
Eigentime32
captainchapster/Eigentime32
A self-contained pocket watch that keeps its own time for a decade. No GPS, one coin cell, one PCB.
STMicroelectronicsExtended
-40℃~+85℃ 1.8V~3.6V 12bit 1KB 21 32 Bit 32KB 32MHz 8KB ARM Cortex-M0+ Built-in FLASH UFQFPN-28(4x4) Microcontrollers (MCU/MPU/SOC) ROHS
The STM32L031G6U6 is a microcontroller made by STMicroelectronics in a UFQFPN-28(4x4) package with 28 pins. -40℃~+85℃ 1.8V~3.6V 12bit 1KB 21 32 Bit 32KB 32MHz 8KB ARM Cortex-M0+ Built-in FLASH UFQFPN-28(4x4) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32L0:STM32L031G6Ux, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-28_4x4mm_P0.5mm, from KiCad's library), ready for a KiCad board. 6,373 are in stock at JLCPCB (part C883300). 7 open-source boards in 6 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| External main supply voltage (including VDDA, VDD) VDD–VSS | min -0.3 · max 4 V | 50 | |
| Input voltage on TC pins VIN | max 4 V | 50 | |
| Input voltage on any other pin VIN | max 4 V | 50 | |
| Variations between different VDDx power pins |ΔVDD| | max 50 mV | 50 | |
| Variations between any VDDx and VDDA power pins |VDDA-VDDx| | max 300 mV | 50 | |
| Variations between all different ground pins |ΔVSS| | max 50 mV | 50 | |
| Total current into sum of all VDD power lines (source) ΣIVDD | max 105 mA | 51 | |
| Total current out of sum of all VSS ground lines (sink) ΣIVSS | max 105 mA | 51 | |
| Maximum current into each VDD power pin (source) IVDD(PIN) | max 100 mA | 51 | |
| Maximum current out of each VSS ground pin (sink) IVSS(PIN) | max 100 mA | 51 | |
| Output current sunk by any I/O and control pin except FTf pins IIO | max 16 mA | 51 | |
| Output current sunk by FTf pins IIO | max 22 mA | 51 | |
| Output current sourced by any I/O and control pin IIO | max -16 mA | 51 | |
| Total output current sunk by sum of all IOs and control pins ΣIIO(PIN) | All part numbers except for STM32L031GxUxS | max 90 mA | 51 |
| Total output current sourced by sum of all IOs and control pins ΣIIO(PIN) | All part numbers except for STM32L031GxUxS | max -90 mA | 51 |
| Injected current on FT, FFf, RST and B pins IINJ(PIN) | min -5 · max 0 mA | 51 | |
| Injected current on TC pin IINJ(PIN) | min -5 · max 5 mA | 51 | |
| Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) | min -25 · max 25 mA | 51 | |
| Storage temperature range TSTG | min -65 · max 150 °C | 51 | |
| Maximum junction temperature TJ | max 150 °C | 51 | |
| Internal AHB clock frequency fHCLK | min 0 · max 32 MHz | 52 | |
| Internal APB1 clock frequency fPCLK1 | min 0 · max 32 MHz | 52 | |
| Internal APB2 clock frequency fPCLK2 | min 0 · max 32 MHz | 52 | |
| Standard operating voltage VDD | BOR detector disabled | min 1.65 · max 3.6 V | 52 |
| Standard operating voltage VDD | BOR detector enabled, at power on | min 1.8 · max 3.6 V | 52 |
| Standard operating voltage VDD | BOR detector disabled, after power on | min 1.65 · max 3.6 V | 52 |
| Analog operating voltage (all features) VDDA | Must be the same voltage as VDD | min 1.65 · max 3.6 V | 52 |
| Input voltage on FT, FTf and RST pins VIN | 2.0 V ≤ VDD ≤ 3.6 V | min -0.3 · max 5.5 V | 52 |
| Input voltage on FT, FTf and RST pins VIN | 1.65 V ≤ VDD ≤ 2.0 V | min -0.3 · max 5.2 V | 52 |
| Input voltage on BOOT0 pin VIN | min 0 · max 5.5 V | 52 | |
| Input voltage on TC pin VIN | min -0.3 V | 52 | |
| Power dissipation at TA = 85 °C (range 6) or TA =105 °C (rage 7) PD | UFQFPN28 package | max 167 mW | 52 |
| Power dissipation at TA = 125 °C (range 3) PD | UFQFPN28 package | max 42 mW | 52 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | HSE bypassed, fHSE = fHCLK; Range 3, VCORE = 1.2 V, VOS[1:0] = 11; fHCLK = 1 MHz | typ 140 · max 200 uA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | HSE bypassed, fHSE = fHCLK; Range 3, VCORE = 1.2 V, VOS[1:0] = 11; fHCLK = 2 MHz | typ 245 · max 310 uA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | HSE bypassed, fHSE = fHCLK; Range 3, VCORE = 1.2 V, VOS[1:0] = 11; fHCLK = 4 MHz | typ 460 · max 540 uA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | HSE bypassed, fHSE = fHCLK; Range 2, VCORE = 1.5 V, VOS[1:0] = 10; fHCLK = 4 MHz | typ 0.56 · max 0.63 mA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | HSE bypassed, fHSE = fHCLK; Range 2, VCORE = 1.5 V, VOS[1:0] = 10; fHCLK = 8 MHz | typ 1.1 · max 1.2 mA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | HSE bypassed, fHSE = fHCLK; Range 2, VCORE = 1.5 V, VOS[1:0] = 10; fHCLK = 16 MHz | typ 2.1 · max 2.3 mA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | HSE bypassed, fHSE = fHCLK; Range 1, VCORE = 1.8 V, VOS[1:0] = 01; fHCLK = 8 MHz | typ 1.25 · max 1.4 mA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | HSE bypassed, fHSE = fHCLK/2, PLL on; Range 1, VCORE = 1.8 V, VOS[1:0] = 01; fHCLK = 32 MHz | typ 5 · max 5.6 mA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | HSI clock; Range 2, VCORE = 1.5 V, VOS[1:0] = 10; fHCLK = 16 MHz | typ 2.1 · max 2.4 mA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | HSI clock; Range 1, VCORE = 1.8 V, VOS[1:0] = 01; fHCLK = 32 MHz | typ 5.1 · max 5.7 mA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | MSI clock; Range 3, VCORE = 1.2 V, VOS[1:0] = 11; fHCLK = 65 kHz | typ 34.5 · max 110 uA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | MSI clock; Range 3, VCORE = 1.2 V, VOS[1:0] = 11; fHCLK = 524 kHz | typ 86 · max 150 uA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | MSI clock; Range 3, VCORE = 1.2 V, VOS[1:0] = 11; fHCLK = 4.2 MHz | typ 505 · max 570 uA | 57 |
| Supply current in Run mode, code executed from Flash memory IDD (Run from Flash) | HSE bypassed, fHSE = fHCLK; Range 3, VCORE = 1.2 V, VOS[1:0] = 11; 4 MHz; Dhrystone | typ 460 uA | 57 |
| Supply current in Run mode, code executed from Flash memory IDD (Run from Flash) | HSE bypassed, fHSE = fHCLK; Range 3, VCORE = 1.2 V, VOS[1:0] = 11; 4 MHz; CoreMark | typ 455 uA | 57 |
| Supply current in Run mode, code executed from Flash memory IDD (Run from Flash) | HSE bypassed, fHSE = fHCLK; Range 3, VCORE = 1.2 V, VOS[1:0] = 11; 4 MHz; Fibonacci | typ 330 uA | 57 |
| Supply current in Run mode, code executed from Flash memory IDD (Run from Flash) | HSE bypassed, fHSE = fHCLK; Range 3, VCORE = 1.2 V, VOS[1:0] = 11; 4 MHz; while(1) | typ 305 uA | 57 |
| Supply current in Run mode, code executed from Flash memory IDD (Run from Flash) | HSE bypassed, fHSE = fHCLK; Range 3, VCORE = 1.2 V, VOS[1:0] = 11; 4 MHz; while(1), prefetch OFF | typ 320 uA | 57 |
| Supply current in Run mode, code executed from Flash memory IDD (Run from Flash) | HSE bypassed, fHSE = fHCLK/2, PLL on; Range 1, VCORE = 1.8 V, VOS[1:0] = 01; 32 MHz; Dhrystone | typ 5 mA | 57 |
| Supply current in Run mode, code executed from Flash memory IDD (Run from Flash) | HSE bypassed, fHSE = fHCLK/2, PLL on; Range 1, VCORE = 1.8 V, VOS[1:0] = 01; 32 MHz; CoreMark | typ 5.15 mA | 57 |
| Supply current in Run mode, code executed from Flash memory IDD (Run from Flash) | HSE bypassed, fHSE = fHCLK/2, PLL on; Range 1, VCORE = 1.8 V, VOS[1:0] = 01; 32 MHz; while(1) | typ 4.35 mA | 57 |
| Supply current in Run mode, code executed from Flash memory IDD (Run from Flash) | HSE bypassed, fHSE = fHCLK/2, PLL on; Range 1, VCORE = 1.8 V, VOS[1:0] = 01; 32 MHz; while(1), prefetch OFF | typ 3.85 mA | 57 |
| Supply current in Stop mode IDD (Stop) | TA = -40°C to 25°C | typ 0.38 · max 0.99 uA | 63 |
| Supply current in Stop mode IDD (Stop) | TA = 55°C | typ 0.54 · max 1.9 uA | 63 |
| Supply current in Stop mode IDD (Stop) | TA= 85°C | typ 1.35 · max 4.2 uA | 63 |
| Supply current in Stop mode IDD (Stop) | TA = 105°C | typ 3.1 · max 9 uA | 63 |
| Supply current in Stop mode IDD (Stop) | TA = 125°C | typ 7.55 · max 19 uA | 63 |
| Supply current in Standby mode IDD (Standby) | Independent watchdog and LSI enabled; TA = -40 °C to 25 °C | typ 0.8 · max 1.6 uA | 64 |
| Supply current in Standby mode IDD (Standby) | Independent watchdog and LSI enabled; TA = 55 °C | typ 0.9 · max 1.8 uA | 64 |
| Supply current in Standby mode IDD (Standby) | Independent watchdog and LSI enabled; TA= 85 °C | typ 1 · max 2 uA | 64 |
| Supply current in Standby mode IDD (Standby) | Independent watchdog and LSI enabled; TA = 105 °C | typ 1.3 · max 3 uA | 64 |
| Supply current in Standby mode IDD (Standby) | Independent watchdog and LSI enabled; TA = 125 °C | typ 2.15 · max 7 uA | 64 |
| Supply current in Standby mode IDD (Standby) | Independent watchdog and LSI off; TA = -40 °C to 25 °C | typ 0.255 · max 0.6 uA | 64 |
| Supply current in Standby mode IDD (Standby) | Independent watchdog and LSI off; TA = 55 °C | typ 0.28 · max 0.7 uA | 64 |
| Supply current in Standby mode IDD (Standby) | Independent watchdog and LSI off; TA = 85 °C | typ 0.405 · max 1 uA | 64 |
| Supply current in Standby mode IDD (Standby) | Independent watchdog and LSI off; TA = 105 °C | typ 0.7 · max 1.7 uA | 64 |
| Supply current in Standby mode IDD (Standby) | Independent watchdog and LSI off; TA = 125 °C | typ 1.55 · max 5 uA | 64 |
| Supply current during wakeup from Stop mode IDD (WU from Stop) | HSI | typ 1 mA | 64 |
| Supply current during wakeup from Stop mode IDD (WU from Stop) | HSI/4 | typ 0.7 mA | 64 |
| Supply current during wakeup from Stop mode IDD (WU from Stop) | MSI 4,2 MHz | typ 0.7 mA | 64 |
| Supply current during wakeup from Stop mode IDD (WU from Stop) | MSI 1,05 MHz | typ 0.4 mA | 64 |
| Supply current during wakeup from Stop mode IDD (WU from Stop) | MSI 65 KHz | typ 0.1 mA | 64 |
| Reset pin pulled down IDD (Reset) | typ 0.21 mA | 64 | |
| BOR on IDD (Power Up) | typ 0.23 mA | 64 | |
| With Fast wakeup set IDD (WU from StandBy) | MSI 2,1 MHz | typ 0.5 mA | 64 |
| With Fast wakeup disabled IDD (WU from StandBy) | MSI 2,1 MHz | typ 0.12 mA | 64 |
| I/O Schmitt trigger voltage hysteresis Vhys | BOOT0 pin | typ 0.01 V | 80 |
| Input leakage current Ilkg | VDD≤VIN ≤5 V; All I/Os except for PA11, PA12, BOOT0 and FTf I/Os | max 200 nA | 80 |
| Input leakage current Ilkg | VDD≤VIN ≤5 V; FTf I/Os | max 500 nA | 80 |
| Input leakage current Ilkg | VDD≤VIN ≤5 V; PA11, PA12 and BOOT0 | max 10 uA | 80 |
| Weak pull-up equivalent resistor RPU | VIN = VSS | min 25 · typ 45 · max 65 kΩ | 80 |
| Weak pull-down equivalent resistor RPD | VIN = VDD | min 25 · typ 45 · max 65 kΩ | 80 |
| I/O pin capacitance CIO | typ 5 pF | 80 | |
| Maximum frequency fmax(IO)out | OSPEEDRx[1:0] = 00; CL = 50 pF, VDD = 2.7 V to 3.6 V | max 400 kHz | 83 |
| Maximum frequency fmax(IO)out | OSPEEDRx[1:0] = 00; CL = 50 pF, VDD = 1.65 V to 2.7 V | max 100 kHz | 83 |
| Output rise and fall time tf(IO)out, tr(IO)out | OSPEEDRx[1:0] = 00; CL = 50 pF, VDD = 2.7 V to 3.6 V | max 125 ns | 83 |
| Output rise and fall time tf(IO)out, tr(IO)out | OSPEEDRx[1:0] = 00; CL = 50 pF, VDD = 1.65 V to 2.7 V | max 320 ns | 83 |
| Maximum frequency fmax(IO)out | OSPEEDRx[1:0] = 01; CL = 50 pF, VDD = 2.7 V to 3.6 V | max 2 MHz | 83 |
| Maximum frequency fmax(IO)out | OSPEEDRx[1:0] = 01; CL = 50 pF, VDD = 1.65 V to 2.7 V | max 0.6 MHz | 83 |
| Output rise and fall time tf(IO)out, tr(IO)out | OSPEEDRx[1:0] = 01; CL = 50 pF, VDD = 2.7 V to 3.6 V | max 30 ns | 83 |
| Output rise and fall time tf(IO)out, tr(IO)out | OSPEEDRx[1:0] = 01; CL = 50 pF, VDD = 1.65 V to 2.7 V | max 65 ns | 83 |
| Maximum frequency Fmax(IO)out | OSPEEDRx[1:0] = 10; CL = 50 pF, VDD = 2.7 V to 3.6 V | max 10 MHz | 83 |
| Maximum frequency Fmax(IO)out | OSPEEDRx[1:0] = 10; CL = 50 pF, VDD = 1.65 V to 2.7 V | max 2 MHz | 83 |
| Output rise and fall time tf(IO)out, tr(IO)out | OSPEEDRx[1:0] = 10; CL = 50 pF, VDD = 2.7 V to 3.6 V | max 13 ns | 83 |
| Output rise and fall time tf(IO)out, tr(IO)out | OSPEEDRx[1:0] = 10; CL = 50 pF, VDD = 1.65 V to 2.7 V | max 28 ns | 83 |
| Maximum frequency Fmax(IO)out | OSPEEDRx[1:0] = 11; CL = 30 pF, VDD = 2.7 V to 3.6 V | max 35 MHz | 83 |
| Maximum frequency Fmax(IO)out | OSPEEDRx[1:0] = 11; CL = 50 pF, VDD = 1.65 V to 2.7 V | max 10 MHz | 83 |
| Output rise and fall time tf(IO)out, tr(IO)out | OSPEEDRx[1:0] = 11; CL = 30 pF, VDD = 2.7 V to 3.6 V | max 6 ns | 83 |
| Output rise and fall time tf(IO)out, tr(IO)out | OSPEEDRx[1:0] = 11; CL = 50 pF, VDD = 1.65 V to 2.7 V | max 17 ns | 83 |
| Maximum frequency fmax(IO)out | Fm+ configuration; CL = 50 pF, VDD = 2.5 V to 3.6 V | max 1 MHz | 83 |
| Output fall time tf(IO)out | Fm+ configuration; CL = 50 pF, VDD = 2.5 V to 3.6 V | max 10 ns | 83 |
| Output rise time tr(IO)out | Fm+ configuration; CL = 50 pF, VDD = 2.5 V to 3.6 V | max 30 ns | 83 |
| Maximum frequency fmax(IO)out | Fm+ configuration; CL = 50 pF, VDD = 1.65 V to 3.6 V | max 350 KHz | 83 |
| Output fall time tf(IO)out | Fm+ configuration; CL = 50 pF, VDD = 1.65 V to 3.6 V | max 15 ns | 83 |
| Output rise time tr(IO)out | Fm+ configuration; CL = 50 pF, VDD = 1.65 V to 3.6 V | max 60 ns | 83 |
| Pulse width of external signals detected by the EXTI controller tEXTIpw | min 8 ns | 83 | |
| Thermal resistance junction-ambient ΘJA | UFQFPN28 - 4 x 4 mm / 0.5 mm pitch | typ 120 °C/W | 118 |
| Total output current sunk by sum of all IOs and control pins ΣIIO(PIN) | All part numbers except STM32L031GxUxS | max 90 mA | 51 |
| Total output current sourced by sum of all IOs and control pins ΣIIO(PIN) | All part numbers except STM32L031GxUxS | max -90 mA | 51 |
| Injected current on TC pin IINJ(PIN) | Maximum rating ±5 mA | max 5 mA | 51 |
| Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) | Maximum rating ±25 mA; sum of absolute injected currents | max 25 mA | 51 |
| Temperature range TA | Maximum power dissipation (range 6) | min -40 · max 85 °C | 53 |
| Junction temperature range (range 6) TJ | -40 °C ≤ TA ≤ 85 °C | min -40 · max 105 °C | 53 |
| VDD rise time rate tVDD | BOR detector enabled; maximum ∞ | min 0 us/V | 53 |
| VDD rise time rate tVDD | BOR detector disabled | min 0 · max 1000 us/V | 53 |
| VDD fall time rate tVDD | BOR detector enabled; maximum ∞ | min 20 us/V | 53 |
| VDD fall time rate tVDD | BOR detector disabled | min 0 · max 1000 us/V | 53 |
| Reset temporization TRSTTEMPO | VDD rising, BOR enabled | typ 2 · max 3.3 ms | 53 |
| Reset temporization TRSTTEMPO | VDD rising, BOR disabled | min 0.4 · typ 0.7 · max 1.6 ms | 53 |
| Power on/power down reset threshold VPOR/PDR | Falling edge | min 1 · typ 1.5 · max 1.65 V | 53 |
| Power on/power down reset threshold VPOR/PDR | Rising edge | min 1.3 · typ 1.5 · max 1.65 V | 53 |
| Brown-out reset threshold 0 VBOR0 | Falling edge | min 1.67 · typ 1.7 · max 1.74 V | 53 |
| Brown-out reset threshold 0 VBOR0 | Rising edge | min 1.69 · typ 1.76 · max 1.8 V | 53 |
| Brown-out reset threshold 1 VBOR1 | Falling edge | min 1.87 · typ 1.93 · max 1.97 V | 53 |
| Brown-out reset threshold 1 VBOR1 | Rising edge | min 1.96 · typ 2.03 · max 2.07 V | 53 |
| Brown-out reset threshold 2 VBOR2 | Falling edge | min 2.22 · typ 2.3 · max 2.35 V | 53 |
| Brown-out reset threshold 2 VBOR2 | Rising edge | min 2.31 · typ 2.41 · max 2.44 V | 53 |
| Internal reference voltage VREFINT out | –40 °C < TJ < +125 °C | min 1.202 · typ 1.224 · max 1.242 V | 55 |
| Internal reference startup time TVREFINT | typ 2 · max 3 ms | 55 | |
| VDDA voltage during VREFINT factory measure VVREF_MEAS | min 2.99 · typ 3 · max 3.01 V | 55 | |
| Accuracy of factory-measured VREFINT value AVREF_MEAS | Including uncertainties due to ADC and VDDA values; maximum ±5 mV | max 5 mV | 55 |
| Temperature coefficient TCoeff | –40 °C < TJ < +125 °C | typ 25 · max 100 ppm/°C | 55 |
| Long-term stability ACoeff | 1000 hours, T = 25 °C | max 1000 ppm | 55 |
| Voltage coefficient VDDCoeff | 3.0 V < VDDA < 3.6 V | max 2000 ppm/V | 55 |
| ADC sampling time when reading the internal reference voltage TS_vrefint | min 5 · typ 10 us | 55 | |
| Startup time of reference voltage buffer for ADC TADC_BUF | max 10 us | 55 | |
| Consumption of reference voltage buffer for ADC IBUF_ADC | typ 13.5 · max 25 uA | 55 | |
| VREF_OUT output current IVREF_OUT | Less than 1% VREF_OUT deviation | max 1 uA | 55 |
| VREF_OUT output load CVREF_OUT | max 50 pF | 55 | |
| Consumption of reference voltage buffer for VREF_OUT and COMP ILPBUF | typ 730 · max 1200 nA | 55 | |
| 1/4 reference voltage VREFINT_DIV1 | min 24 · typ 25 · max 26 % VREFINT | 55 | |
| 1/2 reference voltage VREFINT_DIV2 | min 49 · typ 50 · max 51 % VREFINT | 55 | |
| 3/4 reference voltage VREFINT_DIV3 | min 74 · typ 75 · max 76 % VREFINT | 55 | |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | HSE bypass; 1 MHz; range 3, VCORE = 1.2 V, VOS = 11 | typ 140 · max 200 uA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | HSE bypass; 2 MHz; range 3, VCORE = 1.2 V, VOS = 11 | typ 245 · max 310 uA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | HSE bypass; 4 MHz; range 3, VCORE = 1.2 V, VOS = 11 | typ 460 · max 540 uA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | HSE bypass; 4 MHz; range 2, VCORE = 1.5 V, VOS = 10 | typ 0.56 · max 0.63 mA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | HSE bypass; 8 MHz; range 2, VCORE = 1.5 V, VOS = 10 | typ 1.1 · max 1.2 mA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | HSE bypass; 16 MHz; range 2, VCORE = 1.5 V, VOS = 10 | typ 2.1 · max 2.3 mA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | HSE bypass; 16 MHz; range 1, VCORE = 1.8 V, VOS = 01 | typ 2.5 · max 2.7 mA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | HSI; 32 MHz; range 1, VCORE = 1.8 V, VOS = 01 | typ 5.1 · max 5.7 mA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | MSI; 65 kHz; range 3, VCORE = 1.2 V, VOS = 11 | typ 34.5 · max 110 uA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | MSI; 524 kHz; range 3, VCORE = 1.2 V, VOS = 11 | typ 86 · max 150 uA | 57 |
| Supply current in Run mode, code executed from Flash IDD (Run from Flash) | MSI; 4.2 MHz; range 3, VCORE = 1.2 V, VOS = 11 | typ 505 · max 570 uA | 57 |
| Supply current in Run mode, code executed from Flash memory IDD (Run from Flash) | HSE bypass; range 3, VCORE = 1.2 V; 4 MHz; Dhrystone | typ 460 uA | 57 |
| Supply current in Run mode, code executed from Flash memory IDD (Run from Flash) | HSE bypass; range 3, VCORE = 1.2 V; 4 MHz; CoreMark | typ 455 uA | 57 |
| Supply current in Run mode, code executed from Flash memory IDD (Run from Flash) | HSE bypass; range 3, VCORE = 1.2 V; 4 MHz; Fibonacci | typ 330 uA | 57 |
| Supply current in Run mode, code executed from Flash memory IDD (Run from Flash) | HSE bypass with PLL; range 1, VCORE = 1.8 V; 32 MHz; Fibonacci | typ 5 mA | 57 |
| Supply current in Run mode, code executed from Flash memory IDD (Run from Flash) | HSE bypass with PLL; range 1, VCORE = 1.8 V; 32 MHz; while(1) | typ 4.35 mA | 57 |
| Supply current in Run mode, code executed from Flash memory IDD (Run from Flash) | HSE bypass with PLL; range 1, VCORE = 1.8 V; 32 MHz; while(1), prefetch OFF | typ 3.85 mA | 57 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | HSE bypass; range 3, VCORE = 1.2 V; 1 MHz | typ 115 · max 170 uA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | HSE bypass; range 3, VCORE = 1.2 V; 2 MHz | typ 210 · max 250 uA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | HSE bypass; range 3, VCORE = 1.2 V; 4 MHz | typ 385 · max 420 uA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | HSE bypass; range 2, VCORE = 1.5 V; 4 MHz | typ 0.48 · max 0.6 mA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | HSE bypass; range 2, VCORE = 1.5 V; 8 MHz | typ 0.935 · max 1.1 mA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | HSE bypass; range 2, VCORE = 1.5 V; 16 MHz | typ 1.8 · max 2 mA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | HSE bypass; range 1, VCORE = 1.8 V; 8 MHz | typ 1.1 · max 1.3 mA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | HSE bypass; range 1, VCORE = 1.8 V; 16 MHz | typ 2.1 · max 2.3 mA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | HSE bypass with PLL; range 1, VCORE = 1.8 V; 32 MHz | typ 4.5 · max 4.7 mA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | MSI; range 3, VCORE = 1.2 V; 65 kHz | typ 22 · max 52 uA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | MSI; range 3, VCORE = 1.2 V; 524 kHz | typ 70.5 · max 91 uA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | MSI; range 3, VCORE = 1.2 V; 4.2 MHz | typ 420 · max 450 uA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | HSI16; range 2, VCORE = 1.5 V; 16 MHz | typ 1.95 · max 2.2 mA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | HSI16; range 1, VCORE = 1.8 V; 32 MHz | typ 4.7 · max 5.1 mA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | HSE bypass; range 3, VCORE = 1.2 V; 4 MHz; Dhrystone | typ 385 uA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | HSE bypass; range 3, VCORE = 1.2 V; 4 MHz; CoreMark | typ 395 uA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | HSE bypass; range 3, VCORE = 1.2 V; 4 MHz; Fibonacci | typ 360 uA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | HSE bypass; range 3, VCORE = 1.2 V; 4 MHz; while(1) | typ 265 uA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | HSE bypass with PLL; range 1, VCORE = 1.8 V; 32 MHz; Dhrystone | typ 4.5 mA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | HSE bypass with PLL; range 1, VCORE = 1.8 V; 32 MHz; CoreMark | typ 4.65 mA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | HSE bypass with PLL; range 1, VCORE = 1.8 V; 32 MHz; Fibonacci | typ 4.2 mA | 59 |
| Supply current in Run mode, code executed from RAM, Flash switched OFF IDD (Run from RAM) | HSE bypass with PLL; range 1, VCORE = 1.8 V; 32 MHz; while(1) | typ 3.05 mA | 59 |
| Supply current in Sleep mode, Flash memory OFF IDD (Sleep) | HSE bypass; range 3, VCORE = 1.2 V; 1 MHz | typ 36.5 · max 87 uA | 60 |
| Supply current in Sleep mode, Flash memory OFF IDD (Sleep) | HSE bypass; range 3, VCORE = 1.2 V; 2 MHz | typ 58 · max 100 uA | 60 |
| Supply current in Sleep mode, Flash memory OFF IDD (Sleep) | HSE bypass; range 3, VCORE = 1.2 V; 4 MHz | typ 100 · max 170 uA | 60 |
| Supply current in Sleep mode, Flash memory OFF IDD (Sleep) | HSE bypass; range 2, VCORE = 1.5 V; 4 MHz | typ 125 · max 190 uA | 60 |
| Supply current in Sleep mode, Flash memory OFF IDD (Sleep) | HSE bypass; range 2, VCORE = 1.5 V; 8 MHz | typ 230 · max 310 uA | 60 |
| Supply current in Sleep mode, Flash memory OFF IDD (Sleep) | HSE bypass; range 2, VCORE = 1.5 V; 16 MHz | typ 450 · max 540 uA | 60 |
| Supply current in Sleep mode, Flash memory OFF IDD (Sleep) | HSE bypass; range 1, VCORE = 1.8 V; 8 MHz | typ 275 · max 360 uA | 60 |
| Supply current in Sleep mode, Flash memory OFF IDD (Sleep) | HSE bypass; range 1, VCORE = 1.8 V; 16 MHz | typ 555 · max 650 uA | 60 |
| Supply current in Sleep mode, Flash memory OFF IDD (Sleep) | HSI16; range 2, VCORE = 1.5 V; 16 MHz | typ 585 · max 690 uA | 60 |
| Supply current in Sleep mode, Flash memory OFF IDD (Sleep) | HSI16; range 1, VCORE = 1.8 V; 32 MHz | typ 1500 · max 1700 uA | 60 |
| Supply current in Sleep mode, Flash memory OFF IDD (Sleep) | MSI; range 3, VCORE = 1.2 V; 65 kHz | typ 17 · max 43 uA | 60 |
| Supply current in Sleep mode, Flash memory OFF IDD (Sleep) | MSI; range 3, VCORE = 1.2 V; 524 kHz | typ 28 · max 55 uA | 60 |
| Supply current in Sleep mode, Flash memory OFF IDD (Sleep) | MSI; range 3, VCORE = 1.2 V; 4.2 MHz | typ 115 · max 190 uA | 60 |
| Supply current in Sleep mode, Flash memory ON IDD (Sleep) | HSE bypass; range 3, VCORE = 1.2 V; 1 MHz | typ 49 · max 160 uA | 60 |
| Supply current in Sleep mode, Flash memory ON IDD (Sleep) | HSE bypass; range 3, VCORE = 1.2 V; 2 MHz | typ 69 · max 190 uA | 60 |
| Supply current in Sleep mode, Flash memory ON IDD (Sleep) | HSE bypass; range 3, VCORE = 1.2 V; 4 MHz | typ 115 · max 230 uA | 60 |
| Supply current in Sleep mode, Flash memory ON IDD (Sleep) | HSE bypass; range 2, VCORE = 1.5 V; 4 MHz | typ 135 · max 200 uA | 60 |
| Supply current in Sleep mode, Flash memory ON IDD (Sleep) | HSE bypass; range 2, VCORE = 1.5 V; 8 MHz | typ 240 · max 320 uA | 60 |
| Supply current in Sleep mode, Flash memory ON IDD (Sleep) | HSE bypass; range 2, VCORE = 1.5 V; 16 MHz | typ 460 · max 550 uA | 60 |
| Supply current in Sleep mode, Flash memory ON IDD (Sleep) | HSE bypass; range 1, VCORE = 1.8 V; 8 MHz | typ 290 · max 370 uA | 60 |
| Supply current in Sleep mode, Flash memory ON IDD (Sleep) | HSE bypass; range 1, VCORE = 1.8 V; 16 MHz | typ 565 · max 670 uA | 60 |
| Supply current in Sleep mode, Flash memory ON IDD (Sleep) | HSI16; range 2, VCORE = 1.5 V; 16 MHz | typ 600 · max 700 uA | 60 |
| Supply current in Sleep mode, Flash memory ON IDD (Sleep) | HSI16; range 1, VCORE = 1.8 V; 32 MHz | typ 1500 · max 1700 uA | 60 |
| Supply current in Sleep mode, Flash memory ON IDD (Sleep) | MSI; range 3, VCORE = 1.2 V; 65 kHz | typ 28 · max 55 uA | 60 |
| Supply current in Sleep mode, Flash memory ON IDD (Sleep) | MSI; range 3, VCORE = 1.2 V; 524 kHz | typ 39.5 · max 67 uA | 60 |
| Supply current in Sleep mode, Flash memory ON IDD (Sleep) | MSI; range 3, VCORE = 1.2 V; 4.2 MHz | typ 125 · max 200 uA | 60 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; RAM; Flash OFF; VDD = 1.65–3.6 V; MSI 65 kHz, fHCLK = 32 kHz; TA = -40 °C to 25 °C | typ 6.3 · max 8.4 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; RAM; Flash OFF; VDD = 1.65–3.6 V; MSI 65 kHz, fHCLK = 32 kHz; TA = 85 °C | typ 9.15 · max 13 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; RAM; Flash OFF; VDD = 1.65–3.6 V; MSI 65 kHz, fHCLK = 32 kHz; TA = 105 °C | typ 12.5 · max 19 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; RAM; Flash OFF; VDD = 1.65–3.6 V; MSI 65 kHz, fHCLK = 32 kHz; TA = 125 °C | typ 20.5 · max 36 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; RAM; Flash OFF; VDD = 1.65–3.6 V; MSI 65 kHz, fHCLK = 65 kHz; TA = -40 °C to 25 °C | typ 9.45 · max 12 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; RAM; Flash OFF; VDD = 1.65–3.6 V; MSI 65 kHz, fHCLK = 65 kHz; TA = 85 °C | typ 12.5 · max 15 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; RAM; Flash OFF; VDD = 1.65–3.6 V; MSI 65 kHz, fHCLK = 65 kHz; TA = 105 °C | typ 16 · max 22 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; RAM; Flash OFF; VDD = 1.65–3.6 V; MSI 65 kHz, fHCLK = 65 kHz; TA = 125 °C | typ 24 · max 38 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; RAM; Flash OFF; VDD = 1.65–3.6 V; MSI and fHCLK = 131 kHz; TA = -40 °C to 25 °C | typ 17 · max 20 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; RAM; Flash OFF; VDD = 1.65–3.6 V; MSI and fHCLK = 131 kHz; TA = 55 °C | typ 19 · max 21 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; RAM; Flash OFF; VDD = 1.65–3.6 V; MSI and fHCLK = 131 kHz; TA = 85 °C | typ 20.5 · max 24 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; RAM; Flash OFF; VDD = 1.65–3.6 V; MSI and fHCLK = 131 kHz; TA = 125 °C | typ 31.5 · max 46 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; Flash; VDD = 1.65–3.6 V; MSI 65 kHz, fHCLK = 32 kHz; TA = 85 °C | typ 23 · max 27 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; Flash; VDD = 1.65–3.6 V; MSI 65 kHz, fHCLK = 32 kHz; TA = 105 °C | typ 27 · max 33 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; Flash; VDD = 1.65–3.6 V; MSI 65 kHz, fHCLK = 32 kHz; TA = 125 °C | typ 36 · max 52 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; Flash; VDD = 1.65–3.6 V; MSI 65 kHz, fHCLK = 65 kHz; TA = -40 °C to 25 °C | typ 22.5 · max 26 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; Flash; VDD = 1.65–3.6 V; MSI 65 kHz, fHCLK = 65 kHz; TA = 85 °C | typ 27.5 · max 31 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; Flash; VDD = 1.65–3.6 V; MSI 65 kHz, fHCLK = 65 kHz; TA = 105 °C | typ 31 · max 38 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; Flash; VDD = 1.65–3.6 V; MSI 65 kHz, fHCLK = 65 kHz; TA = 125 °C | typ 40.5 · max 56 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; Flash; VDD = 1.65–3.6 V; MSI and fHCLK = 131 kHz; TA = -40 °C to 25 °C | typ 32 · max 36 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; Flash; VDD = 1.65–3.6 V; MSI and fHCLK = 131 kHz; TA = 85 °C | typ 37.5 · max 42 uA | 61 |
| Supply current in Low-power run mode IDD (LP Run) | All peripherals off; Flash; VDD = 1.65–3.6 V; MSI and fHCLK = 131 kHz; TA = 125 °C | typ 50 · max 65 uA | 61 |
| Supply current in Low-power sleep mode IDD (LP Sleep) | All peripherals off; VDD = 1.65–3.6 V; MSI 65 kHz; fHCLK = 32 kHz; Flash OFF; TA = -40 °C to 25 °C | typ 3.2 uA | 62 |
| Supply current in Low-power sleep mode IDD (LP Sleep) | All peripherals off; VDD = 1.65–3.6 V; MSI 65 kHz; fHCLK = 32 kHz; Flash ON; TA = -40 °C to 25 °C | typ 13 · max 19 uA | 62 |
| Supply current in Low-power sleep mode IDD (LP Sleep) | All peripherals off; VDD = 1.65–3.6 V; MSI 65 kHz; fHCLK = 32 kHz; Flash ON; TA = 85 °C | typ 16 · max 21 uA | 62 |
| Supply current in Low-power sleep mode IDD (LP Sleep) | All peripherals off; VDD = 1.65–3.6 V; MSI 65 kHz; fHCLK = 32 kHz; Flash ON; TA = 105 °C | typ 18.5 · max 24 uA | 62 |
| Supply current in Low-power sleep mode IDD (LP Sleep) | All peripherals off; VDD = 1.65–3.6 V; MSI 65 kHz; fHCLK = 32 kHz; Flash ON; TA = 125 °C | typ 23.5 · max 32 uA | 62 |
| Supply current in Low-power sleep mode IDD (LP Sleep) | All peripherals off; VDD = 1.65–3.6 V; MSI and fHCLK = 65 kHz; Flash ON; TA = -40 °C to 25 °C | typ 13.5 · max 19 uA | 62 |
| Supply current in Low-power sleep mode IDD (LP Sleep) | All peripherals off; VDD = 1.65–3.6 V; MSI and fHCLK = 65 kHz; Flash ON; TA = 85 °C | typ 16.5 · max 21 uA | 62 |
| Supply current in Low-power sleep mode IDD (LP Sleep) | All peripherals off; VDD = 1.65–3.6 V; MSI and fHCLK = 65 kHz; Flash ON; TA = 105 °C | typ 18.5 · max 24 uA | 62 |
| Supply current in Low-power sleep mode IDD (LP Sleep) | All peripherals off; VDD = 1.65–3.6 V; MSI and fHCLK = 65 kHz; Flash ON; TA = 125 °C | typ 24 · max 33 uA | 62 |
| Supply current in Low-power sleep mode IDD (LP Sleep) | All peripherals off; VDD = 1.65–3.6 V; MSI and fHCLK = 131 kHz; Flash ON; TA = -40 °C to 25 °C | typ 15.5 · max 21 uA | 62 |
| Supply current in Low-power sleep mode IDD (LP Sleep) | All peripherals off; VDD = 1.65–3.6 V; MSI and fHCLK = 131 kHz; Flash ON; TA = 55 °C | typ 17.5 · max 22 uA | 62 |
| Supply current in Low-power sleep mode IDD (LP Sleep) | All peripherals off; VDD = 1.65–3.6 V; MSI and fHCLK = 131 kHz; Flash ON; TA = 85 °C | typ 18.5 · max 23 uA | 62 |
| Supply current in Low-power sleep mode IDD (LP Sleep) | All peripherals off; VDD = 1.65–3.6 V; MSI and fHCLK = 131 kHz; Flash ON; TA = 105 °C | typ 21 · max 26 uA | 62 |
| Supply current in Low-power sleep mode IDD (LP Sleep) | All peripherals off; VDD = 1.65–3.6 V; MSI and fHCLK = 131 kHz; Flash ON; TA = 125 °C | typ 26 · max 35 uA | 62 |
| Supply current in Stop mode IDD (Stop) | TA = 85°C | typ 1.35 · max 4.2 uA | 63 |
| Supply current in Standby mode IDD (Standby) | Independent watchdog and LSI enabled; TA = 85 °C | typ 1 · max 2 uA | 64 |
| WWDG | VDD = 3.0 V, TA = 25 °C; range 1, VCORE = 1.8 V | typ 3 uA/MHz (fHCLK) | 65 |
| WWDG | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V | typ 2 uA/MHz (fHCLK) | 65 |
| WWDG | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V | typ 2 uA/MHz (fHCLK) | 65 |
| WWDG | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run | typ 2 uA/MHz (fHCLK) | 65 |
| LPUART1 | VDD = 3.0 V, TA = 25 °C; range 1, VCORE = 1.8 V | typ 8 uA/MHz (fHCLK) | 65 |
| LPUART1 | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V | typ 6.5 uA/MHz (fHCLK) | 65 |
| LPUART1 | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V | typ 5.5 uA/MHz (fHCLK) | 65 |
| LPUART1 | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run | typ 6 uA/MHz (fHCLK) | 65 |
| I2C1 | VDD = 3.0 V, TA = 25 °C; range 1, VCORE = 1.8 V | typ 11 uA/MHz (fHCLK) | 65 |
| I2C1 | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V | typ 9.5 uA/MHz (fHCLK) | 65 |
| I2C1 | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V | typ 7.5 uA/MHz (fHCLK) | 65 |
| I2C1 | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run | typ 9 uA/MHz (fHCLK) | 65 |
| LPTIM1 | VDD = 3.0 V, TA = 25 °C; range 1, VCORE = 1.8 V | typ 10 uA/MHz (fHCLK) | 65 |
| LPTIM1 | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V | typ 8.5 uA/MHz (fHCLK) | 65 |
| LPTIM1 | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V | typ 6.5 uA/MHz (fHCLK) | 65 |
| LPTIM1 | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run | typ 8 uA/MHz (fHCLK) | 65 |
| TIM2 | VDD = 3.0 V, TA = 25 °C; range 1, VCORE = 1.8 V | typ 10.5 uA/MHz (fHCLK) | 65 |
| TIM2 | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V | typ 8.5 uA/MHz (fHCLK) | 65 |
| TIM2 | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V | typ 7 uA/MHz (fHCLK) | 65 |
| TIM2 | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run | typ 9 uA/MHz (fHCLK) | 65 |
| USART2 | VDD = 3.0 V, TA = 25 °C; range 1, VCORE = 1.8 V | typ 14.5 uA/MHz (fHCLK) | 65 |
| USART2 | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V | typ 12 uA/MHz (fHCLK) | 65 |
| USART2 | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V | typ 9.5 uA/MHz (fHCLK) | 65 |
| USART2 | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run | typ 11 uA/MHz (fHCLK) | 65 |
| ADC1 | VDD = 3.0 V, TA = 25 °C; range 1, VCORE = 1.8 V; HSI off | typ 5.5 uA/MHz (fHCLK) | 65 |
| ADC1 | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V; HSI off | typ 5 uA/MHz (fHCLK) | 65 |
| ADC1 | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V; HSI off | typ 3.5 uA/MHz (fHCLK) | 65 |
| ADC1 | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run; HSI off | typ 4 uA/MHz (fHCLK) | 65 |
| SPI1 | VDD = 3.0 V, TA = 25 °C; range 1, VCORE = 1.8 V | typ 4 uA/MHz (fHCLK) | 65 |
| SPI1 | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V | typ 3 uA/MHz (fHCLK) | 65 |
| SPI1 | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V | typ 3 uA/MHz (fHCLK) | 65 |
| SPI1 | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run | typ 2.5 uA/MHz (fHCLK) | 65 |
| TIM21 | VDD = 3.0 V, TA = 25 °C; range 1, VCORE = 1.8 V | typ 7.5 uA/MHz (fHCLK) | 65 |
| TIM21 | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V | typ 6 uA/MHz (fHCLK) | 65 |
| TIM21 | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V | typ 5 uA/MHz (fHCLK) | 65 |
| TIM21 | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run | typ 5.5 uA/MHz (fHCLK) | 65 |
| TIM22 | VDD = 3.0 V, TA = 25 °C; range 1, VCORE = 1.8 V | typ 7 uA/MHz (fHCLK) | 65 |
| TIM22 | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V | typ 6 uA/MHz (fHCLK) | 65 |
| TIM22 | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V | typ 5 uA/MHz (fHCLK) | 65 |
| TIM22 | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run | typ 6 uA/MHz (fHCLK) | 65 |
| DBGMCU | VDD = 3.0 V, TA = 25 °C; range 1, VCORE = 1.8 V | typ 1.5 uA/MHz (fHCLK) | 65 |
| DBGMCU | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V | typ 1 uA/MHz (fHCLK) | 65 |
| DBGMCU | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V | typ 1 uA/MHz (fHCLK) | 65 |
| DBGMCU | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run | typ 0.5 uA/MHz (fHCLK) | 65 |
| SYSCFG | VDD = 3.0 V, TA = 25 °C; range 1, VCORE = 1.8 V | typ 2.5 uA/MHz (fHCLK) | 65 |
| SYSCFG | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V | typ 2 uA/MHz (fHCLK) | 65 |
| SYSCFG | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V | typ 2 uA/MHz (fHCLK) | 65 |
| SYSCFG | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run | typ 1.5 uA/MHz (fHCLK) | 65 |
| GPIOA | VDD = 3.0 V, TA = 25 °C; range 1, VCORE = 1.8 V | typ 3.5 uA/MHz (fHCLK) | 65 |
| GPIOA | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V | typ 3 uA/MHz (fHCLK) | 65 |
| GPIOA | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V | typ 2.5 uA/MHz (fHCLK) | 65 |
| GPIOA | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run | typ 2.5 uA/MHz (fHCLK) | 65 |
| GPIOB | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V | typ 2.5 uA/MHz (fHCLK) | 65 |
| GPIOB | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V | typ 2 uA/MHz (fHCLK) | 65 |
| GPIOB | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run | typ 2.5 uA/MHz (fHCLK) | 65 |
| GPIOC | VDD = 3.0 V, TA = 25 °C; range 1, VCORE = 1.8 V | typ 8.5 uA/MHz (fHCLK) | 65 |
| GPIOC | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V | typ 6.5 uA/MHz (fHCLK) | 65 |
| GPIOC | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V | typ 5.5 uA/MHz (fHCLK) | 65 |
| GPIOC | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run | typ 7 uA/MHz (fHCLK) | 65 |
| GPIOH | VDD = 3.0 V, TA = 25 °C; range 1, VCORE = 1.8 V | typ 1.5 uA/MHz (fHCLK) | 65 |
| GPIOH | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V | typ 1 uA/MHz (fHCLK) | 65 |
| GPIOH | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V | typ 1 uA/MHz (fHCLK) | 65 |
| GPIOH | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run | typ 0.5 uA/MHz (fHCLK) | 65 |
| CRC | VDD = 3.0 V, TA = 25 °C; range 1, VCORE = 1.8 V | typ 1.5 uA/MHz (fHCLK) | 65 |
| CRC | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V | typ 1 uA/MHz (fHCLK) | 65 |
| CRC | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V | typ 1 uA/MHz (fHCLK) | 65 |
| CRC | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run | typ 1 uA/MHz (fHCLK) | 65 |
| FLASH | VDD = 3.0 V, TA = 25 °C; range 1, VCORE = 1.8 V; negligible consumption | typ 0 uA/MHz (fHCLK) | 65 |
| FLASH | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V; negligible consumption | typ 0 uA/MHz (fHCLK) | 65 |
| FLASH | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V; negligible consumption | typ 0 uA/MHz (fHCLK) | 65 |
| FLASH | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run; negligible consumption | typ 0 uA/MHz (fHCLK) | 65 |
| DMA1 | VDD = 3.0 V, TA = 25 °C; range 1, VCORE = 1.8 V | typ 10 uA/MHz (fHCLK) | 65 |
| DMA1 | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V | typ 8 uA/MHz (fHCLK) | 65 |
| DMA1 | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V | typ 6.5 uA/MHz (fHCLK) | 65 |
| DMA1 | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run | typ 8.5 uA/MHz (fHCLK) | 65 |
| All enabled | VDD = 3.0 V, TA = 25 °C; range 1, VCORE = 1.8 V | typ 101 uA/MHz (fHCLK) | 65 |
| All enabled | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V | typ 83 uA/MHz (fHCLK) | 65 |
| All enabled | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V | typ 66 uA/MHz (fHCLK) | 65 |
| All enabled | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run | typ 85 uA/MHz (fHCLK) | 65 |
| PWR | VDD = 3.0 V, TA = 25 °C; range 1, VCORE = 1.8 V | typ 2.5 uA/MHz (fHCLK) | 65 |
| PWR | VDD = 3.0 V, TA = 25 °C; range 2, VCORE = 1.5 V | typ 2 uA/MHz (fHCLK) | 65 |
| PWR | VDD = 3.0 V, TA = 25 °C; range 3, VCORE = 1.2 V | typ 2 uA/MHz (fHCLK) | 65 |
| PWR | VDD = 3.0 V, TA = 25 °C; Low-power sleep and run | typ 1 uA/MHz (fHCLK) | 65 |
| LSE oscillator frequency fLSE | typ 32.768 kHz | 71 | |
| Maximum critical crystal transconductance Gm | LSEDRV[1:0]=00, lower driving capability | max 0.5 uA/V | 71 |
| Maximum critical crystal transconductance Gm | LSEDRV[1:0]=01, medium low driving capability | max 0.75 uA/V | 71 |
| Maximum critical crystal transconductance Gm | LSEDRV[1:0]=10, medium high driving capability | max 1.7 uA/V | 71 |
| Maximum critical crystal transconductance Gm | LSEDRV[1:0]=11, higher driving capability | max 2.7 uA/V | 71 |
| Startup time tSU(LSE) | VDD is stabilized | typ 2 s | 71 |
| PLL input clock fPLL_IN | min 2 · max 24 MHz | 75 | |
| PLL input clock duty cycle fPLL_IN | min 45 · max 55 % | 75 | |
| PLL output clock fPLL_OUT | min 2 · max 32 MHz | 75 | |
| Lock time tLOCK | PLL input = 16 MHz; PLL VCO = 96 MHz | typ 115 · max 160 us | 75 |
| Cycle-to-cycle jitter Jitter | max 600 ps | 75 | |
| Current consumption on VDDA IDDA(PLL) | typ 220 · max 450 uA | 75 | |
| Current consumption on VDD IDD(PLL) | typ 120 · max 150 uA | 75 | |
| Data retention mode VRM | STOP mode (or RESET) | min 1.65 V | 75 |
| Operating voltage Read / Write / Erase VDD | min 1.65 · max 3.6 V | 75 | |
| Programming time for word or half-page tprog | Erasing | typ 3.28 · max 3.94 ms | 75 |
| Programming time for word or half-page tprog | Programming | typ 3.28 · max 3.94 ms | 75 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | TA = +25 °C, conforming to ANSI/JEDEC JS-001; Class 2 | max 2000 V | 78 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | TA = +25 °C, conforming to ANSI/ESD STM5.3.1.; Class C4 | max 500 V | 78 |
| Output low level voltage for an I/O pin VOL | CMOS port, IIO = +8 mA, 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 82 |
| Output low level voltage for an I/O pin VOL | TTL port, IIO =+ 8 mA, 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 82 |
| Output high level voltage for an I/O pin VOH | TTL port, IIO = –6 mA, 2.7 V ≤ VDD ≤ 3.6 V | min 2.4 V | 82 |
| Output low level voltage for an I/O pin VOL | IIO = +15 mA, 2.7 V ≤ VDD ≤ 3.6 V | max 1.3 V | 82 |
| Output low level voltage for an I/O pin VOL | IIO = +4 mA, 1.65 V ≤ VDD< 3.6 V | max 0.45 V | 82 |
| Output low level voltage for an FTf I/O pin in Fm+ mode VOLFM+ | IIO = 20 mA, 2.7 V ≤ VDD ≤ 3.6 V | max 0.4 V | 82 |
| Output low level voltage for an FTf I/O pin in Fm+ mode VOLFM+ | IIO = 10 mA, 1.65 V ≤ VDD ≤ 3.6 V | max 0.4 V | 82 |
| Analog supply voltage for ADC on VDDA | Fast channel | min 1.65 · max 3.6 V | 85 |
| Analog supply voltage for ADC on VDDA | Standard channel; minimum subject to footnote 1 | min 1.75 · max 3.6 V | 85 |
| Current consumption of the ADC on VDDA IDDA (ADC) | 1.14 Msps | typ 200 uA | 85 |
| Current consumption of the ADC on VDDA IDDA (ADC) | 10 ksps | typ 40 uA | 85 |
| Current consumption of the ADC on VDD IDDA (ADC) | 1.14 Msps; additional APB clock-dependent consumption per footnote 2 | typ 70 uA | 85 |
| Current consumption of the ADC on VDD IDDA (ADC) | 10 ksps; additional APB clock-dependent consumption per footnote 2 | typ 1 uA | 85 |
| ADC clock frequency fADC | Voltage scaling Range 1 | min 0.14 · max 16 MHz | 85 |
| ADC clock frequency fADC | Voltage scaling Range 2 | min 0.14 · max 8 MHz | 85 |
| ADC clock frequency fADC | Voltage scaling Range 3 | min 0.14 · max 4 MHz | 85 |
| Sampling rate fS | min 0.05 · max 1.14 MHz | 85 | |
| External trigger frequency fTRIG | fADC = 16 MHz | max 941 kHz | 85 |
| External trigger frequency fTRIG | max 17 1/fADC | 85 | |
| Conversion voltage range VAIN | min 0 V | 85 | |
| External input impedance RAIN | See Equation 1 and Table 58 for details | max 50 kΩ | 85 |
| Sampling switch resistance RADC | max 1 kΩ | 85 | |
| Internal sample and hold capacitor CADC | max 8 pF | 85 | |
| Calibration time tCAL | fADC = 16 MHz | typ 5.2 us | 86 |
| Calibration time tCAL | typ 83 1/fADC | 86 | |
| ADC_DR register write latency WLATENCY | ADC clock = PCLK/4 | typ 8.5 fPCLK cycle | 86 |
| Trigger conversion latency tlatr | fADC = fPCLK/2 = 16 MHz | typ 0.266 us | 86 |
| Trigger conversion latency tlatr | fADC = fPCLK/2 | typ 8.5 1/fPCLK | 86 |
| Trigger conversion latency tlatr | fADC = fPCLK/4 = 8 MHz | typ 0.516 us | 86 |
| Trigger conversion latency tlatr | fADC = fPCLK/4 | typ 16.5 1/fPCLK | 86 |
| ADC jitter on trigger conversion JitterADC | fADC = fHSI16 = 16 MHz | min 0.252 · max 0.26 us | 86 |
| ADC jitter on trigger conversion JitterADC | fADC = fHSI16 | typ 1 1/fHSI16 | 86 |
| Sampling time tS | fADC = 16 MHz | min 0.093 · max 10.03 us | 86 |
| Sampling time tS | min 1.5 · max 239.5 1/fADC | 86 | |
| Power-up time tSTAB | min 0 · typ 0 · max 1 us | 86 | |
| Total conversion time (including sampling time) tConV | fADC = 16 MHz | min 0.875 · max 10.81 us | 86 |
| VSENSE linearity with temperature TL | Values are ± magnitudes | typ 1 · max 2 °C | 89 |
| Average slope Avg_Slope | min 1.48 · typ 1.61 · max 1.75 mV/°C | 89 | |
| Voltage at 130°C ±5°C V130 | VDD = 3 V ±10 mV | min 640 · typ 670 · max 700 mV | 89 |
| Current consumption IDDA(TEMP) | typ 3.4 · max 6 uA | 89 | |
| Startup time tSTART | max 10 us | 89 | |
| ADC sampling time when reading the temperature TS_temp | min 10 us | 89 | |
| Analog supply voltage VDDA | min 1.65 · max 3.6 V | 89 | |
| R400K value R400K | typ 400 kΩ | 89 | |
| R10K value R10K | typ 10 kΩ | 89 | |
| Comparator 1 input voltage range VIN | min 0.6 V | 89 | |
| Comparator startup time tSTART | typ 7 · max 10 us | 89 | |
| Propagation delay td | 100 mV input step with 10 mV overdrive on inverting input; non-inverting input set to reference | typ 3 · max 10 us | 89 |
| Comparator offset Voffset | Values are ± magnitudes | typ 3 · max 10 mV | 89 |
| Comparator offset variation in worst voltage stress conditions dVoffset/dt | VDDA = 3.6 V, VIN+ = 0 V, VIN- = VREFINT, TA = 25 ° C | min 0 · typ 1.5 · max 10 mV/1000 h | 89 |
| Current consumption ICOMP1 | Comparator consumption only; internal reference voltage not included | typ 160 · max 260 nA | 89 |
| Analog supply voltage VDDA | min 1.65 · max 3.6 V | 90 | |
| Comparator 2 input voltage range VIN | min 0 V | 90 | |
| Comparator startup time tSTART | Fast mode | typ 15 · max 20 us | 90 |
| Comparator startup time tSTART | Slow mode | typ 20 · max 25 us | 90 |
| Propagation delay in slow mode td slow | 1.65 V ≤ VDDA ≤ 2.7 V; 100 mV input step with 10 mV overdrive on inverting input, non-inverting input set to reference | typ 1.8 · max 3.5 us | 90 |
| Propagation delay in slow mode td slow | 2.7 V ≤ VDDA ≤ 3.6 V; 100 mV input step with 10 mV overdrive on inverting input, non-inverting input set to reference | typ 2.5 · max 6 us | 90 |
| Propagation delay in fast mode td fast | 1.65 V ≤ VDDA ≤ 2.7 V; 100 mV input step with 10 mV overdrive on inverting input, non-inverting input set to reference | typ 0.8 · max 2 us | 90 |
| Propagation delay in fast mode td fast | 2.7 V ≤ VDDA ≤ 3.6 V; 100 mV input step with 10 mV overdrive on inverting input, non-inverting input set to reference | typ 1.2 · max 4 us | 90 |
| Comparator offset error Voffset | Values are ± magnitudes | typ 4 · max 20 mV | 90 |
| Threshold voltage temperature coefficient dThreshold/dt | VDDA = 3.3V; TA = 0 to 50 ° C; V- = VREFINT, 3/4 VREFINT, 1/2 VREFINT, 1/4 VREFINT | typ 15 · max 30 ppm/°C | 90 |
| Current consumption ICOMP2 | Fast mode; comparator consumption only, internal reference voltage not included | typ 3.5 · max 5 uA | 90 |
| Current consumption ICOMP2 | Slow mode; comparator consumption only, internal reference voltage not included | typ 0.5 · max 2 uA | 90 |
| Timer resolution time tres(TIM) | min 1 tTIMxCLK | 90 | |
| Timer resolution time tres(TIM) | fTIMxCLK = 32 MHz | min 31.25 ns | 90 |
| Timer external clock frequency on CH1 to CH4 fEXT | min 0 MHz | 90 | |
| Timer external clock frequency on CH1 to CH4 fEXT | fTIMxCLK = 32 MHz | min 0 · max 16 MHz | 90 |
| Timer resolution ResTIM | max 16 bit | 90 |

captainchapster/Eigentime32
A self-contained pocket watch that keeps its own time for a decade. No GPS, one coin cell, one PCB.

mohamedyanis/BaroAxel-Brain
STM32L0 MCU based PCB for Industrial Instrumentation Applications designed using KiCad.

rappet/ferris-badge
Small badge running on a coin cell using a STM32L031G6U with embassy.


Engineer162/CANSAT-M2-2026
This repository contains all the sources for a highly advanced CANSAT based on an STM32 MCU and featuring a rechargeable lithium polymer battery.

tsmiltonAgents/20260721_countdown
A 46 × 23 mm, 4-layer keyring PCB that counts down the hours to 10 October 2026, midday on a red 4-digit 7-segment display.

Engineer162/CANSAT-M2-2026
This repository contains all the sources for a highly advanced CANSAT based on an STM32 MCU and featuring a rechargeable lithium polymer battery.
Yes. The symbol is MCU_ST_STM32L0:STM32L031G6Ux and the footprint Package_DFN_QFN:QFN-28_4x4mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
UFQFPN-28(4x4), with 28 pins. Its footprint is drawn on this page.
STMicroelectronics publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C883300, with 6,373 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the STM32G031G8U6 by STMicroelectronics, the STM32F031G6U6 by STMicroelectronics, the STM32F042G6U6 by STMicroelectronics and the STM32F042G6U6TR by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
7 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.