4 layers60.8 × 61.3 mm
Overview
The STM32F042F6P6 is a microcontroller made by STMicroelectronics in a TSSOP-20(4.4x6.5) package with 20 pins. -40℃~+85℃ 1.65V~3.6V 12bit 16 32 Bit 32KB 48MHz 6KB ARM Cortex-M0 Built-in FLASH TSSOP-20(4.4x6.5) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32F0:STM32F042F6Px, from KiCad's library) and its footprint (Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 3,201 are in stock at JLCPCB (part C2969989). 19 open-source boards in 16 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
19- Supply, least
- 2 V · VDD, recommended operating min · p. 47
- Supply, most
- 3.6 V · VDD, recommended operating max · p. 47
- Supply, least
- 2.4 V · VDDA, ADC used, recommended operating min · p. 47
- Supply, absolute maximum
- 4 V · VDD, absolute max · p. 45
- Works from
- -40 °C · ambient, suffix 6, maximum power dissipation min · p. 47
- Works up to
- 85 °C · ambient, suffix 6, maximum power dissipation max · p. 47
- Works up to
- 105 °C · ambient, suffix 6, low power dissipation max · p. 47
- Junction, hottest
- 105 °C · junction, suffix 6, operating max · p. 47
- Junction, hottest
- 150 °C · junction, absolute max · p. 46
- Takes working
- 20.74 mA · sum of VDD and VDDA, Run from Flash, HSI and PLL, 48 MHz, peripherals enabled, 3.6 V, typical · p. 50
- Takes at most
- 24.94 mA · sum of VDD and VDDA, Run from Flash, HSI48, peripherals enabled, 3.6 V, 105 °C, max · p. 50
- Takes asleep
- 2.5 µA · sum of VDD and VDDA, Standby, LSI and IWDG off, VDDA monitoring off, 3.6 V, typical · p. 53
- A pin gives at most
- 25 mA · one I/O or control pin sinking, absolute max · p. 46
- Junction to air (TSSOP20)
- 76 K/W · junction to ambient, table value · p. 111
- Supply, least
- 1.65 V · VDDIO2, recommended operating min; VDD must be present · p. 47
- Takes working
- 20.82 mA · sum of VDD and VDDA typical, Run from Flash, HSI48, 48 MHz, peripherals enabled, supplies 3.6 V · p. 50
- Takes at most
- 23.74 mA · sum of VDD and VDDA max at 85 °C, Run from Flash, HSI48, 48 MHz, peripherals enabled, supplies 3.6 V · p. 50
- Takes working
- 20.86 mA · sum of VDD and VDDA typical Run currents, 48 MHz, peripherals enabled, 3.3 V · p. 55
- A pin gives at most
- 20 mA · GPIO source or sink rating with relaxed VOL/VOH · p. 75
What it is and has
23- Core
- ARM 32-bit Cortex-M0 · p. 1
- Maximum CPU frequency
- 48 MHz · p. 1
- Flash memory
- 32 Kbyte · p. 113
- SRAM
- 6 Kbytes with HW parity · p. 1
- CRC
- CRC calculation unit · p. 1
- DMA
- 5-channel controller · p. 1
- ADC
- One 12-bit, 1.0 µs ADC, up to 10 channels · p. 1
- Reset
- Power-on/Power down reset · p. 1
- Voltage detector
- Programmable voltage detector · p. 1
- Low power modes
- Sleep, Stop, Standby · p. 1
- CAN
- CAN interface · p. 1
- USB
- USB 2.0 full-speed · p. 1
- HDMI CEC
- Wakeup on header reception · p. 1
- Debug
- Serial wire debug · p. 1
- Unique ID
- 96-bit · p. 1
- Package
- TSSOP, 20 pins · p. 113
- Environmental designation
- ECOPACK2 · p. 1
- Core
- ARM 32-bit Cortex-M0 CPU · p. 1
- Clock
- Up to 48 MHz · p. 1
- Timers
- Nine timers · p. 1
- Watchdogs
- Independent and system watchdog timers · p. 1
- Timers
- 9 · p. 1
- ADC resolution
- 12-bit · p. 78
Around it
1- cap 5 pF to 20 pF
- between OSC_IN and GND; CL1; high-quality external ceramic capacitor for high-frequency applications; select for crystal load requirements and place close to oscillator pins. · p. 62
Specifications
893| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| External main supply voltage VDD–VSS | min -0.3 · max 4 V | 45 | |
| External I/O supply voltage VDDIO2–VSS | min -0.3 · max 4 V | 45 | |
| External analog supply voltage VDDA–VSS | min -0.3 · max 4 V | 45 | |
| Allowed voltage difference for VDD > VDDA VDD–VDDA | VDD > VDDA | max 0.4 V | 45 |
| External backup supply voltage VBAT–VSS | min -0.3 · max 4 V | 45 | |
| Input voltage on TTa pins VIN | max 4 V | 45 | |
| Input voltage on any other pin VIN | max 4 V | 45 | |
| Variations between different VDD power pins |∆VDDx| | max 50 mV | 45 | |
| Variations between all the different ground pins |VSSx - VSS| | max 50 mV | 45 | |
| Total current into sum of all VDD power lines (source) ΣIVDD | max 120 mA | 46 | |
| Total current out of sum of all VSS ground lines (sink) ΣIVSS | max -120 mA | 46 | |
| Maximum current into each VDD power pin (source) IVDD(PIN) | max 100 mA | 46 | |
| Maximum current out of each VSS ground pin (sink) IVSS(PIN) | max -100 mA | 46 | |
| Output current sunk by any I/O and control pin IIO(PIN) | max 25 mA | 46 | |
| Output current source by any I/O and control pin IIO(PIN) | max -25 mA | 46 | |
| Total output current sunk by sum of all I/Os and control pins ΣIIO(PIN) | max 80 mA | 46 | |
| Total output current sourced by sum of all I/Os and control pins ΣIIO(PIN) | max -80 mA | 46 | |
| Total output current sourced by sum of all I/Os supplied by VDDIO2 ΣIIO(PIN) | max -40 mA | 46 | |
| Injected current on FT and FTf pins IINJ(PIN) | min -5 · max 0 mA | 46 | |
| Injected current on TC and RST pin IINJ(PIN) | min -5 · max 5 mA | 46 | |
| Injected current on TTa pins IINJ(PIN) | min -5 · max 5 mA | 46 | |
| Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) | Absolute sum of positive and negative injected currents | min -25 · max 25 mA | 46 |
| Storage temperature range TSTG | min -65 · max 150 °C | 46 | |
| Maximum junction temperature TJ | Absolute maximum | max 150 °C | 46 |
| Internal AHB clock frequency fHCLK | min 0 · max 48 MHz | 47 | |
| Internal APB clock frequency fPCLK | min 0 · max 48 MHz | 47 | |
| Standard operating voltage VDD | min 2 · max 3.6 V | 47 | |
| I/O supply voltage VDDIO2 | Must not be supplied if VDD is not present; connected to VDD at TSSOP20 pin 16 | min 1.65 · max 3.6 V | 47 |
| Analog operating voltage (ADC not used) VDDA | Must have a potential equal to or higher than VDD | max 3.6 V | 47 |
| Analog operating voltage (ADC used) VDDA | Must have a potential equal to or higher than VDD | min 2.4 · max 3.6 V | 47 |
| Backup operating voltage VBAT | min 1.65 · max 3.6 V | 47 | |
| I/O input voltage VIN | TC and RST I/O | min -0.3 V | 47 |
| I/O input voltage VIN | TTa I/O | min -0.3 V | 47 |
| I/O input voltage VIN | FT and FTf I/O; internal pull-up disabled above VDDIOx + 0.3 V | min -0.3 · max 5.5 V | 47 |
| Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PD | TSSOP20; suffix 6, TA = 85 °C | max 263 mW | 47 |
| Ambient temperature for the suffix 6 version TA | Maximum power dissipation | min -40 · max 85 °C | 47 |
| Ambient temperature for the suffix 6 version TA | Low power dissipation; TJ must not exceed TJmax | min -40 · max 105 °C | 47 |
| Junction temperature range TJ | Suffix 6 version | min -40 · max 105 °C | 47 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals enabled except USB; max at TA = 25 °C | typ 20.3 · max 23.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals enabled except USB; max at TA = 85 °C | typ 20.3 · max 23.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals enabled except USB; max at TA = 105 °C | typ 20.3 · max 24.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals disabled; max at TA = 25 °C | typ 12.7 · max 14.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals disabled; max at TA = 85 °C | typ 12.7 · max 14.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48, 48 MHz, all peripherals disabled; max at TA = 105 °C | typ 12.7 · max 14.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled except USB; max at TA = 25 °C | typ 20.2 · max 22.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled except USB; max at TA = 85 °C | typ 20.2 · max 23 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals enabled except USB; max at TA = 105 °C | typ 20.2 · max 23.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max at TA = 25 °C | typ 12.6 · max 14.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max at TA = 85 °C | typ 12.6 · max 14.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 48 MHz, all peripherals disabled; max at TA = 105 °C | typ 12.6 · max 14.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled except USB; max at TA = 25 °C | typ 14 · max 16 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled except USB; max at TA = 85 °C | typ 14 · max 16.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals enabled except USB; max at TA = 105 °C | typ 14 · max 16.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max at TA = 25 °C | typ 8.7 · max 9.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max at TA = 85 °C | typ 8.7 · max 9.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 32 MHz, all peripherals disabled; max at TA = 105 °C | typ 8.7 · max 10.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled except USB; max at TA = 25 °C | typ 11 · max 13.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled except USB; max at TA = 85 °C | typ 11 · max 13.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals enabled except USB; max at TA = 105 °C | typ 11 · max 13.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max at TA = 25 °C | typ 6.9 · max 7.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max at TA = 85 °C | typ 6.9 · max 7.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on, 24 MHz, all peripherals disabled; max at TA = 105 °C | typ 6.9 · max 8.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled except USB; max at TA = 25 °C | typ 3.9 · max 5.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled except USB; max at TA = 85 °C | typ 3.9 · max 5.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals enabled except USB; max at TA = 105 °C | typ 3.9 · max 5.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max at TA = 25 °C | typ 2.6 · max 3.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max at TA = 85 °C | typ 2.6 · max 3.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 8 MHz, all peripherals disabled; max at TA = 105 °C | typ 2.6 · max 3.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled except USB; max at TA = 25 °C | typ 0.9 · max 1.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled except USB; max at TA = 85 °C | typ 0.9 · max 1.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals enabled except USB; max at TA = 105 °C | typ 0.9 · max 1.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max at TA = 25 °C | typ 0.7 · max 1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max at TA = 85 °C | typ 0.7 · max 1.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off, 1 MHz, all peripherals disabled; max at TA = 105 °C | typ 0.7 · max 1.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled except USB; max at TA = 25 °C | typ 20.5 · max 23.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled except USB; max at TA = 85 °C | typ 20.5 · max 23.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals enabled except USB; max at TA = 105 °C | typ 20.5 · max 23.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max at TA = 25 °C | typ 12.8 · max 14.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max at TA = 85 °C | typ 12.8 · max 14.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 48 MHz, all peripherals disabled; max at TA = 105 °C | typ 12.8 · max 15 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled except USB; max at TA = 25 °C | typ 14.3 · max 15.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled except USB; max at TA = 85 °C | typ 14.3 · max 15.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals enabled except USB; max at TA = 105 °C | typ 14.3 · max 17 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max at TA = 25 °C | typ 8.6 · max 9.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max at TA = 85 °C | typ 8.6 · max 9.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 32 MHz, all peripherals disabled; max at TA = 105 °C | typ 8.6 · max 10 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled except USB; max at TA = 25 °C | typ 11.2 · max 13.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled except USB; max at TA = 85 °C | typ 11.2 · max 13.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals enabled except USB; max at TA = 105 °C | typ 11.2 · max 14.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max at TA = 25 °C | typ 6.9 · max 7.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max at TA = 85 °C | typ 6.9 · max 7.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on, 24 MHz, all peripherals disabled; max at TA = 105 °C | typ 6.9 · max 7.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled except USB; max at TA = 25 °C | typ 4.1 · max 5.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled except USB; max at TA = 85 °C | typ 4.1 · max 5.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals enabled except USB; max at TA = 105 °C | typ 4.1 · max 5.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max at TA = 25 °C | typ 2.6 · max 3.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max at TA = 85 °C | typ 2.6 · max 3.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off, 8 MHz, all peripherals disabled; max at TA = 105 °C | typ 2.6 · max 3.3 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, peripherals enabled except USB; max at 25 °C | typ 19.3 · max 21.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, peripherals enabled except USB; max at 85 °C | typ 19.3 · max 22.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, peripherals enabled except USB; max at 105 °C | typ 19.3 · max 23.7 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, peripherals disabled; max at 25 °C | typ 11.9 · max 13.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, peripherals disabled; max at 85 °C | typ 11.9 · max 13.6 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI48, 48 MHz, peripherals disabled; max at 105 °C | typ 11.9 · max 13.7 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, peripherals enabled except USB; max at 25 °C | typ 19.2 · max 21.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, peripherals enabled except USB; max at 85 °C | max 22 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, peripherals enabled except USB; max at 105 °C | max 22.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, peripherals disabled; max at 25 °C | typ 11.7 · max 13.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, peripherals disabled; max at 85 °C | typ 11.7 · max 13.5 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 48 MHz, peripherals disabled; max at 105 °C | typ 11.7 · max 13.7 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, peripherals enabled except USB; max at 25 °C | typ 13.4 · max 15.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, peripherals enabled except USB; max at 85 °C | typ 13.4 · max 15.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, peripherals enabled except USB; max at 105 °C | typ 13.4 · max 16 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, peripherals disabled; max at 25 °C | typ 7.9 · max 8.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, peripherals disabled; max at 85 °C | typ 7.9 · max 8.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 32 MHz, peripherals disabled; max at 105 °C | typ 7.9 · max 9.7 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, peripherals enabled except USB; max at 25 °C | typ 10.3 · max 12.6 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, peripherals enabled except USB; max at 85 °C | typ 10.3 · max 13 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, peripherals enabled except USB; max at 105 °C | typ 10.3 · max 13.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, peripherals disabled; max at 25 °C | typ 6.2 · max 8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, peripherals disabled; max at 85 °C | typ 6.2 · max 8.2 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on, 24 MHz, peripherals disabled; max at 105 °C | typ 6.2 · max 8.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, peripherals enabled except USB; max at 25 °C | typ 3.6 · max 4.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, peripherals enabled except USB; max at 85 °C | typ 3.6 · max 4.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, peripherals enabled except USB; max at 105 °C | typ 3.6 · max 4.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, peripherals disabled; max at 25 °C | typ 2 · max 2.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, peripherals disabled; max at 85 °C | typ 2 · max 2.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 8 MHz, peripherals disabled; max at 105 °C | typ 2 · max 2.5 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, peripherals enabled except USB; max at 25 °C | typ 0.8 · max 0.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, peripherals enabled except USB; max at 85 °C | typ 0.8 · max 0.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, peripherals enabled except USB; max at 105 °C | typ 0.8 · max 1.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, peripherals disabled; max at 25 °C | typ 0.4 · max 0.5 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, peripherals disabled; max at 85 °C | typ 0.4 · max 0.6 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off, 1 MHz, peripherals disabled; max at 105 °C | typ 0.4 · max 0.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, peripherals enabled except USB; max at 25 °C | typ 19.5 · max 22 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, peripherals enabled except USB; max at 85 °C | typ 19.5 · max 22.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, peripherals enabled except USB; max at 105 °C | typ 19.5 · max 22.5 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, peripherals disabled; max at 25 °C | typ 11.8 · max 13.6 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, peripherals disabled; max at 85 °C | typ 11.8 · max 13.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 48 MHz, peripherals disabled; max at 105 °C | typ 11.8 · max 13.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, peripherals enabled except USB; max at 25 °C | typ 13.5 · max 16.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, peripherals enabled except USB; max at 85 °C | typ 13.5 · max 16.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, peripherals enabled except USB; max at 105 °C | typ 13.5 · max 16.6 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, peripherals disabled; max at 25 °C | typ 8 · max 8.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, peripherals disabled; max at 85 °C | typ 8 · max 9.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 32 MHz, peripherals disabled; max at 105 °C | typ 8 · max 9.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, peripherals enabled except USB; max at 25 °C | typ 10.5 · max 12.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, peripherals enabled except USB; max at 85 °C | typ 10.5 · max 13 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, peripherals enabled except USB; max at 105 °C | typ 10.5 · max 13.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, peripherals disabled; max at 25 °C | typ 6.5 · max 8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, peripherals disabled; max at 85 °C | typ 6.5 · max 8.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on, 24 MHz, peripherals disabled; max at 105 °C | typ 6.5 · max 8.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, peripherals enabled except USB; max at 25 °C | typ 3.7 · max 4.7 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, peripherals enabled except USB; max at 85 °C | typ 3.7 · max 5 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, peripherals enabled except USB; max at 105 °C | typ 3.7 · max 5.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, peripherals disabled; max at 25 °C | typ 2.1 · max 2.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, peripherals disabled; max at 85 °C | typ 2.1 · max 2.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off, 8 MHz, peripherals disabled; max at 105 °C | typ 2.1 · max 3 mA | 51 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, peripherals enabled except USB; max at 25 °C | typ 12.4 · max 15.1 mA | 51 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, peripherals enabled except USB; max at 85 °C | typ 12.4 · max 16.3 mA | 51 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, peripherals enabled except USB; max at 105 °C | typ 12.4 · max 16.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, peripherals disabled; max at 25 °C | typ 3 · max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, peripherals disabled; max at 85 °C | typ 3 · max 3.3 mA | 51 |
| Supply current in Sleep mode IDD | HSI48, 48 MHz, peripherals disabled; max at 105 °C | typ 3 · max 3.4 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, peripherals enabled except USB; max at 25 °C | typ 12.3 · max 15 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, peripherals enabled except USB; max at 85 °C | typ 12.3 · max 16 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, peripherals enabled except USB; max at 105 °C | typ 12.3 · max 16.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, peripherals disabled; max at 25 °C | typ 2.9 · max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, peripherals disabled; max at 85 °C | typ 2.9 · max 3.3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 48 MHz, peripherals disabled; max at 105 °C | typ 2.9 · max 3.4 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, peripherals enabled except USB; max at 25 °C | typ 8.5 · max 10.6 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, peripherals enabled except USB; max at 85 °C | typ 8.5 · max 11.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, peripherals enabled except USB; max at 105 °C | typ 8.5 · max 11.7 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, peripherals disabled; max at 25 °C | typ 1.9 · max 2.1 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, peripherals disabled; max at 85 °C | typ 1.9 · max 2.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 32 MHz, peripherals disabled; max at 105 °C | typ 1.9 · max 2.5 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, peripherals enabled except USB; max at 25 °C | typ 6.5 · max 8.1 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, peripherals enabled except USB; max at 85 °C | typ 6.5 · max 8.5 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, peripherals enabled except USB; max at 105 °C | typ 6.5 · max 8.7 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, peripherals disabled; max at 25 °C | typ 1.6 · max 1.8 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, peripherals disabled; max at 85 °C | typ 1.6 · max 1.8 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on, 24 MHz, peripherals disabled; max at 105 °C | typ 1.6 · max 1.9 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, peripherals enabled except USB; max at 25 °C | typ 2.3 · max 3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, peripherals enabled except USB; max at 85 °C | typ 2.3 · max 3.1 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, peripherals enabled except USB; max at 105 °C | typ 2.3 · max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, peripherals disabled; max at 25 °C | typ 0.7 · max 0.8 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, peripherals disabled; max at 85 °C | typ 0.7 · max 0.8 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 8 MHz, peripherals disabled; max at 105 °C | typ 0.7 · max 0.9 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, peripherals enabled except USB; max at 25 °C | typ 0.4 · max 0.4 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, peripherals enabled except USB; max at 85 °C | typ 0.4 · max 0.4 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, peripherals enabled except USB; max at 105 °C | typ 0.4 · max 0.6 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, peripherals disabled; max at 25 °C | typ 0.1 · max 0.3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, peripherals disabled; max at 85 °C | typ 0.1 · max 0.3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off, 1 MHz, peripherals disabled; max at 105 °C | typ 0.1 · max 0.4 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, peripherals enabled except USB; max at 25 °C | typ 12.4 · max 15.3 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, peripherals enabled except USB; max at 85 °C | typ 12.4 · max 15.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, peripherals enabled except USB; max at 105 °C | typ 12.4 · max 15.9 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, peripherals disabled; max at 25 °C | typ 3 · max 3 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, peripherals disabled; max at 85 °C | typ 3 · max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 48 MHz, peripherals disabled; max at 105 °C | typ 3 · max 3.4 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, peripherals enabled except USB; max at 25 °C | typ 8.6 · max 10.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, peripherals enabled except USB; max at 85 °C | typ 8.6 · max 11.3 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, peripherals enabled except USB; max at 105 °C | typ 8.6 · max 11.6 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, peripherals disabled; max at 25 °C | typ 2.1 · max 2.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, peripherals disabled; max at 85 °C | typ 2.1 · max 2.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 32 MHz, peripherals disabled; max at 105 °C | typ 2.1 · max 2.5 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, peripherals enabled except USB; max at 25 °C | typ 6.6 · max 8.4 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, peripherals enabled except USB; max at 85 °C | typ 6.6 · max 8.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, peripherals enabled except USB; max at 105 °C | typ 6.6 · max 8.9 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, peripherals disabled; max at 25 °C | typ 1.6 · max 1.6 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, peripherals disabled; max at 85 °C | typ 1.6 · max 1.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on, 24 MHz, peripherals disabled; max at 105 °C | typ 1.6 · max 1.9 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, peripherals enabled except USB; max at 25 °C | typ 2.4 · max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, peripherals enabled except USB; max at 85 °C | typ 2.4 · max 3.4 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, peripherals enabled except USB; max at 105 °C | typ 2.4 · max 3.6 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, peripherals disabled; max at 25 °C | typ 0.6 · max 0.8 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, peripherals disabled; max at 85 °C | typ 0.6 · max 0.9 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off, 8 MHz, peripherals disabled; max at 105 °C | typ 0.6 · max 1 mA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 2.4 V; max at 25 °C | typ 309 · max 325 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 2.4 V; max at 85 °C | typ 309 · max 332 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 2.4 V; max at 105 °C | typ 309 · max 342 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 3.6 V; max at 25 °C | typ 317 · max 334 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 3.6 V; max at 85 °C | typ 317 · max 338 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48, 48 MHz, VDDA = 3.6 V; max at 105 °C | typ 317 · max 344 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 2.4 V; max at 25 °C | typ 148 · max 167 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 2.4 V; max at 85 °C | typ 148 · max 176 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 2.4 V; max at 105 °C | typ 148 · max 179 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 3.6 V; max at 25 °C | typ 161 · max 181 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 3.6 V; max at 85 °C | typ 161 · max 193 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 48 MHz, VDDA = 3.6 V; max at 105 °C | typ 161 · max 197 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 2.4 V; max at 25 °C | typ 102 · max 119 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 2.4 V; max at 85 °C | typ 102 · max 124 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 2.4 V; max at 105 °C | typ 102 · max 126 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 3.6 V; max at 25 °C | typ 111 · max 128 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 3.6 V; max at 85 °C | typ 111 · max 135 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 32 MHz, VDDA = 3.6 V; max at 105 °C | typ 111 · max 137 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 2.4 V; max at 25 °C | typ 80 · max 95 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 2.4 V; max at 85 °C | typ 80 · max 99 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 2.4 V; max at 105 °C | typ 80 · max 100 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 3.6 V; max at 25 °C | typ 88 · max 102 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 3.6 V; max at 85 °C | typ 88 · max 106 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on, 24 MHz, VDDA = 3.6 V; max at 105 °C | typ 88 · max 108 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 2.4 V; max at 25 °C | typ 2.7 · max 3.7 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 2.4 V; max at 85 °C | typ 2.7 · max 4.2 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 2.4 V; max at 105 °C | typ 2.7 · max 4.5 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 3.6 V; max at 25 °C | typ 3.5 · max 4.7 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 3.6 V; max at 85 °C | typ 3.5 · max 5.2 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 8 MHz, VDDA = 3.6 V; max at 105 °C | typ 3.5 · max 5.5 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 2.4 V; max at 25 °C | typ 2.7 · max 3.7 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 2.4 V; max at 85 °C | typ 2.7 · max 4.2 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 2.4 V; max at 105 °C | typ 2.7 · max 4.2 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 3.6 V; max at 25 °C | typ 3.6 · max 4.7 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 3.6 V; max at 85 °C | typ 3.6 · max 5.2 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off, 1 MHz, VDDA = 3.6 V; max at 105 °C | typ 3.6 · max 5.5 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 2.4 V; max at 25 °C | typ 220 · max 242 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 2.4 V; max at 85 °C | typ 220 · max 251 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 2.4 V; max at 105 °C | typ 220 · max 254 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 3.6 V; max at 25 °C | typ 242 · max 264 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 3.6 V; max at 85 °C | typ 242 · max 275 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 48 MHz, VDDA = 3.6 V; max at 105 °C | typ 242 · max 279 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 2.4 V; max at 25 °C | typ 173 · max 193 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 2.4 V; max at 85 °C | typ 173 · max 200 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 2.4 V; max at 105 °C | typ 173 · max 202 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 3.6 V; max at 25 °C | typ 191 · max 211 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 3.6 V; max at 85 °C | typ 191 · max 219 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 32 MHz, VDDA = 3.6 V; max at 105 °C | typ 191 · max 221 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 2.4 V; max at 25 °C | typ 151 · max 169 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 2.4 V; max at 85 °C | typ 151 · max 175 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 2.4 V; max at 105 °C | typ 151 · max 177 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 3.6 V; max at 25 °C | typ 167 · max 184 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 3.6 V; max at 85 °C | typ 167 · max 191 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on, 24 MHz, VDDA = 3.6 V; max at 105 °C | typ 167 · max 193 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 2.4 V; max at 25 °C | typ 72 · max 82 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 2.4 V; max at 85 °C | typ 72 · max 85 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 2.4 V; max at 105 °C | typ 72 · max 85 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 3.6 V; max at 25 °C | typ 82 · max 92 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 3.6 V; max at 85 °C | typ 82 · max 95 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off, 8 MHz, VDDA = 3.6 V; max at 105 °C | typ 82 · max 95 uA | 52 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 14.3 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 14.5 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 14.6 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 14.7 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 14.8 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 14.9 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; TA = 25 °C | max 21 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; TA = 85 °C | max 47 uA | 53 |
| Supply current in Stop mode IDD | Regulator in run mode, all oscillators OFF; TA = 105 °C | max 64 uA | 53 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 2.9 uA | 53 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 3.1 uA | 53 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 3.2 uA | 53 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 3.3 uA | 53 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 3.4 uA | 53 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 3.5 uA | 53 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; TA = 25 °C | max 6.5 uA | 53 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; TA = 85 °C | max 32 uA | 53 |
| Supply current in Stop mode IDD | Regulator in low-power mode, all oscillators OFF; TA = 105 °C | max 44 uA | 53 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 0.8 uA | 53 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 0.9 uA | 53 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 1.1 uA | 53 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 1.2 uA | 53 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 1.3 uA | 53 |
| Supply current in Standby mode IDD | LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 1.5 uA | 53 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 0.6 uA | 53 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 0.7 uA | 53 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 0.8 uA | 53 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 0.9 uA | 53 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 1 uA | 53 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 1.1 uA | 53 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 25 °C | max 2 uA | 53 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 85 °C | max 2.5 uA | 53 |
| Supply current in Standby mode IDD | LSI OFF and IWDG OFF; TA = 105 °C | max 3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 2 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 2.1 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 2.2 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 2.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 2.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 2.7 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; TA = 25 °C | max 3.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; TA = 85 °C | max 3.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in run mode, all oscillators OFF; TA = 105 °C | max 4.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 2 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 2.1 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 2.2 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 2.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 2.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 2.7 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; TA = 25 °C | max 3.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; TA = 85 °C | max 3.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON, regulator in low-power mode, all oscillators OFF; TA = 105 °C | max 4.5 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 2.4 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 2.6 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 2.8 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 3 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 3.1 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 3.4 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 1.9 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 2 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 2.1 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 2.3 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 2.4 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 2.5 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; TA = 25 °C | max 3.4 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; TA = 85 °C | max 3.5 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON, LSI OFF and IWDG OFF; TA = 105 °C | max 4.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 1.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 1.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 1.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 1.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 1.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF, regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 1.5 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 1.7 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 1.8 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 1.8 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 2 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 2.1 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 2.2 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 1.1 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 1.2 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 1.2 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 1.3 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 1.3 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF, LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 1.4 uA | 53 |
| Thermal resistance junction-ambient ΘJA | TSSOP20 - 6.5 mm x 6.4 mm; stated value | typ 76 °C/W | 111 |
| Input voltage on TTa pins VIN | Minimum VSS - 0.3 V | max 4 V | 45 |
| Input voltage on any other pin VIN | Minimum VSS - 0.3 V | max 4 V | 45 |
| Injected current on FT and FTf pins IINJ(PIN) | Negative injection limit | max -5 mA | 46 |
| Injected current on FT and FTf pins IINJ(PIN) | Positive injection limit | max 0 mA | 46 |
| Injected current on TC and RST pin IINJ(PIN) | Maximum magnitude, ±5 mA | max 5 mA | 46 |
| Injected current on TTa pins IINJ(PIN) | Maximum magnitude, ±5 mA | max 5 mA | 46 |
| Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) | Maximum magnitude, ±25 mA; absolute sum of positive and negative injected currents | max 25 mA | 46 |
| Maximum junction temperature TJ | max 150 °C | 46 | |
| I/O supply voltage VDDIO2 | Must not be supplied if VDD is not present | min 1.65 · max 3.6 V | 47 |
| Analog operating voltage (ADC not used) VDDA | Minimum VDD; must have a potential equal to or higher than VDD | max 3.6 V | 47 |
| I/O input voltage VIN | TC and RST I/O; maximum VDDIOx+0.3 V | min -0.3 V | 47 |
| I/O input voltage VIN | TTa I/O; maximum VDDA+0.3 V | min -0.3 V | 47 |
| I/O input voltage VIN | FT and FTf I/O; disable internal pull-up for operation above VDDIOx + 0.3 V | min -0.3 · max 5.5 V | 47 |
| Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PD | TSSOP20; suffix 6; TA = 85 °C | max 263 mW | 47 |
| PVD threshold 6 VPVD6 | Rising edge | min 2.66 · typ 2.78 · max 2.9 V | 49 |
| PVD threshold 6 VPVD6 | Falling edge | min 2.56 · typ 2.68 · max 2.8 V | 49 |
| PVD threshold 7 VPVD7 | Rising edge | min 2.76 · typ 2.88 · max 3 V | 49 |
| PVD threshold 7 VPVD7 | Falling edge | min 2.66 · typ 2.78 · max 2.9 V | 49 |
| PVD hysteresis VPVDhyst | Guaranteed by design, not tested in production | typ 100 mV | 49 |
| PVD current consumption IDD(PVD) | Maximum guaranteed by design, not tested in production | typ 0.15 · max 0.26 uA | 49 |
| Internal reference voltage VREFINT | –40 °C < TA < +105 °C | min 1.2 · typ 1.23 · max 1.25 V | 49 |
| ADC_IN17 buffer startup time tSTART | Guaranteed by design, not tested in production | max 10 us | 49 |
| ADC sampling time when reading the internal reference voltage tS_vrefint | Guaranteed by design, not tested in production | min 4 us | 49 |
| Internal reference voltage spread over the temperature range ∆VREFINT | VDDA = 3 V; guaranteed by design, not tested in production | max 10 mV | 49 |
| Temperature coefficient TCoeff | Guaranteed by design, not tested in production | min -100 · max 100 ppm/°C | 49 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48; 48 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 20.3 · max 23.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48; 48 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 23.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48; 48 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 24.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48; 48 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 12.7 · max 14.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48; 48 MHz; all peripherals disabled; TA = 85 °C | max 14.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI48; 48 MHz; all peripherals disabled; TA = 105 °C | max 14.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 48 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 20.2 · max 22.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 48 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 23 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 48 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 23.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 48 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 12.6 · max 14.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 48 MHz; all peripherals disabled; TA = 85 °C | max 14.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 48 MHz; all peripherals disabled; TA = 105 °C | max 14.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 32 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 14 · max 16 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 32 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 16.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 32 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 16.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 32 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 8.7 · max 9.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 32 MHz; all peripherals disabled; TA = 85 °C | max 9.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 32 MHz; all peripherals disabled; TA = 105 °C | max 10.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 24 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 11 · max 13.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 24 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 13.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 24 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 13.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 24 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 6.9 · max 7.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 24 MHz; all peripherals disabled; TA = 85 °C | max 7.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL on; 24 MHz; all peripherals disabled; TA = 105 °C | max 8.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 8 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 3.9 · max 5.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 8 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 5.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 8 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 5.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 8 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 2.6 · max 3.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 8 MHz; all peripherals disabled; TA = 85 °C | max 3.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 8 MHz; all peripherals disabled; TA = 105 °C | max 3.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 1 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 0.9 · max 1.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 1 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 1.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 1 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 1.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 1 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 0.7 · max 1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 1 MHz; all peripherals disabled; TA = 85 °C | max 1.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSE bypass, PLL off; 1 MHz; all peripherals disabled; TA = 105 °C | max 1.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 48 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 20.5 · max 23.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 48 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 23.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 48 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 23.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 48 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 12.8 · max 14.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 48 MHz; all peripherals disabled; TA = 85 °C | max 14.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 48 MHz; all peripherals disabled; TA = 105 °C | max 15 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 32 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 14.3 · max 15.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 32 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 15.9 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 32 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 17 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 32 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 8.6 · max 9.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 32 MHz; all peripherals disabled; TA = 85 °C | max 9.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 32 MHz; all peripherals disabled; TA = 105 °C | max 10 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 24 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 11.2 · max 13.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 24 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 13.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 24 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 14.8 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 24 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 6.9 · max 7.4 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 24 MHz; all peripherals disabled; TA = 85 °C | max 7.5 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL on; 24 MHz; all peripherals disabled; TA = 105 °C | max 7.7 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off; 8 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 4.1 · max 5.2 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off; 8 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 5.3 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off; 8 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 5.6 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off; 8 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 2.6 · max 3.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off; 8 MHz; all peripherals disabled; TA = 85 °C | max 3.1 mA | 50 |
| Supply current in Run mode, code executing from Flash memory IDD | HSI clock, PLL off; 8 MHz; all peripherals disabled; TA = 105 °C | max 3.3 mA | 50 |
| Supply current in Run mode, code executing from RAM IDD | HSI48; 48 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 19.3 · max 21.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI48; 48 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 22.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI48; 48 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 23.7 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI48; 48 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 11.9 · max 13.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI48; 48 MHz; all peripherals disabled; TA = 85 °C | max 13.6 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI48; 48 MHz; all peripherals disabled; TA = 105 °C | max 13.7 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 48 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 19.2 · max 21.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 48 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 22 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 48 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 22.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 48 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 11.7 · max 13.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 48 MHz; all peripherals disabled; TA = 85 °C | max 13.5 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 48 MHz; all peripherals disabled; TA = 105 °C | max 13.7 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 32 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 13.4 · max 15.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 32 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 15.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 32 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 16 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 32 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 7.9 · max 8.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 32 MHz; all peripherals disabled; TA = 85 °C | max 8.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 32 MHz; all peripherals disabled; TA = 105 °C | max 9.7 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 24 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 10.3 · max 12.6 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 24 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 13 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 24 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 13.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 24 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 6.2 · max 8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 24 MHz; all peripherals disabled; TA = 85 °C | max 8.2 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL on; 24 MHz; all peripherals disabled; TA = 105 °C | max 8.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off; 8 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 3.6 · max 4.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off; 8 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 4.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off; 8 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 4.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off; 8 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 2 · max 2.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off; 8 MHz; all peripherals disabled; TA = 85 °C | max 2.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off; 8 MHz; all peripherals disabled; TA = 105 °C | max 2.5 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off; 1 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 0.8 · max 0.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off; 1 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 0.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off; 1 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 1.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off; 1 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 0.4 · max 0.5 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off; 1 MHz; all peripherals disabled; TA = 85 °C | max 0.6 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSE bypass, PLL off; 1 MHz; all peripherals disabled; TA = 105 °C | max 0.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 48 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 19.5 · max 22 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 48 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 22.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 48 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 22.5 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 48 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 11.8 · max 13.6 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 48 MHz; all peripherals disabled; TA = 85 °C | max 13.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 48 MHz; all peripherals disabled; TA = 105 °C | max 13.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 32 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 13.5 · max 16.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 32 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 16.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 32 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 16.6 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 32 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 8 · max 8.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 32 MHz; all peripherals disabled; TA = 85 °C | max 9.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 32 MHz; all peripherals disabled; TA = 105 °C | max 9.9 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 24 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 10.5 · max 12.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 24 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 13 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 24 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 13.8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 24 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 6.5 · max 8 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 24 MHz; all peripherals disabled; TA = 85 °C | max 8.1 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL on; 24 MHz; all peripherals disabled; TA = 105 °C | max 8.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off; 8 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 3.7 · max 4.7 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off; 8 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 5 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off; 8 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 5.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off; 8 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 2.1 · max 2.3 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off; 8 MHz; all peripherals disabled; TA = 85 °C | max 2.4 mA | 51 |
| Supply current in Run mode, code executing from RAM IDD | HSI clock, PLL off; 8 MHz; all peripherals disabled; TA = 105 °C | max 3 mA | 51 |
| Supply current in Sleep mode IDD | HSI48; 48 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 12.4 · max 15.1 mA | 51 |
| Supply current in Sleep mode IDD | HSI48; 48 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 16.3 mA | 51 |
| Supply current in Sleep mode IDD | HSI48; 48 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 16.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI48; 48 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 3 · max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI48; 48 MHz; all peripherals disabled; TA = 85 °C | max 3.3 mA | 51 |
| Supply current in Sleep mode IDD | HSI48; 48 MHz; all peripherals disabled; TA = 105 °C | max 3.4 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 48 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 12.3 · max 15 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 48 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 16 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 48 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 16.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 48 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 2.9 · max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 48 MHz; all peripherals disabled; TA = 85 °C | max 3.3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 48 MHz; all peripherals disabled; TA = 105 °C | max 3.4 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 32 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 8.5 · max 10.6 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 32 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 11.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 32 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 11.7 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 32 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 1.9 · max 2.1 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 32 MHz; all peripherals disabled; TA = 85 °C | max 2.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 32 MHz; all peripherals disabled; TA = 105 °C | max 2.5 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 24 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 6.5 · max 8.1 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 24 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 8.5 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 24 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 8.7 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 24 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 1.6 · max 1.8 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 24 MHz; all peripherals disabled; TA = 85 °C | max 1.8 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL on; 24 MHz; all peripherals disabled; TA = 105 °C | max 1.9 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off; 8 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 2.3 · max 3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off; 8 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 3.1 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off; 8 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off; 8 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 0.7 · max 0.8 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off; 8 MHz; all peripherals disabled; TA = 85 °C | max 0.8 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off; 8 MHz; all peripherals disabled; TA = 105 °C | max 0.9 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off; 1 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 0.4 · max 0.4 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off; 1 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 0.4 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off; 1 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 0.6 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off; 1 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 0.1 · max 0.3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off; 1 MHz; all peripherals disabled; TA = 85 °C | max 0.3 mA | 51 |
| Supply current in Sleep mode IDD | HSE bypass, PLL off; 1 MHz; all peripherals disabled; TA = 105 °C | max 0.4 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 48 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 12.4 · max 15.3 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 48 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 15.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 48 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 15.9 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 48 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 3 · max 3 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 48 MHz; all peripherals disabled; TA = 85 °C | max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 48 MHz; all peripherals disabled; TA = 105 °C | max 3.4 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 32 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 8.6 · max 10.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 32 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 11.3 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 32 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 11.6 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 32 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 2.1 · max 2.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 32 MHz; all peripherals disabled; TA = 85 °C | max 2.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 32 MHz; all peripherals disabled; TA = 105 °C | max 2.5 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 24 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 6.6 · max 8.4 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 24 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 8.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 24 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 8.9 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 24 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 1.6 · max 1.6 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 24 MHz; all peripherals disabled; TA = 85 °C | max 1.7 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL on; 24 MHz; all peripherals disabled; TA = 105 °C | max 1.9 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off; 8 MHz; all peripherals enabled; maximum at TA = 25 °C; USB disabled | typ 2.4 · max 3.2 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off; 8 MHz; all peripherals enabled; TA = 85 °C; USB disabled | max 3.4 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off; 8 MHz; all peripherals enabled; TA = 105 °C; USB disabled | max 3.6 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off; 8 MHz; all peripherals disabled; maximum at TA = 25 °C | typ 0.6 · max 0.8 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off; 8 MHz; all peripherals disabled; TA = 85 °C | max 0.9 mA | 51 |
| Supply current in Sleep mode IDD | HSI clock, PLL off; 8 MHz; all peripherals disabled; TA = 105 °C | max 1 mA | 51 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48; 48 MHz; VDDA = 2.4 V; maximum at TA = 25 °C | typ 309 · max 325 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48; 48 MHz; VDDA = 2.4 V; TA = 85 °C | max 332 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48; 48 MHz; VDDA = 2.4 V; TA = 105 °C | max 342 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48; 48 MHz; VDDA = 3.6 V; maximum at TA = 25 °C | typ 317 · max 334 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48; 48 MHz; VDDA = 3.6 V; TA = 85 °C | max 338 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI48; 48 MHz; VDDA = 3.6 V; TA = 105 °C | max 344 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 48 MHz; VDDA = 2.4 V; maximum at TA = 25 °C | typ 148 · max 167 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 48 MHz; VDDA = 2.4 V; TA = 85 °C | max 176 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 48 MHz; VDDA = 2.4 V; TA = 105 °C | max 179 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 48 MHz; VDDA = 3.6 V; maximum at TA = 25 °C | typ 161 · max 181 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 48 MHz; VDDA = 3.6 V; TA = 85 °C | max 193 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 48 MHz; VDDA = 3.6 V; TA = 105 °C | max 197 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 32 MHz; VDDA = 2.4 V; maximum at TA = 25 °C | typ 102 · max 119 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 32 MHz; VDDA = 2.4 V; TA = 85 °C | max 124 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 32 MHz; VDDA = 2.4 V; TA = 105 °C | max 126 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 32 MHz; VDDA = 3.6 V; maximum at TA = 25 °C | typ 111 · max 128 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 32 MHz; VDDA = 3.6 V; TA = 85 °C | max 135 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 32 MHz; VDDA = 3.6 V; TA = 105 °C | max 137 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 24 MHz; VDDA = 2.4 V; maximum at TA = 25 °C | typ 80 · max 95 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 24 MHz; VDDA = 2.4 V; TA = 85 °C | max 99 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 24 MHz; VDDA = 2.4 V; TA = 105 °C | max 100 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 24 MHz; VDDA = 3.6 V; maximum at TA = 25 °C | typ 88 · max 102 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 24 MHz; VDDA = 3.6 V; TA = 85 °C | max 106 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL on; 24 MHz; VDDA = 3.6 V; TA = 105 °C | max 108 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off; 8 MHz; VDDA = 2.4 V; maximum at TA = 25 °C | typ 2.7 · max 3.7 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off; 8 MHz; VDDA = 2.4 V; TA = 85 °C | max 4.2 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off; 8 MHz; VDDA = 2.4 V; TA = 105 °C | max 4.5 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off; 8 MHz; VDDA = 3.6 V; maximum at TA = 25 °C | typ 3.5 · max 4.7 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off; 8 MHz; VDDA = 3.6 V; TA = 85 °C | max 5.2 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off; 8 MHz; VDDA = 3.6 V; TA = 105 °C | max 5.5 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off; 1 MHz; VDDA = 2.4 V; maximum at TA = 25 °C | typ 2.7 · max 3.7 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off; 1 MHz; VDDA = 2.4 V; TA = 85 °C | max 4.2 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off; 1 MHz; VDDA = 2.4 V; TA = 105 °C | max 4.2 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off; 1 MHz; VDDA = 3.6 V; maximum at TA = 25 °C | typ 3.6 · max 4.7 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off; 1 MHz; VDDA = 3.6 V; TA = 85 °C | max 5.2 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSE bypass, PLL off; 1 MHz; VDDA = 3.6 V; TA = 105 °C | max 5.5 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 48 MHz; VDDA = 2.4 V; maximum at TA = 25 °C | typ 220 · max 242 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 48 MHz; VDDA = 2.4 V; TA = 85 °C | max 251 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 48 MHz; VDDA = 2.4 V; TA = 105 °C | max 254 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 48 MHz; VDDA = 3.6 V; maximum at TA = 25 °C | typ 242 · max 264 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 48 MHz; VDDA = 3.6 V; TA = 85 °C | max 275 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 48 MHz; VDDA = 3.6 V; TA = 105 °C | max 279 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 32 MHz; VDDA = 2.4 V; maximum at TA = 25 °C | typ 173 · max 193 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 32 MHz; VDDA = 2.4 V; TA = 85 °C | max 200 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 32 MHz; VDDA = 2.4 V; TA = 105 °C | max 202 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 32 MHz; VDDA = 3.6 V; maximum at TA = 25 °C | typ 191 · max 211 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 32 MHz; VDDA = 3.6 V; TA = 85 °C | max 219 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 32 MHz; VDDA = 3.6 V; TA = 105 °C | max 221 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 24 MHz; VDDA = 2.4 V; maximum at TA = 25 °C | typ 151 · max 169 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 24 MHz; VDDA = 2.4 V; TA = 85 °C | max 175 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 24 MHz; VDDA = 2.4 V; TA = 105 °C | max 177 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 24 MHz; VDDA = 3.6 V; maximum at TA = 25 °C | typ 167 · max 184 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 24 MHz; VDDA = 3.6 V; TA = 85 °C | max 191 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL on; 24 MHz; VDDA = 3.6 V; TA = 105 °C | max 193 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off; 8 MHz; VDDA = 2.4 V; maximum at TA = 25 °C | typ 72 · max 82 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off; 8 MHz; VDDA = 2.4 V; TA = 85 °C | max 85 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off; 8 MHz; VDDA = 2.4 V; TA = 105 °C | max 85 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off; 8 MHz; VDDA = 3.6 V; maximum at TA = 25 °C | typ 82 · max 92 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off; 8 MHz; VDDA = 3.6 V; TA = 85 °C | max 95 uA | 52 |
| Supply current in Run or Sleep mode, code executing from Flash memory or RAM IDDA | HSI clock, PLL off; 8 MHz; VDDA = 3.6 V; TA = 105 °C | max 95 uA | 52 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 2 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 2.1 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 2.2 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 2.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 2.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 2.7 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 25 °C | max 3.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 85 °C | max 3.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in run mode, all oscillators OFF; TA = 105 °C | max 4.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 2 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 2.1 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 2.2 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 2.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 2.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 2.7 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 25 °C | max 3.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 85 °C | max 3.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring ON; regulator in low-power mode, all oscillators OFF; TA = 105 °C | max 4.5 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 2.4 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 2.6 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 2.8 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 3 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 3.1 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 3.4 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 1.9 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 2 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 2.1 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 2.3 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 2.4 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 2.5 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 25 °C | max 3.4 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 85 °C | max 3.5 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring ON; LSI OFF and IWDG OFF; TA = 105 °C | max 4.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 1.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 1.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in run mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 1.5 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.0 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.4 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 2.7 V | typ 1.3 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.0 V | typ 1.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.3 V | typ 1.4 uA | 53 |
| Supply current in Stop mode IDDA | VDDA monitoring OFF; regulator in low-power mode, all oscillators OFF; VDD = VDDA = 3.6 V | typ 1.5 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.0 V | typ 1.7 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.4 V | typ 1.8 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 2.7 V | typ 1.8 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.0 V | typ 2 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.3 V | typ 2.1 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI ON and IWDG ON; VDD = VDDA = 3.6 V | typ 2.2 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 2.0 V | typ 1.1 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 2.4 V | typ 1.2 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 2.7 V | typ 1.2 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 3.0 V | typ 1.3 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 3.3 V | typ 1.3 uA | 53 |
| Supply current in Standby mode IDDA | VDDA monitoring OFF; LSI OFF and IWDG OFF; VDD = VDDA = 3.6 V | typ 1.4 uA | 53 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; VBAT = 1.65 V | typ 0.5 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; VBAT = 1.8 V | typ 0.5 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; VBAT = 2.4 V | typ 0.6 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; VBAT = 2.7 V | typ 0.7 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; VBAT = 3.3 V | typ 0.9 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; VBAT = 3.6 V | typ 1.1 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; TA = 25 °C | max 1.2 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; TA = 85 °C | max 1.5 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '00'; TA = 105 °C | max 2 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; VBAT = 1.65 V | typ 0.8 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; VBAT = 1.8 V | typ 0.9 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; VBAT = 2.4 V | typ 1.1 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; VBAT = 2.7 V | typ 1.2 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; VBAT = 3.3 V | typ 1.4 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; VBAT = 3.6 V | typ 1.5 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; TA = 25 °C | max 1.6 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; TA = 85 °C | max 2 uA | 54 |
| RTC domain supply current IDD_VBAT | LSE & RTC ON; Xtal mode; LSEDRV[1:0] = '11'; TA = 105 °C | max 2.6 uA | 54 |
| Current consumption from VDD supply IDD | 48 MHz; Run mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 20.7 mA | 55 |
| Current consumption from VDD supply IDD | 48 MHz; Run mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 12.8 mA | 55 |
| Current consumption from VDD supply IDD | 48 MHz; Sleep mode; peripherals enabled; VDD = VDDA = 3.3 V | typ 12.3 mA | 55 |
| Current consumption from VDD supply IDD | 48 MHz; Sleep mode; peripherals disabled; VDD = VDDA = 3.3 V | typ 3.4 mA | 55 |
| Current consumption from VDD supply IDD | 36 MHz; Run mode; peripherals enabled | typ 15.9 mA | 55 |
| Current consumption from VDD supply IDD | 36 MHz; Run mode; peripherals disabled | typ 9.9 mA | 55 |
| Current consumption from VDD supply IDD | 36 MHz; Sleep mode; peripherals enabled | typ 9.5 mA | 55 |
| Current consumption from VDD supply IDD | 36 MHz; Sleep mode; peripherals disabled | typ 2.7 mA | 55 |
| Current consumption from VDD supply IDD | 32 MHz; Run mode; peripherals enabled | typ 14.3 mA | 55 |
| Current consumption from VDD supply IDD | 32 MHz; Run mode; peripherals disabled | typ 9 mA | 55 |
| Current consumption from VDD supply IDD | 32 MHz; Sleep mode; peripherals enabled | typ 8.5 mA | 55 |
| Current consumption from VDD supply IDD | 32 MHz; Sleep mode; peripherals disabled | typ 2.5 mA | 55 |
| Current consumption from VDD supply IDD | 24 MHz; Run mode; peripherals enabled | typ 11 mA | 55 |
| Current consumption from VDD supply IDD | 24 MHz; Run mode; peripherals disabled | typ 7.1 mA | 55 |
| Current consumption from VDD supply IDD | 24 MHz; Sleep mode; peripherals enabled | typ 6.6 mA | 55 |
| Current consumption from VDD supply IDD | 24 MHz; Sleep mode; peripherals disabled | typ 2.1 mA | 55 |
| Current consumption from VDD supply IDD | 16 MHz; Run mode; peripherals enabled | typ 7.7 mA | 55 |
| Current consumption from VDD supply IDD | 16 MHz; Run mode; peripherals disabled | typ 5 mA | 55 |
| Current consumption from VDD supply IDD | 16 MHz; Sleep mode; peripherals enabled | typ 4.7 mA | 55 |
| Current consumption from VDD supply IDD | 16 MHz; Sleep mode; peripherals disabled | typ 1.6 mA | 55 |
| Current consumption from VDD supply IDD | 8 MHz; Run mode; peripherals enabled | typ 4.3 mA | 55 |
| Current consumption from VDD supply IDD | 8 MHz; Run mode; peripherals disabled | typ 3 mA | 55 |
| Current consumption from VDD supply IDD | 8 MHz; Sleep mode; peripherals enabled | typ 2.7 mA | 55 |
| Current consumption from VDD supply IDD | 8 MHz; Sleep mode; peripherals disabled | typ 1.2 mA | 55 |
| Current consumption from VDD supply IDD | 4 MHz; Run mode; peripherals enabled | typ 2.6 mA | 55 |
| Current consumption from VDD supply IDD | 4 MHz; Run mode; peripherals disabled | typ 2 mA | 55 |
| Current consumption from VDD supply IDD | 4 MHz; Sleep mode; peripherals enabled | typ 1.7 mA | 55 |
| Current consumption from VDD supply IDD | 4 MHz; Sleep mode; peripherals disabled | typ 0.9 mA | 55 |
| Current consumption from VDD supply IDD | 2 MHz; Run mode; peripherals enabled | typ 1.8 mA | 55 |
| Current consumption from VDD supply IDD | 2 MHz; Run mode; peripherals disabled | typ 1.5 mA | 55 |
| Current consumption from VDD supply IDD | 2 MHz; Sleep mode; peripherals enabled | typ 1.2 mA | 55 |
| Current consumption from VDD supply IDD | 2 MHz; Sleep mode; peripherals disabled | typ 0.8 mA | 55 |
| Current consumption from VDD supply IDD | 1 MHz; Run mode; peripherals enabled | typ 1.4 mA | 55 |
| Current consumption from VDD supply IDD | 1 MHz; Run mode; peripherals disabled | typ 1.2 mA | 55 |
| Current consumption from VDD supply IDD | 1 MHz; Sleep mode; peripherals enabled | typ 1 mA | 55 |
| Current consumption from VDD supply IDD | 1 MHz; Sleep mode; peripherals disabled | typ 0.8 mA | 55 |
| Current consumption from VDD supply IDD | 500 kHz; Run mode; peripherals enabled | typ 1.2 mA | 55 |
| Current consumption from VDD supply IDD | 500 kHz; Run mode; peripherals disabled | typ 1.1 mA | 55 |
| Current consumption from VDD supply IDD | 500 kHz; Sleep mode; peripherals enabled | typ 0.8 mA | 55 |
| Current consumption from VDD supply IDD | 500 kHz; Sleep mode; peripherals disabled | typ 0.7 mA | 55 |
| Current consumption from VDDA supply IDDA | 48 MHz; all Run and Sleep mode columns; VDD = VDDA = 3.3 V | typ 163.3 uA | 55 |
| Current consumption from VDDA supply IDDA | 36 MHz; all Run and Sleep mode columns | typ 124.3 uA | 55 |
| Current consumption from VDDA supply IDDA | 32 MHz; all Run and Sleep mode columns | typ 111.9 uA | 55 |
| Current consumption from VDDA supply IDDA | 24 MHz; all Run and Sleep mode columns | typ 87.1 uA | 55 |
| Current consumption from VDDA supply IDDA | 16 MHz; all Run and Sleep mode columns | typ 62.5 uA | 55 |
| Current consumption from VDDA supply IDDA | 8 MHz; all Run and Sleep mode columns | typ 2.5 uA | 55 |
| Current consumption from VDDA supply IDDA | 4 MHz; all Run and Sleep mode columns | typ 2.5 uA | 55 |
| Current consumption from VDDA supply IDDA | 2 MHz; all Run and Sleep mode columns | typ 2.5 uA | 55 |
| Current consumption from VDDA supply IDDA | 1 MHz; all Run and Sleep mode columns | typ 2.5 uA | 55 |
| Current consumption from VDDA supply IDDA | 500 kHz; all Run and Sleep mode columns | typ 2.5 uA | 55 |
| BusMatrix | AHB; 25 °C; automatically active when at least one master is ON | typ 2.2 uA/MHz | 58 |
| CRC | AHB; 25 °C | typ 1.9 uA/MHz | 58 |
| DMA | AHB; 25 °C | typ 5.1 uA/MHz | 58 |
| Flash memory interface | AHB; 25 °C | typ 15 uA/MHz | 58 |
| GPIOA | AHB; 25 °C | typ 8.2 uA/MHz | 58 |
| GPIOB | AHB; 25 °C | typ 7.7 uA/MHz | 58 |
| GPIOC | AHB; 25 °C | typ 2.1 uA/MHz | 58 |
| GPIOF | AHB; 25 °C | typ 1.8 uA/MHz | 58 |
| SRAM | AHB; 25 °C | typ 1.1 uA/MHz | 58 |
| TSC | AHB; 25 °C | typ 4.9 uA/MHz | 58 |
| All AHB peripherals | 25 °C | typ 49.8 uA/MHz | 58 |
| APB-Bridge | APB; 25 °C; automatically active when at least one peripheral is ON on the Bus | typ 2.9 uA/MHz | 59 |
| ADC | APB; 25 °C; analog IDDA consumption excluded | typ 3.9 uA/MHz | 59 |
| CAN | APB; 25 °C | typ 12.9 uA/MHz | 59 |
| CEC | APB; 25 °C | typ 1.5 uA/MHz | 59 |
| CRS | APB; 25 °C | typ 1 uA/MHz | 59 |
| DBG (MCU Debug Support) | APB; 25 °C | typ 0.2 uA/MHz | 59 |
| I2C1 | APB; 25 °C | typ 3.6 uA/MHz | 59 |
| PWR | APB; 25 °C | typ 1.4 uA/MHz | 59 |
| SPI1 | APB; 25 °C | typ 8.5 uA/MHz | 59 |
| SPI2 | APB; 25 °C | typ 6.1 uA/MHz | 59 |
| SYSCFG | APB; 25 °C | typ 1.8 uA/MHz | 59 |
| TIM1 | APB; 25 °C | typ 15.1 uA/MHz | 59 |
| TIM2 | APB; 25 °C | typ 16.8 uA/MHz | 59 |
| TIM3 | APB; 25 °C | typ 11.7 uA/MHz | 59 |
| TIM14 | APB; 25 °C | typ 5.5 uA/MHz | 59 |
| TIM16 | APB; 25 °C | typ 7 uA/MHz | 59 |
| TIM17 | APB; 25 °C | typ 6.9 uA/MHz | 59 |
| USART1 | APB; 25 °C | typ 17.8 uA/MHz | 59 |
| USART2 | APB; 25 °C | typ 5.6 uA/MHz | 59 |
| USB | APB; 25 °C | typ 4.9 uA/MHz | 59 |
| WWDG | APB; 25 °C | typ 1.4 uA/MHz | 59 |
| All APB peripherals | 25 °C | typ 136.7 uA/MHz | 59 |
| Wakeup from Stop mode tWUSTOP | Regulator in run mode; VDD = VDDA = 2.0 V; WFE | typ 3.2 · max 5 us | 60 |
| Wakeup from Stop mode tWUSTOP | Regulator in run mode; VDD = VDDA = 2.4 V; WFE | typ 3.1 · max 5 us | 60 |
| Wakeup from Stop mode tWUSTOP | Regulator in run mode; VDD = VDDA = 2.7 V; WFE | typ 2.9 · max 5 us | 60 |
| Wakeup from Stop mode tWUSTOP | Regulator in run mode; VDD = VDDA = 3 V; WFE | typ 2.9 · max 5 us | 60 |
| Wakeup from Stop mode tWUSTOP | Regulator in run mode; VDD = VDDA = 3.3 V; WFE | typ 2.8 · max 5 us | 60 |
| Wakeup from Stop mode tWUSTOP | Regulator in low power mode; VDD = VDDA = 2.0 V; WFE | typ 7 · max 9 us | 60 |
| Wakeup from Stop mode tWUSTOP | Regulator in low power mode; VDD = VDDA = 2.4 V; WFE | typ 5.8 · max 9 us | 60 |
| Wakeup from Stop mode tWUSTOP | Regulator in low power mode; VDD = VDDA = 2.7 V; WFE | typ 5.2 · max 9 us | 60 |
| Wakeup from Stop mode tWUSTOP | Regulator in low power mode; VDD = VDDA = 3 V; WFE | typ 4.9 · max 9 us | 60 |
| Wakeup from Stop mode tWUSTOP | Regulator in low power mode; VDD = VDDA = 3.3 V; WFE | typ 4.6 · max 9 us | 60 |
| Wakeup from Standby mode tWUSTANDBY | VDD = VDDA = 2.0 V; WFE | typ 60.4 us | 60 |
| Wakeup from Standby mode tWUSTANDBY | VDD = VDDA = 2.4 V; WFE | typ 55.6 us | 60 |
| Wakeup from Standby mode tWUSTANDBY | VDD = VDDA = 2.7 V; WFE | typ 53.5 us | 60 |
| Wakeup from Standby mode tWUSTANDBY | VDD = VDDA = 3 V; WFE | typ 52 us | 60 |
| Wakeup from Standby mode tWUSTANDBY | VDD = VDDA = 3.3 V; WFE | typ 51 us | 60 |
| Wakeup from Sleep mode tWUSLEEP | WFE | typ 4 SYSCLK cycles | 60 |
| User external clock source frequency fHSE_ext | typ 8 · max 32 MHz | 60 | |
| OSC_IN high or low time tw(HSEH), tw(HSEL) | min 15 ns | 60 | |
| OSC_IN rise or fall time tr(HSE), tf(HSE) | max 20 ns | 60 | |
| Oscillator frequency fOSC_IN | min 4 · typ 8 · max 32 MHz | 62 | |
| Feedback resistor RF | typ 200 kΩ | 62 | |
| HSE current consumption IDD | During startup | max 8.5 mA | 62 |
| HSE current consumption IDD | VDD = 3.3 V; Rm = 30 Ω; CL = 10 pF@8 MHz | typ 0.4 mA | 62 |
| HSE current consumption IDD | VDD = 3.3 V; Rm = 45 Ω; CL = 10 pF@8 MHz | typ 0.5 mA | 62 |
| HSE current consumption IDD | VDD = 3.3 V; Rm = 30 Ω; CL = 5 pF@32 MHz | typ 0.8 mA | 62 |
| HSE current consumption IDD | VDD = 3.3 V; Rm = 30 Ω; CL = 10 pF@32 MHz | typ 1 mA | 62 |
| HSE current consumption IDD | VDD = 3.3 V; Rm = 30 Ω; CL = 20 pF@32 MHz | typ 1.5 mA | 62 |
| Oscillator transconductance gm | Startup | min 10 mA/V | 62 |
| Startup time tSU(HSE) | VDD is stabilized | typ 2 ms | 62 |
| LSE current consumption IDD | low drive capability | typ 0.5 · max 0.9 uA | 63 |
| LSE current consumption IDD | medium-low drive capability | max 1 uA | 63 |
| LSE current consumption IDD | medium-high drive capability | max 1.3 uA | 63 |
| LSE current consumption IDD | high drive capability | max 1.6 uA | 63 |
| Oscillator transconductance gm | low drive capability | min 5 uA/V | 63 |
| Oscillator transconductance gm | medium-low drive capability | min 8 uA/V | 63 |
| Oscillator transconductance gm | medium-high drive capability | min 15 uA/V | 63 |
| Oscillator transconductance gm | high drive capability | min 25 uA/V | 63 |
| Startup time tSU(LSE) | VDDIOx is stabilized | typ 2 s | 63 |
| Frequency fLSI | VDDA = 3.3 V; TA = –40 to 105 °C | min 30 · typ 40 · max 50 kHz | 68 |
| LSI oscillator startup time tsu(LSI) | VDDA = 3.3 V; TA = –40 to 105 °C | max 85 us | 68 |
| LSI oscillator power consumption IDDA(LSI) | VDDA = 3.3 V; TA = –40 to 105 °C | typ 0.75 · max 1.2 uA | 68 |
| PLL input clock fPLL_IN | min 1 · typ 8 · max 24 MHz | 68 | |
| PLL input clock duty cycle fPLL_IN | min 40 · max 60 % | 68 | |
| PLL multiplier output clock fPLL_OUT | min 16 · max 48 MHz | 68 | |
| PLL lock time tLOCK | max 200 us | 68 | |
| Cycle-to-cycle jitter JitterPLL | max 300 ps | 68 | |
| 16-bit programming time tprog | TA = - 40 to +105 °C | min 40 · typ 53.5 · max 60 us | 68 |
| Page (1 KB) erase time tERASE | TA = - 40 to +105 °C | min 20 · max 40 ms | 68 |
| Mass erase time tME | TA = - 40 to +105 °C | min 20 · max 40 ms | 68 |
| Supply current IDD | Write mode; TA = –40 to 105 °C | max 10 mA | 68 |
| Supply current IDD | Erase mode; TA = –40 to 105 °C | max 12 mA | 68 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | All packages; TA = +25 °C; conforming to JESD22-A114; class 2 | max 2000 V | 71 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | All packages; TA = +25 °C; conforming to ANSI/ESD STM5.3.1; class C4 | max 500 V | 71 |
| Output low level voltage for an I/O pin VOL | CMOS port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 75 |
| Output low level voltage for an I/O pin VOL | TTL port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 75 |
| Output high level voltage for an I/O pin VOH | TTL port; |IIO| = 8 mA; VDDIOx ≥ 2.7 V | min 2.4 V | 75 |
| Output low level voltage for an I/O pin VOL | |IIO| = 20 mA; VDDIOx ≥ 2.7 V | max 1.3 V | 75 |
| Output low level voltage for an I/O pin VOL | |IIO| = 6 mA; VDDIOx ≥ 2 V | max 0.4 V | 75 |
| Output low level voltage for an I/O pin VOL | |IIO| = 4 mA | max 0.4 V | 75 |
| Output low level voltage for an FTf I/O pin in Fm+ mode VOLFm+ | |IIO| = 20 mA; VDDIOx ≥ 2.7 V | max 0.4 V | 75 |
| Output low level voltage for an FTf I/O pin in Fm+ mode VOLFm+ | |IIO| = 10 mA | max 0.4 V | 75 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx ≥ 2 V | max 2 MHz | 76 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx ≥ 2 V | max 125 ns | 76 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx ≥ 2 V | max 125 ns | 76 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx < 2 V | max 1 MHz | 76 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx < 2 V | max 125 ns | 76 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = x0; CL = 50 pF; VDDIOx < 2 V | max 125 ns | 76 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx ≥ 2 V | max 10 MHz | 76 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx ≥ 2 V | max 25 ns | 76 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx ≥ 2 V | max 25 ns | 76 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx < 2 V | max 4 MHz | 76 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx < 2 V | max 62.5 ns | 76 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 01; CL = 50 pF; VDDIOx < 2 V | max 62.5 ns | 76 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF; VDDIOx ≥ 2.7 V | max 50 MHz | 76 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx ≥ 2.7 V | max 30 MHz | 76 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; 2 V ≤ VDDIOx < 2.7 V | max 20 MHz | 76 |
| Maximum frequency fmax(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx < 2 V | max 10 MHz | 76 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF; VDDIOx ≥ 2.7 V | max 5 ns | 76 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx ≥ 2.7 V | max 8 ns | 76 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; 2 V ≤ VDDIOx < 2.7 V | max 12 ns | 76 |
| Output fall time tf(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx < 2 V | max 25 ns | 76 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 30 pF; VDDIOx ≥ 2.7 V | max 5 ns | 76 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx ≥ 2.7 V | max 8 ns | 76 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; 2 V ≤ VDDIOx < 2.7 V | max 12 ns | 76 |
| Output rise time tr(IO)out | OSPEEDRy[1:0] = 11; CL = 50 pF; VDDIOx < 2 V | max 25 ns | 76 |
| Maximum frequency fmax(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx ≥ 2 V | max 2 MHz | 77 |
| Output fall time tf(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx ≥ 2 V | max 12 ns | 77 |
| Output rise time tr(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx ≥ 2 V | max 34 ns | 77 |
| Maximum frequency fmax(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx < 2 V | max 0.5 MHz | 77 |
| Output fall time tf(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx < 2 V | max 16 ns | 77 |
| Output rise time tr(IO)out | Fm+ configuration; CL = 50 pF; VDDIOx < 2 V | max 44 ns | 77 |
| Pulse width of external signals detected by the EXTI controller tEXTIpw | min 10 ns | 77 | |
| NRST Schmitt trigger voltage hysteresis Vhys(NRST) | typ 200 mV | 78 | |
| Weak pull-up equivalent resistor RPU | VIN = VSS | min 25 · typ 40 · max 55 kΩ | 78 |
| NRST input filtered pulse VF(NRST) | max 100 ns | 78 | |
| NRST input not filtered pulse VNF(NRST) | 2.7 < VDD < 3.6 | min 300 ns | 78 |
| NRST input not filtered pulse VNF(NRST) | 2.0 < VDD < 3.6 | min 500 ns | 78 |
| Analog supply voltage for ADC ON VDDA | min 2.4 · max 3.6 V | 78 | |
| Current consumption of the ADC IDDA (ADC) | VDDA = 3.3 V | typ 0.9 mA | 78 |
| ADC clock frequency fADC | min 0.6 · max 14 MHz | 78 | |
| Sampling rate fS | 12-bit resolution | min 0.043 · max 1 MHz | 78 |
Pins, by the datasheet
20- 1 PB8-BOOT0
- Boot memory selection and GPIO; alternate functions I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC and CAN_RX. · p. 35
- 2 PF0-OSC_IN
- GPIO or oscillator input; alternate functions CRS_SYNC and I2C1_SDA. · p. 32
- 3 PF1-OSC_OUT
- GPIO or oscillator output; alternate function I2C1_SCL. · p. 32
- 4 NRST
- Active-low device reset input and internal reset output, with embedded weak pull-up resistor. · p. 32
- 5 VDDA
- Analog power supply. · p. 32
- 6 PA0
- GPIO; USART2_CTS, TIM2_CH1_ETR, TSC_G1_IO1, RTC_TAMP2, WKUP1 and ADC_IN0. · p. 32
- 7 PA1
- GPIO; USART2_RTS, TIM2_CH2, TSC_G1_IO2, EVENTOUT and ADC_IN1. · p. 32
- 8 PA2
- GPIO; USART2_TX, TIM2_CH3, TSC_G1_IO3, ADC_IN2 and WKUP4. · p. 32
- 9 PA3
- GPIO; USART2_RX, TIM2_CH4, TSC_G1_IO4 and ADC_IN3. · p. 32
- 10 PA4
- GPIO; SPI1_NSS, I2S1_WS, TIM14_CH1, TSC_G2_IO1, USART2_CK, USB_NOE and ADC_IN4. · p. 33
- 11 PA5
- GPIO; SPI1_SCK, I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2 and ADC_IN5. · p. 33
- 12 PA6
- GPIO; SPI1_MISO, I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, TSC_G2_IO3, EVENTOUT and ADC_IN6. · p. 33
- 13 PA7
- GPIO; SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, TSC_G2_IO4, EVENTOUT and ADC_IN7. · p. 33
- 14 PB1
- GPIO; TIM3_CH4, TIM14_CH1, TIM1_CH3N, TSC_G3_IO3 and ADC_IN9. · p. 33
- 15 VSS
- Ground; the VSSA die pad is also connected to this pin. · p. 33
- 16 VDD
- Digital power supply; VDDIO2 is also connected to this pin. · p. 33
- 17 PA9
- GPIO; USART1_TX, TIM1_CH2, TSC_G4_IO1 and I2C1_SCL. Can be remapped to PA11 for CAN_RX, USART1_CTS, TIM1_CH4, TSC_G4_IO3, EVENTOUT, I2C1_SCL and USB_DM. · p. 34
- 18 PA10
- GPIO; USART1_RX, TIM1_CH3, TIM17_BKIN, TSC_G4_IO2 and I2C1_SDA. Can be remapped to PA12 for CAN_TX, USART1_RTS, TIM1_ETR, TSC_G4_IO4, EVENTOUT, I2C1_SDA and USB_DP. · p. 34
- 19 PA13
- GPIO; IR_OUT, SWDIO and USB_NOE. Configured as SWDIO with internal pull-up after reset. · p. 34
- 20 PA14
- GPIO; USART2_TX and SWCLK. Configured as SWCLK with internal pull-down after reset. · p. 34
Parameters
18- ADC (Bit)
- 12bit
- CPU Core
- ARM Cortex-M0
- CPU Maximum Speed
- 48MHz
- Core Size
- 32 Bit
- Current - Supply
- 20.74mA
- Current - Supply(Max)
- 24.94mA
- Junction Temperature(Max)
- 105℃
- Number of I/O
- 16
- Operating Temperature
- -40℃~+105℃
- Oscillator Type
- Built-in
- Output Current per Pin(Max)
- 25mA
- Program Memory Type
- FLASH
- Program Storage Size
- 32KB
- RAM Size
- 6KB
- Standby Current
- 2.5uA
- Thermal Resistance(Junction to Ambient)
- 76℃/W
- Voltage - Supply
- 1.65V~3.6V
- Voltage - Supply(Absolute Max)
- 4V
Order codes
2- STM32F042F6P6TRLCSC C2969989
- STM32F042F6P6LCSC C81000
Pinout
20| Pin | Name | Type |
|---|---|---|
| 1 | PB8 | Input/output |
| 2 | PF0 | Input/output |
| 3 | PF1 | Input/output |
| 4 | NRST | Input |
| 5 | VDDA | Power in |
| 6 | PA0 | Input/output |
| 7 | PA1 | Input/output |
| 8 | PA2 | Input/output |
| 9 | PA3 | Input/output |
| 10 | PA4 | Input/output |
| 11 | PA5 | Input/output |
| 12 | PA6 | Input/output |
| 13 | PA7 | Input/output |
| 14 | PB1 | Input/output |
| 15 | VSSA | Power in |
| 16 | VDD | Power in |
| 17 | PA9/PA11 | Input/output |
| 18 | PA10/PA12 | Input/output |
| 19 | PA13 | Input/output |
| 20 | PA14 | Input/output |
Open-source boards using it
All 19- 2 layers120.4 × 100.4 mm
Relaymux
PetteriAimonen/relaymux
Hardware and firmware for a USB connected relay box
59 parts18BSD-2-Clause - 2 layers15.9 × 25 mm
IMU
abstractfoundry/lumicube-boards
PCB and firmware design files for some of the LumiCube components
26 parts - 2 layers100 × 73.3 mm
Pride Badge
aziraphale/pride-badge-v1
🌈⚡Pride badge PCB with LEDs, STM32, and 3D printed diffuser+case!
136 parts - 2 layers20 × 38.5 mm
Arm tiny pcb
Chicken-Fried/STM32-NanoCortex
Ultra-compact USB-C development board powered by STM32F042 (ARM Cortex-M0) with native DFU, ceramic-only LDO power stage & CaveRover branding.
29 partsCERN-OHL-S-2.0 - 2 layers21 × 14.4 mm
Hub imu
ckemere/usb-imu
USB IMU for camera rigs: BNO055 module (STM32F042) and an FE1.1S hub carrier with JST-GH camera ports. KiCad 9.
19 partsCERN-OHL-P-2.0 - 2 layers135 × 21 mm
Usbc pd airsoft module
Fluffik214/airsoft-battery-module
This is a USB-C PD charger and cell monitor for a 3S LiPo that lives in an airsoft stock tube. It has one USB-C port.
98 parts - 2 layers46.2 × 36.8 mm
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/st/STM32F042F6P6" title="STM32F042F6P6 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/st/STM32F042F6P6.jpg" alt="STM32F042F6P6" width="1200" height="900">[](https://pcbkit.io/parts/st/STM32F042F6P6)Questions
Is there a KiCad symbol and footprint for the STM32F042F6P6?
Yes. The symbol is MCU_ST_STM32F0:STM32F042F6Px and the footprint Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the STM32F042F6P6?
TSSOP-20(4.4x6.5), with 20 pins. Its footprint is drawn on this page.
Where is the STM32F042F6P6 datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the STM32F042F6P6?
JLCPCB lists it as part C2969989, with 3,201 in stock; the sellers' links on this page open their listings.
What can replace the STM32F042F6P6?
Parts like it in the library: the STM32F030F4P6 by STMicroelectronics, the CH32V003F4P6 by WCH (Nanjing Qinheng Microelectronics), the STM32G030F6P6 by STMicroelectronics and the STM32F042F4P6 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the STM32F042F6P6?
19 boards in 16 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
Parts like it
8
STM32F030F4P6
TSSOP-20-40℃~+85℃ 12bit 15 16KB 2.4V~3.6V 32 Bit 48MHz 4KB ARM Cortex-M0 Built-in FLASH TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)CH32V003F4P6
TSSOP-20-175milTSSOP-20-175mil Microcontrollers (MCU/MPU/SOC) ROHSWCH (Nanjing Qinheng Microelectronics)Microcontrollers (MCU/MPU/SOC)STM32G030F6P6
TSSOP-20-40℃~+85℃ 12bit 17 2V~3.6V 32 Bit 32KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32F042F4P6
TSSOP-20(4.4x6.4)-40℃~+85℃ 1.65V~3.6V 12bit 16 16KB 32 Bit 48MHz 6KB ARM Cortex-M0 Built-in FLASH TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32G031F8P6
TSSOP-20-40℃~+85℃ 1.7V~3.6V 12bit 18 32 Bit 64KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32C011F6P6
TSSOP-20-40℃~+85℃ 12bit 18 2V~3.6V 32 Bit 32KB 48MHz 6KB ARM Cortex-M0+ Built-in+External FLASH TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)CH32X033F8P6
TSSOP-20TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSWCH (Nanjing Qinheng Microelectronics)Microcontrollers (MCU/MPU/SOC)AT32F421F8P7
TSSOP-20-40℃~+105℃ 120MHz 15 16KB 64KB ARM Cortex-M4 TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSARTERYMicrocontrollers (MCU/MPU/SOC)