA 5nA 700uA 70dB 7mV 7uV/℃ Built-in compensation、ESD protection SOIC-8 Operational Amplifier ROHS
- Part id
- onsemi/LM358D
- Category
- Operational Amplifier
- Package
- SOIC-8
- Pins
- 8
- In stock
- 556,378 at JLCPCB (C7950)
- Used on
- 14 open-source boards
Overview
The LM358D is an operational Amplifier made by onsemi in a SOIC-8 package with 8 pins. -16V~16V 0℃~+70℃ 2 3V~32V 40mA 45nA 5nA 700uA 70dB 7mV 7uV/℃ Built-in compensation、ESD protection SOIC-8 Operational Amplifier ROHS.
PCBKit's library has its KiCad symbol (Amplifier_Operational:LM358, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 556,378 are in stock at JLCPCB (part C7950). 14 open-source boards in 14 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
9- Supply, least
- 3 V · VCC, single supply operating min · p. 1
- Supply, most
- 32 V · VCC, single supply operating max · p. 1
- Supply, absolute maximum
- 32 V · VCC, single supply absolute max · p. 3
- Works from
- 0 °C · operating ambient min, LM358 · p. 3
- Works up to
- 70 °C · operating ambient max, LM358 · p. 3
- Junction, hottest
- 150 °C · junction temperature max · p. 3
- Takes working
- 700 µA · typical total device supply current, VCC = 5 V, no load · p. 4
- Takes at most
- 3 mA · max total device supply current, VCC = 30 V, no load · p. 4
- Junction to air (Case 751)
- 212 K/W · junction to air, evaluation board with minimum pad size · p. 3
What it is and has
5- Protection
- Short circuit protected outputs · p. 1
- Input stage
- True differential · p. 1
- Compensation
- Internal · p. 1
- Common mode range
- Extends to negative supply · p. 1
- Supply operation
- Single and split supply · p. 1
Specifications
36| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Power Supply Voltages VCC | Single Supply; TA = +25°C | max 32 Vdc | 3 |
| Power Supply Voltages VCC, VEE | Split Supplies; TA = +25°C | min -16 · max 16 Vdc | 3 |
| Input Differential Voltage Range (Note 1) VIDR | Split Power Supplies; TA = +25°C | min -32 · max 32 Vdc | 3 |
| Input Common Mode Voltage Range (Note 2) VICR | TA = +25°C; for supply voltages less than 32 V the absolute maximum input voltage equals the supply voltage | min -0.3 · max 32 Vdc | 3 |
| Junction Temperature TJ | max 150 °C | 3 | |
| Thermal Resistance, Junction−to−Air (Note 3) RJA | Case 751; evaluation board with 1 oz. copper traces of minimum pad size; all device outputs active | max 212 °C/W | 3 |
| Storage Temperature Range Tstg | min -65 · max 150 °C | 3 | |
| ESD Protection at any Pin Vesd | Human Body Model | max 2000 V | 3 |
| ESD Protection at any Pin Vesd | Machine Model | max 200 V | 3 |
| Operating Ambient Temperature Range TA | LM358 | min 0 · max 70 °C | 3 |
| Input Offset Voltage VIO | LM358; VCC = 5.0 V to 30 V, VIC = 0 V to VCC −1.7 V, VO ] 1.4 V, RS = 0 Ω; TA = 25°C | typ 2 · max 7 mV | 4 |
| Input Offset Voltage VIO | LM358; VCC = 5.0 V to 30 V, VIC = 0 V to VCC −1.7 V, VO ] 1.4 V, RS = 0 Ω; TA = Thigh = +70°C | max 9 mV | 4 |
| Input Offset Voltage VIO | LM358; VCC = 5.0 V to 30 V, VIC = 0 V to VCC −1.7 V, VO ] 1.4 V, RS = 0 Ω; TA = Tlow = 0°C | max 9 mV | 4 |
| Average Temperature Coefficient of Input Offset Voltage VIO/T | LM358; TA = Thigh to Tlow, 0°C to +70°C; VCC = 5.0 V, VEE = GND | typ 7 V/°C | 4 |
| Input Offset Current IIO | LM358; VCC = 5.0 V, VEE = GND, TA = 25°C | typ 5 · max 50 nA | 4 |
| Input Offset Current IIO | LM358; VCC = 5.0 V, VEE = GND; TA = Thigh to Tlow, 0°C to +70°C | max 150 nA | 4 |
| Input Bias Current IIB | LM358; VCC = 5.0 V, VEE = GND, TA = 25°C | typ -45 · max -250 nA | 4 |
| Input Bias Current IIB | LM358; VCC = 5.0 V, VEE = GND; TA = Thigh to Tlow, 0°C to +70°C | typ -50 · max -500 nA | 4 |
| Average Temperature Coefficient of Input Offset Current IIO/T | LM358; VCC = 5.0 V, VEE = GND; TA = Thigh to Tlow, 0°C to +70°C | typ 10 pA/°C | 4 |
| Input Common Mode Voltage Range (Note 6) VICR | LM358; VCC = 30 V, VEE = GND, TA = 25°C | min 0 · max 28.3 V | 4 |
| Input Common Mode Voltage Range (Note 6) VICR | LM358; VCC = 30 V, VEE = GND; TA = Thigh to Tlow, 0°C to +70°C | min 0 · max 28 V | 4 |
| Large Signal Open Loop Voltage Gain AVOL | LM358; RL = 2.0 kΩ, VCC = 15 V, For Large VO Swing; TA = 25°C | min 25 · typ 100 V/mV | 4 |
| Large Signal Open Loop Voltage Gain AVOL | LM358; RL = 2.0 kΩ, VCC = 15 V, For Large VO Swing; TA = Thigh to Tlow, 0°C to +70°C | min 15 V/mV | 4 |
| Channel Separation CS | LM358; 1.0 kHz ≤ f ≤ 20 kHz, Input Referenced; VCC = 5.0 V, VEE = GND, TA = 25°C | typ -120 dB | 4 |
| Common Mode Rejection CMR | LM358; RS ≤ 10 kΩ; VCC = 5.0 V, VEE = GND, TA = 25°C | min 65 · typ 70 dB | 4 |
| Power Supply Rejection PSR | LM358; VCC = 5.0 V, VEE = GND, TA = 25°C | min 65 · typ 100 dB | 4 |
| Output Voltage−High Limit VOH | LM358; VCC = 5.0 V, RL = 2.0 kΩ, TA = 25°C | min 3.3 · typ 3.5 V | 4 |
| Output Voltage−High Limit VOH | LM358; VCC = 30 V, RL = 2.0 kΩ; TA = Thigh to Tlow, 0°C to +70°C | min 26 V | 4 |
| Output Voltage−High Limit VOH | LM358; VCC = 30 V, RL = 10 kΩ; TA = Thigh to Tlow, 0°C to +70°C | min 27 · typ 28 V | 4 |
| Output Voltage−Low Limit VOL | LM358; VCC = 5.0 V, RL = 10 kΩ; TA = Thigh to Tlow, 0°C to +70°C | typ 5 · max 20 mV | 4 |
| Output Source Current IO+ | LM358; VID = +1.0 V, VCC = 15 V, TA = 25°C | min 20 · typ 40 mA | 4 |
| Output Sink Current IO− | LM358; VID = −1.0 V, VCC = 15 V, TA = 25°C | min 10 · typ 20 mA | 4 |
| Output Sink Current IO− | LM358; VID = −1.0 V, VO = 200 mV; VCC = 5.0 V, VEE = GND, TA = 25°C | min 12 · typ 50 A | 4 |
| Output Short Circuit to Ground (Note 7) ISC | LM358; VCC = 5.0 V, VEE = GND, TA = 25°C | typ 40 · max 60 mA | 4 |
| Power Supply Current (Total Device) ICC | LM358; VCC = 30 V, VO = 0 V, RL = ∞; TA = Thigh to Tlow, 0°C to +70°C | typ 1.5 · max 3 mA | 4 |
| Power Supply Current (Total Device) ICC | LM358; VCC = 5 V, VO = 0 V, RL = ∞; TA = Thigh to Tlow, 0°C to +70°C | typ 0.7 · max 1.2 mA | 4 |
Pins, by the datasheet
8- 1 Output A
- Amplifier A output. · p. 1
- 2 Inputs A
- Amplifier A inverting input. · p. 1
- 3 Inputs A
- Amplifier A noninverting input. · p. 1
- 4 VEE/Gnd
- Negative supply or ground. · p. 1
- 5 Inputs B
- Amplifier B noninverting input. · p. 1
- 6 Inputs B
- Amplifier B inverting input. · p. 1
- 7 Output B
- Amplifier B output. · p. 1
- 8 VCC
- Positive supply. · p. 1
- 2 layers170 × 64 mm
- 2 layers160 × 84 mm
SB LOGICBOARD V01
wvdv2002/SMA-SB2500-Off-Grid
Try to open source the grid tie solar inverter SMA Sunny Boy SB2500
119 parts11 - 2 layers15.7 × 20.8 mm
- 2 layers
- 2 layers25 × 99 mm
Cremini blade atmega328p
nicklasfrahm/mykilio
Mykilio is the proposal for a new Living Standard with the goal to reimagine infrastructure management and monitoring.
102 parts1MIT - 2 layers101.6 × 53.3 mm
ARDUINO MEGA. SOLOMON
Solomon-Menney/ARDUINO-MEGA
The Custom Arduino Mega is an open-source hardware project developed as a custom implementation of the Arduino Mega platform.
69 parts - 2 layers47.5 × 85 mm
DigitEco POWER DE
r-map/rmap
rete monitoraggio ambientale partecipativo documentation at https://doc.rmap.cc
55 parts55
Parts like it
8
LM2904D
SOIC-8-16V~16V -40℃~+105℃ 1.5mA 2 2mV 3V~32V 40mA 45nA 50nA 70dB 7uV/℃ Built-in compensation、ESD protection SOIC-8 Operational Amplifier ROHSonsemiOperational AmplifierLM358DT
SO-80℃~+70℃ 1.1MHz 1.2mA 2 200nA 30nA 30uV/℃ 3V~30V 40mA 55nV/√Hz@1kHz 600V/ms 7mV 85dB Built-in compensation SO-8 Operational Amplifier ROHSSTMicroelectronicsOperational AmplifierTLV9062ID
SOIC-8-40℃~+125℃ 0.05pA 0.5pA 1.6mV 1.8V~5.5V 103dB 10MHz 10nV/√Hz@1kHz 2 50mA 530nV/℃ 538uA 6.5V/us Enable/shutdown function、ESD protection、EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLM2904DT
SOIC-8-40℃~+125℃ 1.1MHz 10pA/℃ 2 20nA 2mV 2nA 30V 3V~30V 40mA 55nV/√Hz@1kHz 600V/ms 700uA 7uV/℃ 85dB SOIC-8 Operational Amplifier ROHSSTMicroelectronicsOperational AmplifierTS922IDT
SO-8-40℃~+125℃ 1.3V/us 100nA 12V 2 2.7V~12V 2mA 2uV/℃ 30nA 3mV 4MHz 80dB 80mA 9nV/√Hz@1kHz Rail-to-Rail Input, Rail-to-Rail Output SO-8 Operational Amplifier ROHSSTMicroelectronicsOperational AmplifierLMV358B-SR
SOIC-8-40℃~+125℃ 100mA 1MHz 1pA 1pA 2 2.5V~5.5V 2uV/℃ 35nV/√Hz@1kHz 4mV 700V/ms 80uA 85dB Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHS3PEAKOperational AmplifierAS358AMTR-E1
SOIC-8-18V~-1.5V、1.5V~18V -40℃~+85℃ 2 20nA 2mV 3V~36V 40mA 500uA 5nA 70dB 7uV/℃ Built-in compensation SOIC-8 Operational Amplifier ROHSDiodes IncorporatedOperational AmplifierAS358MTR-E1
SOIC-8-18V~-1.5V、1.5V~18V -40℃~+85℃ 2 20nA 2mV 30nA 3V~36V 40mA 500uA 70dB 7uV/℃ Built-in compensation SOIC-8 Operational Amplifier ROHSDiodes IncorporatedOperational Amplifier
Questions
Is there a KiCad symbol and footprint for the LM358D?
Yes. The symbol is Amplifier_Operational:LM358 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LM358D?
SOIC-8, with 8 pins. Its footprint is drawn on this page.
Where is the LM358D datasheet?
onsemi publishes it: the Datasheet link on this page opens it.
Where can I order the LM358D?
JLCPCB lists it as part C7950, with 556,378 in stock; the sellers' links on this page open their listings.
What can replace the LM358D?
Parts like it in the library: the LM2904D by onsemi, the LM358DT by STMicroelectronics, the TLV9062ID by Texas Instruments and the LM2904DT by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the LM358D?
14 boards in 14 repositories on GitHub; the most starred are listed on this page, with their KiCad files.