2 layers97 × 99 mm
Proto quarter panel
jamesmunns/brick-mount
Put your circuits on your plastic bricks of choice
188 parts40
4 layers97 × 87 mm
Sprocket panel
jamesmunns/brick-mount40Put your circuits on your plastic bricks of choice
- Size
- 97 × 87 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 494
- Nets
- 380
- Pads
- 1,674
- Tracks, vias
- 4,660, 670
- Pours
- 50
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Jan 2021
- Updated
- 22 Apr 2022
Overview
Sprocket panel is an open-source printed circuit board by jamesmunns, from the jamesmunns/brick-mount repository on GitHub. It is a 4-layer board of 97 × 87 mm with 494 parts on 380 nets, routed with 4,660 tracks and 670 vias.
It is built around the STM32G031G8U6, AP2210N-3.3TRG1 and B5819W, with the NX7002BKR among its other parts. Its parts include 70 capacitors, 70 resistors, 60 diodes, 50 connectors and 20 ICs. It belongs with the STM32 boards of this library.
Main components
4
STM32G031G8U6
UFQFPN-28(4x4)-40℃~+85℃ 1.7V~3.6V 12bit 26 32 Bit 64KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH UFQFPN-28(4x4) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
AP2210N-3.3TRG1
SOT-23-40℃~+125℃@(Tj) 1 13.2V 1uA 250mV@(300mA) 3.3V 300mA 75dB@(100Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
B5819W
SOD-123-55℃~+125℃ 1.5A 1mA@40V 25A 40V 600mV@1A Standalone SOD-123 Schottky Diodes ROHSMDDSchottky DiodesNX7002BKR
SOT-23-55℃~+150℃ 1 N-channel 1nC@10V 2.1V 2.8Ω@10V 23.6pF 270mA 310mW 3pF 60V SOT-23 MOSFETs ROHSNexperiaMOSFETs
README
README.mdBrick Boards
Boards designed to be compatible with LEGO and other plastic building blocks.
There are KiCAD footprints for a variety of different brick arrangements in the parts folder. I've also included a number of personal projects using these footprints in the boards/ folder.
LICENSE
The contents of the parts/brick-4_9id-6_0od.pretty/ folder are licensed under a CC0 license.
Parts
494| Qty | Value | Footprint | References |
|---|---|---|---|
| 50 | 1K | Resistor_SMD:R_0402_1005Metric | R4, R4, R4, R4, R4, R4, R4, R4, R4, R4, R5, R5, R5, R5, R5, R5 +34 |
| 30 | 1uF | Capacitor_SMD:C_0402_1005Metric | C4, C4, C4, C4, C4, C4, C4, C4, C4, C4, C6, C6, C6, C6, C6, C6 +14 |
| 30 | LED | Diode_SMD:D_0603_1608Metric | D4, D4, D4, D4, D4, D4, D4, D4, D4, D4, D5, D5, D5, D5, D5, D5 +14 |
| 20 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C2, C2, C2, C2, C2, C2 +4 |
| 20 | 10K | Resistor_SMD:R_0402_1005Metric | R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R3, R3, R3, R3, R3, R3 +4 |
| 20 | Conn_01x02 | brick-4_9id-6_0od:brick-1x2 | MH1, MH1, MH1, MH1, MH1, MH1, MH1, MH1, MH1, MH1, MH2, MH2, MH2, MH2, MH2, MH2 +4 |
| 20 | Conn_01x04_MountingPin | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J4, J4, J4, J4, J4, J4, J4, J4, J4, J4, J6, J6, J6, J6, J6, J6 +4 |
| 20 | Conn_01x04_MountingPin | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J5, J5, J5, J5, J5, J5, J5, J5, J5, J5, J7, J7, J7, J7, J7, J7 +4 |
| 20 | SW_Push | Everything:K2-1808SN-A4SW-01 | SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW1, SW2, SW2, SW2, SW2, SW2, SW2 +4 |
| 20 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3, JP3, JP3, JP3, JP3, JP3, JP3, JP3, JP3, JP3, JP4, JP4, JP4, JP4, JP4, JP4 +4 |
| 20 | TC3838RGB | Everything:TC3838RGB | D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D3, D3, D3, D3, D3, D3 +4 |
| 10 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C5, C5, C5, C5, C5, C5, C5, C5, C5, C5 |
| 10 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C3, C3, C3, C3, C3, C3, C3, C3, C3, C3 |
| 10 | AP2210N-3.3TRG1 | Package_TO_SOT_SMD:SOT-23 | U2, U2, U2, U2, U2, U2, U2, U2, U2, U2 |
| 10 | B5819W | Diode_SMD:D_SOD-123 | D1, D1, D1, D1, D1, D1, D1, D1, D1, D1 |
| 10 | NX7002BKR | Package_TO_SOT_SMD:SOT-23 | Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1 |
| 10 | SPROCKET-CONN | Everything:sprocket-pins | J1, J1, J1, J1, J1, J1, J1, J1, J1, J1 |
| 10 | STM32G031G8U6 | footprints:STM32G031G8U6 | U1, U1, U1, U1, U1, U1, U1, U1, U1, U1 |
| 10 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1, TP1 |
The 350 most common of 494 parts.
More from jamesmunns/brick-mount
12- 2 layers95.5 × 127.5 mm
- 4 layers34 × 47.5 mm
- 2 layers97 × 95 mm
Proto half cables panel
jamesmunns/brick-mount
Put your circuits on your plastic bricks of choice
116 parts40 - 4 layers15.5 × 47.5 mm
- 2 layers47 × 47 mm
- 2 layers63.5 × 95.5 mm
- 2 layers47 × 95 mm
- 4 layers47 × 15 mm
- 2 layers79 × 47 mm
Black pill breakout
jamesmunns/brick-mount
Put your circuits on your plastic bricks of choice
27 parts40 - 2 layers47 × 31 mm
- 2 layers47.5 × 63.5 mm
Similar boards
- 2 layers47.4 × 44.4 mm
- 2 layers64 × 55.2 mm
- 2 layers35.5 × 35.3 mm
- 2 layers53.4 × 84.4 mm
PCB business cards
ExcessiveOverkill/PCB-business-cards
Everything needed to make your own persistence of vision business cards
70 parts3 - 4 layers49 × 34 mm
C92 decoder A1
slonket/c92-decoder
An MM1/MM2/Lenz decoder for classic Märklin locomotives and the pre-mfx digital systems.
93 partsCERN-OHL-S-2.0 - 2 layers38 × 44.6 mm
M3-V5
tomrodinger/servomotor
Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.
71 parts17MIT - 4 layers18.7 × 19.5 mm
- 2 layers45 × 29.4 mm
/ControlPanelSTM32QFN28/ControlPanelSTM32QFN28.kicad_pcb.jpg?size=s&soon)
Questions
How big is the Sprocket panel PCB?
It measures 97 × 87 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Sprocket panel use?
494 parts, built around the STM32G031G8U6, AP2210N-3.3TRG1, B5819W and NX7002BKR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sprocket panel KiCad files?
From the jamesmunns/brick-mount repository on GitHub, at the commit this page was made from: the board is boards/sprocket/sprocket-panel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sprocket panel design in my own project?
Its repository states no licence, so its author keeps all rights: ask jamesmunns before reusing the design.