Skip to the content

STM32F105RCT6

STMicroelectronicsExtended

-40℃~+85℃ 12bit 12bit 256KB 2V~3.6V 32 Bit 51 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS

Part id
st/STM32F105RCT6
Category
Microcontrollers (MCU, MPU, SOC)
Package
LQFP-64(10x10)
Pins
64
In stock
5,989 at JLCPCB (C8345)
Used on
5 open-source boards

Overview

The STM32F105RCT6 is a microcontroller made by STMicroelectronics in a LQFP-64(10x10) package with 64 pins. -40℃~+85℃ 12bit 12bit 256KB 2V~3.6V 32 Bit 51 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_ST_STM32F1:STM32F105RCTx, from KiCad's library) and its footprint (Package_QFP:LQFP-64_10x10mm_P0.5mm, from KiCad's library), ready for a KiCad board. 5,989 are in stock at JLCPCB (part C8345). 5 open-source boards in 3 repositories on GitHub use it.

Symbol

1VBAT2PC133PC144PC155PD06PD17NRST8PC09PC110PC211PC312VSSA13VDDA14PA015PA116PA217PA318VSS19VDD20PA421PA522PA623PA724PC425PC526PB027PB128PB229PB1030PB1132VDD33PB1234PB1335PB1436PB1537PC638PC739PC840PC941PA842PA943PA1044PA1145PA1246PA1348VDD49PA1450PA1551PC1052PC1153PC1254PD255PB356PB457PB558PB659PB760BOOT061PB862PB964VDD
MCU_ST_STM32F1:STM32F105RCTxFrom KiCad's library

Footprint

Package_QFP:LQFP-64_10x10mm_P0.5mmFrom KiCad's library

From the datasheet

19
Supply, least
2 V · VDD, recommended operating min · p. 37
Supply, most
3.6 V · VDD, recommended operating max · p. 37
Supply, least
2.4 V · VDDA, ADC used, recommended operating min · p. 16
Supply, least
1.8 V · VBAT, recommended operating min · p. 37
Supply, absolute maximum
4 V · VDD and VDDA, absolute max · p. 36
Works from
-40 °C · Ambient, suffix 6, maximum power dissipation min · p. 37
Works up to
85 °C · Ambient, suffix 6, maximum power dissipation max · p. 37
Works up to
105 °C · Ambient, suffix 6, low power dissipation max · p. 37
Junction, hottest
105 °C · Junction, suffix 6, operating max · p. 37
Takes working
47.3 mA · Typical Run, 72 MHz, Flash, external clock, all peripherals enabled, 3.3 V, 25 °C · p. 44
Takes at most
68 mA · Max Run, 72 MHz, Flash, external clock, all peripherals enabled, 85 °C · p. 40
Takes asleep
2.1 µA · Typical Standby, oscillators and RTC off, 3.3 V, 25 °C · p. 41
A pin gives at most
25 mA · I/O or control pin sink, absolute max · p. 36
Junction to air (LQFP64 - 10 × 10 mm / 0.5 mm pitch)
45 K/W · Junction to ambient thermal resistance · p. 91
Junction, hottest
150 °C · Junction temperature, absolute max · p. 37
Takes working
57 mA · VDD typical run, 72 MHz, all peripherals except ethernet, HSE 8 MHz · p. 102
Takes at most
67 mA · VDD max run at 85 °C, 72 MHz, all peripherals except ethernet, HSE 14.74 MHz · p. 102
A pin gives at most
20 mA · GPIO source or sink max, relaxed VOL/VOH · p. 60
Junction to air (LQFP64)
45 K/W · junction-to-ambient thermal resistance · p. 91

What it is and has

19
Core
ARM 32-bit Cortex-M3 CPU · p. 1
Maximum CPU frequency
72 MHz · p. 1
Arithmetic
Single-cycle multiplication and hardware division · p. 1
SRAM
64 Kbytes · p. 1
Low-power modes
Sleep, Stop and Standby · p. 1
Temperature sensor
Integrated · p. 1
DAC
2 × 12-bit · p. 1
DMA
12 channels · p. 1
Debug interfaces
SWD and JTAG · p. 1
Trace
Cortex-M3 Embedded Trace Macrocell · p. 1
CRC and identification
CRC calculation unit, 96-bit unique ID · p. 1
I2C
Up to 2 interfaces, SMBus/PMBus · p. 1
CAN
2 × CAN 2.0B Active, 512 bytes dedicated SRAM · p. 1
USB
USB 2.0 full-speed device/host/OTG controller · p. 1
Basic timers
2 × 16-bit to drive DAC · p. 1
Package
LQFP64 10 × 10 mm · p. 1
CPU arithmetic
Single-cycle multiplication and hardware division · p. 1
Timers
Up to 10 timers with pinout remap capability · p. 1
USB certification
USB-IF certified, Full-Speed · p. 71

Around it

6
cap 4.7 µF
between VDD3 and VSS; Must be connected to VDD3. · p. 35
crystal 3 to 25 MHz
between OSC_IN and OSC_OUT; HSE crystal/ceramic resonator; place resonator and load capacitors as close as possible to oscillator pins. · p. 49
cap 5 pF to 25 pF
between OSC_IN and GND; CL1; high-quality ceramic for high-frequency applications; select for crystal load, including PCB and MCU pin capacitance. · p. 50
crystal 32.768 kHz
between OSC32_IN and OSC32_OUT; LSE crystal/ceramic resonator; place resonator and load capacitors as close as possible to oscillator pins. · p. 50
cap 5 pF to 15 pF
between OSC32_IN and GND; CL1; high-quality external ceramic; select for crystal requirements and stray capacitance. · p. 51
cap 8 pF
between OSC32_IN and GND; Example CL1 for crystal CL = 6 pF and Cstray = 2 pF. · p. 51

Specifications

433
ParameterConditionsAs printedPage
External main supply voltage (including VDDA and VDD) VDD–VSSAbsolute maximummin -0.3 · max 4 V36
Input voltage on any other pin VINMin VSS − 0.3max 4 V36
Variations between different VDD power pins |ΔVDDx|max 50 mV36
Variations between all the different ground pins |VSSX − VSS|max 50 mV36
Total current into VDD/VDDA power lines (source) IVDDmax 150 mA36
Total current out of VSS ground lines (sink) IVSSmax 150 mA36
Output current sunk by any I/O and control pin IIOmax 25 mA36
Output current source by any I/Os and control pin IIOmax -25 mA36
Storage temperature range TSTGmin -65 · max 150 °C37
Maximum junction temperature TJAbsolute maximummax 150 °C37
Internal AHB clock frequency fHCLKmin 0 · max 72 MHz37
Internal APB1 clock frequency fPCLK1min 0 · max 36 MHz37
Internal APB2 clock frequency fPCLK2min 0 · max 72 MHz37
Standard operating voltage VDDmin 2 · max 3.6 V37
Analog operating voltage (ADC not used) VDDAMust be the same potential as VDDmin 2 · max 3.6 V37
Analog operating voltage (ADC used) VDDAMust be the same potential as VDDmin 2.4 · max 3.6 V37
Backup operating voltage VBATmin 1.8 · max 3.6 V37
Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PDLQFP64; suffix 6; TA = 85 °C; footnote 3max 444 mW37
Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PDLQFP64; suffix 6; TA = 85 °C; footnote 4max 444 mW37
Ambient temperature for 6 suffix version TAMaximum power dissipationmin -40 · max 85 °C37
Ambient temperature for 6 suffix version TALow power dissipation; TJ must not exceed TJmaxmin -40 · max 105 °C37
Junction temperature range TJ6 suffix versionmin -40 · max 105 °C37
VDD rise time rate tVDDmin 0 us/V38
VDD fall time rate TJmin 20 us/V38
Programmable voltage detector level selection VPVDPLS[2:0]=000 (rising edge)min 2.1 · typ 2.18 · max 2.26 V38
Programmable voltage detector level selection VPVDPLS[2:0]=000 (falling edge)min 2 · typ 2.08 · max 2.16 V38
Programmable voltage detector level selection VPVDPLS[2:0]=001 (rising edge)min 2.19 · typ 2.28 · max 2.37 V38
Programmable voltage detector level selection VPVDPLS[2:0]=001 (falling edge)min 2.09 · typ 2.18 · max 2.27 V38
Programmable voltage detector level selection VPVDPLS[2:0]=010 (rising edge)min 2.28 · typ 2.38 · max 2.48 V38
Programmable voltage detector level selection VPVDPLS[2:0]=010 (falling edge)min 2.18 · typ 2.28 · max 2.38 V38
Programmable voltage detector level selection VPVDPLS[2:0]=011 (rising edge)min 2.38 · typ 2.48 · max 2.58 V38
Programmable voltage detector level selection VPVDPLS[2:0]=011 (falling edge)min 2.28 · typ 2.38 · max 2.48 V38
Programmable voltage detector level selection VPVDPLS[2:0]=100 (rising edge)min 2.47 · typ 2.58 · max 2.69 V38
Programmable voltage detector level selection VPVDPLS[2:0]=100 (falling edge)min 2.37 · typ 2.48 · max 2.59 V38
Programmable voltage detector level selection VPVDPLS[2:0]=101 (rising edge)min 2.57 · typ 2.68 · max 2.79 V38
Programmable voltage detector level selection VPVDPLS[2:0]=101 (falling edge)min 2.47 · typ 2.58 · max 2.69 V38
Programmable voltage detector level selection VPVDPLS[2:0]=110 (rising edge)min 2.66 · typ 2.78 · max 2.9 V38
Programmable voltage detector level selection VPVDPLS[2:0]=110 (falling edge)min 2.56 · typ 2.68 · max 2.8 V38
Programmable voltage detector level selection VPVDPLS[2:0]=111 (rising edge)min 2.76 · typ 2.88 · max 3 V38
Programmable voltage detector level selection VPVDPLS[2:0]=111 (falling edge)min 2.66 · typ 2.78 · max 2.9 V38
PVD hysteresis VPVDhystGuaranteed by design, not tested in productiontyp 100 mV38
Power on/power down reset threshold VPOR/PDRFalling edgemin 1.8 · typ 1.88 · max 1.96 V38
Power on/power down reset threshold VPOR/PDRRising edgemin 1.84 · typ 1.92 · max 2 V38
PDR hysteresis VPDRhystGuaranteed by design, not tested in productiontyp 40 mV38
Reset temporization TRSTTEMPOGuaranteed by design, not tested in productionmin 1 · typ 2.5 · max 4.5 ms38
Internal reference voltage VREFINT–40 °C < TA < +105 °Cmin 1.16 · typ 1.2 · max 1.26 V39
Internal reference voltage VREFINT–40 °C < TA < +85 °Cmin 1.16 · typ 1.2 · max 1.24 V39
ADC sampling time when reading the internal reference voltage TS_vrefinttyp 5.1 · max 17.1 us39
Internal reference voltage spread over the temperature range VRERINTVDD = 3 V ±10 mVmax 10 mV39
Temperature coefficient TCoeffmax 100 ppm/°C39
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 72 MHz; TA = 85 °Cmax 68 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 48 MHz; TA = 85 °Cmax 49 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 36 MHz; TA = 85 °Cmax 38.7 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 24 MHz; TA = 85 °Cmax 27.3 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 16 MHz; TA = 85 °Cmax 20.2 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 8 MHz; TA = 85 °Cmax 10.2 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 72 MHz; TA = 85 °Cmax 32.7 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 48 MHz; TA = 85 °Cmax 25 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 36 MHz; TA = 85 °Cmax 20.3 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 24 MHz; TA = 85 °Cmax 14.8 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 16 MHz; TA = 85 °Cmax 11.2 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 8 MHz; TA = 85 °Cmax 6.6 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 72 MHz; TA = 85 °Cmax 65.5 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 48 MHz; TA = 85 °Cmax 45.4 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 36 MHz; TA = 85 °Cmax 35.5 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 24 MHz; TA = 85 °Cmax 25.2 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 16 MHz; TA = 85 °Cmax 18 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; fHCLK = 8 MHz; TA = 85 °Cmax 10.5 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 72 MHz; TA = 85 °Cmax 31.4 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 48 MHz; TA = 85 °Cmax 27.8 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 36 MHz; TA = 85 °Cmax 17.6 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 24 MHz; TA = 85 °Cmax 13.1 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 16 MHz; TA = 85 °Cmax 10.2 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; fHCLK = 8 MHz; TA = 85 °Cmax 6.1 mA40
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; fHCLK = 72 MHz; TA = 85 °Cmax 48.4 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; fHCLK = 48 MHz; TA = 85 °Cmax 33.9 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; fHCLK = 36 MHz; TA = 85 °Cmax 26.7 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; fHCLK = 24 MHz; TA = 85 °Cmax 19.3 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; fHCLK = 16 MHz; TA = 85 °Cmax 14.2 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; fHCLK = 8 MHz; TA = 85 °Cmax 8.7 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; fHCLK = 72 MHz; TA = 85 °Cmax 10.1 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; fHCLK = 48 MHz; TA = 85 °Cmax 8.3 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; fHCLK = 36 MHz; TA = 85 °Cmax 7.5 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; fHCLK = 24 MHz; TA = 85 °Cmax 6.6 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; fHCLK = 16 MHz; TA = 85 °Cmax 6 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; fHCLK = 8 MHz; TA = 85 °Cmax 2.5 mA41
Supply current in Stop mode IDDRegulator in Run mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; VDD = 2.4 V, TA = 25 °Ctyp 32 uA41
Supply current in Stop mode IDDRegulator in Run mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; VDD = 3.3 V, TA = 25 °Ctyp 33 uA41
Supply current in Stop mode IDDRegulator in Run mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 85 °Cmax 600 uA41
Supply current in Stop mode IDDRegulator in Low Power mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; VDD = 2.4 V, TA = 25 °Ctyp 25 uA41
Supply current in Stop mode IDDRegulator in Low Power mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; VDD = 3.3 V, TA = 25 °Ctyp 26 uA41
Supply current in Stop mode IDDRegulator in Low Power mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 85 °Cmax 590 uA41
Supply current in Standby mode IDDLow-speed internal RC oscillator and independent watchdog ON; VDD = 2.4 V, TA = 25 °Ctyp 3 uA41
Supply current in Standby mode IDDLow-speed internal RC oscillator and independent watchdog ON; VDD = 3.3 V, TA = 25 °Ctyp 3.8 uA41
Supply current in Standby mode IDDLow-speed internal RC oscillator ON, independent watchdog OFF; VDD = 2.4 V, TA = 25 °Ctyp 2.8 uA41
Supply current in Standby mode IDDLow-speed internal RC oscillator ON, independent watchdog OFF; VDD = 3.3 V, TA = 25 °Ctyp 3.6 uA41
Supply current in Standby mode IDDLow-speed internal RC oscillator and independent watchdog OFF, low-speed oscillator and RTC OFF; VDD = 2.4 V, TA = 25 °Ctyp 1.9 uA41
Supply current in Standby mode IDDLow-speed internal RC oscillator and independent watchdog OFF, low-speed oscillator and RTC OFF; VDD = 3.3 V, TA = 25 °Ctyp 2.1 uA41
Supply current in Standby mode IDDLow-speed internal RC oscillator and independent watchdog OFF, low-speed oscillator and RTC OFF; TA = 85 °Cmax 5 uA41
Backup domain supply current IDD_VBATLow-speed oscillator and RTC ON; VBAT = 2.0 V, TA = 25 °Ctyp 1.1 uA41
Backup domain supply current IDD_VBATLow-speed oscillator and RTC ON; VBAT = 2.4 V, TA = 25 °Ctyp 1.2 uA41
Backup domain supply current IDD_VBATLow-speed oscillator and RTC ON; VBAT = 3.3 V, TA = 25 °Ctyp 1.4 uA41
Backup domain supply current IDD_VBATLow-speed oscillator and RTC ON; TA = 85 °Cmax 2.1 uA41
Supply current in Run mode IDDExternal clock; 72 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 47.3 mA44
Supply current in Run mode IDDExternal clock; 72 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 28.3 mA44
Supply current in Run mode IDDExternal clock; 48 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 32 mA44
Supply current in Run mode IDDExternal clock; 48 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 19.6 mA44
Supply current in Run mode IDDExternal clock; 36 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 24.6 mA44
Supply current in Run mode IDDExternal clock; 36 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 15.4 mA44
Supply current in Run mode IDDExternal clock; 24 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 16.8 mA44
Supply current in Run mode IDDExternal clock; 24 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 10.6 mA44
Supply current in Run mode IDDExternal clock; 16 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 11.8 mA44
Supply current in Run mode IDDExternal clock; 16 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 7.4 mA44
Supply current in Run mode IDDExternal clock; 8 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 5.9 mA44
Supply current in Run mode IDDExternal clock; 8 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 3.7 mA44
Supply current in Run mode IDDExternal clock; 4 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 3.7 mA44
Supply current in Run mode IDDExternal clock; 4 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 2.9 mA44
Supply current in Run mode IDDExternal clock; 2 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 2.5 mA44
Supply current in Run mode IDDExternal clock; 2 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 2 mA44
Supply current in Run mode IDDExternal clock; 1 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 1.8 mA44
Supply current in Run mode IDDExternal clock; 1 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 1.53 mA44
Supply current in Run mode IDDExternal clock; 500 kHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 1.5 mA44
Supply current in Run mode IDDExternal clock; 500 kHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 1.3 mA44
Supply current in Run mode IDDExternal clock; 125 kHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 1.3 mA44
Supply current in Run mode IDDExternal clock; 125 kHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 1.2 mA44
Supply current in Run mode IDDHSI, AHB prescaler used to reduce frequency; 36 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 23.9 mA44
Supply current in Run mode IDDHSI, AHB prescaler used to reduce frequency; 36 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 14.8 mA44
Supply current in Run mode IDDHSI, AHB prescaler used to reduce frequency; 24 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 16.1 mA44
Supply current in Run mode IDDHSI, AHB prescaler used to reduce frequency; 24 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 9.7 mA44
Supply current in Run mode IDDHSI, AHB prescaler used to reduce frequency; 16 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 11.1 mA44
Supply current in Run mode IDDHSI, AHB prescaler used to reduce frequency; 16 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 6.7 mA44
Supply current in Run mode IDDHSI, AHB prescaler used to reduce frequency; 8 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 5.6 mA44
Supply current in Run mode IDDHSI, AHB prescaler used to reduce frequency; 8 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 3.8 mA44
Supply current in Run mode IDDHSI, AHB prescaler used to reduce frequency; 4 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 3.1 mA44
Supply current in Run mode IDDHSI, AHB prescaler used to reduce frequency; 4 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 2.1 mA44
Supply current in Run mode IDDHSI, AHB prescaler used to reduce frequency; 2 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 1.8 mA44
Supply current in Run mode IDDHSI, AHB prescaler used to reduce frequency; 2 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 1.3 mA44
Supply current in Run mode IDDHSI, AHB prescaler used to reduce frequency; 1 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 1.16 mA44
Supply current in Run mode IDDHSI, AHB prescaler used to reduce frequency; 1 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 0.9 mA44
Supply current in Run mode IDDHSI, AHB prescaler used to reduce frequency; 500 kHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 0.8 mA44
Supply current in Run mode IDDHSI, AHB prescaler used to reduce frequency; 500 kHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 0.67 mA44
Supply current in Run mode IDDHSI, AHB prescaler used to reduce frequency; 125 kHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 0.6 mA44
Supply current in Run mode IDDHSI, AHB prescaler used to reduce frequency; 125 kHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 0.5 mA44
Thermal resistance junction-ambient ΘJALQFP64 - 10 × 10 mm / 0.5 mm pitchtyp 45 °C/W91
Input voltage on any other pin VINAbsolute maximummax 4 V36
Total current into VDD/VDDA power lines (source) IVDDAbsolute maximummax 150 mA36
Total current out of VSS ground lines (sink) IVSSAbsolute maximummax 150 mA36
Output current sunk by any I/O and control pin IIOAbsolute maximummax 25 mA36
Output current source by any I/Os and control pin IIOAbsolute maximummax -25 mA36
Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PDLQFP64; suffix 6, TA = 85 °C; footnote 3max 444 mW37
Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PDLQFP64; suffix 6, TA = 85 °C; footnote 4max 444 mW37
Supply current in Run mode IDDExternal clock, all peripherals enabled; 72 MHz; TA = 85 °Cmax 68 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 72 MHz; TA = 105 °Cmax 68.4 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 48 MHz; TA = 85 °Cmax 49 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 48 MHz; TA = 105 °Cmax 49.2 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 36 MHz; TA = 85 °Cmax 38.7 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 36 MHz; TA = 105 °Cmax 38.9 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 24 MHz; TA = 85 °Cmax 27.3 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 24 MHz; TA = 105 °Cmax 27.9 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 16 MHz; TA = 85 °Cmax 20.2 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 16 MHz; TA = 105 °Cmax 20.5 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 8 MHz; TA = 85 °Cmax 10.2 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 8 MHz; TA = 105 °Cmax 10.8 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 72 MHz; TA = 85 °Cmax 32.7 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 72 MHz; TA = 105 °Cmax 32.9 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 48 MHz; TA = 85 °Cmax 25 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 48 MHz; TA = 105 °Cmax 25.2 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 36 MHz; TA = 85 °Cmax 20.3 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 36 MHz; TA = 105 °Cmax 20.6 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 24 MHz; TA = 85 °Cmax 14.8 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 24 MHz; TA = 105 °Cmax 15.1 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 16 MHz; TA = 85 °Cmax 11.2 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 16 MHz; TA = 105 °Cmax 11.7 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 8 MHz; TA = 85 °Cmax 6.6 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 8 MHz; TA = 105 °Cmax 7.2 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 72 MHz; TA = 85 °Cmax 65.5 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 72 MHz; TA = 105 °Cmax 66 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 48 MHz; TA = 85 °Cmax 45.4 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 48 MHz; TA = 105 °Cmax 46 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 36 MHz; TA = 85 °Cmax 35.5 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 36 MHz; TA = 105 °Cmax 36.1 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 24 MHz; TA = 85 °Cmax 25.2 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 24 MHz; TA = 105 °Cmax 25.6 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 16 MHz; TA = 85 °Cmax 18 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 16 MHz; TA = 105 °Cmax 18.5 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 8 MHz; TA = 85 °Cmax 10.5 mA40
Supply current in Run mode IDDExternal clock, all peripherals enabled; 8 MHz; TA = 105 °Cmax 11 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 72 MHz; TA = 85 °Cmax 31.4 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 72 MHz; TA = 105 °Cmax 31.9 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 48 MHz; TA = 85 °Cmax 27.8 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 48 MHz; TA = 105 °Cmax 28.2 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 36 MHz; TA = 85 °Cmax 17.6 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 36 MHz; TA = 105 °Cmax 18.3 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 24 MHz; TA = 85 °Cmax 13.1 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 24 MHz; TA = 105 °Cmax 13.8 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 16 MHz; TA = 85 °Cmax 10.2 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 16 MHz; TA = 105 °Cmax 10.9 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 8 MHz; TA = 85 °Cmax 6.1 mA40
Supply current in Run mode IDDExternal clock, all peripherals disabled; 8 MHz; TA = 105 °Cmax 7.8 mA40
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 72 MHz; TA = 85 °Cmax 48.4 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 72 MHz; TA = 105 °Cmax 49 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 48 MHz; TA = 85 °Cmax 33.9 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 48 MHz; TA = 105 °Cmax 34.4 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 36 MHz; TA = 85 °Cmax 26.7 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 36 MHz; TA = 105 °Cmax 27.2 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 24 MHz; TA = 85 °Cmax 19.3 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 24 MHz; TA = 105 °Cmax 19.8 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 16 MHz; TA = 85 °Cmax 14.2 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 16 MHz; TA = 105 °Cmax 14.8 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 8 MHz; TA = 85 °Cmax 8.7 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals enabled; 8 MHz; TA = 105 °Cmax 9.1 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 72 MHz; TA = 85 °Cmax 10.1 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 72 MHz; TA = 105 °Cmax 10.6 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 48 MHz; TA = 85 °Cmax 8.3 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 48 MHz; TA = 105 °Cmax 8.75 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 36 MHz; TA = 85 °Cmax 7.5 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 36 MHz; TA = 105 °Cmax 8 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 24 MHz; TA = 85 °Cmax 6.6 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 24 MHz; TA = 105 °Cmax 7.1 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 16 MHz; TA = 85 °Cmax 6 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 16 MHz; TA = 105 °Cmax 6.5 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 8 MHz; TA = 85 °Cmax 2.5 mA41
Supply current in Sleep mode IDDExternal clock, all peripherals disabled; 8 MHz; TA = 105 °Cmax 3 mA41
Supply current in Stop mode IDDRegulator in Run mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; VDD = 2.4 V; TA = 25 °Ctyp 32 uA41
Supply current in Stop mode IDDRegulator in Run mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; VDD = 3.3 V; TA = 25 °Ctyp 33 uA41
Supply current in Stop mode IDDRegulator in Run mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 105 °Cmax 1300 uA41
Supply current in Stop mode IDDRegulator in Low Power mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; VDD = 2.4 V; TA = 25 °Ctyp 25 uA41
Supply current in Stop mode IDDRegulator in Low Power mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; VDD = 3.3 V; TA = 25 °Ctyp 26 uA41
Supply current in Stop mode IDDRegulator in Low Power mode; low-speed and high-speed internal RC oscillators and high-speed oscillator OFF; no independent watchdog; TA = 105 °Cmax 1280 uA41
Supply current in Standby mode IDDLow-speed internal RC oscillator and independent watchdog ON; VDD = 2.4 V; TA = 25 °Ctyp 3 uA41
Supply current in Standby mode IDDLow-speed internal RC oscillator and independent watchdog ON; VDD = 3.3 V; TA = 25 °Ctyp 3.8 uA41
Supply current in Standby mode IDDLow-speed internal RC oscillator ON, independent watchdog OFF; VDD = 2.4 V; TA = 25 °Ctyp 2.8 uA41
Supply current in Standby mode IDDLow-speed internal RC oscillator ON, independent watchdog OFF; VDD = 3.3 V; TA = 25 °Ctyp 3.6 uA41
Supply current in Standby mode IDDLow-speed internal RC oscillator and independent watchdog OFF, low-speed oscillator and RTC OFF; VDD = 2.4 V; TA = 25 °Ctyp 1.9 uA41
Supply current in Standby mode IDDLow-speed internal RC oscillator and independent watchdog OFF, low-speed oscillator and RTC OFF; VDD = 3.3 V; TA = 25 °Ctyp 2.1 uA41
Supply current in Standby mode IDDLow-speed internal RC oscillator and independent watchdog OFF, low-speed oscillator and RTC OFF; TA = 105 °Cmax 6.5 uA41
Backup domain supply current IDD_VBATLow-speed oscillator and RTC ON; VBAT = 2.0 V; TA = 25 °Ctyp 1.1 uA41
Backup domain supply current IDD_VBATLow-speed oscillator and RTC ON; VBAT = 2.4 V; TA = 25 °Ctyp 1.2 uA41
Backup domain supply current IDD_VBATLow-speed oscillator and RTC ON; VBAT = 3.3 V; TA = 25 °Ctyp 1.4 uA41
Backup domain supply current IDD_VBATLow-speed oscillator and RTC ON; TA = 105 °Cmax 2.3 uA41
Supply current in Run mode IDDHSI, AHB prescaler used; 36 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 23.9 mA44
Supply current in Run mode IDDHSI, AHB prescaler used; 36 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 14.8 mA44
Supply current in Run mode IDDHSI, AHB prescaler used; 24 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 16.1 mA44
Supply current in Run mode IDDHSI, AHB prescaler used; 24 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 9.7 mA44
Supply current in Run mode IDDHSI, AHB prescaler used; 16 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 11.1 mA44
Supply current in Run mode IDDHSI, AHB prescaler used; 16 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 6.7 mA44
Supply current in Run mode IDDHSI, AHB prescaler used; 8 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 5.6 mA44
Supply current in Run mode IDDHSI, AHB prescaler used; 8 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 3.8 mA44
Supply current in Run mode IDDHSI, AHB prescaler used; 4 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 3.1 mA44
Supply current in Run mode IDDHSI, AHB prescaler used; 4 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 2.1 mA44
Supply current in Run mode IDDHSI, AHB prescaler used; 2 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 1.8 mA44
Supply current in Run mode IDDHSI, AHB prescaler used; 2 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 1.3 mA44
Supply current in Run mode IDDHSI, AHB prescaler used; 1 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 1.16 mA44
Supply current in Run mode IDDHSI, AHB prescaler used; 1 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 0.9 mA44
Supply current in Run mode IDDHSI, AHB prescaler used; 500 kHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 0.8 mA44
Supply current in Run mode IDDHSI, AHB prescaler used; 500 kHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 0.67 mA44
Supply current in Run mode IDDHSI, AHB prescaler used; 125 kHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 0.6 mA44
Supply current in Run mode IDDHSI, AHB prescaler used; 125 kHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 0.5 mA44
Supply current in Sleep mode IDDExternal clock; 72 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 28.2 mA45
Supply current in Sleep mode IDDExternal clock; 72 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 6 mA45
Supply current in Sleep mode IDDExternal clock; 48 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 19 mA45
Supply current in Sleep mode IDDExternal clock; 48 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 4.2 mA45
Supply current in Sleep mode IDDExternal clock; 36 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 14.7 mA45
Supply current in Sleep mode IDDExternal clock; 36 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 3.4 mA45
Supply current in Sleep mode IDDExternal clock; 24 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 10.1 mA45
Supply current in Sleep mode IDDExternal clock; 24 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 2.5 mA45
Supply current in Sleep mode IDDExternal clock; 16 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 6.7 mA45
Supply current in Sleep mode IDDExternal clock; 16 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 2 mA45
Supply current in Sleep mode IDDExternal clock; 8 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 3.2 mA45
Supply current in Sleep mode IDDExternal clock; 8 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 1.3 mA45
Supply current in Sleep mode IDDExternal clock; 4 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 2.3 mA45
Supply current in Sleep mode IDDExternal clock; 4 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 1.2 mA45
Supply current in Sleep mode IDDExternal clock; 2 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 1.7 mA45
Supply current in Sleep mode IDDExternal clock; 2 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 1.16 mA45
Supply current in Sleep mode IDDExternal clock; 1 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 1.5 mA45
Supply current in Sleep mode IDDExternal clock; 1 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 1.1 mA45
Supply current in Sleep mode IDDExternal clock; 500 kHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 1.3 mA45
Supply current in Sleep mode IDDExternal clock; 500 kHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 1.05 mA45
Supply current in Sleep mode IDDExternal clock; 125 kHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 1.2 mA45
Supply current in Sleep mode IDDExternal clock; 125 kHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 1.05 mA45
Supply current in Sleep mode IDDHSI, AHB prescaler used; 36 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 13.7 mA45
Supply current in Sleep mode IDDHSI, AHB prescaler used; 36 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 2.6 mA45
Supply current in Sleep mode IDDHSI, AHB prescaler used; 24 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 9.3 mA45
Supply current in Sleep mode IDDHSI, AHB prescaler used; 24 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 1.8 mA45
Supply current in Sleep mode IDDHSI, AHB prescaler used; 16 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 6.3 mA45
Supply current in Sleep mode IDDHSI, AHB prescaler used; 16 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 1.3 mA45
Supply current in Sleep mode IDDHSI, AHB prescaler used; 8 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 2.7 mA45
Supply current in Sleep mode IDDHSI, AHB prescaler used; 8 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 0.6 mA45
Supply current in Sleep mode IDDHSI, AHB prescaler used; 4 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 1.6 mA45
Supply current in Sleep mode IDDHSI, AHB prescaler used; 4 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 0.5 mA45
Supply current in Sleep mode IDDHSI, AHB prescaler used; 2 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 1 mA45
Supply current in Sleep mode IDDHSI, AHB prescaler used; 2 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 0.46 mA45
Supply current in Sleep mode IDDHSI, AHB prescaler used; 1 MHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 0.8 mA45
Supply current in Sleep mode IDDHSI, AHB prescaler used; 1 MHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 0.44 mA45
Supply current in Sleep mode IDDHSI, AHB prescaler used; 500 kHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 0.6 mA45
Supply current in Sleep mode IDDHSI, AHB prescaler used; 500 kHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 0.43 mA45
Supply current in Sleep mode IDDHSI, AHB prescaler used; 125 kHz; all peripherals enabled; TA = 25 °C, VDD = 3.3 Vtyp 0.5 mA45
Supply current in Sleep mode IDDHSI, AHB prescaler used; 125 kHz; all peripherals disabled; TA = 25 °C, VDD = 3.3 Vtyp 0.42 mA45
APB2-BridgeAPB2 up to 72 MHz; 25 °Ctyp 3.47 uA/MHz47
GPIOAAPB2 up to 72 MHz; 25 °Ctyp 6.39 uA/MHz47
GPIOBAPB2 up to 72 MHz; 25 °Ctyp 6.39 uA/MHz47
GPIOCAPB2 up to 72 MHz; 25 °Ctyp 6.11 uA/MHz47
GPIODAPB2 up to 72 MHz; 25 °Ctyp 6.39 uA/MHz47
GPIOEAPB2 up to 72 MHz; 25 °Ctyp 6.11 uA/MHz47
SPI1APB2 up to 72 MHz; 25 °Ctyp 3.61 uA/MHz47
USART1APB2 up to 72 MHz; 25 °Ctyp 12.08 uA/MHz47
TIM1APB2 up to 72 MHz; 25 °Ctyp 23.47 uA/MHz47
ADC125 °C; fHCLK = 56 MHz, fAPB1 = fHCLK/2, fAPB2 = fHCLK, fADCCLK = fAPB2/4; add 0.6 mA analog current when ADON = 1typ 18.21 uA/MHz47
External user clock source frequency fHSE_extmin 1 · typ 8 · max 50 MHz47
OSC_IN high or low time tw(HSE)High or low pulsemin 5 ns47
OSC_IN rise or fall time tr(HSE), tf(HSE)max 20 ns47
OSC_IN input capacitance Cin(HSE)typ 5 pF47
Duty cycle DuCy(HSE)min 45 · max 55 %47
Oscillator frequency fOSC_INmin 3 · max 25 MHz49
Feedback resistor RFtyp 200 kΩ49
Recommended load capacitance versus equivalent serial resistance of the crystal (RS) CRS = 30 Ωtyp 30 pF49
HSE driving current i2VDD = 3.3 V, VIN = VSS with 30 pF loadmax 1 mA49
Oscillator transconductance gmStartupmin 25 mA/V49
Startup time tSU(HSE)VDD is stabilizedtyp 2 ms49
Feedback resistor RFtyp 5 MΩ50
Recommended load capacitance versus equivalent serial resistance of the crystal (RS) CRS = 30 kΩmax 15 pF50
LSE driving current I2VDD = 3.3 V, VIN = VSSmax 1.4 uA50
Oscillator Transconductance gmmin 5 uA/V50
Startup time tSU(LSE)VDD is stabilized; TA = 50 °Ctyp 1.5 s51
Startup time tSU(LSE)VDD is stabilized; TA = 25 °Ctyp 2.5 s51
Startup time tSU(LSE)VDD is stabilized; TA = 10 °Ctyp 4 s51
Startup time tSU(LSE)VDD is stabilized; TA = 0 °Ctyp 6 s51
Startup time tSU(LSE)VDD is stabilized; TA = -10 °Ctyp 10 s51
Startup time tSU(LSE)VDD is stabilized; TA = -20 °Ctyp 17 s51
Startup time tSU(LSE)VDD is stabilized; TA = -30 °Ctyp 32 s51
Startup time tSU(LSE)VDD is stabilized; TA = -40 °Ctyp 60 s51
Frequency fHSIVDD = 3.3 V, TA = –40 to 105 °Ctyp 8 MHz52
Duty cycle DuCy(HSI)VDD = 3.3 V, TA = –40 to 105 °Cmin 45 · max 55 %52
Accuracy of the HSI oscillator ACCHSIUser-trimmed with the RCC_CR register; guaranteed by designmax 1 %52
Accuracy of the HSI oscillator ACCHSIFactory-calibrated, TA = –40 to 105 °Cmin -2 · max 2.5 %52
Accuracy of the HSI oscillator ACCHSIFactory-calibrated, TA = –10 to 85 °Cmin -1.5 · max 2.2 %52
Accuracy of the HSI oscillator ACCHSIFactory-calibrated, TA = 0 to 70 °Cmin -1.3 · max 2 %52
Accuracy of the HSI oscillator ACCHSIFactory-calibrated, TA = 25 °Cmin -1.1 · max 1.8 %52
HSI oscillator startup time tsu(HSI)VDD = 3.3 V, TA = –40 to 105 °C; based on characterizationmin 1 · max 2 us52
HSI oscillator power consumption IDD(HSI)VDD = 3.3 V, TA = –40 to 105 °C; based on characterizationtyp 80 · max 100 uA52
Frequency fLSIVDD = 3 V, TA = –40 to 105 °Cmin 30 · typ 40 · max 60 kHz52
LSI oscillator startup time tsu(LSI)VDD = 3 V, TA = –40 to 105 °Cmax 85 us52
LSI oscillator power consumption IDD(LSI)VDD = 3 V, TA = –40 to 105 °Ctyp 0.65 · max 1.2 uA52
16-bit programming time tprogTA = –40 to +105 °Cmin 40 · typ 52.5 · max 70 us54
Page (1 KB) erase time tERASETA = –40 to +105 °Cmin 20 · max 40 ms54
Mass erase time tMETA = –40 to +105 °Cmin 20 · max 40 ms54
Supply current IDDRead mode, fHCLK = 72 MHz with 2 wait states, VDD = 3.3 Vmax 20 mA54
Supply current IDDWrite / Erase modes, fHCLK = 72 MHz, VDD = 3.3 Vmax 5 mA54
Supply current IDDPower-down mode / Halt, VDD = 3.0 to 3.6 Vmax 50 uA54
Programming voltage Vprogmin 2 · max 3.6 V54
Endurance NENDTA = –40 to +85 °C, 6 suffix versionsmin 10 Kcycles54
Data retention tRET1 kcycle at TA = 85 °Cmin 30 Years54
Data retention tRET1 kcycle at TA = 105 °Cmin 10 Years54
Data retention tRET10 kcycles at TA = 55 °Cmin 20 Years54
Electrostatic discharge voltage (human body model) VESD(HBM)TA = +25 °C conforming to JESD22-A114; class 2max 2000 V56
Electrostatic discharge voltage (charge device model) VESD(CDM)TA = +25 °C conforming to JESD22-C101; class IImax 500 V56
Output low level voltage for an I/O pin when 8 pins are sunk at same time VOLTTL port, IIO = +8 mA, 2.7 V < VDD < 3.6 Vmax 0.4 V60
Output low level voltage for an I/O pin when 8 pins are sunk at same time VOLCMOS port, IIO = +8 mA, 2.7 V < VDD < 3.6 Vmax 0.4 V60
Output high level voltage for an I/O pin when 8 pins are sourced at same time VOHCMOS port, IIO = +8 mA, 2.7 V < VDD < 3.6 Vmin 2.4 V60
Output low level voltage for an I/O pin when 8 pins are sunk at same time VOLIIO = +20 mA, 2.7 V < VDD < 3.6 Vmax 1.3 V60
Output low level voltage for an I/O pin when 8 pins are sunk at same time VOLIIO = +6 mA, 2 V < VDD < 2.7 Vmax 0.4 V60
Maximum frequency fmax(IO)outMODEx[1:0] = 10, CL = 50 pF, VDD = 2 V to 3.6 Vmax 2 MHz61
Output high to low level fall time tf(IO)outMODEx[1:0] = 10, CL = 50 pF, VDD = 2 V to 3.6 Vmax 125 ns61
Output low to high level rise time tr(IO)outMODEx[1:0] = 10, CL = 50 pF, VDD = 2 V to 3.6 Vmax 125 ns61
Maximum frequency fmax(IO)outMODEx[1:0] = 01, CL = 50 pF, VDD = 2 V to 3.6 Vmax 10 MHz61
Output high to low level fall time tf(IO)outMODEx[1:0] = 01, CL = 50 pF, VDD = 2 V to 3.6 Vmax 25 ns61
Output low to high level rise time tr(IO)outMODEx[1:0] = 01, CL = 50 pF, VDD = 2 V to 3.6 Vmax 25 ns61
Maximum frequency Fmax(IO)outMODEx[1:0] = 11, CL = 30 pF, VDD = 2.7 V to 3.6 Vmax 50 MHz61
Maximum frequency Fmax(IO)outMODEx[1:0] = 11, CL = 50 pF, VDD = 2.7 V to 3.6 Vmax 30 MHz61
Maximum frequency Fmax(IO)outMODEx[1:0] = 11, CL = 50 pF, VDD = 2 V to 2.7 Vmax 20 MHz61
Output high to low level fall time tf(IO)outMODEx[1:0] = 11, CL = 30 pF, VDD = 2.7 V to 3.6 Vmax 5 ns61
Output high to low level fall time tf(IO)outMODEx[1:0] = 11, CL = 50 pF, VDD = 2.7 V to 3.6 Vmax 8 ns61
Output high to low level fall time tf(IO)outMODEx[1:0] = 11, CL = 50 pF, VDD = 2 V to 2.7 Vmax 12 ns61
Output low to high level rise time tr(IO)outMODEx[1:0] = 11, CL = 30 pF, VDD = 2.7 V to 3.6 Vmax 5 ns61
Output low to high level rise time tr(IO)outMODEx[1:0] = 11, CL = 50 pF, VDD = 2.7 V to 3.6 Vmax 8 ns61
Output low to high level rise time tr(IO)outMODEx[1:0] = 11, CL = 50 pF, VDD = 2 V to 2.7 Vmax 12 ns61
Pulse width of external signals detected by the EXTI controller tEXTIpwmin 10 ns61
USB OTG FS transceiver startup time tSTARTUPGuaranteed by designmax 1 us71
USB OTG FS operating voltage VDDFull electrical characteristics; functionality ensured down to 2.7 Vmin 3 · max 3.6 V71
Differential input sensitivity VDII(USBDP, USBDM)min 0.2 V71
Differential common mode range VCMIncludes VDI rangemin 0.8 · max 2.5 V71
Single ended receiver threshold VSEmin 1.3 · max 2 V71
Static output level low VOLRL of 1.5 kΩ to 3.6 Vmax 0.3 V71
Static output level high VOHRL of 15 kΩ to VSSmin 2.8 · max 3.6 V71
Pull-down resistance on PA11, PA12 RPDVIN = VDDmin 17 · typ 21 · max 24 kΩ71
Pull-down resistance on PA9 RPDVIN = VDDmin 0.65 · typ 1.1 · max 2 kΩ71
Pull-up resistance on PA12 RPUVIN = VSSmin 1.5 · typ 1.8 · max 2.1 kΩ71
Pull-up resistance on PA9 RPUVIN = VSSmin 0.25 · typ 0.37 · max 0.55 kΩ71
Rise time trCL = 50 pF; measured from 10% to 90%min 4 · max 20 ns72
Fall time tfCL = 50 pF; measured from 10% to 90%min 4 · max 20 ns72
Rise/ fall time matching trfmtr/tfmin 90 · max 110 %72
Output signal crossover voltage VCRSmin 1.3 · max 2 V72
Power supply VDDAmin 2.4 · max 3.6 V74
Positive reference voltage VREF+Maximum VDDA; internally connected to VDDAmin 2.4 V74
Current on the VREF input pin IVREFBased on characterizationtyp 160 · max 220 uA74
ADC clock frequency fADCmin 0.6 · max 14 MHz74
Sampling rate fSmin 0.05 · max 1 MHz74
External trigger frequency fTRIGfADC = 14 MHzmax 823 kHz74
External trigger frequency fTRIGmax 17 1/fADC74
External input impedance RAINSee Equation 1 and Table 53 for detailsmax 50 kΩ74
Sampling switch resistance RADCmax 1 kΩ74
Internal sample and hold capacitor CADCmax 8 pF74
Injection trigger conversion latency tlatfADC = 14 MHzmax 0.214 us75
Regular trigger conversion latency tlatrfADC = 14 MHzmax 0.143 us75
Regular trigger conversion latency tlatrFor external triggers, add 1/fPCLK2max 2 1/fADC75
Sampling time tSfADC = 14 MHzmin 0.107 · max 17.1 us75
Sampling time tSmin 1.5 · max 239.5 1/fADC75
Power-up time tSTABmin 0 · typ 0 · max 1 us75
Total conversion time (including sampling time) tCONVfADC = 14 MHzmin 1 · max 18 us75
RAIN max RAINTs = 1.5 cycles, tS = 0.11 usmax 0.4 kΩ75
RAIN max RAINTs = 7.5 cycles, tS = 0.54 usmax 5.9 kΩ75
RAIN max RAINTs = 13.5 cycles, tS = 0.96 usmax 11.4 kΩ75
RAIN max RAINTs = 28.5 cycles, tS = 2.04 usmax 25.2 kΩ75
RAIN max RAINTs = 41.5 cycles, tS = 2.96 usmax 37.2 kΩ75
RAIN max RAINTs = 55.5 cycles, tS = 3.96 usmax 50 kΩ75
Analog supply voltage VDDAmin 2.4 · max 3.6 V79
Reference supply voltage VREF+VREF+ must always be below VDDAmin 2.4 · max 3.6 V79
Ground VSSAmin 0 · max 0 V79
Resistive load with buffer ON RLOADBuffer ONmin 5 kΩ79
Impedance output with buffer OFF ROBuffer OFF; minimum resistive load for 1% accuracy is 1.5 MΩmax 15 kΩ79
Capacitive load CLOADMaximum capacitive load at DAC_OUT pin when buffer ONmax 50 pF79
Lower DAC_OUT voltage with buffer ON DAC_OUT minBuffer ONmin 0.2 V79
Lower DAC_OUT voltage with buffer OFF DAC_OUT minBuffer OFFtyp 0.5 mV79
DAC DC current consumption in quiescent mode (Standby mode) IDDVREF+No load, worst code (0xF1C), VREF+ = 3.6 Vmax 220 uA79
DAC DC current consumption in quiescent mode (Standby mode) IDDANo load, middle code (0x800) on the inputsmax 380 uA79
DAC DC current consumption in quiescent mode (Standby mode) IDDANo load, worst code (0xF1C), VREF+ = 3.6 Vmax 480 uA79
Differential non linearity DNL10-bit configuration; maximum specified as ±0.5 LSBmax 0.5 LSB79
Differential non linearity DNL12-bit configuration; maximum specified as ±2 LSBmax 2 LSB79
Integral non linearity INL10-bit configuration; maximum specified as ±1 LSBmax 1 LSB79
Thermal resistance junction-ambient ΘJALQFP64 - 10 × 10 mm / 0.5 mm pitch; value columntyp 45 °C/W91
Supply current in run mode IDDVDD = 3.3 V; external clock, all peripherals enabled except ethernet, HSE = 8 MHz, fHCLK = 72 MHz, no MCO; maximum at 85 °Ctyp 57 · max 63 mA102
Supply current in run mode IDDVDD = 3.3 V; external clock, all peripherals enabled except ethernet, HSE = 14.74 MHz, fHCLK = 72 MHz, no MCO; maximum at 85 °Ctyp 60.5 · max 67 mA102
Supply current in run mode IDDVDD = 3.3 V; external clock, only OTG enabled, HSE = 8 MHz, fHCLK = 48 MHz, no MCOtyp 26.7 mA102

Pins, by the datasheet

25
1 VBAT
Backup supply for RTC, 32 kHz oscillator and backup registers when VDD is absent. · p. 27
5 OSC_IN
Oscillator input; PD0 can be remapped here by software. · p. 27
6 OSC_OUT
Oscillator output; PD1 can be remapped here by software. · p. 27
7 NRST
Reset pin. · p. 27
8 PC0
PC0 GPIO or ADC12_IN10. · p. 27
9 PC1
PC1 GPIO or ADC12_IN11. · p. 27
10 PC2
PC2 GPIO or ADC12_IN12. · p. 27
11 PC3
PC3 GPIO or ADC12_IN13. · p. 27
12 VSSA
Analog ground; connect to VSS. · p. 27
13 VDDA
Analog supply for ADC, reset blocks, RC oscillators and PLL; connect to VDD. · p. 27
14 PA0-WKUP
PA0 GPIO, WKUP, USART2_CTS, ADC12_IN0, TIM2_CH1_ETR or TIM5_CH1. · p. 27
15 PA1
PA1 GPIO, USART2_RTS, ADC12_IN1, TIM5_CH2 or TIM2_CH2. · p. 28
16 PA2
PA2 GPIO, USART2_TX, TIM5_CH3, ADC12_IN2 or TIM2_CH3. · p. 28
17 PA3
PA3 GPIO, USART2_RX, TIM5_CH4, ADC12_IN3 or TIM2_CH4. · p. 28
18 VSS_4
Ground supply pin. · p. 28
19 VDD_4
Main supply pin. · p. 28
20 PA4
PA4 GPIO, SPI1_NSS, DAC_OUT1, USART2_CK or ADC12_IN4; remap SPI3_NSS/I2S3_WS. · p. 28
21 PA5
PA5 GPIO, SPI1_SCK, DAC_OUT2 or ADC12_IN5. · p. 28
22 PA6
PA6 GPIO, SPI1_MISO, ADC12_IN6 or TIM3_CH1; remap TIM1_BKIN. · p. 28
23 PA7
PA7 GPIO, SPI1_MOSI, ADC12_IN7 or TIM3_CH2; remap TIM1_CH1N. · p. 28
24 PC4
PC4 GPIO or ADC12_IN14. · p. 28
25 PC5
PC5 GPIO or ADC12_IN15. · p. 28
26 PB0
PB0 GPIO, ADC12_IN8 or TIM3_CH3; remap TIM1_CH2N. · p. 28
27 PB1
PB1 GPIO, ADC12_IN9 or TIM3_CH4; remap TIM1_CH3N. · p. 28
28 PB2
PB2/BOOT1; 5 V tolerant GPIO. · p. 28

Open-source boards using it

5
  • 2 layers71.5 × 63.8 mmMiniUSBFF, the printed circuit board in 3D

    MiniUSBFF

    Board-Folk/flash-floppy-drives

    Multiple hardware projects that use the Flash Floppy firmware by Kier Fraser for various systems

    58 parts3
  • 2 layers82 × 56 mmTitan 2026 rev a, the printed circuit board in 3D

    Titan 2026 rev a

    savob/titan_2026

    TITAN Tandem Electronics System for 2026

    87 parts
  • 4 layers99.8 × 74.9 mmTo220 powerstage, the printed circuit board in 3D

    To220 powerstage

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    134 parts990GPL-3.0
  • 2 layers80 × 97.8 mmAtariST FF, the printed circuit board in 3D

    AtariST FF

    Board-Folk/flash-floppy-drives

    Multiple hardware projects that use the Flash Floppy firmware by Kier Fraser for various systems

    43 parts3
  • 2 layers111.5 × 63.8 mmSDFF, the printed circuit board in 3D

    SDFF

    Board-Folk/flash-floppy-drives

    Multiple hardware projects that use the Flash Floppy firmware by Kier Fraser for various systems

    55 parts3

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the STM32F105RCT6?

Yes. The symbol is MCU_ST_STM32F1:STM32F105RCTx and the footprint Package_QFP:LQFP-64_10x10mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the STM32F105RCT6?

LQFP-64(10x10), with 64 pins. Its footprint is drawn on this page.

Where is the STM32F105RCT6 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the STM32F105RCT6?

JLCPCB lists it as part C8345, with 5,989 in stock; the sellers' links on this page open their listings.

What can replace the STM32F105RCT6?

Parts like it in the library: the STM32F103RCT6 by STMicroelectronics, the MSPM0G3507SPMR by Texas Instruments, the GD32F103RBT6 by GigaDevice and the GD32F103RCT6 by GigaDevice. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the STM32F105RCT6?

5 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.