2 layers47.4 × 44.4 mm
Pulseox breakout LCD PCB
IRNAS/pulseox-hardware
All our projects are as usefully open-source as possible.
20 parts5
2 layers47.4 × 44.4 mm
Pulseox
IRNAS/pulseox-hardware5All our projects are as usefully open-source as possible.
- Size
- 47.4 × 44.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 31
- Pads
- 120
- Tracks, vias
- 271, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Apr 2017
- Updated
- 18 Jul 2018
Overview
Pulseox is an open-source printed circuit board by IRNAS, from the IRNAS/pulseox-hardware repository on GitHub. It is a 2-layer board of 47.4 × 44.4 mm with 36 parts on 31 nets, routed with 271 tracks and 0 vias.
It is built around the MCP73831, AT-2440-TWT-R and NX7002BKR, with the OS102011MA1QS1 among its other parts. Its parts include 7 resistors, 7 connectors, 5 capacitors, 3 ICs and 3 switches. It belongs with the STM32 boards of this library.
Main components
4
MCP73831
UncategorisedMicrochip TechnologyAT-2440-TWT-R
插件,D=24mm-20℃~+60℃ 1V~30V 24mm 4kHz 7.7mm 80dB Passive (Externally Driven) Piezoelectric 插件,D=24mm Buzzers ROHSPUI Audio, Inc.Buzzers
NX7002BKR
SOT-23-55℃~+150℃ 1 N-channel 1nC@10V 2.1V 2.8Ω@10V 23.6pF 270mA 310mW 3pF 60V SOT-23 MOSFETs ROHSNexperiaMOSFETs
OS102011MA1QS1
插件-30℃~+70℃ 10,000 cycles 100mA 12V 8.4mm PC Pin Rectangular Columnar SPDT 插件 Slide Switches ROHSC&KSlide Switches
README
README.mdpulseox-hardware
License
All our projects are as usefully open-source as possible.
Hardware including documentation is licensed under CERN OHL v.1.2. license
Firmware and software originating from the project is licensed under GNU GENERAL PUBLIC LICENSE v3.
Open data generated by our projects is licensed under CC0.
All our websites and additional documentation are licensed under [Creative Commons Attribution-ShareAlike 4 .0 Unported License] (https://creativecommons.org/licenses/by-sa/4.0/legalcode).
What this means is that you can use hardware, firmware, software and documentation without paying a royalty and knowing that you'll be able to use your version forever. You are also free to make changes but if you share these changes then you have to do so on the same conditions that you enjoy.
Koruza, GoodEnoughCNC and IRNAS are all names and marks of Institut IRNAS Rače. You may use these names and terms only to attribute the appropriate entity as required by the Open Licences referred to above. You may not use them in any other way and in particular you may not use them to imply endorsement or authorization of any hardware that you design, make or sell.
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Mounting_Hole | Mounting_Holes:MountingHole_3.2mm_M3_ISO7380 | MK1, MK2, MK3, MK4 |
| 3 | 10K | Resistors_SMD:R_0805 | R4, R6, R7 |
| 3 | TEST | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP1, TP2, TP3 |
| 2 | 100nF/16V | Capacitors_SMD:C_0805 | C2, C16 |
| 2 | 1uF/16V | Capacitors_SMD:C_0805 | C3, C4 |
| 2 | SW_Push | Switches:SWITCH TACTILE SPST-NO 0.05A 12V | SW2, SW4 |
| 1 | 10K | Resistors_SMD:R_0603 | R1 |
| 1 | 10uF/16V | Capacitors_SMD:C_0805 | C1 |
| 1 | 1K | Resistors_SMD:R_0603 | R2 |
| 1 | 47K | Resistors_SMD:R_0805 | R5 |
| 1 | 4K7 | Resistors_SMD:R_0805 | R3 |
| 1 | AT-2440-TWT-R | Electromechanical:AT-2440-TWT-R | BUZ1 |
| 1 | CON3 | Connectors:RJ45_8 | J3 |
| 1 | Header 4 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | P1 |
| 1 | Header8 | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | P2 |
| 1 | Jumper_NO_Small | Jumpers:SMT-JUMPER_2_NO_SILK | J2 |
| 1 | Jumper_NO_Small | Resistors_SMD:R_0805 | J1 |
| 1 | LED | LEDs:LED_0603 | D1 |
| 1 | MCP1700-3002E_SOT23 | TO_SOT_Packages_SMD:SOT-23 | U2 |
| 1 | MCP73831 | Silicon-Standard:SOT23-5 | U1 |
| 1 | NX7002BK | SOT65P210X110-3N:SOT65P210X110-3N | T1 |
| 1 | OS102011MA1QS1 | rascalmicro-kicad-footprints:OS102011MA1QS1 | SW1 |
| 1 | STM32F030F4Px | Housings_SSOP:TSSOP-20_4.4x6.5mm_Pitch0.65mm | U3 |
| 1 | TerminalBlock3.5mm | TerminalBlocks_Phoenix:TerminalBlock_Phoenix_PT-3.5mm_2pol | CON2 |
| 1 | USB_OTG | Connectors_USB:USB_Micro-B_Molex-105017-0001 | CON1_MICROUSB1 |
The 35 most common of 36 parts.
More from IRNAS/pulseox-hardware
3- 2 layers10 × 8 mm
Pulseox clamp led PCB
IRNAS/pulseox-hardware
All our projects are as usefully open-source as possible.
5 parts5 - 2 layers10 × 8 mm
Pulseox clamp PCB
IRNAS/pulseox-hardware
All our projects are as usefully open-source as possible.
2 parts5
Similar boards
- 4 layers97 × 87 mm
- 2 layers64 × 55.2 mm
- 2 layers35.5 × 35.3 mm
- 2 layers96 × 74 mm
MacroController
alex1klimovich/nrf52840-macro-controller
Custom nRF52840 productivity controller for digital artists — PCB, BLE/USB firmware, OLED, haptics, RGB, and enclosure CAD.
78 parts1 - 2 layers135.3 × 78.4 mm
Mseq
MF-Room/mseq_pcb
KiCad 10 hardware design for MSeq embedded, the microcontroller implementation of the MSeq MIDI sequencer.
93 parts1CERN-OHL-S-2.0 - 2 layers18.5 × 31.6 mm
- 2 layers66 × 133.4 mm
1001016-001-10-01 PinJammer V01
pinqin/PinJammerV01
This file documents the hardware of PCB 1001016-001-10-01PinJammerV01, including a consolidated bill of materials.
72 parts - 2 layers35 × 38.4 mm
Handgelenk
Jeija/esp8266-smartwatch
ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...
61 parts233
Questions
How big is the Pulseox PCB?
It measures 47.4 × 44.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pulseox use?
36 parts, built around the MCP73831, AT-2440-TWT-R, NX7002BKR and OS102011MA1QS1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pulseox KiCad files?
From the IRNAS/pulseox-hardware repository on GitHub, at the commit this page was made from: the board is Kicad/pulseox-main-PCB/pulseox.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pulseox design in my own project?
Its repository states no licence, so its author keeps all rights: ask IRNAS before reusing the design.