
PCA9306DCUR
Texas InstrumentsExtended
-40℃~+85℃ 1 1.2V~3.3V 1.8V~5.5V 2 Auto Direction Detection Bidirectional Push-Pull、Open-drain VSSOP-8 Translators, Level Shifters ROHS
- Part id
- ti/PCA9306DCUR
- Category
- Translators, Level Shifters
- Package
- VSSOP-8
- Pins
- 8
- In stock
- 985 at JLCPCB (C33196)
- Used on
- 21 open-source boards
Overview
The PCA9306DCUR is a translators, Level Shifter made by Texas Instruments in a VSSOP-8 package with 8 pins. -40℃~+85℃ 1 1.2V~3.3V 1.8V~5.5V 2 Auto Direction Detection Bidirectional Push-Pull、Open-drain VSSOP-8 Translators, Level Shifters ROHS.
PCBKit's library has its KiCad symbol (Interface:PCA9306, from KiCad's library) and its footprint (Package_SO:VSSOP-8_2.3x2mm_P0.5mm, from KiCad's library), ready for a KiCad board. 985 are in stock at JLCPCB (part C33196). 21 open-source boards in 16 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
8- Supply, most
- 5.5 V · VREF1, recommended operating max; translation requires VREF1 ≤ VREF2 − 0.6 V · p. 5
- Supply, absolute maximum
- 7 V · VREF1, absolute max · p. 5
- Works from
- -40 °C · TA, operating ambient min · p. 5
- Works up to
- 85 °C · TA, operating ambient max · p. 5
- Junction, hottest
- 125 °C · junction temperature absolute max · p. 5
- Junction to air (DCU)
- 275.5 K/W · junction-to-ambient thermal resistance · p. 6
- Junction to case (DCU)
- 127.1 K/W · junction-to-case top thermal resistance · p. 6
- Junction to board (DCU)
- 186.9 K/W · junction-to-board thermal resistance · p. 6
What it is and has
3- Voltage translation
- Dual bidirectional I2C and SMBus translator with enable input · p. 10
- Direction control
- Bidirectional translation without a direction pin · p. 1
- Package
- VSSOP, 8 pins; DCU · p. 4
Around it
1- res 200-kΩ
- between VREF2 / EN and VCC2; Short EN and VREF2 together; connect this node to VCC2 through the resistor to limit bias current. · p. 10
Specifications
57| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| DC reference voltage range VREF1 | over operating ambient temperature range | min -0.5 · max 7 V | 5 |
| DC reference bias voltage range VREF2 | over operating ambient temperature range | min -0.5 · max 7 V | 5 |
| Input voltage range VI | over operating ambient temperature range; negative voltage rating may be exceeded if current ratings are observed | min -0.5 · max 7 V | 5 |
| Input/output voltage range VI/O | over operating ambient temperature range; negative voltage rating may be exceeded if current ratings are observed | min -0.5 · max 7 V | 5 |
| Continuous channel current | over operating ambient temperature range | max 128 mA | 5 |
| Input clamp current IIK | VI < 0 | max -50 mA | 5 |
| Maximum junction temperature Tj(max) | max 125 °C | 5 | |
| Storage temperature range Tstg | min -65 · max 150 °C | 5 | |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; ±2000 V | max 2000 V | 5 |
| Electrostatic discharge V(ESD) | Charged device model (CDM), per ANSI/ESDA/JEDEC JS-0011, all pins; ±1000 V | max 1000 V | 5 |
| Input/output voltage VI/O | SCL1, SDA1, SCL2, SDA2 | min 0 · max 5.5 V | 5 |
| Reference voltage VREF1 | To support translation: 1.2 V to VREF2 - 0.6 V | min 0 · max 5.5 V | 5 |
| Reference voltage VREF2 | To support translation: VREF1 + 0.6 V to 5.5 V | min 0 · max 5.5 V | 5 |
| Enable input voltage EN | min 0 · max 5.5 V | 5 | |
| Pass switch current IPASS | max 64 mA | 5 | |
| Operating ambient temperature TA | min -40 · max 85 °C | 5 | |
| Junction-to-ambient thermal resistance RθJA | DCU, 8 PINS | typ 275.5 °C/W | 6 |
| Junction-to-case (top) thermal resistance RθJC(top) | DCU, 8 PINS | typ 127.1 °C/W | 6 |
| Junction-to-board thermal resistance RθJB | DCU, 8 PINS | typ 186.9 °C/W | 6 |
| Junction-to-top characterization parameter ψJT | DCU, 8 PINS | typ 65.7 °C/W | 6 |
| Junction-to-board characterization parameter ψJB | DCU, 8 PINS | typ 185.9 °C/W | 6 |
| Input clamp voltage VIK | II = –18 mA, EN = 0 V | min -1.2 · max 0 V | 6 |
| Input leakage current IIH | VI = 5 V, EN = 0 V | max 5 uA | 6 |
| Input capacitance Ci (EN) | VI = 3 V or 0 | typ 11 pF | 6 |
| Off capacitance Cio(off) | SCLn, SDAn; VO = 3 V or 0, EN = 0 V | typ 4 · max 6 pF | 6 |
| On capacitance Cio(on) | SCLn, SDAn; VO = 3 V or 0, EN = 3 V | typ 10.5 · max 12.5 pF | 6 |
| On-state resistance RON | SCLn, SDAn; VI = 0, IO = 64 mA, EN = 4.5 V | typ 3.5 · max 5.5 Ω | 6 |
| On-state resistance RON | SCLn, SDAn; VI = 0, IO = 64 mA, EN = 3 V | typ 4.7 · max 7 Ω | 6 |
| On-state resistance RON | SCLn, SDAn; VI = 0, IO = 64 mA, EN = 2.3 V | typ 6.3 · max 9.5 Ω | 6 |
| On-state resistance RON | SCLn, SDAn; VI = 0, IO = 15 mA, EN = 1.5 V | typ 25.5 · max 32 Ω | 6 |
| On-state resistance RON | SCLn, SDAn; VI = 2.4 V, IO = 15 mA, EN = 4.5 V; current sink configuration only | min 1 · typ 6 · max 15 Ω | 6 |
| On-state resistance RON | SCLn, SDAn; VI = 2.4 V, IO = 15 mA, EN = 3 V; current sink configuration only | min 20 · typ 60 · max 140 Ω | 6 |
| On-state resistance RON | SCLn, SDAn; VI = 1.7 V, IO = 15 mA, EN = 2.3 V; current sink configuration only | min 20 · typ 60 · max 140 Ω | 6 |
| tPLH tPLH | DCU; SCL2 or SDA2 to SCL1 or SDA1; EN = 3.3 V, VIH = 3.3 V, VIL = 0, VM = 1.15 V; CL = 50 pF | min 0 · max 0.8 ns | 7 |
| tPLH tPLH | DCU; SCL2 or SDA2 to SCL1 or SDA1; EN = 3.3 V, VIH = 3.3 V, VIL = 0, VM = 1.15 V; CL = 30 pF | min 0 · max 0.6 ns | 7 |
| tPLH tPLH | DCU; SCL2 or SDA2 to SCL1 or SDA1; EN = 3.3 V, VIH = 3.3 V, VIL = 0, VM = 1.15 V; CL = 15 pF | min 0 · max 0.3 ns | 7 |
| tPHL tPHL | DCU; SCL2 or SDA2 to SCL1 or SDA1; EN = 3.3 V, VIH = 3.3 V, VIL = 0, VM = 1.15 V; CL = 50 pF | min 0 · max 1.2 ns | 7 |
| tPHL tPHL | DCU; SCL2 or SDA2 to SCL1 or SDA1; EN = 3.3 V, VIH = 3.3 V, VIL = 0, VM = 1.15 V; CL = 30 pF | min 0 · max 1 ns | 7 |
| tPHL tPHL | DCU; SCL2 or SDA2 to SCL1 or SDA1; EN = 3.3 V, VIH = 3.3 V, VIL = 0, VM = 1.15 V; CL = 15 pF | max 0.75 ns | 7 |
| tPLH tPLH | DCU; SCL2 or SDA2 to SCL1 or SDA1; EN = 2.5 V, VIH = 3.3 V, VIL = 0, VM = 0.75 V; CL = 50 pF | min 0 · max 1 ns | 7 |
| tPLH tPLH | DCU; SCL2 or SDA2 to SCL1 or SDA1; EN = 2.5 V, VIH = 3.3 V, VIL = 0, VM = 0.75 V; CL = 30 pF | min 0 · max 0.7 ns | 7 |
| tPLH tPLH | DCU; SCL2 or SDA2 to SCL1 or SDA1; EN = 2.5 V, VIH = 3.3 V, VIL = 0, VM = 0.75 V; CL = 15 pF | min 0 · max 0.4 ns | 7 |
| tPHL tPHL | DCU; SCL2 or SDA2 to SCL1 or SDA1; EN = 2.5 V, VIH = 3.3 V, VIL = 0, VM = 0.75 V; CL = 50 pF | min 0 · max 1.3 ns | 7 |
| tPHL tPHL | DCU; SCL2 or SDA2 to SCL1 or SDA1; EN = 2.5 V, VIH = 3.3 V, VIL = 0, VM = 0.75 V; CL = 30 pF | min 0 · max 1 ns | 7 |
| tPHL tPHL | DCU; SCL2 or SDA2 to SCL1 or SDA1; EN = 2.5 V, VIH = 3.3 V, VIL = 0, VM = 0.75 V; CL = 15 pF | max 0.75 ns | 7 |
| tPLH tPLH | DCU; SCL1 or SDA1 to SCL2 or SDA2; EN = 3.3 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 1.15 V, RL = 300 Ω; CL = 50 pF | min 0 · max 0.9 ns | 7 |
| tPLH tPLH | DCU; SCL1 or SDA1 to SCL2 or SDA2; EN = 3.3 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 1.15 V, RL = 300 Ω; CL = 30 pF | min 0 · max 0.6 ns | 7 |
| tPLH tPLH | DCU; SCL1 or SDA1 to SCL2 or SDA2; EN = 3.3 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 1.15 V, RL = 300 Ω; CL = 15 pF | min 0 · max 0.4 ns | 7 |
| tPHL tPHL | DCU; SCL1 or SDA1 to SCL2 or SDA2; EN = 3.3 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 1.15 V, RL = 300 Ω; CL = 50 pF | max 1.7 ns | 7 |
| tPHL tPHL | DCU; SCL1 or SDA1 to SCL2 or SDA2; EN = 3.3 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 1.15 V, RL = 300 Ω; CL = 30 pF | max 1.4 ns | 7 |
| tPHL tPHL | DCU; SCL1 or SDA1 to SCL2 or SDA2; EN = 3.3 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 1.15 V, RL = 300 Ω; CL = 15 pF | max 1 ns | 7 |
| tPLH tPLH | DCU; SCL1 or SDA1 to SCL2 or SDA2; EN = 2.5 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 0.75 V, RL = 300 Ω; CL = 50 pF | min 0 · max 1 ns | 7 |
| tPLH tPLH | DCU; SCL1 or SDA1 to SCL2 or SDA2; EN = 2.5 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 0.75 V, RL = 300 Ω; CL = 30 pF | min 0 · max 0.6 ns | 7 |
| tPLH tPLH | DCU; SCL1 or SDA1 to SCL2 or SDA2; EN = 2.5 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 0.75 V, RL = 300 Ω; CL = 15 pF | min 0 · max 0.4 ns | 7 |
| tPHL tPHL | DCU; SCL1 or SDA1 to SCL2 or SDA2; EN = 2.5 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 0.75 V, RL = 300 Ω; CL = 50 pF | max 2.1 ns | 7 |
| tPHL tPHL | DCU; SCL1 or SDA1 to SCL2 or SDA2; EN = 2.5 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 0.75 V, RL = 300 Ω; CL = 30 pF | max 1.7 ns | 7 |
| tPHL tPHL | DCU; SCL1 or SDA1 to SCL2 or SDA2; EN = 2.5 V, VIH = 2.3 V, VIL = 0, VT = 3.3 V, VM = 0.75 V, RL = 300 Ω; CL = 15 pF | max 1.3 ns | 7 |
Pins, by the datasheet
8- 1 GND
- Ground, 0 V. · p. 4
- 2 VREF1
- Low-voltage-side reference supply voltage for SCL1 and SDA1. · p. 4
- 3 SCL1
- Serial clock, low-voltage side. · p. 4
- 4 SDA1
- Serial data, low-voltage side. · p. 4
- 5 SDA2
- Serial data, high-voltage side. · p. 4
- 6 SCL2
- Serial clock, high-voltage side. · p. 4
- 7 VREF2
- High-voltage-side reference supply voltage for SCL2 and SDA2. · p. 4
- 8 EN
- Switch enable input. · p. 4
- 4 layers80 × 35 mm

- 2 layers76 × 76 mm

- 6 layers50 × 50 mm

Xmos xu316
youheng7185/xmos_xu316_cs43131_usb_aud
uac 2.0 on xmos xu316 with cs43131 audio codec
93 parts3 - 4 layers35.1 × 58.3 mm

- 2 layers90 × 65 mm

Hackeriot board 2025
bmeisels/hackeriot_board
Hackeriot Board is a research target for learning about Hardware Reverse Engineering. The board was used as part of the Hardware Reverse Engineering workshop at the 2024 conference.
116 parts1 - 4 layers50 × 20 mm

- 4 layers25 × 30 mm

Smove r2-main
okbrainhq/sMove
Applied to power.kicadsch, compute.kicadsch and smove-r2-main.kicadsch:
53 parts1MIT - 4 layers64.6 × 55.2 mm

Whisker
HeyPCB/whisker
Drop-in controller for Petoi's Nybble robot cat running the stock OpenCat firmware: ATmega328P, PCA9685, MPU-6050, USB-C, 3 A buck, protected battery input. 4-layer KiCad 10 board plus printed cradle.
118 partsCERN-OHL-S-2.0
Parts like it
8TXB0102DCU
VSSOP-8-0.5mm-40℃~+85℃ 1 1.2V~3.6V 1.65V~5.5V 100Mbps 2 Auto Direction Detection Bidirectional CMOS CMOS Tri-State VSSOP-8-0.5mm Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersTCA9406DCUR
VSSOP-8-0.5mm-40℃~+85℃ 1 1.65V~3.6V 2 2.3V~5.5V 24Mbps Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Open-drain SMBus、I2C、UART VSSOP-8-0.5mm Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersTXS0102DCUR
VSSOP-8-40℃~+85℃ 1 1.65V~3.6V 2 2.3V~5.5V 24Mbps Auto Direction Detection Bidirectional Push-Pull、Open-drain VSSOP-8 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersTXU0202DCU
VSSOP-8-40℃~+125℃ 1 1.08V~5.5V 1.08V~5.5V 12mA 12mA 2 200Mbps Bidirectional Level translator Output enable high-impedance、Integrated pull-up resistor SPI、JTAG、UART Tri-State VSSOP-8 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersLSF0102DCUR
VSSOP-8-0.5mm-40℃~+125℃ 1 1.8V~5.5V 2 950mV~4.5V Automatic direction detection、Output enable high-impedance Bidirectional Level translator Push-Pull、Open-drain SMBus、I2C、UART TTL TTL VSSOP-8-0.5mm Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersSN74AXC2T45DCU
VSSOP-8-0.5mm-40℃~+125℃ 1 2 380Mbps 650mV~3.6V 650mV~3.6V Bidirectional CMOS CMOS Power-Off Protection Push-Pull VSSOP-8-0.5mm Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersTXU0102DCU
VSSOP-8-40℃~+125℃ 1 1.08V~5.5V 1.08V~5.5V 2 200Mbps Level translator Power-off protection、Output enable high-impedance SPI、JTAG、UART Tri-State Unidirectional VSSOP-8 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersTCA39306DCU
VSSOP-8-40℃~+125℃ 1 1.65V~5.5V 2 850mV~5.5V Bidirectional Open Drain VSSOP-8 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
Questions
Is there a KiCad symbol and footprint for the PCA9306DCUR?
Yes. The symbol is Interface:PCA9306 and the footprint Package_SO:VSSOP-8_2.3x2mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the PCA9306DCUR?
VSSOP-8, with 8 pins. Its footprint is drawn on this page.
Where is the PCA9306DCUR datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the PCA9306DCUR?
JLCPCB lists it as part C33196, with 985 in stock; the sellers' links on this page open their listings.
What can replace the PCA9306DCUR?
Parts like it in the library: the TXB0102DCU by Texas Instruments, the TCA9406DCUR by Texas Instruments, the TXS0102DCUR by Texas Instruments and the TXU0202DCU by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the PCA9306DCUR?
21 boards in 16 repositories on GitHub; the most starred are listed on this page, with their KiCad files.