
Imp
nmatic00/max1491-4wire-ohmmeter
My first KiCAD project. 4 Wire Kelvin Ohmmeter based on MAX1491 ADC.

FMCW radar - version 2
Adc usb is an open-source printed circuit board by EnPassant123, from the EnPassant123/FMCW_radar_2 repository on GitHub, published under the GPL-3.0 licence. It is a 6-layer board of 50.2 × 50.7 mm with 305 parts on 160 nets, routed with 1,825 tracks and 354 vias.
It is built around the ICE5LP1K-SG48ITR, ADAR7251WBCSZ and MCP6291R-E/OT, with the W25Q32JVSSIQ, 74LVC1G04Z and FT232H among its other parts. Its parts include 105 capacitors, 78 resistors, 12 ICs, 12 transistors and 9 diodes. It belongs with the FPGA and CPLD boards of this library.
FMCW Radar Project
Contains design files, Verilog code for FPGA, and C code for computer.
Can be easily modified to act as a data streaming board (just disable sweep)
Code is still very buggy and does not pass timing. Use at your own risk!
Untested PCB changes: Added LDO to cut down on power supply noise (from USB) more.
The C code is based on libftdi1, and some changes need to be made to ftdi_stream.c
| Qty | Value | Footprint | References |
|---|---|---|---|
| 37 | TestPoint_Small | TestPoint:TestPoint_Pad_1.0x1.0mm | TP13, TP27, TP28, TP29, TP30, TP31, TP32, TP33, TP34, TP35, TP36, TP37, TP38, TP39, TP40, TP41 +21 |
| 31 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C12, C14, C15, C16, C17, C21, C22, C25, C26, C27, C100, C101, C102 +15 |
| 28 | 10u | Capacitor_SMD:C_0603_1608Metric | C5, C6, C10, C11, C28, C29, C34, C35, C36, C41, C47, C50, C51, C55, C56, C62 +12 |
| 20 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5, TP10, TP17, TP18, TP19, TP20, TP21, TP22, TP23, TP24, TP25, TP26 +4 |
| 13 | 2k | Resistor_SMD:R_0603_1608Metric | R9, R13, R17, R20, R22, R26, R29, R35, R39, R42, R49, R53, R56 |
| 12 | DNP | Resistor_SMD:R_0603_1608Metric | R6, R43, R63, R64, R66, R70, R71, R73, R75, R76, R77, R78 |
| 12 | MMBTH10 | Package_TO_SOT_SMD:SOT-23-3 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12 |
| 10 | 1k | Resistor_SMD:R_0603_1608Metric | R12, R19, R21, R28, R32, R34, R41, R48, R55, R65 |
| 9 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R8, R11, R33, R60 |
| 8 | 150p | Capacitor_SMD:C_0603_1608Metric | C30, C31, C37, C38, C72, C73, C87, C88 |
| 8 | 620 | Resistor_SMD:R_0603_1608Metric | R14, R18, R23, R27, R36, R40, R50, R54 |
| 8 | NLFV32T-102K-EFT | Inductor_SMD:L_1210_3225Metric | L1, L2, L3, L4, L5, L6, L7, L8 |
| 6 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C9, C43, C80, C82, C95, C104 |
| 5 | 1u | Capacitor_SMD:C_0603_1608Metric | C42, C44, C46, C103, C105 |
| 5 | Conn_Coaxial | Connector_Coaxial:SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | J4, J5, J6, J7, J8 |
| 5 | LED | LED_SMD:LED_1206_3216Metric | D1, D2, D3, D5, D8 |
| 4 | 100p | Capacitor_SMD:C_0603_1608Metric | C45, C92, C93, C94 |
| 4 | 10p | Capacitor_SMD:C_0603_1608Metric | C23, C24, C49, C52 |
| 4 | 200 | Resistor_SMD:R_0603_1608Metric | R30, R67, R69, R72 |
| 4 | 22 | Resistor_SMD:R_0603_1608Metric | R31, R57, R58, R59 |
| 4 | 39p | Capacitor_SMD:C_0603_1608Metric | C33, C40, C75, C90 |
| 4 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C13, C18, C20, C96 |
| 4 | 68 | Resistor_SMD:R_0603_1608Metric | R15, R24, R37, R51 |
| 4 | 7.5k | Resistor_SMD:R_0603_1608Metric | R16, R25, R38, R52 |
| 4 | BLM18HE152SN1D | Inductor_SMD:L_0603_1608Metric | FB1, FB2, FB3, FB4 |
| 4 | DNP | LED_SMD:LED_1206_3216Metric | D4, D6, D7, D9 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | TP11, TP12, TP14, TP54 |
| 4 | TestPoint_Small | TestPoint:TestPoint_Pad_2.0x2.0mm | TP15, TP16, TP59, TP60 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R44, R45 |
| 2 | 2.2k | Resistor_SMD:R_0603_1608Metric | R7, R61 |
| 2 | 470n | Capacitor_SMD:C_0603_1608Metric | C57, C60 |
| 2 | DNP | Capacitor_SMD:C_0603_1608Metric | C77, C79 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R74 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C19 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 15n | Capacitor_SMD:C_0603_1608Metric | C39 |
| 1 | 19.2 MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 3.6k | Resistor_SMD:R_0603_1608Metric | R47 |
| 1 | 390p | Capacitor_SMD:C_0603_1608Metric | C61 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric | R62 |
| 1 | 4.7n | Capacitor_SMD:C_0603_1608Metric | C32 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric | R68 |
| 1 | 470p | Capacitor_SMD:C_0603_1608Metric | C83 |
| 1 | 5.6n | Capacitor_SMD:C_0603_1608Metric | C63 |
| 1 | 6.2k | Resistor_SMD:R_0603_1608Metric | R46 |
| 1 | 680p | Capacitor_SMD:C_0603_1608Metric | C84 |
| 1 | 74LVC1G04 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U1 |
| 1 | 93LCxxBxxOT | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | ADAR7251WBCSZ | Package_CSP:LFCSP-48-1EP_7x7mm_P0.5mm_EP4.1x4.1mm | IC1 |
| 1 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J9 |
| 1 | Conn_01x06_Pin | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_02x03_Counter_Clockwise | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J1 |
| 1 | FT232H | Package_QFP:LQFP-48_7x7mm_P0.5mm | U5 |
| 1 | ICE5LP1K-SG48 | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U2 |
| 1 | LP5907MFX-1.2 | Package_TO_SOT_SMD:SOT-23-5 | U8 |
| 1 | LP5907MFX-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | LP5907MFX-4.5 | Package_TO_SOT_SMD:SOT-23-5 | U10 |
| 1 | MCP48FVB21-E_UN | Package_SO:MSOP-10_3x3mm_P0.5mm | IC2 |
| 1 | MCP6291R | Package_TO_SOT_SMD:SOT-23-5 | U9 |
| 1 | SW_SPDT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW2 |
| 1 | TPD2E001DRLRG4 | Package_TO_SOT_SMD:SOT-553 | U7 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10118193-0001LF_Horizontal | J3 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |

nmatic00/max1491-4wire-ohmmeter
My first KiCAD project. 4 Wire Kelvin Ohmmeter based on MAX1491 ADC.

wzwqoo/fmcw_10ghz_radar
A single-board 1TX / 3RX, 10 GHz FMCW radar, its Artix-7 range–Doppler–CFAR backend, and the carrier board that mounts the radar alongside a global-shutter camera and an impact microphone.

sandgum/Triangulate-SF_01-Speaker-Frame
A 24 inch Raspberry Pi-based Android digital picture frame attached to a 220W stereo Bluetooth speaker with DSP





dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere
It measures 50.2 × 50.7 mm and has 6 copper layers, 1.6 mm thick.
305 parts, built around the ICE5LP1K-SG48ITR, ADAR7251WBCSZ, MCP6291R-E/OT and W25Q32JVSSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the EnPassant123/FMCW_radar_2 repository on GitHub, at the commit this page was made from: the board is cad/adc_usb.kicad_pcb and its schematic cad/ADAR.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).