Skip to the content
12345

LP5907MFX-4.5

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 120mV@(250mA) 12uA 250mA 4.5V 5.5V 6.5uVrms 82dB@(1kHz) Fixed Over Temperature Protection、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LP5907MFX-4.5
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5
Pins
5
In stock
2,658 at JLCPCB (C529554)
Used on
7 open-source boards

Overview

The LP5907MFX-4.5 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(Tj) 1 120mV@(250mA) 12uA 250mA 4.5V 5.5V 6.5uVrms 82dB@(1kHz) Fixed Over Temperature Protection、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:LP5907MFX-4.5, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 2,658 are in stock at JLCPCB (part C529554). 7 open-source boards in 7 repositories on GitHub use it.

Symbol

1IN2GND3EN5OUT
Regulator_Linear:LP5907MFX-4.5From KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Pinout

5
The pins of the LP5907MFX-4.5
PinNameType
1INPower in
2GNDPower in
3ENInput
4NCNot connected
5OUTPower out

Open-source boards using it

7
  • 2 layers180 × 160 mmIidx pico, the printed circuit board in 3D

    Iidx pico

    whowechina/iidx_pico

    Pico beatmania IIDX controller

    94 parts125
  • 6 layers50.2 × 50.7 mmAdc usb, the printed circuit board in 3D

    Adc usb

    EnPassant123/FMCW_radar_2

    FMCW radar - version 2

    305 parts2GPL-3.0
  • 4 layers128 × 128 mmSF 01 Compute Board, the printed circuit board in 3D

    SF 01 Compute Board

    sandgum/Triangulate-SF_01-Speaker-Frame

    A 24 inch Raspberry Pi-based Android digital picture frame attached to a 220W stereo Bluetooth speaker with DSP

    369 parts2
  • 2 layers35.6 × 53.3 mmUNO HGA22 V1, the printed circuit board in 3D

    UNO HGA22 V1

    koszozoltan/HGA22

    HGA22 Time Signal Receiver

    63 partsMIT
  • 4 layers140 × 95 mmDual adc, the printed circuit board in 3D

    Dual adc

    devbisme/ai-circuit-design-tests

    Tests of KiCad-related AI tools.

    186 parts10
  • 2 layers68 × 32 mmScale bridge, the printed circuit board in 3D

    Scale bridge

    atuleu/aristeus

    Yet another Open Source Hardware Apiary project for monitoring bees.

    37 partsCERN-OHL-S-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LP5907MFX-4.5?

Yes. The symbol is Regulator_Linear:LP5907MFX-4.5 and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LP5907MFX-4.5?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the LP5907MFX-4.5 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LP5907MFX-4.5?

JLCPCB lists it as part C529554, with 2,658 in stock; the sellers' links on this page open their listings.

What can replace the LP5907MFX-4.5?

Parts like it in the library: the TLV70245DBV by Texas Instruments, the TPS7A2045PDBV by Texas Instruments, the ME6214C45M5G by MICRONE and the VRH4501NTX by AnaSem. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LP5907MFX-4.5?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.