
Hackeriot board 2024
bmeisels/hackeriot_board
Hackeriot Board is a research target for learning about Hardware Reverse Engineering. The board was used as part of the Hardware Reverse Engineering workshop at the 2024 conference.

Hackeriot Board is a research target for learning about Hardware Reverse Engineering. The board was used as part of the Hardware Reverse Engineering workshop at the 2024 conference.
Hackeriot board 2025 is an open-source printed circuit board by bmeisels, from the bmeisels/hackeriot_board repository on GitHub. It is a 2-layer board of 90 × 65 mm with 116 parts on 110 nets, routed with 1,326 tracks and 153 vias.
It is built around the HT16K33A-28SOP, AP2112K-3.3 and AT24C256C-SSHL-T, with the PCA9306DCUR among its other parts. Its parts include 66 diodes, 10 resistors, 7 switches, 6 capacitors and 6 connectors. It belongs with the STM32 boards of this library.
Hackeriot Board is a research target for learning about Hardware Reverse Engineering.
The board was used as part of the Hardware Reverse Engineering workshop at the 2024 conference.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 66 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +50 |
| 7 | SW_Push | hackeriot_board_2025:SW-SMD_4P-L6.0-W6.0-P4.50-LS9.0-2 | SW1, SW2, SW3, SW4, SW5, SW6, SW7 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R9, R10, R11 |
| 5 | LOGO | LOGO | G1, G2, G3, G4, G5 |
| 4 | MountingHole_2.7mm_M2.5_Pad | MountingHole:MountingHole_2.7mm_M2.5_Pad | mh1, MH2, mh3, mh4 |
| 4 | Tooling Hole | hackeriot_board_2025:Tooling Hole | TH1, TH2, TH3, TH4 |
| 3 | 100 nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C6, C8 |
| 3 | TestPoint_Probe | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP3 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 2 | Conn_01x03_Socket | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J3, J4 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 200K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 4.7 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 500 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | AT24C256C-SSHL-T | hackeriot_board_2025:SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U5 |
| 1 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J5 |
| 1 | Conn_02x08_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical | J2 |
| 1 | DebugEdge_02x05 | hackeriot_board_2025:DebugEdge_2x05_Target | J6 |
| 1 | HT16K33A-28SOP | hackeriot_board_2025:SOP-28_L17.9-W7.5-P1.27-LS10.3-BL | U2 |
| 1 | PCA9306DCUR | hackeriot_board_2025:SSOP-8_L2.0-W2.3-P0.50-LS3.1-BR | U4 |
| 1 | STM32G030C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J1 |

bmeisels/hackeriot_board
Hackeriot Board is a research target for learning about Hardware Reverse Engineering. The board was used as part of the Hardware Reverse Engineering workshop at the 2024 conference.

sihyun-noh/zephyr_485toSDI12
Zephyr RTOS 기반 Dajilog MCU 장비의 firmware, custom board 정의, 공통 component, KiCad hardware source를 함께 관리하는 repository입니다.



youheng7185/xmos_xu316_cs43131_usb_aud
uac 2.0 on xmos xu316 with cs43131 audio codec



okbrainhq/sMove
Applied to power.kicadsch, compute.kicadsch and smove-r2-main.kicadsch:

HeyPCB/whisker
Drop-in controller for Petoi's Nybble robot cat running the stock OpenCat firmware: ATmega328P, PCA9685, MPU-6050, USB-C, 3 A buck, protected battery input. 4-layer KiCad 10 board plus printed cradle.
It measures 90 × 65 mm and has 2 copper layers, 1.6 mm thick.
116 parts, built around the HT16K33A-28SOP, AP2112K-3.3, AT24C256C-SSHL-T and PCA9306DCUR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bmeisels/hackeriot_board repository on GitHub, at the commit this page was made from: the board is hardware/hackeriot_board_2025/hackeriot_board_2025.kicad_pcb and its schematic hardware/hackeriot_board_2024/hackeriot_board_2024.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask bmeisels before reusing the design.