4 layers34.8 × 18 mm
STM32F042G6U6
STMicroelectronicsExtended
-40℃~+85℃ 1.65V~3.6V 12bit 24 32 Bit 32KB 48MHz 6KB ARM Cortex-M0 Built-in FLASH UFQFPN-28(4x4) Microcontrollers (MCU/MPU/SOC) ROHS
- Part id
- st/STM32F042G6U6
- Category
- Microcontrollers (MCU, MPU, SOC)
- Package
- UFQFPN-28(4x4)
- Pins
- 28
- In stock
- 1,089 at JLCPCB (C961597)
- Used on
- 6 open-source boards
Overview
The STM32F042G6U6 is a microcontroller made by STMicroelectronics in a UFQFPN-28(4x4) package with 28 pins. -40℃~+85℃ 1.65V~3.6V 12bit 24 32 Bit 32KB 48MHz 6KB ARM Cortex-M0 Built-in FLASH UFQFPN-28(4x4) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32F0:STM32F042G6Ux, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-28_4x4mm_P0.5mm, from KiCad's library), ready for a KiCad board. 1,089 are in stock at JLCPCB (part C961597). 6 open-source boards in 6 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
17- Supply, least
- 2 V · VDD, recommended operating min · p. 47
- Supply, most
- 3.6 V · VDD, recommended operating max · p. 47
- Supply, least
- 1.65 V · VDDIO2, recommended operating min; VDD must be present · p. 47
- Supply, least
- 2.4 V · VDDA, recommended operating min with ADC used; at least VDD · p. 47
- Supply, absolute maximum
- 4 V · VDD, absolute max · p. 45
- Works from
- -40 °C · ambient min, suffix 6, maximum power dissipation · p. 47
- Works up to
- 85 °C · ambient max, suffix 6, maximum power dissipation · p. 47
- Works up to
- 105 °C · ambient max, suffix 6, low power dissipation; junction limit applies · p. 47
- Junction, hottest
- 150 °C · junction absolute max · p. 46
- Junction, hottest
- 105 °C · junction operating max, suffix 6 · p. 47
- Takes working
- 20.74 mA · sum of VDD and VDDA typical Run currents, 48 MHz HSI PLL, Flash, peripherals enabled, supplies 3.6 V · p. 50
- Takes at most
- 23.74 mA · sum of VDD and VDDA max Run currents at 85 °C, 48 MHz HSI48, Flash, peripherals enabled, supplies 3.6 V · p. 50
- Takes asleep
- 3.6 µA · sum of VDD and VDDA typical Standby currents, supplies 3.6 V, LSI and IWDG off, VDDA monitoring on · p. 53
- A pin gives at most
- 25 mA · absolute max sink current per I/O or control pin · p. 46
- Junction to air (UFQFPN28 - 4 mm x 4 mm)
- 118 K/W · junction to ambient thermal resistance · p. 111
- Takes working
- 20.86 mA · sum of VDD and VDDA typical Run currents, 48 MHz, peripherals enabled, 3.3 V · p. 55
- A pin gives at most
- 20 mA · GPIO source or sink max with relaxed VOL/VOH · p. 75
What it is and has
27- Core
- ARM 32-bit Cortex-M0 · p. 1
- CPU clock
- up to 48 MHz · p. 1
- Flash memory
- 32 Kbyte · p. 113
- SRAM
- 6 Kbytes with hardware parity · p. 1
- CRC
- CRC calculation unit · p. 1
- DMA
- 5 channels · p. 1
- ADC
- One 12-bit ADC, 1.0 µs, up to 10 channels · p. 1
- Touch sensing
- Up to 14 capacitive sensing channels · p. 1
- Timers
- Nine · p. 1
- Watchdogs
- Independent and system watchdog timers · p. 1
- CAN
- CAN interface · p. 1
- USB
- USB 2.0 full-speed interface · p. 1
- HDMI CEC
- Wakeup on header reception · p. 1
- Debug
- Serial wire debug · p. 1
- Unique ID
- 96-bit · p. 1
- Environmental compliance
- ECOPACK2 · p. 1
- I2C
- I2C1; Standard mode up to 100 kbit/s, Fast mode up to 400 kbit/s, Fast Mode Plus up to 1 Mbit/s · p. 24
- I2C output drive
- 20 mA · p. 24
- Pin count
- 28 · p. 113
- Package
- UFQFPN28, 4 mm x 4 mm · p. 111
- Core
- ARM® 32-bit Cortex®-M0 CPU · p. 1
- CPU frequency
- Up to 48 MHz · p. 1
- SRAM
- 6 Kbytes with HW parity · p. 1
- Timers
- Nine timers · p. 1
- Maximum CPU frequency
- 48 MHz · p. 1
- Watchdog timers
- Independent and system watchdog timers · p. 1
- Package
- UFQFPN28 4x4 mm · p. 1
Around it
1- cap 5 pF to 20 pF
- between OSC_IN and GND; CL1; high-quality external ceramic, designed for high-frequency applications; select for crystal load requirements and place close to oscillator pins. · p. 62
Specifications
891| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| External main supply voltage VDD–VSS | min -0.3 · max 4 V | 45 | |
| External I/O supply voltage VDDIO2–VSS | min -0.3 · max 4 V | 45 | |
| External analog supply voltage VDDA–VSS | min -0.3 · max 4 V | 45 | |
| Allowed voltage difference for VDD > VDDA VDD–VDDA | VDD > VDDA | max 0.4 V | 45 |
| External backup supply voltage VBAT–VSS | VBAT not separately bonded on UFQFPN28 | min -0.3 · max 4 V | 45 |
| Input voltage on TTa pins VIN | Minimum VSS - 0.3 | max 4 V | 45 |
| Input voltage on any other pin VIN | Minimum VSS - 0.3 | max 4 V | 45 |
| Variations between different VDD power pins |∆VDDx| | max 50 mV | 45 | |
| Variations between all the different ground pins |VSSx - VSS| | max 50 mV | 45 | |
| Total current into sum of all VDD power lines (source) ΣIVDD | max 120 mA | 46 | |
| Total current out of sum of all VSS ground lines (sink) ΣIVSS | max -120 mA | 46 | |
| Maximum current into each VDD power pin (source) IVDD(PIN) | max 100 mA | 46 | |
| Maximum current out of each VSS ground pin (sink) IVSS(PIN) | max -100 mA | 46 | |
| Output current sunk by any I/O and control pin IIO(PIN) | max 25 mA | 46 | |
| Output current source by any I/O and control pin IIO(PIN) | max -25 mA | 46 | |
| Total output current sunk by sum of all I/Os and control pins ΣIIO(PIN) | max 80 mA | 46 | |
| Total output current sourced by sum of all I/Os and control pins ΣIIO(PIN) | max -80 mA | 46 | |
| Total output current sourced by sum of all I/Os supplied by VDDIO2 ΣIIO(PIN) | max -40 mA | 46 | |
| Injected current on TC and RST pin IINJ(PIN) | Printed maximum ±5 | max 5 mA | 46 |
| Injected current on TTa pins IINJ(PIN) | Printed maximum ±5; positive injection when VIN > VDDA | max 5 mA | 46 |
| Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) | Printed maximum ±25; absolute sum of positive and negative injected currents | max 25 mA | 46 |
| Storage temperature range TSTG | min -65 · max 150 °C | 46 | |
| Maximum junction temperature TJ | Absolute maximum | max 150 °C | 46 |
| Internal AHB clock frequency fHCLK | min 0 · max 48 MHz | 47 | |
| Internal APB clock frequency fPCLK | min 0 · max 48 MHz | 47 | |
| Standard operating voltage VDD | min 2 · max 3.6 V | 47 | |
| I/O supply voltage VDDIO2 | Must not be supplied if VDD is not present | min 1.65 · max 3.6 V | 47 |
| Analog operating voltage (ADC not used) VDDA | Minimum VDD; potential equal to or higher than VDD | max 3.6 V | 47 |
| Analog operating voltage (ADC used) VDDA | Potential equal to or higher than VDD | min 2.4 · max 3.6 V | 47 |
| Backup operating voltage VBAT | VBAT not separately bonded on UFQFPN28 | min 1.65 · max 3.6 V | 47 |
| I/O input voltage VIN | TC and RST I/O; maximum VDDIOx+0.3 | min -0.3 V | 47 |
| I/O input voltage VIN | TTa I/O; maximum VDDA+0.3; disable internal pull-up for VIN > VDDIOx+0.3 | min -0.3 V | 47 |
| I/O input voltage VIN | FT and FTf I/O; disable internal pull-up for VIN > VDDIOx+0.3 | min -0.3 · max 5.5 V | 47 |
| Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PD | UFQFPN28; suffix 6, TA = 85 °C | max 170 mW | 47 |
| Ambient temperature for the suffix 6 version TA | Maximum power dissipation | min -40 · max 85 °C | 47 |
| Ambient temperature for the suffix 6 version TA | Low power dissipation; TJ must not exceed TJmax | min -40 · max 105 °C | 47 |
| Junction temperature range TJ | Suffix 6 version | min -40 · max 105 °C | 47 |
| VDD rise time rate tVDD | Maximum ∞ | min 0 us/V | 48 |
| VDD fall time rate tVDD | Maximum ∞ | min 20 us/V | 48 |
| VDDA rise time rate tVDDA | Maximum ∞ | min 0 us/V | 48 |
| VDDA fall time rate tVDDA | Maximum ∞ | min 20 us/V | 48 |
| Power on/power down reset threshold VPOR/PDR | Falling edge | min 1.8 · typ 1.88 · max 1.96 V | 48 |
| Power on/power down reset threshold VPOR/PDR | Rising edge | min 1.84 · typ 1.92 · max 2 V | 48 |
| PDR hysteresis VPDRhyst | typ 40 mV | 48 | |
| Reset temporization tRSTTEMPO | min 1.5 · typ 2.5 · max 4.5 ms | 48 | |
| PVD threshold 0 VPVD0 | Rising edge | min 2.1 · typ 2.18 · max 2.26 V | 48 |
| PVD threshold 0 VPVD0 | Falling edge | min 2 · typ 2.08 · max 2.16 V | 48 |
| PVD threshold 1 VPVD1 | Rising edge | min 2.19 · typ 2.28 · max 2.37 V | 48 |
| PVD threshold 1 VPVD1 | Falling edge | min 2.09 · typ 2.18 · max 2.27 V | 48 |
| PVD threshold 2 VPVD2 | Rising edge | min 2.28 · typ 2.38 · max 2.48 V | 48 |
| PVD threshold 2 VPVD2 | Falling edge | min 2.18 · typ 2.28 · max 2.38 V | 48 |
| PVD threshold 3 VPVD3 | Rising edge | min 2.38 · typ 2.48 · max 2.58 V | 48 |
| PVD threshold 3 VPVD3 | Falling edge | min 2.28 · typ 2.38 · max 2.48 V | 48 |
| PVD threshold 4 VPVD4 | Rising edge | min 2.47 · typ 2.58 · max 2.69 V | 48 |
| PVD threshold 4 VPVD4 | Falling edge | min 2.37 · typ 2.48 · max 2.59 V | 48 |
| PVD threshold 5 VPVD5 | Rising edge | min 2.57 · typ 2.68 · max 2.79 V | 48 |
| PVD threshold 5 VPVD5 | Falling edge | min 2.47 · typ 2.58 · max 2.69 V | 48 |
| PVD threshold 6 VPVD6 | Rising edge | min 2.66 · typ 2.78 · max 2.9 V | 49 |
| PVD threshold 6 VPVD6 | Falling edge | min 2.56 · typ 2.68 · max 2.8 V | 49 |
| PVD threshold 7 VPVD7 | Rising edge | min 2.76 · typ 2.88 · max 3 V | 49 |
| PVD threshold 7 VPVD7 | Falling edge | min 2.66 · typ 2.78 · max 2.9 V | 49 |
| PVD hysteresis VPVDhyst | typ 100 mV | 49 | |
| PVD current consumption IDD(PVD) | typ 0.15 · max 0.26 uA | 49 | |
| Internal reference voltage VREFINT | –40 °C < TA < +105 °C | min 1.2 · typ 1.23 · max 1.25 V | 49 |
| ADC_IN17 buffer startup time tSTART | max 10 us | 49 | |
| ADC sampling time when reading the internal reference voltage tS_vrefint | min 4 us | 49 | |
| Internal reference voltage spread over the temperature range ∆VREFINT | VDDA = 3 V | max 10 mV | 49 |
| Temperature coefficient TCoeff | min -100 · max 100 ppm/°C | 49 | |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals enabled; max at 25 °C | typ 20.3 · max 23.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals enabled; max at 85 °C | max 23.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals enabled; max at 105 °C | max 24.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals disabled; max at 25 °C | typ 12.7 · max 14.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals disabled; max at 85 °C | max 14.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals disabled; max at 105 °C | max 14.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max at 25 °C | typ 20.2 · max 22.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max at 85 °C | max 23 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled; max at 105 °C | max 23.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max at 25 °C | typ 12.6 · max 14.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max at 85 °C | max 14.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max at 105 °C | max 14.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max at 25 °C | typ 14 · max 16 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max at 85 °C | max 16.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled; max at 105 °C | max 16.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max at 25 °C | typ 8.7 · max 9.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max at 85 °C | max 9.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max at 105 °C | max 10.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max at 25 °C | typ 11 · max 13.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max at 85 °C | max 13.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled; max at 105 °C | max 13.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max at 25 °C | typ 6.9 · max 7.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max at 85 °C | max 7.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max at 105 °C | max 8.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max at 25 °C | typ 3.9 · max 5.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max at 85 °C | max 5.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled; max at 105 °C | max 5.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max at 25 °C | typ 2.6 · max 3.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max at 85 °C | max 3.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max at 105 °C | max 3.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max at 25 °C | typ 0.9 · max 1.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max at 85 °C | max 1.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled; max at 105 °C | max 1.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max at 25 °C | typ 0.7 · max 1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max at 85 °C | max 1.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max at 105 °C | max 1.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max at 25 °C | typ 20.5 · max 23.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max at 85 °C | max 23.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled; max at 105 °C | max 23.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max at 25 °C | typ 12.8 · max 14.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max at 85 °C | max 14.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max at 105 °C | max 15 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max at 25 °C | typ 14.3 · max 15.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max at 85 °C | max 15.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled; max at 105 °C | max 17 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max at 25 °C | typ 8.6 · max 9.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max at 85 °C | max 9.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max at 105 °C | max 10 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max at 25 °C | typ 11.2 · max 13.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max at 85 °C | max 13.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled; max at 105 °C | max 14.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max at 25 °C | typ 6.9 · max 7.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max at 85 °C | max 7.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max at 105 °C | max 7.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max at 25 °C | typ 4.1 · max 5.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max at 85 °C | max 5.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled; max at 105 °C | max 5.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max at 25 °C | typ 2.6 · max 3.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max at 85 °C | max 3.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max at 105 °C | max 3.3 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, peripherals enabled; max at 25 °C | typ 19.3 · max 21.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, peripherals enabled; max at 85 °C | max 22.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, peripherals enabled; max at 105 °C | max 23.7 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, peripherals disabled; max at 25 °C | typ 11.9 · max 13.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, peripherals disabled; max at 85 °C | max 13.6 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, peripherals disabled; max at 105 °C | max 13.7 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, peripherals enabled; typical only; maximum line is split | typ 19.2 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, peripherals enabled; max at 25 °C | max 21.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, peripherals enabled; max at 85 °C | max 22 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, peripherals enabled; max at 105 °C | max 22.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, peripherals disabled; max at 25 °C | typ 11.7 · max 13.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, peripherals disabled; max at 85 °C | max 13.5 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, peripherals disabled; max at 105 °C | max 13.7 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, peripherals enabled; max at 25 °C | typ 13.4 · max 15.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, peripherals enabled; max at 85 °C | max 15.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, peripherals enabled; max at 105 °C | max 16 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, peripherals disabled; max at 25 °C | typ 7.9 · max 8.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, peripherals disabled; max at 85 °C | max 8.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, peripherals disabled; max at 105 °C | max 9.7 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, peripherals enabled; max at 25 °C | typ 10.3 · max 12.6 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, peripherals enabled; max at 85 °C | max 13 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, peripherals enabled; max at 105 °C | max 13.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, peripherals disabled; max at 25 °C | typ 6.2 · max 8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, peripherals disabled; max at 85 °C | max 8.2 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, peripherals disabled; max at 105 °C | max 8.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, peripherals enabled; max at 25 °C | typ 3.6 · max 4.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, peripherals enabled; max at 85 °C | max 4.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, peripherals enabled; max at 105 °C | max 4.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, peripherals disabled; max at 25 °C | typ 2 · max 2.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, peripherals disabled; max at 85 °C | max 2.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, peripherals disabled; max at 105 °C | max 2.5 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, peripherals enabled; max at 25 °C | typ 0.8 · max 0.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, peripherals enabled; max at 85 °C | max 0.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, peripherals enabled; max at 105 °C | max 1.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, peripherals disabled; max at 25 °C | typ 0.4 · max 0.5 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, peripherals disabled; max at 85 °C | max 0.6 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, peripherals disabled; max at 105 °C | max 0.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, peripherals enabled; max at 25 °C | typ 19.5 · max 22 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, peripherals enabled; max at 85 °C | max 22.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, peripherals enabled; max at 105 °C | max 22.5 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, peripherals disabled; max at 25 °C | typ 11.8 · max 13.6 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, peripherals disabled; max at 85 °C | max 13.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, peripherals disabled; max at 105 °C | max 13.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, peripherals enabled; max at 25 °C | typ 13.5 · max 16.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, peripherals enabled; max at 85 °C | max 16.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, peripherals enabled; max at 105 °C | max 16.6 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, peripherals disabled; max at 25 °C | typ 8 · max 8.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, peripherals disabled; max at 85 °C | max 9.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, peripherals disabled; max at 105 °C | max 9.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, peripherals enabled; max at 25 °C | typ 10.5 · max 12.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, peripherals enabled; max at 85 °C | max 13 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, peripherals enabled; max at 105 °C | max 13.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, peripherals disabled; max at 25 °C | typ 6.5 · max 8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, peripherals disabled; max at 85 °C | max 8.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, peripherals disabled; max at 105 °C | max 8.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, peripherals enabled; max at 25 °C | typ 3.7 · max 4.7 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, peripherals enabled; max at 85 °C | max 5 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, peripherals enabled; max at 105 °C | max 5.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, peripherals disabled; max at 25 °C | typ 2.1 · max 2.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, peripherals disabled; max at 85 °C | max 2.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, peripherals disabled; max at 105 °C | max 3 mA | 51 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, peripherals enabled; max at 25 °C | typ 12.4 · max 15.1 mA | 51 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, peripherals enabled; max at 85 °C | max 16.3 mA | 51 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, peripherals enabled; max at 105 °C | max 16.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, peripherals disabled; max at 25 °C | typ 3 · max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, peripherals disabled; max at 85 °C | max 3.3 mA | 51 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, peripherals disabled; max at 105 °C | max 3.4 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, peripherals enabled; max at 25 °C | typ 12.3 · max 15 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, peripherals enabled; max at 85 °C | max 16 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, peripherals enabled; max at 105 °C | max 16.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, peripherals disabled; max at 25 °C | typ 2.9 · max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, peripherals disabled; max at 85 °C | max 3.3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, peripherals disabled; max at 105 °C | max 3.4 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, peripherals enabled; max at 25 °C | typ 8.5 · max 10.6 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, peripherals enabled; max at 85 °C | max 11.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, peripherals enabled; max at 105 °C | max 11.7 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, peripherals disabled; max at 25 °C | typ 1.9 · max 2.1 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, peripherals disabled; max at 85 °C | max 2.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, peripherals disabled; max at 105 °C | max 2.5 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, peripherals enabled; max at 25 °C | typ 6.5 · max 8.1 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, peripherals enabled; max at 85 °C | max 8.5 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, peripherals enabled; max at 105 °C | max 8.7 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, peripherals disabled; max at 25 °C | typ 1.6 · max 1.8 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, peripherals disabled; max at 85 °C | max 1.8 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, peripherals disabled; max at 105 °C | max 1.9 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, peripherals enabled; max at 25 °C | typ 2.3 · max 3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, peripherals enabled; max at 85 °C | max 3.1 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, peripherals enabled; max at 105 °C | max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, peripherals disabled; max at 25 °C | typ 0.7 · max 0.8 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, peripherals disabled; max at 85 °C | max 0.8 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, peripherals disabled; max at 105 °C | max 0.9 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, peripherals enabled; max at 25 °C | typ 0.4 · max 0.4 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, peripherals enabled; max at 85 °C | max 0.4 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, peripherals enabled; max at 105 °C | max 0.6 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, peripherals disabled; max at 25 °C | typ 0.1 · max 0.3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, peripherals disabled; max at 85 °C | max 0.3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, peripherals disabled; max at 105 °C | max 0.4 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, peripherals enabled; max at 25 °C | typ 12.4 · max 15.3 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, peripherals enabled; max at 85 °C | max 15.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, peripherals enabled; max at 105 °C | max 15.9 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, peripherals disabled; max at 25 °C | typ 3 · max 3 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, peripherals disabled; max at 85 °C | max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, peripherals disabled; max at 105 °C | max 3.4 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, peripherals enabled; max at 25 °C | typ 8.6 · max 10.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, peripherals enabled; max at 85 °C | max 11.3 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, peripherals enabled; max at 105 °C | max 11.6 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, peripherals disabled; max at 25 °C | typ 2.1 · max 2.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, peripherals disabled; max at 85 °C | max 2.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, peripherals disabled; max at 105 °C | max 2.5 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, peripherals enabled; max at 25 °C | typ 6.6 · max 8.4 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, peripherals enabled; max at 85 °C | max 8.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, peripherals enabled; max at 105 °C | max 8.9 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, peripherals disabled; max at 25 °C | typ 1.6 · max 1.6 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, peripherals disabled; max at 85 °C | max 1.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, peripherals disabled; max at 105 °C | max 1.9 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, peripherals enabled; max at 25 °C | typ 2.4 · max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, peripherals enabled; max at 85 °C | max 3.4 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, peripherals enabled; max at 105 °C | max 3.6 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, peripherals disabled; max at 25 °C | typ 0.6 · max 0.8 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, peripherals disabled; max at 85 °C | max 0.9 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, peripherals disabled; max at 105 °C | max 1 mA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 2.4 V; max at 25 °C | typ 309 · max 325 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 2.4 V; max at 85 °C | max 332 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 2.4 V; max at 105 °C | max 342 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 3.6 V; max at 25 °C | typ 317 · max 334 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 3.6 V; max at 85 °C | max 338 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 3.6 V; max at 105 °C | max 344 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 2.4 V; max at 25 °C | typ 148 · max 167 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 2.4 V; max at 85 °C | max 176 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 2.4 V; max at 105 °C | max 179 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 3.6 V; max at 25 °C | typ 161 · max 181 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 3.6 V; max at 85 °C | max 193 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 3.6 V; max at 105 °C | max 197 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 2.4 V; max at 25 °C | typ 102 · max 119 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 2.4 V; max at 85 °C | max 124 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 2.4 V; max at 105 °C | max 126 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 3.6 V; max at 25 °C | typ 111 · max 128 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 3.6 V; max at 85 °C | max 135 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 3.6 V; max at 105 °C | max 137 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 2.4 V; max at 25 °C | typ 80 · max 95 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 2.4 V; max at 85 °C | max 99 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 2.4 V; max at 105 °C | max 100 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 3.6 V; max at 25 °C | typ 88 · max 102 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 3.6 V; max at 85 °C | max 106 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 3.6 V; max at 105 °C | max 108 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 2.4 V; max at 25 °C | typ 2.7 · max 3.7 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 2.4 V; max at 85 °C | max 4.2 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 2.4 V; max at 105 °C | max 4.5 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 3.6 V; max at 25 °C | typ 3.5 · max 4.7 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 3.6 V; max at 85 °C | max 5.2 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 3.6 V; max at 105 °C | max 5.5 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 2.4 V; max at 25 °C | typ 2.7 · max 3.7 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 2.4 V; max at 85 °C | max 4.2 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 2.4 V; max at 105 °C | max 4.2 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 3.6 V; max at 25 °C | typ 3.6 · max 4.7 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 3.6 V; max at 85 °C | max 5.2 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 3.6 V; max at 105 °C | max 5.5 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 2.4 V; max at 25 °C | typ 220 · max 242 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 2.4 V; max at 85 °C | max 251 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 2.4 V; max at 105 °C | max 254 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 3.6 V; max at 25 °C | typ 242 · max 264 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 3.6 V; max at 85 °C | max 275 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 3.6 V; max at 105 °C | max 279 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 2.4 V; max at 25 °C | typ 173 · max 193 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 2.4 V; max at 85 °C | max 200 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 2.4 V; max at 105 °C | max 202 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 3.6 V; max at 25 °C | typ 191 · max 211 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 3.6 V; max at 85 °C | max 219 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 3.6 V; max at 105 °C | max 221 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 2.4 V; max at 25 °C | typ 151 · max 169 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 2.4 V; max at 85 °C | max 175 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 2.4 V; max at 105 °C | max 177 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 3.6 V; max at 25 °C | typ 167 · max 184 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 3.6 V; max at 85 °C | max 191 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 3.6 V; max at 105 °C | max 193 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 2.4 V; max at 25 °C | typ 72 · max 82 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 2.4 V; max at 85 °C | max 85 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 2.4 V; max at 105 °C | max 85 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 3.6 V; max at 25 °C | typ 82 · max 92 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 3.6 V; max at 85 °C | max 95 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 3.6 V; max at 105 °C | max 95 uA | 52 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 14.3 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 14.5 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 14.6 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 14.7 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 14.8 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V, typical | typ 14.9 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; TA = 25 °C | max 21 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; TA = 85 °C | max 47 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; TA = 105 °C | max 64 uA | 53 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 2.9 uA | 53 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 3.1 uA | 53 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 3.2 uA | 53 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 3.3 uA | 53 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 3.4 uA | 53 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 3.5 uA | 53 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; TA = 25 °C | max 6.5 uA | 53 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; TA = 85 °C | max 32 uA | 53 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; TA = 105 °C | max 44 uA | 53 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 0.8 uA | 53 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 0.9 uA | 53 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 1.1 uA | 53 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 1.2 uA | 53 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 1.3 uA | 53 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 1.5 uA | 53 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 0.6 uA | 53 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 0.7 uA | 53 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 0.8 uA | 53 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 0.9 uA | 53 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 1 uA | 53 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 1.1 uA | 53 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 25 °C | max 2 uA | 53 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 85 °C | max 2.5 uA | 53 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 105 °C | max 3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 2 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 2.1 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 2.2 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 2.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 2.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 2.7 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; TA = 25 °C | max 3.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; TA = 85 °C | max 3.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; TA = 105 °C | max 4.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 2 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 2.1 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 2.2 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 2.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 2.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 2.7 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; TA = 25 °C | max 3.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; TA = 85 °C | max 3.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; TA = 105 °C | max 4.5 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 2.4 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 2.6 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 2.8 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 3 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 3.1 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 3.4 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 1.9 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 2 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 2.1 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 2.3 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 2.4 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 2.5 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; TA = 25 °C | max 3.4 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; TA = 85 °C | max 3.5 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; TA = 105 °C | max 4.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 1.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 1.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 1.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 1.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 1.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 1.5 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 1.7 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 1.8 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 1.8 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 2 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 2.1 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 2.2 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 1.1 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 1.2 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 1.2 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 1.3 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 1.3 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 1.4 uA | 53 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | TA = +25 °C, conforming to JESD22-A114; all packages, class 2 | max 2000 V | 71 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | TA = +25 °C, conforming to ANSI/ESD STM5.3.1; all packages, class C4 | max 500 V | 71 |
| Thermal resistance junction-ambient ΘJA | UFQFPN28 - 4 mm x 4 mm; table value | typ 118 °C/W | 111 |
| External main supply voltage VDD–VSS | Absolute maximum ratings | min -0.3 · max 4 V | 45 |
| External I/O supply voltage VDDIO2–VSS | Absolute maximum ratings | min -0.3 · max 4 V | 45 |
| External analog supply voltage VDDA–VSS | Absolute maximum ratings | min -0.3 · max 4 V | 45 |
| Allowed voltage difference for VDD > VDDA VDD–VDDA | Absolute maximum ratings | max 0.4 V | 45 |
| External backup supply voltage VBAT–VSS | Absolute maximum ratings | min -0.3 · max 4 V | 45 |
| Input voltage on TTa pins VIN | Minimum VSS - 0.3 V | max 4 V | 45 |
| Input voltage on any other pin VIN | Minimum VSS - 0.3 V | max 4 V | 45 |
| Variations between different VDD power pins |∆VDDx| | Absolute maximum ratings | max 50 mV | 45 |
| Variations between all the different ground pins |VSSx - VSS| | Absolute maximum ratings | max 50 mV | 45 |
| Total current into sum of all VDD power lines (source) ΣIVDD | Absolute maximum ratings | max 120 mA | 46 |
| Total current out of sum of all VSS ground lines (sink) ΣIVSS | Absolute maximum ratings | max -120 mA | 46 |
| Maximum current into each VDD power pin (source) IVDD(PIN) | Absolute maximum ratings | max 100 mA | 46 |
| Maximum current out of each VSS ground pin (sink) IVSS(PIN) | Absolute maximum ratings | max -100 mA | 46 |
| Output current sunk by any I/O and control pin IIO(PIN) | Absolute maximum ratings | max 25 mA | 46 |
| Output current source by any I/O and control pin IIO(PIN) | Absolute maximum ratings | max -25 mA | 46 |
| Total output current sunk by sum of all I/Os and control pins ΣIIO(PIN) | Absolute maximum ratings | max 80 mA | 46 |
| Total output current sourced by sum of all I/Os and control pins ΣIIO(PIN) | Absolute maximum ratings | max -80 mA | 46 |
| Total output current sourced by sum of all I/Os supplied by VDDIO2 ΣIIO(PIN) | Absolute maximum ratings | max -40 mA | 46 |
| Injected current on TC and RST pin IINJ(PIN) | Absolute maximum ratings; printed limit ±5 | max 5 mA | 46 |
| Injected current on TTa pins IINJ(PIN) | Absolute maximum ratings; printed limit ±5 | max 5 mA | 46 |
| Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) | Absolute maximum ratings; printed limit ±25; absolute sum of positive and negative injected currents | max 25 mA | 46 |
| Storage temperature range TSTG | Absolute maximum ratings | min -65 · max 150 °C | 46 |
| Maximum junction temperature TJ | Absolute maximum ratings | max 150 °C | 46 |
| Analog operating voltage (ADC not used) VDDA | Minimum VDD; must have a potential equal to or higher than VDD | max 3.6 V | 47 |
| Analog operating voltage (ADC used) VDDA | Must have a potential equal to or higher than VDD | min 2.4 · max 3.6 V | 47 |
| Backup operating voltage VBAT | min 1.65 · max 3.6 V | 47 | |
| I/O input voltage VIN | TC and RST I/O; maximum VDDIOx+0.3 V | min -0.3 V | 47 |
| I/O input voltage VIN | TTa I/O; maximum VDDA+0.3 V; internal pull-up must be disabled above VDDIOx+0.3 V | min -0.3 V | 47 |
| I/O input voltage VIN | FT and FTf I/O; internal pull-up must be disabled above VDDIOx+0.3 V | min -0.3 · max 5.5 V | 47 |
| PVD hysteresis VPVDhyst | Guaranteed by design, not tested in production | typ 100 mV | 49 |
| PVD current consumption IDD(PVD) | Maximum guaranteed by design, not tested in production | typ 0.15 · max 0.26 uA | 49 |
| ADC_IN17 buffer startup time tSTART | Guaranteed by design, not tested in production | max 10 us | 49 |
| ADC sampling time when reading the internal reference voltage tS_vrefint | Guaranteed by design, not tested in production | min 4 us | 49 |
| Internal reference voltage spread over the temperature range ∆VREFINT | VDDA = 3 V; guaranteed by design, not tested in production | max 10 mV | 49 |
| Temperature coefficient TCoeff | Guaranteed by design, not tested in production | min -100 · max 100 ppm/°C | 49 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals enabled except USB; maximum at TA = 25 °C | typ 20.3 · max 23.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals enabled except USB; maximum at TA = 85 °C | max 23.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals enabled except USB; maximum at TA = 105 °C | max 24.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 12.7 · max 14.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals disabled; maximum at TA = 85 °C | max 14.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz; all peripherals disabled; maximum at TA = 105 °C | max 14.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled except USB; maximum at TA = 25 °C | typ 20.2 · max 22.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled except USB; maximum at TA = 85 °C | max 23 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled except USB; maximum at TA = 105 °C | max 23.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 12.6 · max 14.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; maximum at TA = 85 °C | max 14.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; maximum at TA = 105 °C | max 14.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled except USB; maximum at TA = 25 °C | typ 14 · max 16 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled except USB; maximum at TA = 85 °C | max 16.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled except USB; maximum at TA = 105 °C | max 16.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 8.7 · max 9.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; maximum at TA = 85 °C | max 9.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; maximum at TA = 105 °C | max 10.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled except USB; maximum at TA = 25 °C | typ 11 · max 13.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled except USB; maximum at TA = 85 °C | max 13.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled except USB; maximum at TA = 105 °C | max 13.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 6.9 · max 7.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; maximum at TA = 85 °C | max 7.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; maximum at TA = 105 °C | max 8.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled except USB; maximum at TA = 25 °C | typ 3.9 · max 5.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled except USB; maximum at TA = 85 °C | max 5.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled except USB; maximum at TA = 105 °C | max 5.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 2.6 · max 3.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; maximum at TA = 85 °C | max 3.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; maximum at TA = 105 °C | max 3.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled except USB; maximum at TA = 25 °C | typ 0.9 · max 1.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled except USB; maximum at TA = 85 °C | max 1.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled except USB; maximum at TA = 105 °C | max 1.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 0.7 · max 1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; maximum at TA = 85 °C | max 1.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; maximum at TA = 105 °C | max 1.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled except USB; maximum at TA = 25 °C | typ 20.5 · max 23.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled except USB; maximum at TA = 85 °C | max 23.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled except USB; maximum at TA = 105 °C | max 23.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 12.8 · max 14.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; maximum at TA = 85 °C | max 14.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; maximum at TA = 105 °C | max 15 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled except USB; maximum at TA = 25 °C | typ 14.3 · max 15.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled except USB; maximum at TA = 85 °C | max 15.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled except USB; maximum at TA = 105 °C | max 17 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 8.6 · max 9.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; maximum at TA = 85 °C | max 9.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; maximum at TA = 105 °C | max 10 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled except USB; maximum at TA = 25 °C | typ 11.2 · max 13.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled except USB; maximum at TA = 85 °C | max 13.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled except USB; maximum at TA = 105 °C | max 14.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 6.9 · max 7.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; maximum at TA = 85 °C | max 7.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; maximum at TA = 105 °C | max 7.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled except USB; maximum at TA = 25 °C | typ 4.1 · max 5.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled except USB; maximum at TA = 85 °C | max 5.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled except USB; maximum at TA = 105 °C | max 5.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 2.6 · max 3.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; maximum at TA = 85 °C | max 3.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; maximum at TA = 105 °C | max 3.3 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz; all peripherals enabled except USB; max at 25 °C | typ 19.3 · max 21.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz; all peripherals enabled except USB; max at 85 °C | max 22.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz; all peripherals enabled except USB; max at 105 °C | max 23.7 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz; all peripherals disabled; max at 25 °C | typ 11.9 · max 13.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz; all peripherals disabled; max at 85 °C | max 13.6 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz; all peripherals disabled; max at 105 °C | max 13.7 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled except USB; max at 25 °C | typ 19.2 · max 21.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled except USB; max at 85 °C | max 22 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled except USB; max at 105 °C | max 22.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; max at 25 °C | typ 11.7 · max 13.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; max at 85 °C | max 13.5 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; max at 105 °C | max 13.7 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled except USB; max at 25 °C | typ 13.4 · max 15.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled except USB; max at 85 °C | max 15.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled except USB; max at 105 °C | max 16 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; max at 25 °C | typ 7.9 · max 8.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; max at 85 °C | max 8.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; max at 105 °C | max 9.7 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled except USB; max at 25 °C | typ 10.3 · max 12.6 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled except USB; max at 85 °C | max 13 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled except USB; max at 105 °C | max 13.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; max at 25 °C | typ 6.2 · max 8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; max at 85 °C | max 8.2 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; max at 105 °C | max 8.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled except USB; max at 25 °C | typ 3.6 · max 4.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled except USB; max at 85 °C | max 4.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled except USB; max at 105 °C | max 4.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; max at 25 °C | typ 2 · max 2.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; max at 85 °C | max 2.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; max at 105 °C | max 2.5 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled except USB; max at 25 °C | typ 0.8 · max 0.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled except USB; max at 85 °C | max 0.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled except USB; max at 105 °C | max 1.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; max at 25 °C | typ 0.4 · max 0.5 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; max at 85 °C | max 0.6 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; max at 105 °C | max 0.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled except USB; max at 25 °C | typ 19.5 · max 22 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled except USB; max at 85 °C | max 22.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled except USB; max at 105 °C | max 22.5 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; max at 25 °C | typ 11.8 · max 13.6 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; max at 85 °C | max 13.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; max at 105 °C | max 13.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled except USB; max at 25 °C | typ 13.5 · max 16.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled except USB; max at 85 °C | max 16.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled except USB; max at 105 °C | max 16.6 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; max at 25 °C | typ 8 · max 8.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; max at 85 °C | max 9.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; max at 105 °C | max 9.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled except USB; max at 25 °C | typ 10.5 · max 12.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled except USB; max at 85 °C | max 13 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled except USB; max at 105 °C | max 13.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; max at 25 °C | typ 6.5 · max 8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; max at 85 °C | max 8.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; max at 105 °C | max 8.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled except USB; max at 25 °C | typ 3.7 · max 4.7 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled except USB; max at 85 °C | max 5 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled except USB; max at 105 °C | max 5.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; max at 25 °C | typ 2.1 · max 2.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; max at 85 °C | max 2.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; max at 105 °C | max 3 mA | 51 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz; all peripherals enabled except USB; max at 25 °C | typ 12.4 · max 15.1 mA | 51 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz; all peripherals enabled except USB; max at 85 °C | max 16.3 mA | 51 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz; all peripherals enabled except USB; max at 105 °C | max 16.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz; all peripherals disabled; max at 25 °C | typ 3 · max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz; all peripherals disabled; max at 85 °C | max 3.3 mA | 51 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz; all peripherals disabled; max at 105 °C | max 3.4 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled except USB; max at 25 °C | typ 12.3 · max 15 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled except USB; max at 85 °C | max 16 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz; all peripherals enabled except USB; max at 105 °C | max 16.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; max at 25 °C | typ 2.9 · max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; max at 85 °C | max 3.3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz; all peripherals disabled; max at 105 °C | max 3.4 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled except USB; max at 25 °C | typ 8.5 · max 10.6 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled except USB; max at 85 °C | max 11.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz; all peripherals enabled except USB; max at 105 °C | max 11.7 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; max at 25 °C | typ 1.9 · max 2.1 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; max at 85 °C | max 2.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz; all peripherals disabled; max at 105 °C | max 2.5 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled except USB; max at 25 °C | typ 6.5 · max 8.1 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled except USB; max at 85 °C | max 8.5 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz; all peripherals enabled except USB; max at 105 °C | max 8.7 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; max at 25 °C | typ 1.6 · max 1.8 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; max at 85 °C | max 1.8 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz; all peripherals disabled; max at 105 °C | max 1.9 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled except USB; max at 25 °C | typ 2.3 · max 3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled except USB; max at 85 °C | max 3.1 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz; all peripherals enabled except USB; max at 105 °C | max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; max at 25 °C | typ 0.7 · max 0.8 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; max at 85 °C | max 0.8 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz; all peripherals disabled; max at 105 °C | max 0.9 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled except USB; max at 25 °C | typ 0.4 · max 0.4 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled except USB; max at 85 °C | max 0.4 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz; all peripherals enabled except USB; max at 105 °C | max 0.6 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; max at 25 °C | typ 0.1 · max 0.3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; max at 85 °C | max 0.3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz; all peripherals disabled; max at 105 °C | max 0.4 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled except USB; max at 25 °C | typ 12.4 · max 15.3 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled except USB; max at 85 °C | max 15.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals enabled except USB; max at 105 °C | max 15.9 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; max at 25 °C | typ 3 · max 3 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; max at 85 °C | max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz; all peripherals disabled; max at 105 °C | max 3.4 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled except USB; max at 25 °C | typ 8.6 · max 10.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled except USB; max at 85 °C | max 11.3 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz; all peripherals enabled except USB; max at 105 °C | max 11.6 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; max at 25 °C | typ 2.1 · max 2.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; max at 85 °C | max 2.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz; all peripherals disabled; max at 105 °C | max 2.5 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled except USB; max at 25 °C | typ 6.6 · max 8.4 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled except USB; max at 85 °C | max 8.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz; all peripherals enabled except USB; max at 105 °C | max 8.9 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; max at 25 °C | typ 1.6 · max 1.6 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; max at 85 °C | max 1.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz; all peripherals disabled; max at 105 °C | max 1.9 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled except USB; max at 25 °C | typ 2.4 · max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled except USB; max at 85 °C | max 3.4 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz; all peripherals enabled except USB; max at 105 °C | max 3.6 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; max at 25 °C | typ 0.6 · max 0.8 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; max at 85 °C | max 0.9 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz; all peripherals disabled; max at 105 °C | max 1 mA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 2.4 V; max at 25 °C | typ 173 · max 193 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 2.4 V; max at 85 °C | max 200 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 2.4 V; max at 105 °C | max 202 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 3.6 V; max at 25 °C | typ 191 · max 211 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 3.6 V; max at 85 °C | max 219 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 3.6 V; max at 105 °C | max 221 uA | 52 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 14.3 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 14.5 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 14.6 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 14.7 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 14.8 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 14.9 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; TA = 25 °C | max 21 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; TA = 85 °C | max 47 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; TA = 105 °C | max 64 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 2 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 2.1 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 2.2 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 2.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 2.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 2.7 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 25 °C | max 3.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 85 °C | max 3.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 105 °C | max 4.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 2 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 2.1 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 2.2 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 2.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 2.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 2.7 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 25 °C | max 3.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 85 °C | max 3.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 105 °C | max 4.5 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 2.4 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 2.6 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 2.8 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 3 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 3.1 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 3.4 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 1.9 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 2 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 2.1 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 2.3 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 2.4 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 2.5 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 25 °C | max 3.4 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 85 °C | max 3.5 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 105 °C | max 4.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 1.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 1.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 1.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 1.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 1.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 1.5 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 1.7 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 1.8 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 1.8 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 2 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 2.1 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 2.2 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 1.1 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 1.2 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 1.2 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 1.3 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 1.3 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 1.4 uA | 53 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; VBAT = 1.65 V | typ 0.5 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; VBAT = 1.8 V | typ 0.5 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; VBAT = 2.4 V | typ 0.6 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; VBAT = 2.7 V | typ 0.7 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; VBAT = 3.3 V | typ 0.9 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; VBAT = 3.6 V | typ 1.1 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; TA = 25 °C | max 1.2 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; TA = 85 °C | max 1.5 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; TA = 105 °C | max 2 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; VBAT = 1.65 V | typ 0.8 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; VBAT = 1.8 V | typ 0.9 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; VBAT = 2.4 V | typ 1.1 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; VBAT = 2.7 V | typ 1.2 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; VBAT = 3.3 V | typ 1.4 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; VBAT = 3.6 V | typ 1.5 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; TA = 25 °C | max 1.6 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; TA = 85 °C | max 2 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; TA = 105 °C | max 2.6 uA | 54 |
| Current consumption from VDD supply IDD | 48 MHz; Run mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 20.7 mA | 55 |
| Current consumption from VDD supply IDD | 48 MHz; Run mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 12.8 mA | 55 |
| Current consumption from VDD supply IDD | 48 MHz; Sleep mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 12.3 mA | 55 |
| Current consumption from VDD supply IDD | 48 MHz; Sleep mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 3.4 mA | 55 |
| Current consumption from VDD supply IDD | 36 MHz; Run mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 15.9 mA | 55 |
| Current consumption from VDD supply IDD | 36 MHz; Run mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 9.9 mA | 55 |
| Current consumption from VDD supply IDD | 36 MHz; Sleep mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 9.5 mA | 55 |
| Current consumption from VDD supply IDD | 36 MHz; Sleep mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 2.7 mA | 55 |
| Current consumption from VDD supply IDD | 32 MHz; Run mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 14.3 mA | 55 |
| Current consumption from VDD supply IDD | 32 MHz; Run mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 9 mA | 55 |
| Current consumption from VDD supply IDD | 32 MHz; Sleep mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 8.5 mA | 55 |
| Current consumption from VDD supply IDD | 32 MHz; Sleep mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 2.5 mA | 55 |
| Current consumption from VDD supply IDD | 24 MHz; Run mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 11 mA | 55 |
| Current consumption from VDD supply IDD | 24 MHz; Run mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 7.1 mA | 55 |
| Current consumption from VDD supply IDD | 24 MHz; Sleep mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 6.6 mA | 55 |
| Current consumption from VDD supply IDD | 24 MHz; Sleep mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 2.1 mA | 55 |
| Current consumption from VDD supply IDD | 16 MHz; Run mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 7.7 mA | 55 |
| Current consumption from VDD supply IDD | 16 MHz; Run mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 5 mA | 55 |
| Current consumption from VDD supply IDD | 16 MHz; Sleep mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 4.7 mA | 55 |
| Current consumption from VDD supply IDD | 16 MHz; Sleep mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 1.6 mA | 55 |
| Current consumption from VDD supply IDD | 8 MHz; Run mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 4.3 mA | 55 |
| Current consumption from VDD supply IDD | 8 MHz; Run mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 3 mA | 55 |
| Current consumption from VDD supply IDD | 8 MHz; Sleep mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 2.7 mA | 55 |
| Current consumption from VDD supply IDD | 8 MHz; Sleep mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 1.2 mA | 55 |
| Current consumption from VDD supply IDD | 4 MHz; Run mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 2.6 mA | 55 |
| Current consumption from VDD supply IDD | 4 MHz; Run mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 2 mA | 55 |
| Current consumption from VDD supply IDD | 4 MHz; Sleep mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 1.7 mA | 55 |
| Current consumption from VDD supply IDD | 4 MHz; Sleep mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 0.9 mA | 55 |
| Current consumption from VDD supply IDD | 2 MHz; Run mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 1.8 mA | 55 |
| Current consumption from VDD supply IDD | 2 MHz; Run mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 1.5 mA | 55 |
| Current consumption from VDD supply IDD | 2 MHz; Sleep mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 1.2 mA | 55 |
| Current consumption from VDD supply IDD | 2 MHz; Sleep mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 0.8 mA | 55 |
| Current consumption from VDD supply IDD | 1 MHz; Run mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 1.4 mA | 55 |
| Current consumption from VDD supply IDD | 1 MHz; Run mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 1.2 mA | 55 |
| Current consumption from VDD supply IDD | 1 MHz; Sleep mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 1 mA | 55 |
| Current consumption from VDD supply IDD | 1 MHz; Sleep mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 0.8 mA | 55 |
| Current consumption from VDD supply IDD | 500 kHz; Run mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 1.2 mA | 55 |
| Current consumption from VDD supply IDD | 500 kHz; Run mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 1.1 mA | 55 |
| Current consumption from VDD supply IDD | 500 kHz; Sleep mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 0.8 mA | 55 |
| Current consumption from VDD supply IDD | 500 kHz; Sleep mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 0.7 mA | 55 |
| Current consumption from VDDA supply IDDA | 48 MHz; Run and Sleep modes; peripherals enabled or disabled; VDD = VDDA = 3.3 V | typ 163.3 uA | 55 |
| Current consumption from VDDA supply IDDA | 36 MHz; Run and Sleep modes; peripherals enabled or disabled; VDD = VDDA = 3.3 V | typ 124.3 uA | 55 |
| Current consumption from VDDA supply IDDA | 32 MHz; Run and Sleep modes; peripherals enabled or disabled; VDD = VDDA = 3.3 V | typ 111.9 uA | 55 |
| Current consumption from VDDA supply IDDA | 24 MHz; Run and Sleep modes; peripherals enabled or disabled; VDD = VDDA = 3.3 V | typ 87.1 uA | 55 |
| Current consumption from VDDA supply IDDA | 16 MHz; Run and Sleep modes; peripherals enabled or disabled; VDD = VDDA = 3.3 V | typ 62.5 uA | 55 |
| Current consumption from VDDA supply IDDA | 8 MHz; Run and Sleep modes; peripherals enabled or disabled; VDD = VDDA = 3.3 V | typ 2.5 uA | 55 |
| Current consumption from VDDA supply IDDA | 4 MHz; Run and Sleep modes; peripherals enabled or disabled; VDD = VDDA = 3.3 V | typ 2.5 uA | 55 |
| Current consumption from VDDA supply IDDA | 2 MHz; Run and Sleep modes; peripherals enabled or disabled; VDD = VDDA = 3.3 V | typ 2.5 uA | 55 |
| Current consumption from VDDA supply IDDA | 1 MHz; Run and Sleep modes; peripherals enabled or disabled; VDD = VDDA = 3.3 V | typ 2.5 uA | 55 |
| Current consumption from VDDA supply IDDA | 500 kHz; Run and Sleep modes; peripherals enabled or disabled; VDD = VDDA = 3.3 V | typ 2.5 uA | 55 |
| BusMatrix | AHB; 25 °C; automatically active when at least one master is ON | typ 2.2 uA/MHz | 58 |
| CRC | AHB; 25 °C | typ 1.9 uA/MHz | 58 |
| DMA | AHB; 25 °C | typ 5.1 uA/MHz | 58 |
| Flash memory interface | AHB; 25 °C | typ 15 uA/MHz | 58 |
| GPIOA | AHB; 25 °C | typ 8.2 uA/MHz | 58 |
| GPIOB | AHB; 25 °C | typ 7.7 uA/MHz | 58 |
| GPIOC | AHB; 25 °C | typ 2.1 uA/MHz | 58 |
| GPIOF | AHB; 25 °C | typ 1.8 uA/MHz | 58 |
| SRAM | AHB; 25 °C | typ 1.1 uA/MHz | 58 |
| TSC | AHB; 25 °C | typ 4.9 uA/MHz | 58 |
| All AHB peripherals | 25 °C | typ 49.8 uA/MHz | 58 |
| APB-Bridge | APB; 25 °C; automatically active when at least one peripheral is ON on the Bus | typ 2.9 uA/MHz | 59 |
| ADC | APB; 25 °C; analog IDDA consumption excluded | typ 3.9 uA/MHz | 59 |
| CAN | APB; 25 °C | typ 12.9 uA/MHz | 59 |
| CEC | APB; 25 °C | typ 1.5 uA/MHz | 59 |
| CRS | APB; 25 °C | typ 1 uA/MHz | 59 |
| DBG (MCU Debug Support) | APB; 25 °C | typ 0.2 uA/MHz | 59 |
| I2C1 | APB; 25 °C | typ 3.6 uA/MHz | 59 |
| PWR | APB; 25 °C | typ 1.4 uA/MHz | 59 |
| SPI1 | APB; 25 °C | typ 8.5 uA/MHz | 59 |
| SPI2 | APB; 25 °C | typ 6.1 uA/MHz | 59 |
| SYSCFG | APB; 25 °C | typ 1.8 uA/MHz | 59 |
| TIM1 | APB; 25 °C | typ 15.1 uA/MHz | 59 |
| TIM2 | APB; 25 °C | typ 16.8 uA/MHz | 59 |
| TIM3 | APB; 25 °C | typ 11.7 uA/MHz | 59 |
| TIM14 | APB; 25 °C | typ 5.5 uA/MHz | 59 |
| TIM16 | APB; 25 °C | typ 7 uA/MHz | 59 |
| TIM17 | APB; 25 °C | typ 6.9 uA/MHz | 59 |
| USART1 | APB; 25 °C | typ 17.8 uA/MHz | 59 |
| USART2 | APB; 25 °C | typ 5.6 uA/MHz | 59 |
| USB | APB; 25 °C | typ 4.9 uA/MHz | 59 |
| WWDG | APB; 25 °C | typ 1.4 uA/MHz | 59 |
| All APB peripherals | 25 °C | typ 136.7 uA/MHz | 59 |
| Wakeup from Stop mode tWUSTOP | Regulator in run mode; VDD = VDDA = 2.0 V; WFE | typ 3.2 · max 5 us | 60 |
| Wakeup from Stop mode tWUSTOP | Regulator in run mode; VDD = VDDA = 2.4 V; WFE | typ 3.1 · max 5 us | 60 |
| Wakeup from Stop mode tWUSTOP | Regulator in run mode; VDD = VDDA = 2.7 V; WFE | typ 2.9 · max 5 us | 60 |
| Wakeup from Stop mode tWUSTOP | Regulator in run mode; VDD = VDDA = 3 V; WFE | typ 2.9 · max 5 us | 60 |
| Wakeup from Stop mode tWUSTOP | Regulator in run mode; VDD = VDDA = 3.3 V; WFE | typ 2.8 · max 5 us | 60 |
| Wakeup from Stop mode tWUSTOP | Regulator in low power mode; VDD = VDDA = 2.0 V; WFE | typ 7 · max 9 us | 60 |
| Wakeup from Stop mode tWUSTOP | Regulator in low power mode; VDD = VDDA = 2.4 V; WFE | typ 5.8 · max 9 us | 60 |
| Wakeup from Stop mode tWUSTOP | Regulator in low power mode; VDD = VDDA = 2.7 V; WFE | typ 5.2 · max 9 us | 60 |
| Wakeup from Stop mode tWUSTOP | Regulator in low power mode; VDD = VDDA = 3 V; WFE | typ 4.9 · max 9 us | 60 |
| Wakeup from Stop mode tWUSTOP | Regulator in low power mode; VDD = VDDA = 3.3 V; WFE | typ 4.6 · max 9 us | 60 |
| Wakeup from Standby mode tWUSTANDBY | VDD = VDDA = 2.0 V; WFE; WKUP1 wakeup | typ 60.4 us | 60 |
| Wakeup from Standby mode tWUSTANDBY | VDD = VDDA = 2.4 V; WFE; WKUP1 wakeup | typ 55.6 us | 60 |
| Wakeup from Standby mode tWUSTANDBY | VDD = VDDA = 2.7 V; WFE; WKUP1 wakeup | typ 53.5 us | 60 |
| Wakeup from Standby mode tWUSTANDBY | VDD = VDDA = 3 V; WFE; WKUP1 wakeup | typ 52 us | 60 |
| Wakeup from Standby mode tWUSTANDBY | VDD = VDDA = 3.3 V; WFE; WKUP1 wakeup | typ 51 us | 60 |
| Wakeup from Sleep mode tWUSLEEP | WFE; EXTI event wakeup | typ 4 SYSCLK cycles | 60 |
| User external clock source frequency fHSE_ext | HSE bypass mode | typ 8 · max 32 MHz | 60 |
| OSC_IN high or low time tw(HSEH), tw(HSEL) | HSE bypass mode | min 15 ns | 60 |
| OSC_IN rise or fall time tr(HSE), tf(HSE) | HSE bypass mode | max 20 ns | 60 |
| Oscillator frequency fOSC_IN | Crystal/ceramic resonator | min 4 · typ 8 · max 32 MHz | 62 |
| Feedback resistor RF | typ 200 kΩ | 62 | |
| HSE current consumption IDD | During startup; first 2/3 of tSU(HSE) | max 8.5 mA | 62 |
| HSE current consumption IDD | VDD = 3.3 V; Rm = 30 Ω; CL = 10 pF@8 MHz | typ 0.4 mA | 62 |
| HSE current consumption IDD | VDD = 3.3 V; Rm = 45 Ω; CL = 10 pF@8 MHz | typ 0.5 mA | 62 |
| HSE current consumption IDD | VDD = 3.3 V; Rm = 30 Ω; CL = 5 pF@32 MHz | typ 0.8 mA | 62 |
| HSE current consumption IDD | VDD = 3.3 V; Rm = 30 Ω; CL = 10 pF@32 MHz | typ 1 mA | 62 |
| HSE current consumption IDD | VDD = 3.3 V; Rm = 30 Ω; CL = 20 pF@32 MHz | typ 1.5 mA | 62 |
| Oscillator transconductance gm | Startup | min 10 mA/V | 62 |
| Startup time tSU(HSE) | VDD is stabilized; standard 8 MHz crystal resonator | typ 2 ms | 62 |
| LSE current consumption IDD | low drive capability | typ 0.5 · max 0.9 uA | 63 |
| LSE current consumption IDD | medium-low drive capability | max 1 uA | 63 |
| LSE current consumption IDD | medium-high drive capability | max 1.3 uA | 63 |
| LSE current consumption IDD | high drive capability | max 1.6 uA | 63 |
| Oscillator transconductance gm | low drive capability | min 5 uA/V | 63 |
| Oscillator transconductance gm | medium-low drive capability | min 8 uA/V | 63 |
| Oscillator transconductance gm | medium-high drive capability | min 15 uA/V | 63 |
| Oscillator transconductance gm | high drive capability | min 25 uA/V | 63 |
| Startup time tSU(LSE) | VDDIOx is stabilized | typ 2 s | 63 |
| Frequency fLSI | VDDA = 3.3 V; TA = –40 to 105 °C | min 30 · typ 40 · max 50 kHz | 68 |
| LSI oscillator startup time tsu(LSI) | VDDA = 3.3 V; TA = –40 to 105 °C | max 85 us | 68 |
| LSI oscillator power consumption IDDA(LSI) | VDDA = 3.3 V; TA = –40 to 105 °C | typ 0.75 · max 1.2 uA | 68 |
| PLL input clock fPLL_IN | Use appropriate multiplier factors compatible with fPLL_OUT | min 1 · typ 8 · max 24 MHz | 68 |
| PLL input clock duty cycle fPLL_IN | min 40 · max 60 % | 68 | |
| PLL multiplier output clock fPLL_OUT | min 16 · max 48 MHz | 68 | |
| PLL lock time tLOCK | max 200 us | 68 | |
| Cycle-to-cycle jitter JitterPLL | max 300 ps | 68 | |
| 16-bit programming time tprog | TA = - 40 to +105 °C | min 40 · typ 53.5 · max 60 us | 68 |
| Page (1 KB) erase time tERASE | TA = - 40 to +105 °C | min 20 · max 40 ms | 68 |
| Mass erase time tME | TA = - 40 to +105 °C | min 20 · max 40 ms | 68 |
| Supply current IDD | Write mode; TA = –40 to 105 °C | max 10 mA | 68 |
| Supply current IDD | Erase mode; TA = –40 to 105 °C | max 12 mA | 68 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | All packages; TA = +25 °C; conforming to JESD22-A114; Class 2 | max 2000 V | 71 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | All packages; TA = +25 °C; conforming to ANSI/ESD STM5.3.1; Class C4 | max 500 V | 71 |
| Output low level voltage for an I/O pin VOL | CMOS port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 75 |
| Output low level voltage for an I/O pin VOL | TTL port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 75 |
| Output high level voltage for an I/O pin VOH | TTL port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | min 2.4 V | 75 |
| Output low level voltage for an I/O pin VOL | |IIO| = 20 mA; VDDIOx ≥ 2.7 V | max 1.3 V | 75 |
| Output low level voltage for an I/O pin VOL | |IIO| = 6 mA; VDDIOx ≥ 2 V | max 0.4 V | 75 |
| Output low level voltage for an I/O pin VOL | |IIO| = 4 mA | max 0.4 V | 75 |
| Output low level voltage for an FTf I/O pin in Fm+ mode VOLFm+ | |IIO| = 20 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 75 |
| Output low level voltage for an FTf I/O pin in Fm+ mode VOLFm+ | |IIO| = 10 mA | max 0.4 V | 75 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx ≥ 2 V | max 2 MHz | 76 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx ≥ 2 V | max 125 ns | 76 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx ≥ 2 V | max 125 ns | 76 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx < 2 V | max 1 MHz | 76 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx < 2 V | max 125 ns | 76 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx < 2 V | max 125 ns | 76 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx ≥ 2 V | max 10 MHz | 76 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx ≥ 2 V | max 25 ns | 76 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx ≥ 2 V | max 25 ns | 76 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx < 2 V | max 4 MHz | 76 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx < 2 V | max 62.5 ns | 76 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx < 2 V | max 62.5 ns | 76 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF; VDDIOx ≥ 2.7 V | max 50 MHz | 76 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx ≥ 2.7 V | max 30 MHz | 76 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; 2 V ≤ VDDIOx < 2.7 V | max 20 MHz | 76 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx < 2 V | max 10 MHz | 76 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF; VDDIOx ≥ 2.7 V | max 5 ns | 76 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx ≥ 2.7 V | max 8 ns | 76 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; 2 V ≤ VDDIOx < 2.7 V | max 12 ns | 76 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx < 2 V | max 25 ns | 76 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF; VDDIOx ≥ 2.7 V | max 5 ns | 76 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx ≥ 2.7 V | max 8 ns | 76 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; 2 V ≤ VDDIOx < 2.7 V | max 12 ns | 76 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx < 2 V | max 25 ns | 76 |
| Maximum frequency fmax(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx ≥ 2 V | max 2 MHz | 77 |
| Output fall time tf(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx ≥ 2 V | max 12 ns | 77 |
| Output rise time tr(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx ≥ 2 V | max 34 ns | 77 |
| Maximum frequency fmax(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx < 2 V | max 0.5 MHz | 77 |
| Output fall time tf(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx < 2 V | max 16 ns | 77 |
| Output rise time tr(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx < 2 V | max 44 ns | 77 |
| Pulse width of external signals detected by the EXTI controller tEXTIpw | min 10 ns | 77 | |
| NRST Schmitt trigger voltage hysteresis Vhys(NRST) | typ 200 mV | 78 | |
| Weak pull-up equivalent resistor RPU | VIN = VSS | min 25 · typ 40 · max 55 kΩ | 78 |
| NRST input filtered pulse VF(NRST) | max 100 ns | 78 | |
| NRST input not filtered pulse VNF(NRST) | 2.7 < VDD < 3.6 | min 300 ns | 78 |
| NRST input not filtered pulse VNF(NRST) | 2.0 < VDD < 3.6 | min 500 ns | 78 |
| Analog supply voltage for ADC ON VDDA | ADC ON | min 2.4 · max 3.6 V | 78 |
| Current consumption of the ADC IDDA (ADC) | VDDA = 3.3 V | typ 0.9 mA | 78 |
| ADC clock frequency fADC | min 0.6 · max 14 MHz | 78 | |
| Sampling rate fS | 12-bit resolution | min 0.043 · max 1 MHz | 78 |
Pins, by the datasheet
28- 1 PB8-BOOT0
- Boot memory selection and GPIO; alternate functions I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC and CAN_RX. · p. 35
- 2 PF0-OSC_IN
- GPIO PF0, oscillator input, CRS_SYNC or I2C1_SDA. · p. 32
- 3 PF1-OSC_OUT
- GPIO PF1, oscillator output or I2C1_SCL. · p. 32
- 4 NRST
- Device reset input and internal reset output, active low. · p. 32
- 5 VDDA
- Analog power supply. · p. 32
- 6 PA0
- GPIO, USART2_CTS, TIM2_CH1_ETR, TSC_G1_IO1, RTC_TAMP2, WKUP1 or ADC_IN0. · p. 32
- 7 PA1
- GPIO, USART2_RTS, TIM2_CH2, TSC_G1_IO2, EVENTOUT or ADC_IN1. · p. 32
- 8 PA2
- GPIO, USART2_TX, TIM2_CH3, TSC_G1_IO3, ADC_IN2 or WKUP4. · p. 32
- 9 PA3
- GPIO, USART2_RX, TIM2_CH4, TSC_G1_IO4 or ADC_IN3. · p. 32
- 10 PA4
- GPIO, SPI1_NSS, I2S1_WS, TIM14_CH1, TSC_G2_IO1, USART2_CK, USB_NOE or ADC_IN4. · p. 33
- 11 PA5
- GPIO, SPI1_SCK, I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2 or ADC_IN5. · p. 33
- 12 PA6
- GPIO, SPI1_MISO, I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, TSC_G2_IO3, EVENTOUT or ADC_IN6. · p. 33
- 13 PA7
- GPIO, SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, TSC_G2_IO4, EVENTOUT or ADC_IN7. · p. 33
- 14 PB0
- GPIO, TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT or ADC_IN8. · p. 33
- 15 PB1
- GPIO, TIM3_CH4, TIM14_CH1, TIM1_CH3N, TSC_G3_IO3 or ADC_IN9. · p. 33
- 16 VSS
- Ground; the silicon VSSA pad connects to this VSS pin. · p. 33
- 17 VDD
- Digital power supply. · p. 33
- 18 VDDIO2
- Digital power supply for PA8 through PA15 I/Os. · p. 34
- 19 PA9
- GPIO, USART1_TX, TIM1_CH2, TSC_G4_IO1 or I2C1_SCL; PA11 can be remapped here for CAN_RX, USART1_CTS, TIM1_CH4, TSC_G4_IO3, EVENTOUT, I2C1_SCL or USB_DM. · p. 34
- 20 PA10
- GPIO, USART1_RX, TIM1_CH3, TIM17_BKIN, TSC_G4_IO2 or I2C1_SDA; PA12 can be remapped here for CAN_TX, USART1_RTS, TIM1_ETR, TSC_G4_IO4, EVENTOUT, I2C1_SDA or USB_DP. · p. 34
- 21 PA13
- GPIO, IR_OUT, SWDIO or USB_NOE; configured as SWDIO with internal pull-up after reset. · p. 34
- 22 PA14
- GPIO, USART2_TX or SWCLK; configured as SWCLK with internal pull-down after reset. · p. 34
- 23 PA15
- GPIO, SPI1_NSS, I2S1_WS, USART2_RX, TIM2_CH1_ETR, EVENTOUT or USB_NOE. · p. 35
- 24 PB3
- GPIO, SPI1_SCK, I2S1_CK, TIM2_CH2, TSC_G5_IO1 or EVENTOUT. · p. 35
- 25 PB4
- GPIO, SPI1_MISO, I2S1_MCK, TIM17_BKIN, TIM3_CH1, TSC_G5_IO2 or EVENTOUT. · p. 35
- 26 PB5
- GPIO, SPI1_MOSI, I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2 or WKUP6. · p. 35
- 27 PB6
- GPIO, I2C1_SCL, USART1_TX, TIM16_CH1N or TSC_G5_I03. · p. 35
- 28 PB7
- GPIO, I2C1_SDA, USART1_RX, TIM17_CH1N or TSC_G5_IO4. · p. 35
Open-source boards using it
6- 2 layers50 × 25 mm
Rx5808-receiver
msaribekyan/rx5808-receiver
RX5808 based 5.8 GHz analog video receiver module
39 parts3GPL-3.0 - 2 layers29.2 × 39.4 mm
- 2 layers50 × 25 mm
- 4 layers24.9 × 19.3 mm
- 2 layers50.8 × 69.9 mm
Parts like it
8
STM32G031G8U6
UFQFPN-28(4x4)-40℃~+85℃ 1.7V~3.6V 12bit 26 32 Bit 64KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH UFQFPN-28(4x4) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32F031G6U6
UFQFPN-28(4x4)-40℃~+85℃ 12bit 23 2V~3.6V 32 Bit 32KB 48MHz 4KB ARM Cortex-M0 Built-in FLASH UFQFPN-28(4x4) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32F042G6U6TR
UFQFN-28-40℃~+85℃ 1.65V~3.6V 12bit 24 32 Bit 32KB 48MHz 6KB ARM Cortex-M0 Built-in FLASH UFQFN-28 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32C031G6U6
UFQFPN-28(4x4)12bit 26 2V~3.6V 48MHz ARM Cortex-M0+ UFQFPN-28(4x4) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32G031G6U6
UFQFPN-28(4x4)-40℃~+85℃ 1.7V~3.6V 12bit 26 32 Bit 32KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH UFQFPN-28(4x4) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32C071GBU6
UFQFPN-28(4x4)Power-on reset (POR)、Power-down reset (PDR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Built-in general-purpose timer、Hardware CRC、Calendar function、Built-in temperature sensor、Hardware parity check、Independent watchdog (IWDG)、Window watchdog (WWDG) UFQFPN-28(4x4) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32F031G4U7
UFQFPN-28(4x4)-40℃~+105℃ 12bit 16KB 23 2V~3.6V 32 Bit 48MHz 4KB ARM Cortex-M0 Built-in FLASH UFQFPN-28(4x4) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32F048G6U6
UFQFPN-28(4x4)-40℃~+85℃ 1.65V~3.6V、1.65V~1.95V 12bit 23 32 Bit 32KB 48MHz 6KB ARM Cortex-M0 Built-in FLASH UFQFPN-28(4x4) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
Questions
Is there a KiCad symbol and footprint for the STM32F042G6U6?
Yes. The symbol is MCU_ST_STM32F0:STM32F042G6Ux and the footprint Package_DFN_QFN:QFN-28_4x4mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the STM32F042G6U6?
UFQFPN-28(4x4), with 28 pins. Its footprint is drawn on this page.
Where is the STM32F042G6U6 datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the STM32F042G6U6?
JLCPCB lists it as part C961597, with 1,089 in stock; the sellers' links on this page open their listings.
What can replace the STM32F042G6U6?
Parts like it in the library: the STM32G031G8U6 by STMicroelectronics, the STM32F031G6U6 by STMicroelectronics, the STM32F042G6U6TR by STMicroelectronics and the STM32C031G6U6 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the STM32F042G6U6?
6 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.