Skip to the content
12345678

OPA340UA

Texas InstrumentsExtended

-40℃~+85℃ 0.2pA 1 10pA 2.5uV/℃ 2.7V~5.5V 25nV/√Hz@1kHz 5.5MHz 500uV 50mA 6V/us 750uA 92dB Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHS

Part id
ti/OPA340UA
Category
Operational Amplifier
Package
SOIC-8
Pins
8
In stock
0 at JLCPCB (C2869349)
Used on
7 open-source boards

Overview

The OPA340UA is an operational Amplifier made by Texas Instruments in a SOIC-8 package with 8 pins. -40℃~+85℃ 0.2pA 1 10pA 2.5uV/℃ 2.7V~5.5V 25nV/√Hz@1kHz 5.5MHz 500uV 50mA 6V/us 750uA 92dB Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:OPA340UA, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2869349). 7 open-source boards in 7 repositories on GitHub use it.

Symbol

2-3+4V-67V+
Amplifier_Operational:OPA340UAFrom KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the OPA340UA
PinNameType
1NCNot connected
2-Input
3+Input
4V-Power in
5NCNot connected
6—Output
7V+Power in
8NCNot connected

Open-source boards using it

7
  • 2 layers79.9 × 36.2 mmDesk display, the printed circuit board in 3D

    Desk display

    nepyope/Project-Homunculus

    Project Homunculus is open-source, low-cost hardware for capturing human hand and arm motions. It has two parts.

    63 parts51
  • 2 layers160 × 99.1 mmCarrier board editing, the printed circuit board in 3D

    Carrier board editing

    JQIamo/Eurocard_DDS

    DDS Controller designed for the DDS board with ad9910 at JQI

    68 parts3
  • 4 layers160 × 100.1 mmPMT counter 4 layers, the printed circuit board in 3D

    PMT counter 4 layers

    mmazzanti/PMT-counter

    A PCB board for counting pulses up to 1.5GHz from a PMT (or similar)

    126 parts3GPL-3.0
  • 2 layers65 × 30 mmBeerEyePi, the printed circuit board in 3D

    BeerEyePi

    beer-eye/electronics

    PCB and Schematics

    32 parts
  • 2 layers60 × 30 mmPiaggio Amp Circuit, the printed circuit board in 3D

    Piaggio Amp Circuit

    edWho/Piaggio-Fasts-Forward

    KiCAD test - Op Amp desgin

    20 parts
  • 2 layers36 × 100 mmCamera trigger, the printed circuit board in 3D

    Camera trigger

    vatral/nodemcu_camera_trigger

    Trigger for Pentax cameras based on sound, light and LIDAR

    41 partsGPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the OPA340UA?

Yes. The symbol is Amplifier_Operational:OPA340UA and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the OPA340UA?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the OPA340UA datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the OPA340UA?

JLCPCB lists it as part C2869349, with 0 in stock; the sellers' links on this page open their listings.

What can replace the OPA340UA?

Parts like it in the library: the TLV9062ID by Texas Instruments, the TS922IDT by STMicroelectronics, the LMV358B-SR by 3PEAK and the MC33178D by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the OPA340UA?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.