Skip to the content

STM32F031G6U6

STMicroelectronicsExtended

-40℃~+85℃ 12bit 23 2V~3.6V 32 Bit 32KB 48MHz 4KB ARM Cortex-M0 Built-in FLASH UFQFPN-28(4x4) Microcontrollers (MCU/MPU/SOC) ROHS

Part id
st/STM32F031G6U6
Category
Microcontrollers (MCU, MPU, SOC)
Package
UFQFPN-28(4x4)
Pins
28
In stock
3,733 at JLCPCB (C2053303)
Used on
3 open-source boards

Overview

The STM32F031G6U6 is a microcontroller made by STMicroelectronics in a UFQFPN-28(4x4) package with 28 pins. -40℃~+85℃ 12bit 23 2V~3.6V 32 Bit 32KB 48MHz 4KB ARM Cortex-M0 Built-in FLASH UFQFPN-28(4x4) Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_ST_STM32F0:STM32F031G6Ux, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-28_4x4mm_P0.5mm, from KiCad's library), ready for a KiCad board. 3,733 are in stock at JLCPCB (part C2053303). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1BOOT02PF03PF14NRST5VDDA6PA07PA18PA29PA310PA411PA512PA613PA714PB015PB116VSS17VDD18PA819PA920PA1021PA1322PA1423PA1524PB325PB426PB527PB628PB7
MCU_ST_STM32F0:STM32F031G6UxFrom KiCad's library

Footprint

Package_DFN_QFN:QFN-28_4x4mm_P0.5mmFrom KiCad's library

From the datasheet

19
Supply, least
2 V · VDD, recommended operating, min · p. 41
Supply, most
3.6 V · VDD, recommended operating, max · p. 41
Supply, least
2.4 V · VDDA, ADC used, recommended operating, min · p. 41
Supply, most
3.6 V · VDDA, recommended operating, max · p. 41
Supply, least
1.65 V · VBAT, recommended operating, min · p. 41
Supply, most
3.6 V · VBAT, recommended operating, max · p. 41
Supply, absolute maximum
4 V · VDD, absolute maximum · p. 39
Supply, absolute maximum
4 V · VDDA, absolute maximum · p. 39
Supply, absolute maximum
4 V · VBAT, absolute maximum · p. 39
Works from
-40 °C · ambient, temperature suffix 6, min · p. 101
Works up to
85 °C · ambient, temperature suffix 6, max · p. 101
Works up to
105 °C · ambient, suffix 6, low dissipation with TJ ≤ 105 °C, max · p. 41
Junction, hottest
105 °C · junction, temperature suffix 6, operating max · p. 41
Junction, hottest
150 °C · junction, absolute maximum · p. 40
Takes working
18.56 mA · sum of VDD and VDDA, 3.6 V, run from Flash, 48 MHz HSE PLL, all peripherals on, typical · p. 45
Takes at most
21.78 mA · sum of VDD and VDDA, 3.6 V, run from Flash, 48 MHz HSI PLL, all peripherals on, 105 °C, max · p. 45
Takes asleep
2.52 µA · sum of VDD and VDDA, 3.6 V, standby, LSI and IWDG off, VDDA monitoring off, typical · p. 47
A pin gives at most
25 mA · each I/O or control pin, sink, absolute maximum · p. 40
Junction to air (UFQFPN28 - 4 × 4 mm)
118 K/W · junction to ambient · p. 98

Open-source boards using it

3
  • 2 layers74.9 × 20.3 mmRt soldering iron, the printed circuit board in 3D

    Rt soldering iron

    kcuzner/rt-soldering-iron

    Soldering iron driver board for Weller RT tips. A work in progress. Firmware in rust.

    126 parts6
  • 4 layers31.8 × 27.5 mmProtopoint, the printed circuit board in 3D

    Protopoint

    lab11/polypoint

    Indoor localization based on the DecaWave DW1000.

    57 parts143Apache-2.0
  • 2 layers45 × 45 mmMotor-2, the printed circuit board in 3D

    Motor-2

    mkramar/dizzyrobot

    64 parts13

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the STM32F031G6U6?

Yes. The symbol is MCU_ST_STM32F0:STM32F031G6Ux and the footprint Package_DFN_QFN:QFN-28_4x4mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the STM32F031G6U6?

UFQFPN-28(4x4), with 28 pins. Its footprint is drawn on this page.

Where is the STM32F031G6U6 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the STM32F031G6U6?

JLCPCB lists it as part C2053303, with 3,733 in stock; the sellers' links on this page open their listings.

What can replace the STM32F031G6U6?

Parts like it in the library: the STM32G031G8U6 by STMicroelectronics, the STM32F042G6U6 by STMicroelectronics, the STM32F042G6U6TR by STMicroelectronics and the STM32C031G6U6 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the STM32F031G6U6?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.