Skip to the content
2 layers71.5 × 63.8 mmMiniUSBFF, the printed circuit board in 3D

Multiple hardware projects that use the Flash Floppy firmware by Kier Fraser for various systems

Size
71.5 × 63.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
58
Nets
73
Pads
242
Tracks, vias
642, 100
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
1 Apr 2024
Updated
1 Jun 2026

Overview

MiniUSBFF is an open-source printed circuit board by Board-Folk, from the Board-Folk/flash-floppy-drives repository on GitHub. It is a 2-layer board of 71.5 × 63.8 mm with 58 parts on 73 nets, routed with 642 tracks and 100 vias.

It is built around the STM32F105RCT6 and AMS1117-3.3. Its parts include 23 resistors, 11 capacitors, 8 connectors, 3 ICs and 2 switches. It belongs with the STM32 boards of this library.

Main components

2

README

Atari/AtariST-FF/README.md

AtariST/FF

A Flash Floppy Hardware Design for the Atari ST Computer, specifically the 520ST that does not an internal drive. It can still be used with other ST Computers such as the STe.

PCB

PCB Production

Minimum track widths, clearances and via sizes are within the standard offering of modern PCB fabricators. Development was done using JLCPCB and as such the Gerber files are provided to their specification.

The design is verified to work as a 2-layer PCB.

Gerbers for JLCPCB are located in the production folder.

Bill of Materials

Most parts are marked on the board.

ReferanceValueFootprintQty
C1400, C1405, C1406100nF08053
C1401, C140220pF08052
C1403, C140410uF12062
R1401, R14041K08052
R14004K708051
R140710K08051
RN1401, RN14021KArray SIP92
D1401LED12061
U1400STM32F105RLQFP-641
U1401AMS1117-3.3SOT-223-31
U140274LS07SOIC-141
Y14018MHzCrystal_HC491
SW1401PTS645VH83-2 LFSAngled Tact Switch1
SW1402PTS645VH83-2 LFSAngled Tact Switch1
SW1404PTS645VH83-2 LFSAngled Tact Switch1
BZ1401ABT-410-RCBuzzer1
J1405Pin HeaderPinHeader_1x04_P2.54mm1
J1406Pin HeaderPinHeader_1x03_P2.54mm1
J1410Pin HeaderPinHeader_2x05_P2.54mm1
J1413Molex 1050170001USB Micro B1
J1414MSD-1-AMicro SD Card1
J1412SSD1306 128x32PinHeader_1x04_P2.54mm1
J1415SSD1306 128x64PinHeader_1x04_P2.54mm1
CD1401DIN 14ST Floppy1

Interactive BOM

OLED

The board gives two options for the OLED screen, the 128x32 or larger 128x64. Populate one not both.

Make sure to get the correct one that matches the VCC and GND positions. Some are different.

ST Floppy 14 Pin Din

For the ST Floppy connection, if you can still buy a 14 Pin DIN then use that.

Other option to use remove the pins from a normally available din connector, you will need 14 pins in total.

Put the pins into the ST floppy drive socket, align the board over the pins and genetly heat and add solder to secure the pins.

Try not to over heat each pin whilst in the ST as not to damage the socket on the ST and also make sure the ST is powered off and unplugged from everything.

There is also 3d printable tool to aid in holding the pins, this is still a prototype and needs some tweaking.

See the 3d-printable/din14 folder, model was made using sketchup.

3D Printable Case

See the 3d-printable/case folder for STL's, model was made using sketchup.

Legal

You are free to produce PCBs based on this project's designs at your own risk and without limitation, for your own use or for sale and/or repair at a reasonable price. Attribution is appreciated. The authors are not obliged to provide support of any kind.

Under no circumstances will the authors be held responsible or liable in any way for losses, damages or costs resulting from the use of the information and/or resources of this project.

The resources are provided "as-is" without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.

Parts

58
QtyValueFootprintReferences
191KResistor_SMD:R_0805_2012MetricR1401, R1404, R1405, R1406, R1412, R1413, R1414, R1415, R1416, R1417, R1418, R1419, R1420, R1421, R1422, R1423 +3
8100nFCapacitor_SMD:C_0805_2012MetricC1400, C1405, C1406, C1407, C1408, C1409, C1410, C1411
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3H1401, H1402, H1403, H1404
220pFCapacitor_SMD:C_0805_2012MetricC1401, C1402
222RResistor_SMD:R_0805_2012MetricR1402, R1403
110KResistor_SMD:R_0805_2012MetricR1407
110uFCapacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-IC1403
13.3VJumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mmJP1401
14K7Resistor_SMD:R_0805_2012MetricR1400
15VJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1402
174LS07Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU1402
18MHzCrystal:Crystal_SMD_HC49-SDY1401
1AConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW1401
1ACTLED_THT:LED_Rectangular_W5.0mm_H2.0mmD1401
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U1401
1BConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW1402
1BERGConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_HorizontalJ1409
1BOOT0Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1406
1BuzzerConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalBZ1401
1CONFIGConnector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ1410
1DISPLAYConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1412
1LOGO8SDFF:BF8G***
1PCConnector_PinHeader_2.54mm:PinHeader_2x17_P2.54mm_VerticalCD1400
1PROGConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1405
1ROTARYConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ1403
1STM32F105RPackage_QFP:LQFP-64_10x10mm_P0.5mmU1400
1USBConnector_USB:USB_A_Molex_67643_HorizontalJ1402
1USBConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1407

More from Board-Folk/flash-floppy-drives

2
  • 2 layers111.5 × 63.8 mmSDFF, the printed circuit board in 3D

    SDFF

    Board-Folk/flash-floppy-drives

    Multiple hardware projects that use the Flash Floppy firmware by Kier Fraser for various systems

    55 parts3
  • 2 layers80 × 97.8 mmAtariST FF, the printed circuit board in 3D

    AtariST FF

    Board-Folk/flash-floppy-drives

    Multiple hardware projects that use the Flash Floppy firmware by Kier Fraser for various systems

    43 parts3

Similar boards

  • 2 layers82 × 56 mmTitan 2026 rev a, the printed circuit board in 3D

    Titan 2026 rev a

    savob/titan_2026

    TITAN Tandem Electronics System for 2026

    87 parts
  • 4 layers99.8 × 74.9 mmTo220 powerstage, the printed circuit board in 3D

    To220 powerstage

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    134 parts990GPL-3.0
  • 2 layers290.1 × 130 mmPro V2, the printed circuit board in 3D

    Pro V2

    kata0510/Lily58

    6×4+4keys column-staggered split keyboard.

    312 parts2.3k
  • 2 layers26.2 × 45.5 mmPL18 multiprotocol, the printed circuit board in 3D

    PL18 multiprotocol

    pascallanger/DIY-Multiprotocol-TX-Module

    Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.

    24 parts1.9kGPL-3.0
  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 4 layers85 × 56 mmPslab mini, the printed circuit board in 3D

    Pslab mini

    fossasia/pslab-mini-hardware

    PSLab Mini Hardware https://pslab.io

    182 parts1.2kApache-2.0
  • 4 layers100 × 54 mm32Bit shift register, the printed circuit board in 3D

    32Bit shift register

    MaltWhiskey/Mega-Cube

    16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver

    64 parts766
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454

Questions

How big is the MiniUSBFF PCB?

It measures 71.5 × 63.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MiniUSBFF use?

58 parts, built around the STM32F105RCT6 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MiniUSBFF KiCad files?

From the Board-Folk/flash-floppy-drives repository on GitHub, at the commit this page was made from: the board is MiniUSBFF/MiniUSBFF.kicad_pcb and its schematic Apple/AppleIISDFF/AppleIISDFF.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MiniUSBFF design in my own project?

Its repository states no licence, so its author keeps all rights: ask Board-Folk before reusing the design.