Skip to the content
12345

LP5907MFX-1.2

Texas InstrumentsExtended

-40℃~+125℃ 1 1.2V 250mA 250mV@(250mA) 25uA 5.5V 6.5uVrms 60dB@(100kHz)、90dB@(100Hz) Fixed Positive Under Voltage Lockout、Over Temperature Protection、Enable、Short Circuit Protection SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LP5907MFX-1.2
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5
Pins
5
In stock
15 at JLCPCB (C73478)
Used on
9 open-source boards

Overview

The LP5907MFX-1.2 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃ 1 1.2V 250mA 250mV@(250mA) 25uA 5.5V 6.5uVrms 60dB@(100kHz)、90dB@(100Hz) Fixed Positive Under Voltage Lockout、Over Temperature Protection、Enable、Short Circuit Protection SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:LP5907MFX-1.2, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 15 are in stock at JLCPCB (part C73478). 9 open-source boards in 8 repositories on GitHub use it.

Symbol

1IN2GND3EN5OUT
Regulator_Linear:LP5907MFX-1.2From KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Pinout

5
The pins of the LP5907MFX-1.2
PinNameType
1INPower in
2GNDPower in
3ENInput
4NCNot connected
5OUTPower out

Open-source boards using it

9See all 9
  • 6 layers69.3 × 111.8 mmFMC MIPI v2, the printed circuit board in 3D

    FMC MIPI v2

    VideoGPU/FMC_MIPI

    FMC card to allow interfacing Xilinx FPGA boards with Jetson TX2 or TX1 via CSI-2 camera interface

    143 parts22
  • 4 layers48 × 49 mmToF camera VGA, the printed circuit board in 3D

    ToF camera VGA

    lnsru/melexis_VGA_ToF_camera

    PCB design with the new MLX75027 VGA time of flight sensor

    70 parts13
  • 4 layers106 × 80 mmMainboard, the printed circuit board in 3D

    Mainboard

    PyroVision-ThermalCam/Mainboard

    Mainboard for the PyroVision thermal camera.

    152 parts11GPL-3.0
  • 6 layers50.2 × 50.7 mmAdc usb, the printed circuit board in 3D

    Adc usb

    EnPassant123/FMCW_radar_2

    FMCW radar - version 2

    305 parts2GPL-3.0
  • 4 layers89.5 × 62.6 mmPenguin, the printed circuit board in 3D

    Penguin

    jeevan9s/penguin-bot

    intelligent hybrid robot

    165 parts1
  • 4 layers60.4 × 51.4 mmWasp node board, the printed circuit board in 3D

    Wasp node board

    oskarvh/wasp

    WebAssembly Swarm Processor - a WAMR network compute distribution for MCUs

    116 parts1Apache-2.0
  • 4 layers88 × 35.8 mmNref ports one, the printed circuit board in 3D

    Nref ports one

    cetola/reform-next-mirror

    The original Open Hardware laptop, reloaded.

    153 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LP5907MFX-1.2?

Yes. The symbol is Regulator_Linear:LP5907MFX-1.2 and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LP5907MFX-1.2?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the LP5907MFX-1.2 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LP5907MFX-1.2?

JLCPCB lists it as part C73478, with 15 in stock; the sellers' links on this page open their listings.

What can replace the LP5907MFX-1.2?

Parts like it in the library: the ME6211C12M5G-N by MICRONE, the TLV74312PDBV by Texas Instruments, the MIC5504-1.2YM5-TR by Microchip Technology and the TLV75712PDBV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LP5907MFX-1.2?

9 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.