

VIP direct sampling board
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 21
- Pads
- 40
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Oct 2026
- Updated
- 4 Nov 2026
Overview
VIP direct sampling board is an open-source printed circuit board by Sebastian-Pirela, from the Sebastian-Pirela/Fall-2026-VIP-Senior-Design repository on GitHub. It is a 2-layer board with 19 parts on 21 nets.
It is built around the LP5907MFX-3.0, LM66100DCK and LP5907MFX-4.5. Its parts include 6 ICs, 1 diode and 1 crystal.
Main components
3LP5907MFX-3.0
SOT-23-5-40℃~+125℃@(Tj) 1 120mV@(250mA) 12uA 250mA 3V 5.5V 6.5uVrms 82dB@(1kHz) Fixed Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLM66100DCK
SC-70-6-40℃~+125℃ 1 1.5A 1.5V~5.5V 150nA 95mΩ Integrated FET Reverse current blocking、Reverse polarity protection、With enable SC-70-6 ORing Controllers ROHSTexas InstrumentsPower Distribution SwitchesLP5907MFX-4.5
SOT-23-5-40℃~+125℃@(Tj) 1 120mV@(250mA) 12uA 250mA 4.5V 5.5V 6.5uVrms 82dB@(1kHz) Fixed Over Temperature Protection、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | LP5907MFX-3.0 | Package_TO_SOT_SMD:SOT-23-5 | U15, U17, U20 |
| 1 | B3715 | Filter:Filter_SAW_Epcos_DCC6C_3x3mm | X1 |
| 1 | DC4759J5020AHF-1 | RF_Converter:Anaren_0805_2012Metric-6 | U11 |
| 1 | GC6002-350A | Diode_SMD:D_SOD-523 | D1 |
| 1 | LM66100DCK | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U16 |
| 1 | LP5907MFX-4.5 | Package_TO_SOT_SMD:SOT-23-5 | U19 |
The 8 most common of 19 parts.
More from Sebastian-Pirela/Fall-2026-VIP-Senior-Design
1- 2 layers

Similar boards
- 4 layers140 × 95 mm

- 2 layers180 × 160 mm

- 6 layers50.2 × 50.7 mm

- 4 layers128 × 128 mm

SF 01 Compute Board
sandgum/Triangulate-SF_01-Speaker-Frame
A 24 inch Raspberry Pi-based Android digital picture frame attached to a 220W stereo Bluetooth speaker with DSP
369 parts2 - 2 layers35.6 × 53.3 mm

- 2 layers68 × 32 mm

Scale bridge
atuleu/aristeus
Yet another Open Source Hardware Apiary project for monitoring bees.
37 partsCERN-OHL-S-2.0 - 4 layers94.6 × 83.4 mm

Fmcw nightly
matthuszagh/fmcw
6GHz frequency-modulated continuous-wave radar with real-time range detection
446 parts66Apache-2.0 - 4 layers106 × 80 mm

Mainboard
PyroVision-ThermalCam/Mainboard
Mainboard for the PyroVision thermal camera.
152 parts11GPL-3.0
Questions
What parts does the VIP direct sampling board use?
19 parts, built around the LP5907MFX-3.0, LM66100DCK and LP5907MFX-4.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VIP direct sampling board KiCad files?
From the Sebastian-Pirela/Fall-2026-VIP-Senior-Design repository on GitHub, at the commit this page was made from: the board is VIP_direct_sampling_board.kicad_pcb and its schematic New_Versions/VIP_direct_sampling_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the VIP direct sampling board design in my own project?
Its repository states no licence, so its author keeps all rights: ask Sebastian-Pirela before reusing the design.