2 layers79.9 × 36.2 mm
Desk display
nepyope/Project-Homunculus
Project Homunculus is open-source, low-cost hardware for capturing human hand and arm motions. It has two parts.
63 parts51
2 layers60 × 30 mm
Piaggio Amp Circuit
edWho/Piaggio-Fasts-ForwardKiCAD test - Op Amp desgin
- Size
- 60 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 12
- Pads
- 47
- Tracks, vias
- 44, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 29 Jul 2017
- Updated
- 29 Jul 2017
Overview
Piaggio Amp Circuit is an open-source printed circuit board by edWho, from the edWho/Piaggio-Fasts-Forward repository on GitHub. It is a 2-layer board of 60 × 30 mm with 20 parts on 12 nets, routed with 44 tracks and 0 vias.
It is built around the OPA340UA and M20-9990345. Its parts include 3 capacitors, 3 resistors, 2 connectors, 1 IC and 1 diode. It belongs with the audio and music boards of this library.
Main components
2
OPA340UA
SOIC-8-40℃~+85℃ 0.2pA 1 10pA 2.5uV/℃ 2.7V~5.5V 25nV/√Hz@1kHz 5.5MHz 500uV 50mA 6V/us 750uA 92dB Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
M20-9990345
插件,P=2.54mm-40℃~+105℃ 1 2.54mm 2.54mm 3A 3P 3mm 6.1mm Black Brass Pin Header Through Hole 插件,P=2.54mm Pin Headers ROHSHarwinPin Headers
README
README.mdPiaggio-Fasts-Forward
KiCAD test - Op Amp desgin
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Mounting_Holes:MountingHole_3.2mm_M3_Pad | MTG1, MTG2, MTG3, MTG4 | |
| 3 | Fiducials:Fiducial_1mm_Dia_2.54mm_Outer_CopperBottom | FID1, FID2, FID3 | |
| 2 | 0.01nF | Capacitors_SMD:C_0603_HandSoldering | C1, C2 |
| 2 | 5k | Potentiometers:Potentiometer_Alps_RK09K_Horizontal | RV1, RV2 |
| 2 | M20-9990345 | Connectors_Samtec:SL-103-X-XX_1x03 | J1, J2 |
| 1 | 0 | Resistors_SMD:R_0603_HandSoldering | R3 |
| 1 | 0.1nF | Capacitors_SMD:C_0603_HandSoldering | C3 |
| 1 | 20V 500mA | Diodes_SMD:D_SOD-123 | D1 |
| 1 | 250mA | Capacitors_SMD:C_0603_HandSoldering | F1 |
| 1 | 3.3k | Resistors_SMD:R_0603_HandSoldering | R1 |
| 1 | 49.9 | Resistors_SMD:R_0603_HandSoldering | R5 |
| 1 | OPA340UA | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
Similar boards
- 2 layers160 × 99.1 mm
Carrier board editing
JQIamo/Eurocard_DDS
DDS Controller designed for the DDS board with ad9910 at JQI
68 parts3 - 4 layers160 × 100.1 mm
PMT counter 4 layers
mmazzanti/PMT-counter
A PCB board for counting pulses up to 1.5GHz from a PMT (or similar)
126 parts3GPL-3.0 - 2 layers65 × 30 mm
- 4 layers190 × 115 mm
Qrotx singleband transmitter
qrotx/qrotx-singleband-hw
Schematics and PCB design
95 partsCERN-OHL-S-2.0 - 2 layers36 × 100 mm
Camera trigger
vatral/nodemcu_camera_trigger
Trigger for Pentax cameras based on sound, light and LIDAR
41 partsGPL-3.0 - 4 layers68.6 × 53.3 mm
Arduino UNO R4 WiFi
sabogalc/KiCad-Arduino-Boards
A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.
262 parts95WTFPL - 4 layers65 × 100 mm
PGR
Projeto-Guarda-Rios/PCB
O repositório para a PCB do Projeto Guarda Rios! Inclui todos os ficheiros relacionados com a PCB!
188 parts2MIT
Questions
How big is the Piaggio Amp Circuit PCB?
It measures 60 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Piaggio Amp Circuit use?
20 parts, built around the OPA340UA and M20-9990345. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Piaggio Amp Circuit KiCad files?
From the edWho/Piaggio-Fasts-Forward repository on GitHub, at the commit this page was made from: the board is Piaggio Amp Circuit.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Piaggio Amp Circuit design in my own project?
Its repository states no licence, so its author keeps all rights: ask edWho before reusing the design.