Skip to the content
1234567

LP5912-3.3DRVT

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 12uVrms 3.3V 30uA 500mA 6.5V 75dB@(1kHz) 95mV@(500mA) Fixed PG Pin、Over Current Protection、Over Temperature Protection、Soft Start、Enable、Short Circuit Protection Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LP5912-3.3DRVT
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
WSON-6-EP(2x2)
Pins
7
In stock
482 at JLCPCB (C134121)
Used on
4 open-source boards

Overview

The LP5912-3.3DRVT is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a WSON-6-EP(2x2) package with 7 pins. -40℃~+125℃@(Tj) 1 12uVrms 3.3V 30uA 500mA 6.5V 75dB@(1kHz) 95mV@(500mA) Fixed PG Pin、Over Current Protection、Over Temperature Protection、Soft Start、Enable、Short Circuit Protection Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:LP5912-3.3DRV, from KiCad's library) and its footprint (Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm, from KiCad's library), ready for a KiCad board. 482 are in stock at JLCPCB (part C134121). 4 open-source boards in 3 repositories on GitHub use it.

Symbol

OUT1EN4GND5IN6PG3EP7
Regulator_Linear:LP5912-3.3DRVFrom KiCad's library

Footprint

1234567
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mmFrom KiCad's library

Pinout

7
The pins of the LP5912-3.3DRVT
PinNameType
1OUTPower out
2NCNot connected
3PGOpen collector
4ENInput
5GNDPower in
6INPower in
7EPPassive

Open-source boards using it

4
  • 4 layers46.8 × 34.8 mmSmartWatch V4, the printed circuit board in 3D

    SmartWatch V4

    Bellafaire/ESP32-Smart-Watch

    An open source smartwatch based on the ESP32 compatible with the Arduino IDE.

    74 parts258MIT
  • 2 layers50 × 50 mmCanSat Upper, the printed circuit board in 3D

    CanSat Upper

    RaTaTaTaDa/CanSat_CommsBoard

    46 parts
  • 4 layers18 × 26 mmStone, the printed circuit board in 3D

    Stone

    UCSCRocketry/stone

    43 parts
  • 4 layers23.7 × 34.2 mmSmartWatch V5, the printed circuit board in 3D

    SmartWatch V5

    Bellafaire/ESP32-Smart-Watch

    An open source smartwatch based on the ESP32 compatible with the Arduino IDE.

    59 parts258MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LP5912-3.3DRVT?

Yes. The symbol is Regulator_Linear:LP5912-3.3DRV and the footprint Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LP5912-3.3DRVT?

WSON-6-EP(2x2), with 7 pins. Its footprint is drawn on this page.

Where is the LP5912-3.3DRVT datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LP5912-3.3DRVT?

JLCPCB lists it as part C134121, with 482 in stock; the sellers' links on this page open their listings.

What can replace the LP5912-3.3DRVT?

Parts like it in the library: the TLV76733DRVR by Texas Instruments, the TLV75533PDRV by Texas Instruments, the LP5912-3.3DRVR by Texas Instruments and the TLV75733PDRV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LP5912-3.3DRVT?

4 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.