Skip to the content

STM32G031G8U6

STMicroelectronicsExtended

-40℃~+85℃ 1.7V~3.6V 12bit 26 32 Bit 64KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH UFQFPN-28(4x4) Microcontrollers (MCU/MPU/SOC) ROHS

Part id
st/STM32G031G8U6
Category
Microcontrollers (MCU, MPU, SOC)
Package
UFQFPN-28(4x4)
Pins
28
In stock
8,418 at JLCPCB (C432211)
Used on
13 open-source boards

Overview

The STM32G031G8U6 is a microcontroller made by STMicroelectronics in a UFQFPN-28(4x4) package with 28 pins. -40℃~+85℃ 1.7V~3.6V 12bit 26 32 Bit 64KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH UFQFPN-28(4x4) Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_ST_STM32G0:STM32G031G8Ux, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-28_4x4mm_P0.5mm, from KiCad's library), ready for a KiCad board. 8,418 are in stock at JLCPCB (part C432211). 13 open-source boards in 6 repositories on GitHub use it.

Symbol

1PC142PC153VDD4VSS5PF26PA07PA18PA29PA310PA411PA512PA613PA714PB015PB116PA817PC618PA9/PA1119PA10/PA1220PA1321PA1422PA1523PB324PB425PB526PB627PB728PB8
MCU_ST_STM32G0:STM32G031G8UxFrom KiCad's library

Footprint

Package_DFN_QFN:QFN-28_4x4mm_P0.5mmFrom KiCad's library

From the datasheet

19
Supply, least
1.7 V · VDD, recommended operating min · p. 45
Supply, most
3.6 V · VDD, recommended operating max · p. 45
Supply, least
1.62 V · VDDA, ADC operation min · p. 45
Supply, least
1.55 V · VBAT, backup operating min · p. 45
Supply, absolute maximum
4 V · VDD − VSS and VBAT − VSS, absolute max · p. 44
Works from
-40 °C · Ambient, suffix 6 min · p. 45
Works up to
85 °C · Ambient, suffix 6 max · p. 45
Junction, hottest
105 °C · Junction, suffix 6 operating max · p. 45
Junction, hottest
150 °C · Junction, absolute max · p. 44
Takes working
5.2 mA · Run typical, 64 MHz, Flash, VDD = 3.0 V, die 25°C · p. 49
Takes at most
6.9 mA · Run max, 64 MHz, Flash, VDD = 3.6 V, die 85°C · p. 49
Takes asleep
25 nA · Shutdown typical, RTC disabled, VDD = 3.0 V, 25°C · p. 53
A pin gives at most
15 mA · Any I/O source, or non-FT_f sink, absolute max · p. 44
A pin gives at most
20 mA · FT_f pin sink, absolute max · p. 44
Junction to air (UFQFPN28 4 × 4 mm)
89 K/W · Junction-to-ambient thermal resistance · p. 113
Junction to board (UFQFPN28 4 × 4 mm)
62 K/W · Junction-to-board thermal resistance · p. 113
Junction to case (UFQFPN28 4 × 4 mm)
7 K/W · Junction-to-case thermal resistance · p. 113
Supply, least
2.4 V · VDDA, VREFBUF operation min · p. 45
Takes asleep
200 nA · Standby typical, RTC disabled, VDD = 3.0 V, 25°C · p. 52

What it is and has

29
Core
Arm 32-bit Cortex-M0+ CPU · p. 1
Maximum CPU frequency
64 MHz · p. 11
Flash memory
64 Kbyte · p. 11
SRAM
8 Kbytes with hardware parity check · p. 1
GPIOs
26 · p. 11
I2C
2 · p. 11
USART
2 · p. 11
LPUART
1 · p. 11
SPI / I2S
2 SPI; 1 configurable as I2S · p. 11
DMA
5 channels with flexible mapping · p. 1
ADC
12-bit; 15 external and 2 internal channels · p. 11
Advanced-control timer
1, 16-bit high frequency · p. 11
General-purpose timers
4 × 16-bit and 1 × 32-bit · p. 11
Low-power timers
2 × 16-bit · p. 11
SysTick
1 · p. 11
Watchdogs
2 · p. 11
RTC
Yes · p. 11
Tamper pins
2 · p. 11
CRC
Calculation unit · p. 1
Low-power modes
Sleep, Stop, Standby, Shutdown · p. 1
Debug
Serial wire debug · p. 1
Unique ID
96-bit · p. 1
Package
UFQFPN28, 4 × 4 mm · p. 113
Maximum clock frequency
64 MHz · p. 1
Flash memory
Up to 64 Kbytes · p. 1
SRAM
8 Kbytes with HW parity check · p. 1
CRC calculation unit
Present · p. 1
Core
Arm® 32-bit Cortex®-M0+ CPU · p. 1
CRC
CRC calculation unit · p. 1

Around it

6
cap 100 nF
between VDD/VDDA and VSS/VSSA; One ceramic filtering capacitor; place as close as possible to the supply pin pair or below the pins on the PCB underside. · p. 43
cap 4.7 μF
between VDD/VDDA and VSS/VSSA; One ceramic filtering capacitor; place as close as possible to the supply pin pair or below the pins on the PCB underside. · p. 43
crystal 4 to 48 MHz
between OSC_IN and OSC_OUT; Crystal/ceramic resonator for HSE; place resonator and load capacitors as close as possible to oscillator pins. · p. 60
cap 5 pF to 20 pF
between OSC_IN and GND; CL1; typical range, high-quality ceramic for high-frequency applications; select to match the resonator load capacitance including PCB and MCU pin capacitance. · p. 60
crystal 32.768 kHz
between OSC32_IN and OSC32_OUT; LSE resonator; place resonator and load capacitors as close as possible to oscillator pins. · p. 61
cap 0.1 μF
between NRST and GND; Recommended NRST protection capacitor; place as close as possible to the device. · p. 75

Specifications

575
ParameterConditionsAs printedPage
External supply voltage VDD - VSSmin -0.3 · max 4 V44
Input voltage on any other pin VINMin VSS - 0.3max 4 V44
Current into VDD/VDDA power pin (source) IVDD/VDDAmax 100 mA44
Current out of VSS/VSSA ground pin (sink) IVSS/VSSAmax 100 mA44
Output current sunk by any I/O and control pin except FT_f IIO(PIN)max 15 mA44
Output current sunk by any FT_f pin IIO(PIN)max 20 mA44
Output current sourced by any I/O and control pin IIO(PIN)max 15 mA44
Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN)max 80 mA44
Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN)max 80 mA44
Injected current on a FT_xx pin IINJ(PIN)Negative injection limit -5 mA; positive injection NAmax -5 mA44
Total injected current (sum of all I/Os and control pins) ∑|IINJ(PIN)|Absolute sum of negative injected currentsmax 25 mA44
Storage temperature range TSTGmin -65 · max 150 °C44
Maximum junction temperature TJAbsolute maximummax 150 °C44
Internal AHB clock frequency fHCLKmin 0 · max 64 MHz45
Internal APB clock frequency fPCLKmin 0 · max 64 MHz45
Standard operating voltage VDDmin 1.7 · max 3.6 V45
Analog supply voltage VDDAFor ADC operationmin 1.62 · max 3.6 V45
Backup operating voltage VBATmin 1.55 · max 3.6 V45
I/O input voltage VINMax Min(VDD + 3.6, 5.5); disable internal pull-up/pull-down resistors above VDD + 0.3 Vmin -0.3 V45
Ambient temperature TASuffix 6min -40 · max 85 °C45
Junction temperature TJSuffix 6min -40 · max 105 °C45
VDD slew rate tVDDVDD falling; ULPEN = 0; max ∞min 10 us/V45
VDD slew rate tVDDVDD falling; ULPEN = 1; max ∞min 100 ms/V45
Supply current in Run mode IDD(Run)Range 1, PLL enabled, Flash, 64 MHz, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 5.2 · max 6.7 mA49
Supply current in Run mode IDD(Run)Range 1, PLL enabled, Flash, 64 MHz, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 5.4 · max 6.9 mA49
Supply current in Run mode IDD(Run)Range 1, PLL enabled, Flash, 56 MHz, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 4.7 · max 5.9 mA49
Supply current in Run mode IDD(Run)Range 1, PLL enabled, Flash, 56 MHz, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 4.8 · max 6 mA49
Supply current in Run mode IDD(Run)Range 1, PLL enabled, Flash, 48 MHz, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 4.2 · max 4.8 mA49
Supply current in Run mode IDD(Run)Range 1, PLL enabled, Flash, 48 MHz, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 4.3 · max 5 mA49
Supply current in Run mode IDD(Run)Range 1, PLL enabled, Flash, 32 MHz, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 2.9 · max 3.8 mA49
Supply current in Run mode IDD(Run)Range 1, PLL enabled, Flash, 32 MHz, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 3 · max 4.1 mA49
Supply current in Run mode IDD(Run)Range 1, PLL enabled, Flash, 24 MHz, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 2.3 · max 2.9 mA49
Supply current in Run mode IDD(Run)Range 1, PLL enabled, Flash, 24 MHz, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 2.4 · max 3.2 mA49
Supply current in Run mode IDD(Run)Range 1, Flash, 16 MHz HSE bypass, PLL enabled, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 1.5 · max 2.1 mA49
Supply current in Run mode IDD(Run)Range 1, Flash, 16 MHz HSE bypass, PLL enabled, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 1.5 · max 2.4 mA49
Supply current in Run mode IDD(Run)Range 1, PLL enabled, SRAM, 64 MHz, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 4.3 · max 6 mA49
Supply current in Run mode IDD(Run)Range 1, PLL enabled, SRAM, 64 MHz, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 4.4 · max 6.2 mA49
Supply current in Run mode IDD(Run)Range 1, PLL enabled, SRAM, 56 MHz, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 3.8 · max 5.4 mA49
Supply current in Run mode IDD(Run)Range 1, PLL enabled, SRAM, 56 MHz, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 3.9 · max 5.6 mA49
Supply current in Run mode IDD(Run)Range 1, PLL enabled, SRAM, 48 MHz, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 3.4 · max 4.8 mA49
Supply current in Run mode IDD(Run)Range 1, PLL enabled, SRAM, 48 MHz, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 3.5 · max 5 mA49
Supply current in Run mode IDD(Run)Range 1, PLL enabled, SRAM, 32 MHz, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 2.4 · max 3.4 mA49
Supply current in Run mode IDD(Run)Range 1, PLL enabled, SRAM, 32 MHz, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 2.5 · max 3.6 mA49
Supply current in Run mode IDD(Run)Range 1, PLL enabled, SRAM, 24 MHz, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 1.9 · max 2.7 mA49
Supply current in Run mode IDD(Run)Range 1, PLL enabled, SRAM, 24 MHz, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 1.9 · max 2.9 mA49
Supply current in Run mode IDD(Run)Range 1, SRAM, 16 MHz HSE bypass, PLL enabled, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 1.2 · max 1.9 mA49
Supply current in Run mode IDD(Run)Range 1, SRAM, 16 MHz HSE bypass, PLL enabled, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 1.2 · max 2 mA49
Supply current in Run mode IDD(Run)Range 2, Flash, 16 MHz HSE bypass, PLL enabled, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 1.2 · max 1.6 mA49
Supply current in Run mode IDD(Run)Range 2, Flash, 16 MHz HSE bypass, PLL enabled, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 1.2 · max 1.9 mA49
Supply current in Run mode IDD(Run)Range 2, Flash, 8 MHz HSE bypass, PLL enabled, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 0.7 · max 1.1 mA49
Supply current in Run mode IDD(Run)Range 2, Flash, 8 MHz HSE bypass, PLL enabled, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 0.7 · max 1.3 mA49
Supply current in Run mode IDD(Run)Range 2, Flash, 2 MHz HSE bypass, PLL enabled, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 0.2 · max 0.5 mA49
Supply current in Run mode IDD(Run)Range 2, Flash, 2 MHz HSE bypass, PLL enabled, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 0.3 · max 0.8 mA49
Supply current in Run mode IDD(Run)Range 2, SRAM, 16 MHz HSE bypass, PLL enabled, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 1 · max 1.5 mA49
Supply current in Run mode IDD(Run)Range 2, SRAM, 16 MHz HSE bypass, PLL enabled, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 1 · max 1.7 mA49
Supply current in Run mode IDD(Run)Range 2, SRAM, 8 MHz HSE bypass, PLL enabled, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 0.5 · max 1 mA49
Supply current in Run mode IDD(Run)Range 2, SRAM, 8 MHz HSE bypass, PLL enabled, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 0.6 · max 1.1 mA49
Supply current in Run mode IDD(Run)Range 2, SRAM, 2 MHz HSE bypass, PLL enabled, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 0.2 · max 0.5 mA49
Supply current in Run mode IDD(Run)Range 2, SRAM, 2 MHz HSE bypass, PLL enabled, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 0.3 · max 0.7 mA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled, Flash, 2 MHz HSE bypass, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 165 · max 470 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled, Flash, 2 MHz HSE bypass, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 205 · max 660 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled, Flash, 1 MHz HSE bypass, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 90 · max 400 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled, Flash, 1 MHz HSE bypass, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 120 · max 580 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled, Flash, 500 kHz HSE bypass, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 53 · max 360 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled, Flash, 500 kHz HSE bypass, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 81 · max 530 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled, Flash, 125 kHz HSE bypass, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 23 · max 310 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled, Flash, 125 kHz HSE bypass, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 51 · max 500 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled, Flash, 32 kHz LSE bypass, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 16 · max 270 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled, Flash, 32 kHz LSE bypass, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 43 · max 400 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled, SRAM, 2 MHz HSE bypass, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 146 · max 460 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled, SRAM, 2 MHz HSE bypass, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 174 · max 660 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled, SRAM, 1 MHz HSE bypass, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 83 · max 390 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled, SRAM, 1 MHz HSE bypass, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 104 · max 630 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled, SRAM, 500 kHz HSE bypass, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 44 · max 340 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled, SRAM, 500 kHz HSE bypass, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 74 · max 590 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled, SRAM, 125 kHz HSE bypass, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 19 · max 300 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled, SRAM, 125 kHz HSE bypass, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 46 · max 420 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled, SRAM, 32 kHz LSE bypass, die 25°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 14 · max 260 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled, SRAM, 32 kHz LSE bypass, die 85°C; typ VDD 3.0 V, max 3.6 V; peripherals disabledtyp 34 · max 340 uA49
Supply current in Sleep mode IDD(Sleep)Range 1, 64 MHz PLL, Flash enabled, peripherals disabled, 25°Ctyp 1.3 · max 1.8 mA51
Supply current in Sleep mode IDD(Sleep)Range 1, 64 MHz PLL, Flash enabled, peripherals disabled, 85°Ctyp 1.4 · max 2 mA51
Supply current in Sleep mode IDD(Sleep)Range 1, 56 MHz PLL, Flash enabled, peripherals disabled, 25°Ctyp 1.2 · max 1.6 mA51
Supply current in Sleep mode IDD(Sleep)Range 1, 56 MHz PLL, Flash enabled, peripherals disabled, 85°Ctyp 1.3 · max 1.8 mA51
Supply current in Sleep mode IDD(Sleep)Range 1, 48 MHz PLL, Flash enabled, peripherals disabled, 25°Ctyp 1.1 · max 1.5 mA51
Supply current in Sleep mode IDD(Sleep)Range 1, 48 MHz PLL, Flash enabled, peripherals disabled, 85°Ctyp 1.1 · max 1.6 mA51
Supply current in Sleep mode IDD(Sleep)Range 1, 32 MHz PLL, Flash enabled, peripherals disabled, 25°Ctyp 0.8 · max 1.2 mA51
Supply current in Sleep mode IDD(Sleep)Range 1, 32 MHz PLL, Flash enabled, peripherals disabled, 85°Ctyp 0.8 · max 1.2 mA51
Supply current in Sleep mode IDD(Sleep)Range 1, 24 MHz PLL, Flash enabled, peripherals disabled, 25°Ctyp 0.7 · max 0.9 mA51
Supply current in Sleep mode IDD(Sleep)Range 1, 24 MHz PLL, Flash enabled, peripherals disabled, 85°Ctyp 0.7 · max 1 mA51
Supply current in Sleep mode IDD(Sleep)Range 1, 16 MHz HSE bypass, PLL disabled, Flash enabled, peripherals disabled, 25°Ctyp 0.4 · max 0.6 mA51
Supply current in Sleep mode IDD(Sleep)Range 1, 16 MHz HSE bypass, PLL disabled, Flash enabled, peripherals disabled, 85°Ctyp 0.4 · max 0.7 mA51
Supply current in Sleep mode IDD(Sleep)Range 2, 16 MHz HSE bypass, PLL disabled, Flash enabled, peripherals disabled, 25°Ctyp 0.3 · max 0.5 mA51
Supply current in Sleep mode IDD(Sleep)Range 2, 16 MHz HSE bypass, PLL disabled, Flash enabled, peripherals disabled, 85°Ctyp 0.4 · max 0.6 mA51
Supply current in Sleep mode IDD(Sleep)Range 2, 8 MHz HSE bypass, PLL disabled, Flash enabled, peripherals disabled, 25°Ctyp 0.2 · max 0.3 mA51
Supply current in Sleep mode IDD(Sleep)Range 2, 8 MHz HSE bypass, PLL disabled, Flash enabled, peripherals disabled, 85°Ctyp 0.3 · max 0.5 mA51
Supply current in Sleep mode IDD(Sleep)Range 2, 2 MHz HSE bypass, PLL disabled, Flash enabled, peripherals disabled, 25°Ctyp 0.1 · max 0.2 mA51
Supply current in Sleep mode IDD(Sleep)Range 2, 2 MHz HSE bypass, PLL disabled, Flash enabled, peripherals disabled, 85°Ctyp 0.2 · max 0.4 mA51
Supply current in Low-power sleep mode IDD(LPSleep)Flash and PLL disabled, peripherals disabled, 2 MHz HSE bypass, 25°Ctyp 40 · max 145 uA51
Supply current in Low-power sleep mode IDD(LPSleep)Flash and PLL disabled, peripherals disabled, 2 MHz HSE bypass, 85°Ctyp 70 · max 340 uA51
Supply current in Low-power sleep mode IDD(LPSleep)Flash and PLL disabled, peripherals disabled, 1 MHz HSE bypass, 25°Ctyp 27 · max 125 uA51
Supply current in Low-power sleep mode IDD(LPSleep)Flash and PLL disabled, peripherals disabled, 1 MHz HSE bypass, 85°Ctyp 55 · max 315 uA51
Supply current in Low-power sleep mode IDD(LPSleep)Flash and PLL disabled, peripherals disabled, 500 kHz HSE bypass, 25°Ctyp 21 · max 120 uA51
Supply current in Low-power sleep mode IDD(LPSleep)Flash and PLL disabled, peripherals disabled, 500 kHz HSE bypass, 85°Ctyp 47 · max 240 uA51
Supply current in Low-power sleep mode IDD(LPSleep)Flash and PLL disabled, peripherals disabled, 125 kHz HSE bypass, 25°Ctyp 15 · max 110 uA51
Supply current in Low-power sleep mode IDD(LPSleep)Flash and PLL disabled, peripherals disabled, 125 kHz HSE bypass, 85°Ctyp 42 · max 225 uA51
Supply current in Low-power sleep mode IDD(LPSleep)Flash and PLL disabled, peripherals disabled, 32 kHz LSE bypass, 25°Ctyp 12 · max 105 uA51
Supply current in Low-power sleep mode IDD(LPSleep)Flash and PLL disabled, peripherals disabled, 32 kHz LSE bypass, 85°Ctyp 40 · max 215 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel enabled, VDD 1.8 V, 25°Ctyp 265 · max 330 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel enabled, VDD 1.8 V, 85°Ctyp 290 · max 420 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel enabled, VDD 2.4 V, 25°Ctyp 265 · max 330 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel enabled, VDD 2.4 V, 85°Ctyp 290 · max 450 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel enabled, VDD 3 V, 25°Ctyp 270 · max 345 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel enabled, VDD 3 V, 85°Ctyp 295 · max 485 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel enabled, VDD 3.6 V, 25°Ctyp 270 · max 370 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel enabled, VDD 3.6 V, 85°Ctyp 295 · max 495 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel disabled, VDD 1.8 V, 25°Ctyp 92 · max 120 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel disabled, VDD 1.8 V, 85°Ctyp 130 · max 180 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel disabled, VDD 2.4 V, 25°Ctyp 95 · max 120 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel disabled, VDD 2.4 V, 85°Ctyp 130 · max 220 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel disabled, VDD 3 V, 25°Ctyp 97 · max 125 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel disabled, VDD 3 V, 85°Ctyp 135 · max 235 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel disabled, VDD 3.6 V, 25°Ctyp 99 · max 125 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel disabled, VDD 3.6 V, 85°Ctyp 135 · max 245 uA51
Extra supply current to retain SRAM content ∆IDD(SRAM)SRAM retention enabled, VDD 1.8 V, 25°C; add to IDD(Standby)typ 0.3 · max 0.4 uA53
Extra supply current to retain SRAM content ∆IDD(SRAM)SRAM retention enabled, VDD 1.8 V, 85°C; add to IDD(Standby)typ 0.8 · max 7 uA53
Extra supply current to retain SRAM content ∆IDD(SRAM)SRAM retention enabled, VDD 2.4 V, 25°C; add to IDD(Standby)typ 0.4 · max 0.9 uA53
Extra supply current to retain SRAM content ∆IDD(SRAM)SRAM retention enabled, VDD 2.4 V, 85°C; add to IDD(Standby)typ 0.9 · max 8 uA53
Extra supply current to retain SRAM content ∆IDD(SRAM)SRAM retention enabled, VDD 3.0 V, 25°C; add to IDD(Standby)typ 0.5 · max 1.3 uA53
Extra supply current to retain SRAM content ∆IDD(SRAM)SRAM retention enabled, VDD 3.0 V, 85°C; add to IDD(Standby)typ 1 · max 8 uA53
Extra supply current to retain SRAM content ∆IDD(SRAM)SRAM retention enabled, VDD 3.6 V, 25°C; add to IDD(Standby)typ 0.6 · max 1.3 uA53
Extra supply current to retain SRAM content ∆IDD(SRAM)SRAM retention enabled, VDD 3.6 V, 85°C; add to IDD(Standby)typ 1.1 · max 9 uA53
Supply current in Shutdown mode IDD(Shutdown)RTC disabled, VDD 1.8 V, 25°Ctyp 12 · max 250 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC disabled, VDD 1.8 V, 85°Ctyp 370 · max 2700 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC disabled, VDD 2.4 V, 25°Ctyp 18 · max 450 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC disabled, VDD 2.4 V, 85°Ctyp 430 · max 3000 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC disabled, VDD 3.0 V, 25°Ctyp 25 · max 800 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC disabled, VDD 3.0 V, 85°Ctyp 500 · max 3700 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC disabled, VDD 3.6 V, 25°Ctyp 42 · max 900 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC disabled, VDD 3.6 V, 85°Ctyp 620 · max 4500 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC enabled, LSE bypass 32.768 kHz, VDD 1.8 V, 25°Ctyp 185 · max 850 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC enabled, LSE bypass 32.768 kHz, VDD 1.8 V, 85°Ctyp 550 · max 2700 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC enabled, LSE bypass 32.768 kHz, VDD 2.4 V, 25°Ctyp 265 · max 1450 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC enabled, LSE bypass 32.768 kHz, VDD 2.4 V, 85°Ctyp 675 · max 3000 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC enabled, LSE bypass 32.768 kHz, VDD 3.0 V, 25°Ctyp 350 · max 2350 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC enabled, LSE bypass 32.768 kHz, VDD 3.0 V, 85°Ctyp 835 · max 3700 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC enabled, LSE bypass 32.768 kHz, VDD 3.6 V, 25°Ctyp 460 · max 3100 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC enabled, LSE bypass 32.768 kHz, VDD 3.6 V, 85°Ctyp 1050 · max 4400 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE bypass 32.768 kHz, VDD column 1.8 V, 25°Ctyp 180 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE bypass 32.768 kHz, VDD column 1.8 V, 85°Ctyp 240 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE bypass 32.768 kHz, VDD column 2.4 V, 25°Ctyp 250 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE bypass 32.768 kHz, VDD column 2.4 V, 85°Ctyp 330 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE bypass 32.768 kHz, VDD column 3.0 V, 25°Ctyp 330 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE bypass 32.768 kHz, VDD column 3.0 V, 85°Ctyp 420 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE bypass 32.768 kHz, VDD column 3.6 V, 25°Ctyp 430 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE bypass 32.768 kHz, VDD column 3.6 V, 85°Ctyp 550 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE crystal 32.768 kHz, VDD column 1.8 V, 25°Ctyp 300 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE crystal 32.768 kHz, VDD column 1.8 V, 85°Ctyp 360 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE crystal 32.768 kHz, VDD column 2.4 V, 25°Ctyp 380 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE crystal 32.768 kHz, VDD column 2.4 V, 85°Ctyp 420 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE crystal 32.768 kHz, VDD column 3.0 V, 25°Ctyp 460 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE crystal 32.768 kHz, VDD column 3.0 V, 85°Ctyp 480 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE crystal 32.768 kHz, VDD column 3.6 V, 25°Ctyp 580 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE crystal 32.768 kHz, VDD column 3.6 V, 85°Ctyp 700 nA53
Supply current in VBAT mode IDD(VBAT)RTC disabled, VDD column 1.8 V, 25°Ctyp 1 nA53
Supply current in VBAT mode IDD(VBAT)RTC disabled, VDD column 1.8 V, 85°Ctyp 59 nA53
Supply current in VBAT mode IDD(VBAT)RTC disabled, VDD column 2.4 V, 25°Ctyp 1 nA53
Supply current in VBAT mode IDD(VBAT)RTC disabled, VDD column 2.4 V, 85°Ctyp 68 nA53
Supply current in VBAT mode IDD(VBAT)RTC disabled, VDD column 3.0 V, 25°Ctyp 2 nA53
Supply current in VBAT mode IDD(VBAT)RTC disabled, VDD column 3.0 V, 85°Ctyp 78 nA53
Supply current in VBAT mode IDD(VBAT)RTC disabled, VDD column 3.6 V, 25°Ctyp 5 nA53
Supply current in VBAT mode IDD(VBAT)RTC disabled, VDD column 3.6 V, 85°Ctyp 97 nA53
Electrostatic discharge voltage (human body model) VESD(HBM)TA = +25 °C; ANSI/ESDA/JEDEC JS-001; class 1Cmax 1000 V67
Electrostatic discharge voltage (charge device model) VESD(CDM)TA = +25 °C; ANSI/ESDA/JEDEC JS-002; class C2amax 500 V67
Output low level voltage for an I/O pin VOLCMOS port, |IIO| 6 mA, VDDIO1 ≥ 2.7 Vmax 0.4 V72
Output low level voltage for an I/O pin VOLTTL port, |IIO| = 6 mA, VDDIO1 ≥ 2.7 Vmax 0.4 V72
Output high level voltage for an I/O pin VOHTTL port, |IIO| = 6 mA, VDDIO1 ≥ 2.7 Vmin 2.4 V72
Output low level voltage for an I/O pin VOLAll I/Os, |IIO| = 15 mA, VDDIO1 ≥ 2.7 Vmax 1.3 V72
Output low level voltage for an I/O pin VOL|IIO| = 3 mA, VDDIO1 ≥ 1.62 Vmax 0.4 V72
Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with _f option) VOLFM+|IIO| = 20 mA, VDDIO1 ≥ 2.7 Vmax 0.4 V72
Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with _f option) VOLFM+|IIO| = 9 mA, VDDIO1 ≥ 1.62 Vmax 0.4 V72
Maximum frequency FmaxSpeed 00; C=50 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 Vmax 2 MHz72
Maximum frequency FmaxSpeed 00; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 Vmax 0.35 MHz72
Maximum frequency FmaxSpeed 00; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 Vmax 3 MHz72
Maximum frequency FmaxSpeed 00; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 Vmax 0.45 MHz72
Output rise and fall time Tr/TfSpeed 00; C=50 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 Vmax 100 ns72
Output rise and fall time Tr/TfSpeed 00; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 Vmax 225 ns72
Output rise and fall time Tr/TfSpeed 00; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 Vmax 75 ns72
Output rise and fall time Tr/TfSpeed 00; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 Vmax 150 ns72
Thermal resistance ΘUFQFPN28 4 × 4 mm; junction-to-ambient; table Value columntyp 89 °C/W113
Thermal resistance ΘUFQFPN28 4 × 4 mm; junction-to-board; table Value columntyp 62 °C/W113
Thermal resistance ΘUFQFPN28 4 × 4 mm; junction-to-case; table Value columntyp 7 °C/W113
Input voltage on any other pin VINmax 4 V44
Total injected current (sum of all I/Os and control pins) ∑|IINJ(PIN)|max 25 mA44
Maximum junction temperature TJmax 150 °C44
Internal AHB clock frequency fHCLK-min 0 · max 64 MHz45
Internal APB clock frequency fPCLK-min 0 · max 64 MHz45
Standard operating voltage VDD-min 1.7 · max 3.6 V45
Analog supply voltage VDDAFor VREFBUF operationmin 2.4 · max 3.6 V45
Backup operating voltage VBAT-min 1.55 · max 3.6 V45
I/O input voltage VIN-min -0.3 V45
VDD slew rate tVDDVDD falling; ULPEN = 0min 10 us/V45
VDD slew rate tVDDVDD falling; ULPEN = 1min 100 ms/V45
Internal reference voltage VREFINT-40°C < TJ < 130°Cmin 1.182 · typ 1.212 · max 1.232 V47
ADC sampling time when reading the internal reference voltage tS_vrefint-min 4 us47
Start time of reference voltage buffer when ADC is enable tstart_vrefint-typ 8 · max 12 us47
VREFINT buffer consumption from VDD when converted by ADC IDD(VREFINTBUF)-typ 12.5 · max 20 uA47
Internal reference voltage spread over the temperature range ∆VREFINTVDD = 3 Vtyp 5 · max 7.5 mV47
Temperature coefficient TCoeff_vrefint-typ 30 · max 50 ppm/°C47
Long term stability ACoeff1000 hours, T = 25 °Ctyp 300 · max 1000 ppm47
Voltage coefficient VDDCoeff3.0 V < VDD < 3.6 Vtyp 250 · max 1200 ppm/V47
1/4 reference voltage VREFINT_DIV1-min 24 · typ 25 · max 26 % VREFINT47
1/2 reference voltage VREFINT_DIV2-min 49 · typ 50 · max 51 % VREFINT47
3/4 reference voltage VREFINT_DIV3-min 74 · typ 75 · max 76 % VREFINT47
Supply current in Run mode IDD(Run)Range 1; PLL enabled; 64 MHz; Flash memory; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 5.2 · max 6.7 mA49
Supply current in Run mode IDD(Run)Range 1; PLL enabled; 64 MHz; Flash memory; 85°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 5.4 · max 6.9 mA49
Supply current in Run mode IDD(Run)Range 1; PLL enabled; 56 MHz; Flash memory; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 4.7 · max 5.9 mA49
Supply current in Run mode IDD(Run)Range 1; PLL enabled; 48 MHz; Flash memory; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 4.2 · max 4.8 mA49
Supply current in Run mode IDD(Run)Range 1; PLL enabled; 32 MHz; Flash memory; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 2.9 · max 3.8 mA49
Supply current in Run mode IDD(Run)Range 1; PLL enabled; 24 MHz; Flash memory; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 2.3 · max 2.9 mA49
Supply current in Run mode IDD(Run)Range 1; PLL enabled; 16 MHz; Flash memory; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 1.5 · max 2.1 mA49
Supply current in Run mode IDD(Run)Range 1; PLL enabled; 64 MHz; SRAM; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 4.3 · max 6 mA49
Supply current in Run mode IDD(Run)Range 1; PLL enabled; 56 MHz; SRAM; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 3.8 · max 5.4 mA49
Supply current in Run mode IDD(Run)Range 1; PLL enabled; 48 MHz; SRAM; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 3.4 · max 4.8 mA49
Supply current in Run mode IDD(Run)Range 1; PLL enabled; 32 MHz; SRAM; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 2.4 · max 3.4 mA49
Supply current in Run mode IDD(Run)Range 1; PLL enabled; 24 MHz; SRAM; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 1.9 · max 2.7 mA49
Supply current in Run mode IDD(Run)Range 1; PLL enabled; 16 MHz; SRAM; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 1.2 · max 1.9 mA49
Supply current in Run mode IDD(Run)Range 2; PLL enabled; 16 MHz; Flash memory; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 1.2 · max 1.6 mA49
Supply current in Run mode IDD(Run)Range 2; PLL enabled; 8 MHz; Flash memory; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 0.7 · max 1.1 mA49
Supply current in Run mode IDD(Run)Range 2; PLL enabled; 2 MHz; Flash memory; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 0.2 · max 0.5 mA49
Supply current in Run mode IDD(Run)Range 2; PLL enabled; 16 MHz; SRAM; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 1 · max 1.5 mA49
Supply current in Run mode IDD(Run)Range 2; PLL enabled; 8 MHz; SRAM; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 0.5 · max 1 mA49
Supply current in Run mode IDD(Run)Range 2; PLL enabled; 2 MHz; SRAM; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 0.2 · max 0.5 mA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled; HSE bypass; 2 MHz; Flash memory; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 165 · max 470 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled; HSE bypass; 1 MHz; Flash memory; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 90 · max 400 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled; HSE bypass; 500 kHz; Flash memory; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 53 · max 360 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled; HSE bypass; 125 kHz; Flash memory; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 23 · max 310 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled; LSE bypass; 32 kHz; Flash memory; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 16 · max 270 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled; HSE bypass; 2 MHz; SRAM; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 146 · max 460 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled; HSE bypass; 1 MHz; SRAM; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 83 · max 390 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled; HSE bypass; 500 kHz; SRAM; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 44 · max 340 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled; HSE bypass; 125 kHz; SRAM; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 19 · max 300 uA49
Supply current in Low-power run mode IDD(LPRun)PLL disabled; LSE bypass; 32 kHz; SRAM; 25°C; typical VDD = 3.0 V, maximum VDD = 3.6 V; all peripherals disabledtyp 14 · max 260 uA49
Supply current in Run mode IDD(Run)Range 1; PLLRCLK = 64 MHz; Reduced code; Flash memory; VDD = 3.3 V; 25°C; peripherals disabledtyp 5.4 mA50
Supply current in Run mode IDD(Run)Range 1; PLLRCLK = 64 MHz; Coremark; Flash memory; VDD = 3.3 V; 25°C; peripherals disabledtyp 5.2 mA50
Supply current in Run mode IDD(Run)Range 1; PLLRCLK = 64 MHz; Dhrystone 2.1; Flash memory; VDD = 3.3 V; 25°C; peripherals disabledtyp 5.3 mA50
Supply current in Run mode IDD(Run)Range 1; PLLRCLK = 64 MHz; Fibonacci; Flash memory; VDD = 3.3 V; 25°C; peripherals disabledtyp 4.3 mA50
Supply current in Run mode IDD(Run)Range 1; PLLRCLK = 64 MHz; While(1) loop; Flash memory; VDD = 3.3 V; 25°C; peripherals disabledtyp 4 mA50
Supply current in Run mode IDD(Run)Range 1; PLLRCLK = 64 MHz; Reduced code; SRAM; VDD = 3.3 V; 25°C; peripherals disabledtyp 4.4 mA50
Supply current in Run mode IDD(Run)Range 1; PLLRCLK = 64 MHz; Coremark; SRAM; VDD = 3.3 V; 25°C; peripherals disabledtyp 5.6 mA50
Supply current in Run mode IDD(Run)Range 1; PLLRCLK = 64 MHz; Dhrystone 2.1; SRAM; VDD = 3.3 V; 25°C; peripherals disabledtyp 5.6 mA50
Supply current in Run mode IDD(Run)Range 1; PLLRCLK = 64 MHz; Fibonacci; SRAM; VDD = 3.3 V; 25°C; peripherals disabledtyp 4.3 mA50
Supply current in Run mode IDD(Run)Range 1; PLLRCLK = 64 MHz; While(1) loop; SRAM; VDD = 3.3 V; 25°C; peripherals disabledtyp 4 mA50
Supply current in Run mode IDD(Run)Range 2; HSI16 = 16 MHz; PLL disabled; Reduced code; Flash memory; VDD = 3.3 V; 25°C; peripherals disabledtyp 1.6 mA50
Supply current in Run mode IDD(Run)Range 2; HSI16 = 16 MHz; PLL disabled; Coremark; Flash memory; VDD = 3.3 V; 25°C; peripherals disabledtyp 1.5 mA50
Supply current in Run mode IDD(Run)Range 2; HSI16 = 16 MHz; PLL disabled; Dhrystone 2.1; Flash memory; VDD = 3.3 V; 25°C; peripherals disabledtyp 1.5 mA50
Supply current in Run mode IDD(Run)Range 2; HSI16 = 16 MHz; PLL disabled; Fibonacci; Flash memory; VDD = 3.3 V; 25°C; peripherals disabledtyp 1.1 mA50
Supply current in Run mode IDD(Run)Range 2; HSI16 = 16 MHz; PLL disabled; While(1) loop; Flash memory; VDD = 3.3 V; 25°C; peripherals disabledtyp 1 mA50
Supply current in Run mode IDD(Run)Range 2; HSI16 = 16 MHz; PLL disabled; Reduced code; SRAM; VDD = 3.3 V; 25°C; peripherals disabledtyp 1.3 mA50
Supply current in Run mode IDD(Run)Range 2; HSI16 = 16 MHz; PLL disabled; Coremark; SRAM; VDD = 3.3 V; 25°C; peripherals disabledtyp 1.4 mA50
Supply current in Run mode IDD(Run)Range 2; HSI16 = 16 MHz; PLL disabled; Dhrystone 2.1; SRAM; VDD = 3.3 V; 25°C; peripherals disabledtyp 1.4 mA50
Supply current in Run mode IDD(Run)Range 2; HSI16 = 16 MHz; PLL disabled; Fibonacci; SRAM; VDD = 3.3 V; 25°C; peripherals disabledtyp 1 mA50
Supply current in Run mode IDD(Run)Range 2; HSI16 = 16 MHz; PLL disabled; While(1) loop; SRAM; VDD = 3.3 V; 25°C; peripherals disabledtyp 1 mA50
Supply current in Low-power run mode IDD(LPRun)HSI16/8 = 2 MHz; PLL disabled; Reduced code; Flash memory; VDD = 3.3 V; 25°C; peripherals disabledtyp 345 uA50
Supply current in Low-power run mode IDD(LPRun)HSI16/8 = 2 MHz; PLL disabled; Coremark; Flash memory; VDD = 3.3 V; 25°C; peripherals disabledtyp 400 uA50
Supply current in Low-power run mode IDD(LPRun)HSI16/8 = 2 MHz; PLL disabled; Dhrystone 2.1; Flash memory; VDD = 3.3 V; 25°C; peripherals disabledtyp 400 uA50
Supply current in Low-power run mode IDD(LPRun)HSI16/8 = 2 MHz; PLL disabled; Fibonacci; Flash memory; VDD = 3.3 V; 25°C; peripherals disabledtyp 365 uA50
Supply current in Low-power run mode IDD(LPRun)HSI16/8 = 2 MHz; PLL disabled; While(1) loop; Flash memory; VDD = 3.3 V; 25°C; peripherals disabledtyp 415 uA50
Supply current in Low-power run mode IDD(LPRun)HSI16/8 = 2 MHz; PLL disabled; Reduced code; SRAM; VDD = 3.3 V; 25°C; peripherals disabledtyp 225 uA50
Supply current in Low-power run mode IDD(LPRun)HSI16/8 = 2 MHz; PLL disabled; Coremark; SRAM; VDD = 3.3 V; 25°C; peripherals disabledtyp 515 uA50
Supply current in Low-power run mode IDD(LPRun)HSI16/8 = 2 MHz; PLL disabled; Dhrystone 2.1; SRAM; VDD = 3.3 V; 25°C; peripherals disabledtyp 515 uA50
Supply current in Low-power run mode IDD(LPRun)HSI16/8 = 2 MHz; PLL disabled; Fibonacci; SRAM; VDD = 3.3 V; 25°C; peripherals disabledtyp 295 uA50
Supply current in Low-power run mode IDD(LPRun)HSI16/8 = 2 MHz; PLL disabled; While(1) loop; SRAM; VDD = 3.3 V; 25°C; peripherals disabledtyp 290 uA50
Supply current in Sleep mode IDD(Sleep)Range 1; 64 MHz; PLL enabled; Flash memory enabled; peripherals disabled; 25°Ctyp 1.3 · max 1.8 mA51
Supply current in Sleep mode IDD(Sleep)Range 1; 56 MHz; PLL enabled; Flash memory enabled; peripherals disabled; 25°Ctyp 1.2 · max 1.6 mA51
Supply current in Sleep mode IDD(Sleep)Range 1; 48 MHz; PLL enabled; Flash memory enabled; peripherals disabled; 25°Ctyp 1.1 · max 1.5 mA51
Supply current in Sleep mode IDD(Sleep)Range 1; 32 MHz; PLL enabled; Flash memory enabled; peripherals disabled; 25°Ctyp 0.8 · max 1.2 mA51
Supply current in Sleep mode IDD(Sleep)Range 2; 16 MHz; HSE bypass; PLL disabled; Flash memory enabled; peripherals disabled; 25°Ctyp 0.3 · max 0.5 mA51
Supply current in Sleep mode IDD(Sleep)Range 2; 8 MHz; HSE bypass; PLL disabled; Flash memory enabled; peripherals disabled; 25°Ctyp 0.2 · max 0.3 mA51
Supply current in Sleep mode IDD(Sleep)Range 2; 2 MHz; HSE bypass; PLL disabled; Flash memory enabled; peripherals disabled; 25°Ctyp 0.1 · max 0.2 mA51
Supply current in Low-power sleep mode IDD(LPSleep)2 MHz; HSE bypass; PLL disabled; Flash memory disabled; peripherals disabled; 25°Ctyp 40 · max 145 uA51
Supply current in Low-power sleep mode IDD(LPSleep)1 MHz; HSE bypass; PLL disabled; Flash memory disabled; peripherals disabled; 25°Ctyp 27 · max 125 uA51
Supply current in Low-power sleep mode IDD(LPSleep)500 kHz; HSE bypass; PLL disabled; Flash memory disabled; peripherals disabled; 25°Ctyp 21 · max 120 uA51
Supply current in Low-power sleep mode IDD(LPSleep)125 kHz; HSE bypass; PLL disabled; Flash memory disabled; peripherals disabled; 25°Ctyp 15 · max 110 uA51
Supply current in Low-power sleep mode IDD(LPSleep)32 kHz; LSE bypass; PLL disabled; Flash memory disabled; peripherals disabled; 25°Ctyp 12 · max 105 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel enabled; VDD = 1.8 V; 25°Ctyp 265 · max 330 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel enabled; VDD = 2.4 V; 25°Ctyp 265 · max 330 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel enabled; VDD = 3 V; 25°Ctyp 270 · max 345 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel enabled; VDD = 3.6 V; 25°Ctyp 270 · max 370 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel disabled; VDD = 1.8 V; 25°Ctyp 92 · max 120 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel disabled; VDD = 2.4 V; 25°Ctyp 95 · max 120 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel disabled; VDD = 3 V; 25°Ctyp 97 · max 125 uA51
Supply current in Stop 0 mode IDD(Stop 0)HSI kernel disabled; VDD = 3.6 V; 25°Ctyp 99 · max 125 uA51
Supply current in Stop 1 mode IDD(Stop 1)Flash memory not powered; RTC disabled; VDD = 1.8 V; 25°Ctyp 2.9 · max 9 uA52
Supply current in Stop 1 mode IDD(Stop 1)Flash memory not powered; RTC disabled; VDD = 2.4 V; 25°Ctyp 3.1 · max 11 uA52
Supply current in Stop 1 mode IDD(Stop 1)Flash memory not powered; RTC disabled; VDD = 3 V; 25°Ctyp 3.3 · max 16 uA52
Supply current in Stop 1 mode IDD(Stop 1)Flash memory not powered; RTC disabled; VDD = 3.6 V; 25°Ctyp 3.6 · max 20 uA52
Supply current in Stop 1 mode IDD(Stop 1)Flash memory not powered; RTC enabled, clocked by LSI; VDD = 1.8 V; 25°Ctyp 3.3 · max 11 uA52
Supply current in Stop 1 mode IDD(Stop 1)Flash memory not powered; RTC enabled, clocked by LSI; VDD = 2.4 V; 25°Ctyp 3.6 · max 14 uA52
Supply current in Stop 1 mode IDD(Stop 1)Flash memory not powered; RTC enabled, clocked by LSI; VDD = 3 V; 25°Ctyp 3.7 · max 18 uA52
Supply current in Stop 1 mode IDD(Stop 1)Flash memory not powered; RTC enabled, clocked by LSI; VDD = 3.6 V; 25°Ctyp 4.2 · max 23 uA52
Supply current in Stop 1 mode IDD(Stop 1)Flash memory powered; RTC disabled; VDD = 1.8 V; 25°Ctyp 7 · max 17 uA52
Supply current in Stop 1 mode IDD(Stop 1)Flash memory powered; RTC disabled; VDD = 2.4 V; 25°Ctyp 7.3 · max 18 uA52
Supply current in Stop 1 mode IDD(Stop 1)Flash memory powered; RTC disabled; VDD = 3 V; 25°Ctyp 7.5 · max 19 uA52
Supply current in Stop 1 mode IDD(Stop 1)Flash memory powered; RTC disabled; VDD = 3.6 V; 25°Ctyp 7.8 · max 23 uA52
Supply current in Standby mode IDD(Standby)RTC disabled; without SRAM retention; ULPEN set; VDD = 1.8 V; 25°Ctyp 0.1 · max 0.7 uA52
Supply current in Standby mode IDD(Standby)RTC disabled; without SRAM retention; ULPEN set; VDD = 2.4 V; 25°Ctyp 0.1 · max 0.7 uA52
Supply current in Standby mode IDD(Standby)RTC disabled; without SRAM retention; ULPEN set; VDD = 3.0 V; 25°Ctyp 0.2 · max 0.9 uA52
Supply current in Standby mode IDD(Standby)RTC disabled; without SRAM retention; ULPEN set; VDD = 3.6 V; 25°Ctyp 0.4 · max 1 uA52
Supply current in Standby mode IDD(Standby)RTC enabled, clocked by LSI; without SRAM retention; ULPEN set; VDD = 1.8 V; 25°Ctyp 0.3 · max 0.8 uA52
Supply current in Standby mode IDD(Standby)RTC enabled, clocked by LSI; without SRAM retention; ULPEN set; VDD = 2.4 V; 25°Ctyp 0.4 · max 1 uA52
Supply current in Standby mode IDD(Standby)RTC enabled, clocked by LSI; without SRAM retention; ULPEN set; VDD = 3.0 V; 25°Ctyp 0.6 · max 1.2 uA52
Supply current in Standby mode IDD(Standby)RTC enabled, clocked by LSI; without SRAM retention; ULPEN set; VDD = 3.6 V; 25°Ctyp 0.8 · max 1.6 uA52
Supply current in Standby mode IDD(Standby)IWDG enabled, clocked by LSI; without SRAM retention; ULPEN set; VDD = 1.8 V; 25°Ctyp 0.2 · max 0.8 uA52
Supply current in Standby mode IDD(Standby)IWDG enabled, clocked by LSI; without SRAM retention; ULPEN set; VDD = 2.4 V; 25°Ctyp 0.3 · max 0.8 uA52
Supply current in Standby mode IDD(Standby)IWDG enabled, clocked by LSI; without SRAM retention; ULPEN set; VDD = 3.0 V; 25°Ctyp 0.4 · max 1.1 uA52
Supply current in Standby mode IDD(Standby)IWDG enabled, clocked by LSI; without SRAM retention; ULPEN set; VDD = 3.6 V; 25°Ctyp 0.7 · max 1.7 uA52
Supply current in Standby mode IDD(Standby)ULPEN = 0; without SRAM retention; VDD = 1.8 V; 25°Ctyp 0.7 · max 1 uA52
Supply current in Standby mode IDD(Standby)ULPEN = 0; without SRAM retention; VDD = 2.4 V; 25°Ctyp 0.9 · max 1 uA52
Supply current in Standby mode IDD(Standby)ULPEN = 0; without SRAM retention; VDD = 3.0 V; 25°Ctyp 1.1 · max 1.4 uA52
Supply current in Standby mode IDD(Standby)ULPEN = 0; without SRAM retention; VDD = 3.6 V; 25°Ctyp 1.3 · max 1.5 uA52
Extra supply current to retain SRAM content ∆IDD(SRAM)SRAM retention enabled; VDD = 1.8 V; 25°C; add to IDD(Standby)typ 0.3 · max 0.4 uA53
Extra supply current to retain SRAM content ∆IDD(SRAM)SRAM retention enabled; VDD = 2.4 V; 25°C; add to IDD(Standby)typ 0.4 · max 0.9 uA53
Extra supply current to retain SRAM content ∆IDD(SRAM)SRAM retention enabled; VDD = 3.0 V; 25°C; add to IDD(Standby)typ 0.5 · max 1.3 uA53
Extra supply current to retain SRAM content ∆IDD(SRAM)SRAM retention enabled; VDD = 3.6 V; 25°C; add to IDD(Standby)typ 0.6 · max 1.3 uA53
Supply current in Shutdown mode IDD(Shutdown)RTC disabled; VDD = 1.8 V; 25°Ctyp 12 · max 250 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC disabled; VDD = 2.4 V; 25°Ctyp 18 · max 450 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC disabled; VDD = 3.0 V; 25°Ctyp 25 · max 800 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC disabled; VDD = 3.6 V; 25°Ctyp 42 · max 900 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC enabled, LSE bypass at 32.768 kHz; VDD = 1.8 V; 25°Ctyp 185 · max 850 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC enabled, LSE bypass at 32.768 kHz; VDD = 2.4 V; 25°Ctyp 265 · max 1450 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC enabled, LSE bypass at 32.768 kHz; VDD = 3.0 V; 25°Ctyp 350 · max 2350 nA53
Supply current in Shutdown mode IDD(Shutdown)RTC enabled, LSE bypass at 32.768 kHz; VDD = 3.6 V; 25°Ctyp 460 · max 3100 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE bypass at 32.768 kHz; table VDD = 1.8 V; 25°Ctyp 180 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE bypass at 32.768 kHz; table VDD = 2.4 V; 25°Ctyp 250 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE bypass at 32.768 kHz; table VDD = 3.0 V; 25°Ctyp 330 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE bypass at 32.768 kHz; table VDD = 3.6 V; 25°Ctyp 430 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE crystal at 32.768 kHz; table VDD = 1.8 V; 25°Ctyp 300 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE crystal at 32.768 kHz; table VDD = 2.4 V; 25°Ctyp 380 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE crystal at 32.768 kHz; table VDD = 3.0 V; 25°Ctyp 460 nA53
Supply current in VBAT mode IDD(VBAT)RTC enabled, LSE crystal at 32.768 kHz; table VDD = 3.6 V; 25°Ctyp 580 nA53
Supply current in VBAT mode IDD(VBAT)RTC disabled; table VDD = 1.8 V; 25°Ctyp 1 nA53
Supply current in VBAT mode IDD(VBAT)RTC disabled; table VDD = 2.4 V; 25°Ctyp 1 nA53
Supply current in VBAT mode IDD(VBAT)RTC disabled; table VDD = 3.0 V; 25°Ctyp 2 nA53
Supply current in VBAT mode IDD(VBAT)RTC disabled; table VDD = 3.6 V; 25°Ctyp 5 nA53
IOPORT BusIOPORT; Range 1typ 0.5 uA/MHz55
IOPORT BusIOPORT; Range 2typ 0.4 uA/MHz55
IOPORT BusIOPORT; Low-power run and sleeptyp 0.3 uA/MHz55
GPIOAIOPORT; Range 1typ 3.1 uA/MHz55
GPIOAIOPORT; Range 2typ 2.4 uA/MHz55
GPIOAIOPORT; Low-power run and sleeptyp 3 uA/MHz55
GPIOBIOPORT; Range 1typ 2.9 uA/MHz55
GPIOBIOPORT; Range 2typ 2.3 uA/MHz55
GPIOBIOPORT; Low-power run and sleeptyp 3 uA/MHz55
GPIOCIOPORT; Range 1typ 0.9 uA/MHz55
GPIOCIOPORT; Range 2typ 0.8 uA/MHz55
GPIOCIOPORT; Low-power run and sleeptyp 1 uA/MHz55
GPIODIOPORT; Range 1typ 0.7 uA/MHz55
GPIODIOPORT; Range 2typ 0.6 uA/MHz55
GPIODIOPORT; Low-power run and sleeptyp 1 uA/MHz55
GPIOFIOPORT; Range 1typ 0.5 uA/MHz55
GPIOFIOPORT; Range 2typ 0.5 uA/MHz55
GPIOFIOPORT; Low-power run and sleeptyp 1 uA/MHz55
Bus matrixAHB; Range 1typ 3.2 uA/MHz55
Bus matrixAHB; Range 2typ 2.2 uA/MHz55
Bus matrixAHB; Low-power run and sleeptyp 2.8 uA/MHz55
All AHB PeripheralsAHB; Range 1typ 9.8 uA/MHz55
All AHB PeripheralsAHB; Range 2typ 8.2 uA/MHz55
All AHB PeripheralsAHB; Low-power run and sleeptyp 8.5 uA/MHz55
DMA1/DMAMUXAHB; Range 1typ 3.4 uA/MHz55
DMA1/DMAMUXAHB; Range 2typ 2.9 uA/MHz55
DMA1/DMAMUXAHB; Low-power run and sleeptyp 3 uA/MHz55
CRCAHB; Range 1typ 0.5 uA/MHz55
CRCAHB; Range 2typ 0.4 uA/MHz55
CRCAHB; Low-power run and sleeptyp 0.5 uA/MHz55
FLASHAHB; Range 1typ 4.3 uA/MHz55
FLASHAHB; Range 2typ 3.6 uA/MHz55
FLASHAHB; Low-power run and sleeptyp 3.5 uA/MHz55
All APB peripheralsAPB; Range 1typ 23.5 uA/MHz55
All APB peripheralsAPB; Range 2typ 20 uA/MHz55
All APB peripheralsAPB; Low-power run and sleeptyp 20.5 uA/MHz55
AHB to APB bridgeAPB; Range 1typ 0.2 uA/MHz55
AHB to APB bridgeAPB; Range 2typ 0.2 uA/MHz55
AHB to APB bridgeAPB; Low-power run and sleeptyp 0.1 uA/MHz55
PWRAPB; Range 1typ 0.4 uA/MHz55
PWRAPB; Range 2typ 0.3 uA/MHz55
PWRAPB; Low-power run and sleeptyp 0.5 uA/MHz55
SYSCFG/VREFBUFAPB; Range 1typ 0.4 uA/MHz55
SYSCFG/VREFBUFAPB; Range 2typ 0.4 uA/MHz55
SYSCFG/VREFBUFAPB; Low-power run and sleeptyp 0.5 uA/MHz55
WWDGAPB; Range 1typ 0.2 uA/MHz55
WWDGAPB; Range 2typ 0.3 uA/MHz55
WWDGAPB; Low-power run and sleeptyp 0.5 uA/MHz55
TIM1APB; Range 1typ 7 uA/MHz55
TIM1APB; Range 2typ 5.9 uA/MHz55
TIM1APB; Low-power run and sleeptyp 6.5 uA/MHz55
TIM2APB; Range 1typ 4.7 uA/MHz55
TIM2APB; Range 2typ 3.8 uA/MHz55
TIM2APB; Low-power run and sleeptyp 3.5 uA/MHz55
TIM3APB; Range 1typ 3.6 uA/MHz55
TIM3APB; Range 2typ 3.1 uA/MHz55
TIM3APB; Low-power run and sleeptyp 3.5 uA/MHz55
TIM14APB; Range 1typ 1.5 uA/MHz55
TIM14APB; Range 2typ 1.3 uA/MHz55
TIM14APB; Low-power run and sleeptyp 1.5 uA/MHz55
TIM16APB; Range 1typ 2.3 uA/MHz55
TIM16APB; Range 2typ 2 uA/MHz55
TIM16APB; Low-power run and sleeptyp 2.5 uA/MHz55
TIM17APB; Range 1typ 1 uA/MHz55
TIM17APB; Range 2typ 0.8 uA/MHz55
TIM17APB; Low-power run and sleeptyp 0.3 uA/MHz55
LPTIM1APB; Range 1typ 3.1 uA/MHz55
LPTIM1APB; Range 2typ 2.7 uA/MHz55
LPTIM1APB; Low-power run and sleeptyp 3 uA/MHz55
LPTIM2APB; Range 1typ 2.7 uA/MHz55
LPTIM2APB; Range 2typ 2.3 uA/MHz55
LPTIM2APB; Low-power run and sleeptyp 2.5 uA/MHz55
I2C1APB; Range 1typ 3.2 uA/MHz56
I2C1APB; Range 2typ 2.7 uA/MHz56
I2C1APB; Low-power run and sleeptyp 3 uA/MHz56
I2C2APB; Range 1typ 0.7 uA/MHz56
I2C2APB; Range 2typ 0.6 uA/MHz56
I2C2APB; Low-power run and sleeptyp 1 uA/MHz56
SPI1APB; Range 1typ 2.2 uA/MHz56
SPI1APB; Range 2typ 1.8 uA/MHz56
SPI1APB; Low-power run and sleeptyp 2 uA/MHz56
SPI2APB; Range 1typ 1.3 uA/MHz56
SPI2APB; Range 2typ 1.1 uA/MHz56
SPI2APB; Low-power run and sleeptyp 1.5 uA/MHz56
USART1APB; Range 1typ 6.6 uA/MHz56
USART1APB; Range 2typ 5.6 uA/MHz56
USART1APB; Low-power run and sleeptyp 6 uA/MHz56
USART2APB; Range 1typ 1.8 uA/MHz56
USART2APB; Range 2typ 1.5 uA/MHz56
USART2APB; Low-power run and sleeptyp 2 uA/MHz56
LPUART1APB; Range 1typ 4.3 uA/MHz56
LPUART1APB; Range 2typ 3.5 uA/MHz56
LPUART1APB; Low-power run and sleeptyp 4 uA/MHz56
ADCAPB; Range 1typ 1.6 uA/MHz56
ADCAPB; Range 2typ 1.5 uA/MHz56
ADCAPB; Low-power run and sleeptyp 1.5 uA/MHz56
Wakeup time from Sleep to Run mode tWUSLEEP-typ 11 · max 11 CPU cycles56
Wakeup time from Low-power sleep mode tWULPSLEEPTransiting to Low-power-run-mode execution in Flash memory not powered in Low-power sleep mode; HCLK = HSI16 / 8 = 2 MHztyp 11 · max 14 CPU cycles56
Wakeup time from Stop 0 tWUSTOP0Transiting to Run-mode execution in Flash memory not powered in Stop 0 mode; HCLK = HSI16 = 16 MHz; Regulator in Range 1 or Range 2typ 5.6 · max 6 us56
Wakeup time from Stop 0 tWUSTOP0Transiting to Run-mode execution in SRAM or in Flash memory powered in Stop 0 mode; HCLK = HSI16 = 16 MHz; Regulator in Range 1 or Range 2typ 2 · max 2.4 us56
Wakeup time from Stop 1 tWUSTOP1Run-mode execution in Flash memory not powered in Stop 1; HCLK = HSI16 = 16 MHz; regulator Range 1 or Range 2typ 9 · max 11.2 us57
Wakeup time from Stop 1 tWUSTOP1Run-mode execution in SRAM or Flash memory powered in Stop 1; HCLK = HSI16 = 16 MHz; regulator Range 1 or Range 2typ 5 · max 7.5 us57
Wakeup time from Stop 1 tWUSTOP1Low-power-run-mode execution in Flash memory not powered in Stop 1; HCLK = HSI16/8 = 2 MHz; regulator in low-power mode, LPR = 1 in PWR_CR1typ 22 · max 25.3 us57
Wakeup time from Stop 1 tWUSTOP1Low-power-run-mode execution in SRAM or Flash memory powered in Stop 1; HCLK = HSI16/8 = 2 MHz; regulator in low-power mode, LPR = 1 in PWR_CR1typ 18 · max 23.5 us57
Wakeup time from Standby mode tWUSTBYTransiting to Run mode; HCLK = HSI16 = 16 MHz; regulator in Range 1typ 14.5 · max 30 us57
Wakeup time from Shutdown mode tWUSHDNTransiting to Run mode; HCLK = HSI16 = 16 MHz; regulator in Range 1typ 258 · max 340 us57
Wakeup time from Low-power run mode tWULPRUNTransiting to Run mode; HSISYS = HSI16/8 = 2 MHz; time until REGLPF flag is cleared in PWR_SR2typ 5 · max 7 us57
Transition times between regulator Range 1 and Range 2 tVOSTHSISYS = HSI16; time until VOSF flag is cleared in PWR_SR2typ 20 · max 40 us57
Wakeup time needed to calculate the maximum LPUART baud rate allowing to wakeup up from Stop mode when LPUART clock source is HSI16 tWULPUARTStop mode 0max 1.7 us57
Wakeup time needed to calculate the maximum LPUART baud rate allowing to wakeup up from Stop mode when LPUART clock source is HSI16 tWULPUARTStop mode 1max 8.5 us57
Oscillator frequency fOSC_INmin 4 · typ 8 · max 48 MHz60
Feedback resistor RFtyp 200 kΩ60
HSE current consumption IDD(HSE)During startup; first 2/3 of tSU(HSE)max 5.5 mA60
HSE current consumption IDD(HSE)VDD = 3 V, Rm = 30 Ω, CL = 10 pF@8 MHztyp 0.58 mA60
HSE current consumption IDD(HSE)VDD = 3 V, Rm = 45 Ω, CL = 10 pF@8 MHztyp 0.59 mA60
HSE current consumption IDD(HSE)VDD = 3 V, Rm = 30 Ω, CL = 5 pF@48 MHztyp 0.89 mA60
HSE current consumption IDD(HSE)VDD = 3 V, Rm = 30 Ω, CL = 10 pF@48 MHztyp 1.14 mA60
HSE current consumption IDD(HSE)VDD = 3 V, Rm = 30 Ω, CL = 20 pF@48 MHztyp 1.94 mA60
Maximum critical crystal transconductance GmStartupmax 1.5 mA/V60
Startup time tSU(HSE)VDD is stabilizedtyp 2 ms60
LSE current consumption IDD(LSE)LSEDRV[1:0] = 00, Low drive capabilitytyp 250 nA61
LSE current consumption IDD(LSE)LSEDRV[1:0] = 01, Medium low drive capabilitytyp 315 nA61
LSE current consumption IDD(LSE)LSEDRV[1:0] = 10, Medium high drive capabilitytyp 500 nA61
LSE current consumption IDD(LSE)LSEDRV[1:0] = 11, High drive capabilitytyp 630 nA61
Maximum critical crystal gm GmcritmaxLSEDRV[1:0] = 00, Low drive capabilitymax 0.5 uA/V61
Maximum critical crystal gm GmcritmaxLSEDRV[1:0] = 01, Medium low drive capabilitymax 0.75 uA/V61
Maximum critical crystal gm GmcritmaxLSEDRV[1:0] = 10, Medium high drive capabilitymax 1.7 uA/V61
Maximum critical crystal gm GmcritmaxLSEDRV[1:0] = 11, High drive capabilitymax 2.7 uA/V61
Startup time tSU(LSE)VDD is stabilizedtyp 2 s61
HSI16 Frequency fHSI16VDD=3.0 V, TA=30 °Cmin 15.88 · max 16.08 MHz62
HSI16 oscillator frequency drift over temperature ∆Temp(HSI16)TA= 0 to 85 °Cmin -1 · max 1 %62
HSI16 oscillator frequency drift over temperature ∆Temp(HSI16)TA= -40 to 125 °Cmin -2 · max 1.5 %62
HSI16 oscillator frequency drift over VDD ∆VDD(HSI16)VDD=1.62 V to 3.6 Vmin -0.1 · max 0.05 %62
HSI16 frequency user trimming step TRIMFrom code 127 to 128min -8 · typ -6 · max -4 %62
HSI16 frequency user trimming step TRIMFrom code 63 to 64; From code 191 to 192min -5.8 · typ -3.8 · max -1.8 %62
HSI16 frequency user trimming step TRIMFor all other code incrementsmin 0.2 · typ 0.3 · max 0.4 %62
Bank (64 Kbyte) programming time tprog_bankNormal programmingtyp 0.7 · max 1.2 s65
Bank (64 Kbyte) programming time tprog_bankFast programmingtyp 0.4 · max 0.7 s65
Mass erase time tMEtyp 22.1 · max 40.1 ms65
Average consumption from VDD IDD(FlashA)Programmingtyp 3 mA65
Average consumption from VDD IDD(FlashA)Page erasetyp 3 mA65
Average consumption from VDD IDD(FlashA)Mass erasetyp 5 mA65
Maximum current (peak) IDD(FlashP)Programming, 2 us peak durationtyp 7 mA65
Maximum current (peak) IDD(FlashP)Erase, 41 us peak durationtyp 7 mA65
Endurance NENDTA = -40 to +105 °Cmin 10 kcycles65
Data retention tRET1 kcycle at TA = 85 °Cmin 30 Years65
Data retention tRET1 kcycle at TA = 105 °Cmin 15 Years65
Data retention tRET1 kcycle at TA = 125 °Cmin 7 Years65
Data retention tRET10 kcycles at TA = 55 °Cmin 30 Years65
Data retention tRET10 kcycles at TA = 85 °Cmin 15 Years65
Data retention tRET10 kcycles at TA = 105 °Cmin 10 Years65
Electrostatic discharge voltage (human body model) VESD(HBM)TA = +25 °C, conforming to ANSI/ESDA/JEDEC JS-001; Class 1Cmax 1000 V67
Electrostatic discharge voltage (charge device model) VESD(CDM)TA = +25 °C, conforming to ANSI/ESDA/JEDEC JS-002; Class C2amax 500 V67
Output low level voltage for an I/O pin VOLCMOS port; |IIO| 6 mA; VDDIO1 ≥ 2.7 Vmax 0.4 V72
Output low level voltage for an I/O pin VOLTTL port; |IIO| = 6 mA; VDDIO1 ≥ 2.7 Vmax 0.4 V72
Output high level voltage for an I/O pin VOHTTL port; |IIO| = 6 mA; VDDIO1 ≥ 2.7 Vmin 2.4 V72
Output low level voltage for an I/O pin VOLAll I/Os; |IIO| = 15 mA; VDDIO1 ≥ 2.7 Vmax 1.3 V72
Output low level voltage for an I/O pin VOL|IIO| = 3 mA; VDDIO1 ≥ 1.62 Vmax 0.4 V72
Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with _f option) VOLFM+|IIO| = 20 mA; VDDIO1 ≥ 2.7 Vmax 0.4 V72
Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with _f option) VOLFM+|IIO| = 9 mA; VDDIO1 ≥ 1.62 Vmax 0.4 V72
Maximum frequency FmaxSpeed 01; C=50 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 Vmax 10 MHz73
Maximum frequency FmaxSpeed 01; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 Vmax 2 MHz73
Maximum frequency FmaxSpeed 01; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 Vmax 15 MHz73
Maximum frequency FmaxSpeed 01; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 Vmax 2.5 MHz73
Output rise and fall time Tr/TfSpeed 01; C=50 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 Vmax 30 ns73
Output rise and fall time Tr/TfSpeed 01; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 Vmax 60 ns73
Output rise and fall time Tr/TfSpeed 01; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 Vmax 15 ns73
Output rise and fall time Tr/TfSpeed 01; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 Vmax 30 ns73
Maximum frequency FmaxSpeed 10; C=50 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 Vmax 30 MHz73
Maximum frequency FmaxSpeed 10; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 Vmax 15 MHz73
Maximum frequency FmaxSpeed 10; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 Vmax 60 MHz73
Maximum frequency FmaxSpeed 10; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 Vmax 30 MHz73
Output rise and fall time Tr/TfSpeed 10; C=50 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 Vmax 11 ns73
Output rise and fall time Tr/TfSpeed 10; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 Vmax 22 ns73
Output rise and fall time Tr/TfSpeed 10; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 Vmax 4 ns73
Output rise and fall time Tr/TfSpeed 10; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 Vmax 8 ns73
Maximum frequency FmaxSpeed 11; C=30 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 Vmax 60 MHz73
Maximum frequency FmaxSpeed 11; C=30 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 Vmax 30 MHz73
Maximum frequency FmaxSpeed 11; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V; I/O capability, maximum system frequency limited to 64 MHzmax 80 MHz73
Maximum frequency FmaxSpeed 11; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 Vmax 40 MHz73
Output rise and fall time Tr/TfSpeed 11; C=30 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 Vmax 5.5 ns73
Output rise and fall time Tr/TfSpeed 11; C=30 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 Vmax 11 ns73
Output rise and fall time Tr/TfSpeed 11; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 Vmax 2.5 ns73
Output rise and fall time Tr/TfSpeed 11; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 Vmax 5 ns73
Maximum frequency FmaxFm+; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 3.6 Vmax 1 MHz73
Output fall time TfFm+; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 3.6 V; measured between 70% and 30%max 5 ns73
NRST Schmitt trigger voltage hysteresis Vhys(NRST)typ 200 mV74
Weak pull-up equivalent resistor RPUVIN = VSSmin 25 · typ 40 · max 55 kΩ74
NRST input filtered pulse VF(NRST)max 70 ns74
NRST input not filtered pulse VNF(NRST)1.7 V ≤ VDD ≤ 3.6 Vmin 350 ns74
Supply voltage VDDmin 1.62 · max 3.6 V75
Booster startup time tSU(BOOST)max 240 us75
Booster consumption IDD(BOOST)1.62 V ≤ VDD ≤ 2.0 Vmax 250 uA75
Booster consumption IDD(BOOST)2.0 V ≤ VDD ≤ 2.7 Vmax 500 uA75
Booster consumption IDD(BOOST)2.7 V ≤ VDD ≤ 3.6 Vmax 900 uA75
Analog supply voltage VDDAmin 1.62 · max 3.6 V75
Positive reference voltage VREF+VDDA ≥ 2 V; maximum = VDDAmin 2 V75
Total conversion time (including sampling time) tCONVfADC = 35 MHz; Resolution = 12 bitsmin 0.4 · max 4.95 us77
Laps of time allowed between two conversions without rearm tIDLEmax 100 us77
ADC consumption from VDDA IDDA(ADC)fs = 2.5 MSpstyp 410 uA77
ADC consumption from VDDA IDDA(ADC)fs = 1 MSpstyp 164 uA77
ADC consumption from VDDA IDDA(ADC)fs = 10 kSpstyp 17 uA77
ADC consumption from VREF+ IDDV(ADC)fs = 2.5 MSpstyp 65 uA77
ADC consumption from VREF+ IDDV(ADC)fs = 1 MSpstyp 26 uA77
ADC consumption from VREF+ IDDV(ADC)fs = 10 kSpstyp 0.26 uA77
Max. RAIN RAIN12 bits; sampling cycle at 35 MHz = 1.5; sampling time = 43 nsmax 50 Ω77
Max. RAIN RAIN12 bits; sampling cycle at 35 MHz = 3.5; sampling time = 100 nsmax 680 Ω77
Max. RAIN RAIN12 bits; sampling cycle at 35 MHz = 7.5; sampling time = 214 nsmax 2200 Ω77
Max. RAIN RAIN12 bits; sampling cycle at 35 MHz = 12.5; sampling time = 357 nsmax 4700 Ω77
Max. RAIN RAIN12 bits; sampling cycle at 35 MHz = 19.5; sampling time = 557 nsmax 8200 Ω77
Max. RAIN RAIN12 bits; sampling cycle at 35 MHz = 39.5; sampling time = 1129 nsmax 15000 Ω77
Max. RAIN RAIN12 bits; sampling cycle at 35 MHz = 79.5; sampling time = 2271 nsmax 33000 Ω77
Max. RAIN RAIN12 bits; sampling cycle at 35 MHz = 160.5; sampling time = 4586 nsmax 50000 Ω77
Line regulation Iline_reg2.8 V ≤ VDDA ≤ 3.6 V; Iload = 500 uAtyp 200 · max 1000 ppm/V83
Line regulation Iline_reg2.8 V ≤ VDDA ≤ 3.6 V; Iload = 4 mAtyp 100 · max 500 ppm/V83
Load regulation Iload_reg500 uA ≤ Iload ≤4 mA; Normal modetyp 50 · max 500 ppm/mA83
Temperature coefficient of VREFBUF TCoeff_vrefbuf-40 °C < TJ < +125 °Cmax 50 ppm/ °C83
Power supply rejection PSRRDCmin 40 · typ 60 dB83
Power supply rejection PSRR100 kHzmin 25 · typ 40 dB83
Start-up time tSTARTCL = 0.5 uF; capacitive load includes a 100 nF capacitortyp 300 · max 350 us83
Start-up time tSTARTCL = 1.1 uF; capacitive load includes a 100 nF capacitortyp 500 · max 650 us83
Start-up time tSTARTCL = 1.5 uF; capacitive load includes a 100 nF capacitortyp 650 · max 800 us83
Control of maximum DC current drive on VREFBUF_OUT during start-up phase IINRUSHtyp 8 mA83
VREFBUF consumption from VDDA IDDA(VREFBUF)Iload = 0 uAtyp 16 · max 25 uA83
VREFBUF consumption from VDDA IDDA(VREFBUF)Iload = 500 uAtyp 18 · max 30 uA83
VREFBUF consumption from VDDA IDDA(VREFBUF)Iload = 4 mAtyp 35 · max 50 uA83
VTS linearity with temperature TLTyp ±1 °C; Max ±2 °Ctyp 1 · max 2 °C83
Average slope Avg_Slopemin 2.3 · typ 2.5 · max 2.7 mV/°C83
Voltage at 30°C (±5 °C) V30min 0.742 · typ 0.76 · max 0.785 V83
Sensor Buffer Start-up time in continuous mode tSTART(TS_BUF)typ 8 · max 15 us83
Start-up time when entering in continuous mode tSTARTtyp 70 · max 120 us83

Open-source boards using it

13See all 13
  • 4 layers97 × 87 mmSprocket panel, the printed circuit board in 3D

    Sprocket panel

    jamesmunns/brick-mount

    Put your circuits on your plastic bricks of choice

    494 parts40
  • 2 layers53.4 × 84.4 mmPCB business cards, the printed circuit board in 3D

    PCB business cards

    ExcessiveOverkill/PCB-business-cards

    Everything needed to make your own persistence of vision business cards

    70 parts3
  • 4 layers49 × 34 mmC92 decoder A1, the printed circuit board in 3D

    C92 decoder A1

    slonket/c92-decoder

    An MM1/MM2/Lenz decoder for classic Märklin locomotives and the pre-mfx digital systems.

    93 partsCERN-OHL-S-2.0
  • 4 layers47 × 15 mmSprocket, the printed circuit board in 3D

    Sprocket

    jamesmunns/brick-mount

    Put your circuits on your plastic bricks of choice

    35 parts40
  • 2 layers38 × 44.6 mmM3-V5, the printed circuit board in 3D

    M3-V5

    tomrodinger/servomotor

    Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.

    71 parts17MIT
  • 2 layers38 × 56.5 mmServomotorStepper V2I1, the printed circuit board in 3D

    ServomotorStepper V2I1

    tomrodinger/servomotor

    Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.

    70 parts17MIT
  • 4 layers18.7 × 19.5 mmSAU G0, the printed circuit board in 3D

    SAU G0

    oldgerman/SAU-G0

    迷你低功耗温湿度计,可定时自动唤醒记录数据保存并串口导出文本表格

    95 parts5

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the STM32G031G8U6?

Yes. The symbol is MCU_ST_STM32G0:STM32G031G8Ux and the footprint Package_DFN_QFN:QFN-28_4x4mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the STM32G031G8U6?

UFQFPN-28(4x4), with 28 pins. Its footprint is drawn on this page.

Where is the STM32G031G8U6 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the STM32G031G8U6?

JLCPCB lists it as part C432211, with 8,418 in stock; the sellers' links on this page open their listings.

What can replace the STM32G031G8U6?

Parts like it in the library: the STM32G031G6U6 by STMicroelectronics, the STM32C071GBU6N by STMicroelectronics, the STM32G041G8U6 by STMicroelectronics and the STM32G071GBU6N by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the STM32G031G8U6?

13 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.