2 layers
2 layers
VIP direct sampling board
Sebastian-Pirela/Fall-2026-VIP-Senior-Design- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 66
- Pads
- 135
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Oct 2026
- Updated
- 4 Nov 2026
Overview
VIP direct sampling board is an open-source printed circuit board by Sebastian-Pirela, from the Sebastian-Pirela/Fall-2026-VIP-Senior-Design repository on GitHub. It is a 2-layer board with 20 parts on 66 nets.
It is built around the PSA-8A+, RBP-140+ and LP5907MFX-3.0/NOPB, with the TSS-23ULN+, ADC-20-4 and TMUX1104DGSR among its other parts. Its parts include 14 ICs, 3 resistors and 3 connectors.
Main components
11
PSA-8A+
SC-70-6-40℃~+85℃ 0Hz~4GHz 11.2dB 12.8dBm 18dB 20dB 26.1dBm 36mA 4.75V~5.25V 4.8dB SC-70-6 RF Amplifiers ROHSMini-CircuitsRF Amplifiers
RBP-140+
SMD-8P,8.9x8.9mm-40℃~+85℃ 130MHz~150MHz 140MHz 2.6dB 40dB 50Ω Bandpass SMD-8P,8.9x8.9mm RF Filters ROHSMini-CircuitsRF Filters
LP5907MFX-3.0/NOPB
UncategorisedUnknown makerTSS-23ULN+
-- HWDG ROHSMini-CircuitsUncategorised
ADC-20-4
CD54250 Ohms, 5 To 100MHz, Directional CouplerMini-CircuitsUncategorised
TMUX1104DGSR
VSSOP-10-40℃~+125℃ 1.08V~5.5V 1.5pC 12ns 155MHz 2Ω 35pF 4 4:1 5ns Bidirectional analog channel、Fault protection VSSOP-10 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
TPS22810TDBVRQ1
SOT-23-6-40℃~+105℃ 1 2.7V~18V 2A 79mΩ Active High Load Switch Undervoltage Protection(UVP)、Over Temperature Protection SOT-23-6 Power Distribution Switches ROHSTexas InstrumentsPower Distribution SwitchesTPS22918TDBVRQ1
SOT-23-6-40℃~+105℃ 1 1V~5.5V 2A 52mΩ Active High Load Switch Output discharge function、Soft-start SOT-23-6 Power Distribution Switches ROHSTexas InstrumentsPower Distribution Switches
FC0402E50R0BST1
0402-55℃~+155℃ 30V 50mW 50Ω Thin Film Resistor ±0.1% ±25ppm/℃ 0402 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface Mount380-015-213L001
-15P 2 Panel Mount - New Arrivals ROHSNorCompD-Sub / VGA Connectors
CONMHF1-SMD-G-T
SMD-40℃~+90℃ 1 50Ω 60V 6GHz Board Side Male Pin SMD Coaxial Connectors (RF) ROHSTE ConnectivityCoaxial Connectors (RF)
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | FC0402E50R0BST1 | VIP_Footprint_Library_RF_Card_PCB:ul_FC0402E50R0BST1 | R10, R12, R13 |
| 3 | LP5907MFX-3.0/NOPB | VIP_Footprint_Library_RF_Card_PCB:ul_LP5907MFX-3-0-NOPB | U3, U4, U20 |
| 2 | PSA-8A+ | VIP_Footprint_Library_RF_Card_PCB:ul_PSA-8A- | U1, U24 |
| 2 | TSS-23ULN+ | VIP_Footprint_Library_RF_Card_PCB:ul_TSS-23ULN- (1) | U5, U9 |
| 1 | 142-0701-201 | VIP_Footprint_Library_RF_Card_PCB:ul_142-0701-201 | J2 |
| 1 | 380-015-213L001 | VIP_Footprint_Library_RF_Card_PCB:380-015-213L001 | J3 |
| 1 | ADC-20-4_ | VIP_Footprint_Library_RF_Card_PCB:ADC-20-4_ | U15 |
| 1 | ADS7830IPWR | VIP_Footprint_Library_RF_Card_PCB:ul_ADS7830IPWR | U16 |
| 1 | CONMHF1-SMD-G-T | VIP_Footprint_Library_RF_Card_PCB:ul_CONMHF1-SMD-G-T | J8 |
| 1 | LM66100DCKR | VIP_Footprint_Library_RF_Card_PCB:ul_LM66100DCKR | U7 |
| 1 | RBP-140+ | VIP_Footprint_Library_RF_Card_PCB:ul_RBP-140- (1) | U25 |
| 1 | TMUX1104DGSR | VIP_Footprint_Library_RF_Card_PCB:ul_TMUX1104DGSR (1) | U26 |
| 1 | TPS22810TDBVRQ1 | VIP_Footprint_Library_RF_Card_PCB:ul_TPS22810TDBVRQ1 | U27 |
| 1 | TPS22918TDBVRQ1 | VIP_Footprint_Library_RF_Card_PCB:ul_TPS22918TDBVRQ1 | U2 |
More from Sebastian-Pirela/Fall-2026-VIP-Senior-Design
1Similar boards
- 2 layers22.1 × 39.1 mm
- 2 layers22.1 × 39.1 mm
- 2 layers41.9 × 12.7 mm
- 2 layers20 × 24 mm
RBP-140+
M0LTE/pi-transceiver
An attempt to build a complete ham radio transceiver around a Raspberry Pi
7 parts15 - 2 layers
T41-Main+RF board V012
DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
255 parts66 - 4 layers198.4 × 104.3 mm
DC33
Maritime-Hacking-Village/Badge-2025
Public repository for the official MHV 2025 badge.
200 parts15CERN-OHL-W-2.0 - 4 layers100 × 100 mm
- 4 layers64.8 × 18 mm
Corncob
aswild/corncob
Corncob is an adapter to run standard 12V PWM computer fans off of a USB power source. It boosts 5V or 9V USB-PD power to 12V and outputs a PWM control signal.
51 parts
Questions
What parts does the VIP direct sampling board use?
20 parts, built around the PSA-8A+, RBP-140+, LP5907MFX-3.0/NOPB and TSS-23ULN+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VIP direct sampling board KiCad files?
From the Sebastian-Pirela/Fall-2026-VIP-Senior-Design repository on GitHub, at the commit this page was made from: the board is New_Versions/VIP_direct_sampling_board.kicad_pcb and its schematic New_Versions/VIP_direct_sampling_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the VIP direct sampling board design in my own project?
Its repository states no licence, so its author keeps all rights: ask Sebastian-Pirela before reusing the design.