

ToF camera VGA
PCB design with the new MLX75027 VGA time of flight sensor
- Size
- 48 × 49 mm
- Copper layers
- 4
- Thickness
- 0.8 mm
- Parts
- 70
- Nets
- 52
- Pads
- 473
- Tracks, vias
- 1,548, 151
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Aug 2019
- Updated
- 8 Dec 2021
Overview
ToF camera VGA is an open-source printed circuit board by lnsru, from the lnsru/melexis_VGA_ToF_camera repository on GitHub. It is a 4-layer board of 48 × 49 mm with 70 parts on 52 nets, routed with 1,548 tracks and 151 vias.
It is built around the TPS82130SIL, LP5907MFX-1.2 and LP5907MFX-1.8, with the LP5907MFX-2.8, MLX75027 and PCA9306D among its other parts. Its parts include 30 capacitors, 17 connectors, 6 resistors, 6 ICs and 1 diode.
Main components
6TPS82130SIL
3V to 17V Input 3A Step-Down Converter MicroSiP™ Module with Integrated InductorTexas InstrumentsUncategorisedLP5907MFX-1.2
SOT-23-5-40℃~+125℃ 1 1.2V 250mA 250mV@(250mA) 25uA 5.5V 6.5uVrms 60dB@(100kHz)、90dB@(100Hz) Fixed Positive Under Voltage Lockout、Over Temperature Protection、Enable、Short Circuit Protection SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLP5907MFX-1.8
SOT-23-5-40℃~+125℃@(Tj) 1 1.8V 120mV@(250mA) 12uA 250mA 5.5V 6.5uVrms 82dB@(1kHz) Fixed Positive Under Voltage Lockout、Over Temperature Protection、Enable、Short Circuit Protection SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLP5907MFX-2.8
SOT-23-5-40℃~+125℃@(Tj) 1 120mV@(250mA) 12uA 2.8V 250mA 5.5V 6.5uVrms 82dB@(1kHz) Fixed Positive Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Output discharge SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMLX75027
BGA-144_14X14BGA-144_14X14 New Arrivals ROHSMelexisUncategorisedPCA9306D
SO-8-40℃~+105℃ 1 1.8V~5.5V 1V~3.6V 2 2Mbps Automatic direction detection、Output enable high-impedance Bidirectional Level translator Open-drain SMBus、I2C SO-8 Translators, Level Shifters ROHSNXP SemiconductorsTranslators, Level Shifters
README
README.mdmelexis_VGA_ToF_camera
PCB design with the new MLX75027 VGA time of flight sensor
For test pattern acquisition it can be used with Raspberry Pi, for real operation it needs external power supply.

Parts
70| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_0805_2012Metric | C11, C12, C20, C22, C23, C25, C26, C32, C33 |
| 8 | 10u | Capacitor_SMD:C_0805_2012Metric | C8, C9, C13, C18, C19, C21, C29, C31 |
| 8 | 1u | Capacitor_SMD:C_0805_2012Metric | C1, C3, C5, C14, C15, C16, C17, C28 |
| 4 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C2, C4, C6, C7 |
| 4 | Conn_01x01 | TestPoint:TestPoint_Pad_2.0x2.0mm | J10, J12, J14, J16 |
| 4 | Mounting_Hole_PAD | MountingHole:MountingHole_3.2mm_M3 | MK1, MK2, MK3, MK4 |
| 3 | Conn_01x01 | TestPoint:TestPoint_Pad_1.0x1.0mm | J11, J13, J15 |
| 2 | 1k5 | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | Conn_01x01 | TestPoint:TestPoint_Pad_4.0x4.0mm | J17, J18 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J5, J6 |
| 2 | MountingHole | myFootprints:MountingHole_1.5mm | H1, H2 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R17 |
| 1 | 200k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 430p | Capacitor_SMD:C_0805_2012Metric | C10 |
| 1 | 49.9k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 503480-2200 | myFootprints:Molex-503480-2200 | J8 |
| 1 | 68u | Capacitor_Tantalum_SMD:CP_EIA-7343-30_AVX-N | CP27 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | Conn_01x01 | TestPoint:TestPoint_Pad_D1.5mm | J4 |
| 1 | Conn_01x02 | Resistor_SMD:R_0603_1608Metric | J7 |
| 1 | Conn_01x03 | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm | J9 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | DSC6011JI1A-008.0000_clock_source | myFootprints:DSC6011JI1A0080000_clock_source | Y1 |
| 1 | L | Inductor_SMD:L_1210_3225Metric | L1 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D1 |
| 1 | LP5907MFX-1.2 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | LP5907MFX-1.8 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | LP5907MFX-2.8 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | MLX75027 | myFootprints:MLX75027_NSMD | U2 |
| 1 | PCA9306 | Package_SO:SSOP-8_2.95x2.8mm_P0.65mm | U5 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_EVPBF | SW1 |
| 1 | TPS82130 | Package_LGA:Texas_SIL0008D_MicroSiP-8-1EP_2.8x3mm_P0.65mm_EP1.1x1.9mm_ThermalVias | U6 |
Similar boards
- 4 layers127 × 127 mm

- 4 layers106 × 80 mm

Mainboard
PyroVision-ThermalCam/Mainboard
Mainboard for the PyroVision thermal camera.
152 parts11GPL-3.0 - 4 layers89.5 × 62.6 mm

- 6 layers69.3 × 111.8 mm

FMC MIPI v2
VideoGPU/FMC_MIPI
FMC card to allow interfacing Xilinx FPGA boards with Jetson TX2 or TX1 via CSI-2 camera interface
143 parts22 - 6 layers50.2 × 50.7 mm

- 4 layers60.4 × 51.4 mm

Wasp node board
oskarvh/wasp
WebAssembly Swarm Processor - a WAMR network compute distribution for MCUs
116 parts1Apache-2.0 - 4 layers100 × 100 mm

- 4 layers88 × 35.8 mm

Questions
How big is the ToF camera VGA PCB?
It measures 48 × 49 mm and has 4 copper layers, 0.8 mm thick.
What parts does the ToF camera VGA use?
70 parts, built around the TPS82130SIL, LP5907MFX-1.2, LP5907MFX-1.8 and LP5907MFX-2.8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ToF camera VGA KiCad files?
From the lnsru/melexis_VGA_ToF_camera repository on GitHub, at the commit this page was made from: the board is ToF_camera_VGA.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ToF camera VGA design in my own project?
Its repository states no licence, so its author keeps all rights: ask lnsru before reusing the design.