
OM-64DO
OpenModbus/OM-64DO
A compact industrial-grade 64-channel Modbus RTU output module.
STMicroelectronicsExtended
-40℃~+85℃ 1.7V~3.6V 12bit 18 32 Bit 64KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHS
The STM32G031F8P6 is a microcontroller made by STMicroelectronics in a TSSOP-20 package with 20 pins. -40℃~+85℃ 1.7V~3.6V 12bit 18 32 Bit 64KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32G0:STM32G031F8Px, from KiCad's library) and its footprint (Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 4,755 are in stock at JLCPCB (part C529334). 11 open-source boards in 8 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| External supply voltage VDD | Absolute maximum ratings | min -0.3 · max 4 V | 45 |
| External supply voltage on VBAT pin VBAT | Absolute maximum ratings | min -0.3 · max 4 V | 45 |
| External voltage on VREF+ pin VREF+ | Absolute maximum ratings; maximum Min(VDD + 0.4, 4.0) V | min -0.3 V | 45 |
| Input voltage on FT_xx VIN | Absolute maximum ratings; maximum VDD + 4.0 V; internal pull-up/pull-down disabled above 4 V | min -0.3 V | 45 |
| Input voltage on any other pin VIN | Absolute maximum ratings | min -0.3 · max 4 V | 45 |
| Current into VDD/VDDA power pin (source) IVDD/VDDA | Absolute maximum ratings | max 100 mA | 46 |
| Current out of VSS/VSSA ground pin (sink) IVSS/VSSA | Absolute maximum ratings | max 100 mA | 46 |
| Output current sunk by any I/O and control pin except FT_f IIO(PIN) | Absolute maximum ratings | max 15 mA | 46 |
| Output current sunk by any FT_f pin IIO(PIN) | Absolute maximum ratings | max 20 mA | 46 |
| Output current sourced by any I/O and control pin IIO(PIN) | Absolute maximum ratings | max 15 mA | 46 |
| Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN) | Absolute maximum ratings | max 80 mA | 46 |
| Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN) | Absolute maximum ratings | max 80 mA | 46 |
| Injected current on a FT_xx pin IINJ(PIN) | Absolute maximum ratings; negative injection limit -5 mA; positive injection NA | max -5 mA | 46 |
| Total injected current (sum of all I/Os and control pins) ∑|IINJ(PIN)| | Absolute maximum ratings; absolute sum of negative injected currents | max 25 mA | 46 |
| Storage temperature range TSTG | Absolute maximum ratings | min -65 · max 150 °C | 46 |
| Maximum junction temperature TJ | Absolute maximum ratings | max 150 °C | 46 |
| Internal AHB clock frequency fHCLK | min 0 · max 64 MHz | 46 | |
| Internal APB clock frequency fPCLK | min 0 · max 64 MHz | 46 | |
| Standard operating voltage VDD | min 1.7 · max 3.6 V | 46 | |
| Analog supply voltage VDDA | For ADC operation | min 1.62 · max 3.6 V | 46 |
| Analog supply voltage VDDA | For VREFBUF operation | min 2.4 · max 3.6 V | 46 |
| Backup operating voltage VBAT | min 1.55 · max 3.6 V | 46 | |
| I/O input voltage VIN | Maximum Min(VDD + 3.6, 5.5) V; internal pull-up and pull-down disabled above VDD + 0.3 V | min -0.3 V | 46 |
| Ambient temperature TA | Suffix 6 | min -40 · max 85 °C | 47 |
| Junction temperature TJ | Suffix 6 | min -40 · max 105 °C | 47 |
| VDD slew rate tVDD | VDD falling; ULPEN = 0; maximum ∞ | min 10 us/V | 47 |
| VDD slew rate tVDD | VDD falling; ULPEN = 1; maximum ∞ | min 100 ms/V | 47 |
| POR temporization when VDD crosses VPOR tRSTTEMPO | VDD rising | typ 250 · max 400 us | 47 |
| Power-on reset threshold VPOR | min 1.62 · typ 1.66 · max 1.7 V | 47 | |
| Power-down reset threshold VPDR | min 1.6 · typ 1.64 · max 1.69 V | 47 | |
| Brownout reset threshold 1 VBOR1 | VDD rising | min 2.05 · typ 2.1 · max 2.18 V | 47 |
| Brownout reset threshold 1 VBOR1 | VDD falling | min 1.95 · typ 2 · max 2.08 V | 47 |
| Brownout reset threshold 2 VBOR2 | VDD rising | min 2.2 · typ 2.31 · max 2.38 V | 47 |
| Brownout reset threshold 2 VBOR2 | VDD falling | min 2.1 · typ 2.21 · max 2.28 V | 47 |
| Brownout reset threshold 3 VBOR3 | VDD rising | min 2.5 · typ 2.62 · max 2.68 V | 47 |
| Brownout reset threshold 3 VBOR3 | VDD falling | min 2.4 · typ 2.52 · max 2.58 V | 47 |
| Supply current in Run mode IDD(Run) | Range 1; Flash memory; 64 MHz; PLL enabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 5.2 · max 6.7 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; Flash memory; 64 MHz; PLL enabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 5.4 · max 6.9 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; Flash memory; 56 MHz; PLL enabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 4.7 · max 5.9 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; Flash memory; 56 MHz; PLL enabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 4.8 · max 6 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; Flash memory; 48 MHz; PLL enabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 4.2 · max 4.8 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; Flash memory; 48 MHz; PLL enabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 4.3 · max 5 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; Flash memory; 32 MHz; PLL enabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 2.9 · max 3.8 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; Flash memory; 32 MHz; PLL enabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 3 · max 4.1 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; Flash memory; 24 MHz; PLL enabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 2.3 · max 2.9 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; Flash memory; 24 MHz; PLL enabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 2.4 · max 3.2 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; Flash memory; 16 MHz HSE bypass; PLL enabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 1.5 · max 2.1 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; Flash memory; 16 MHz HSE bypass; PLL enabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 1.5 · max 2.4 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; SRAM; 64 MHz; PLL enabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 4.3 · max 6 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; SRAM; 64 MHz; PLL enabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 4.4 · max 6.2 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; SRAM; 56 MHz; PLL enabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 3.8 · max 5.4 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; SRAM; 56 MHz; PLL enabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 3.9 · max 5.6 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; SRAM; 48 MHz; PLL enabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 3.4 · max 4.8 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; SRAM; 48 MHz; PLL enabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 3.5 · max 5 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; SRAM; 32 MHz; PLL enabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 2.4 · max 3.4 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; SRAM; 32 MHz; PLL enabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 2.5 · max 3.6 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; SRAM; 24 MHz; PLL enabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 1.9 · max 2.7 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; SRAM; 24 MHz; PLL enabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 1.9 · max 2.9 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; SRAM; 16 MHz HSE bypass; PLL enabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 1.2 · max 1.9 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; SRAM; 16 MHz HSE bypass; PLL enabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 1.2 · max 2 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; Flash memory; 16 MHz HSE bypass; PLL enabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 1.2 · max 1.6 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; Flash memory; 16 MHz HSE bypass; PLL enabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 1.2 · max 1.9 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; Flash memory; 8 MHz HSE bypass; PLL enabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 0.7 · max 1.1 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; Flash memory; 8 MHz HSE bypass; PLL enabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 0.7 · max 1.3 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; Flash memory; 2 MHz HSE bypass; PLL enabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 0.2 · max 0.5 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; Flash memory; 2 MHz HSE bypass; PLL enabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 0.3 · max 0.8 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; SRAM; 16 MHz HSE bypass; PLL enabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 1 · max 1.5 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; SRAM; 16 MHz HSE bypass; PLL enabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 1 · max 1.7 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; SRAM; 8 MHz HSE bypass; PLL enabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 0.5 · max 1 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; SRAM; 8 MHz HSE bypass; PLL enabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 0.6 · max 1.1 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; SRAM; 2 MHz HSE bypass; PLL enabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 0.2 · max 0.5 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; SRAM; 2 MHz HSE bypass; PLL enabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 0.3 · max 0.7 mA | 50 |
| Supply current in Low-power run mode IDD(LPRun) | Flash memory; 2 MHz HSE bypass; PLL disabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 165 · max 470 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | Flash memory; 2 MHz HSE bypass; PLL disabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 205 · max 660 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | Flash memory; 1 MHz HSE bypass; PLL disabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 90 · max 400 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | Flash memory; 1 MHz HSE bypass; PLL disabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 120 · max 580 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | Flash memory; 500 kHz HSE bypass; PLL disabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 53 · max 360 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | Flash memory; 500 kHz HSE bypass; PLL disabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 81 · max 530 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | Flash memory; 32 kHz LSE bypass; PLL disabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 16 · max 270 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | Flash memory; 32 kHz LSE bypass; PLL disabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 43 · max 400 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | SRAM; 2 MHz HSE bypass; PLL disabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 146 · max 460 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | SRAM; 2 MHz HSE bypass; PLL disabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 174 · max 660 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | SRAM; 1 MHz HSE bypass; PLL disabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 83 · max 390 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | SRAM; 1 MHz HSE bypass; PLL disabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 104 · max 630 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | SRAM; 500 kHz HSE bypass; PLL disabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 44 · max 340 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | SRAM; 500 kHz HSE bypass; PLL disabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 74 · max 590 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | SRAM; 125 kHz HSE bypass; PLL disabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 19 · max 300 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | SRAM; 125 kHz HSE bypass; PLL disabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 46 · max 420 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | SRAM; 32 kHz LSE bypass; PLL disabled; 25 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 14 · max 260 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | SRAM; 32 kHz LSE bypass; PLL disabled; 85 °C; typ VDD=3.0 V, max VDD=3.6 V; peripherals disabled | typ 34 · max 340 uA | 51 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz PLLRCLK; Flash memory; Reduced code; 25 °C; VDD=3.3 V; peripherals disabled | typ 5.4 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz PLLRCLK; Flash memory; Coremark; 25 °C; VDD=3.3 V; peripherals disabled | typ 5.2 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz PLLRCLK; Flash memory; Dhrystone 2.1; 25 °C; VDD=3.3 V; peripherals disabled | typ 5.3 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz PLLRCLK; Flash memory; Fibonacci; 25 °C; VDD=3.3 V; peripherals disabled | typ 4.3 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz PLLRCLK; Flash memory; While(1) loop; 25 °C; VDD=3.3 V; peripherals disabled | typ 4 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz PLLRCLK; SRAM; Reduced code; 25 °C; VDD=3.3 V; peripherals disabled | typ 4.4 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz PLLRCLK; SRAM; Coremark; 25 °C; VDD=3.3 V; peripherals disabled | typ 5.6 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz PLLRCLK; SRAM; Dhrystone 2.1; 25 °C; VDD=3.3 V; peripherals disabled | typ 5.6 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz PLLRCLK; SRAM; Fibonacci; 25 °C; VDD=3.3 V; peripherals disabled | typ 4.3 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz PLLRCLK; SRAM; While(1) loop; 25 °C; VDD=3.3 V; peripherals disabled | typ 4 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz HSI16; PLL disabled; Flash memory; Reduced code; 25 °C; VDD=3.3 V; peripherals disabled | typ 1.6 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz HSI16; PLL disabled; Flash memory; Coremark; 25 °C; VDD=3.3 V; peripherals disabled | typ 1.5 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz HSI16; PLL disabled; Flash memory; Dhrystone 2.1; 25 °C; VDD=3.3 V; peripherals disabled | typ 1.5 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz HSI16; PLL disabled; Flash memory; Fibonacci; 25 °C; VDD=3.3 V; peripherals disabled | typ 1.1 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz HSI16; PLL disabled; Flash memory; While(1) loop; 25 °C; VDD=3.3 V; peripherals disabled | typ 1 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz HSI16; PLL disabled; SRAM; Reduced code; 25 °C; VDD=3.3 V; peripherals disabled | typ 1.3 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz HSI16; PLL disabled; SRAM; Coremark; 25 °C; VDD=3.3 V; peripherals disabled | typ 1.4 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz HSI16; PLL disabled; SRAM; Dhrystone 2.1; 25 °C; VDD=3.3 V; peripherals disabled | typ 1.4 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz HSI16; PLL disabled; SRAM; Fibonacci; 25 °C; VDD=3.3 V; peripherals disabled | typ 1 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz HSI16; PLL disabled; SRAM; While(1) loop; 25 °C; VDD=3.3 V; peripherals disabled | typ 1 mA | 52 |
| Supply current in Low-power run mode IDD(LPRun) | 2 MHz HSI16/8; PLL disabled; Flash memory; Reduced code; 25 °C; VDD=3.3 V; peripherals disabled | typ 345 uA | 52 |
| Supply current in Low-power run mode IDD(LPRun) | 2 MHz HSI16/8; PLL disabled; Flash memory; Coremark; 25 °C; VDD=3.3 V; peripherals disabled | typ 400 uA | 52 |
| Supply current in Low-power run mode IDD(LPRun) | 2 MHz HSI16/8; PLL disabled; Flash memory; Dhrystone 2.1; 25 °C; VDD=3.3 V; peripherals disabled | typ 400 uA | 52 |
| Supply current in Low-power run mode IDD(LPRun) | 2 MHz HSI16/8; PLL disabled; Flash memory; Fibonacci; 25 °C; VDD=3.3 V; peripherals disabled | typ 365 uA | 52 |
| Supply current in Low-power run mode IDD(LPRun) | 2 MHz HSI16/8; PLL disabled; Flash memory; While(1) loop; 25 °C; VDD=3.3 V; peripherals disabled | typ 415 uA | 52 |
| Supply current in Low-power run mode IDD(LPRun) | 2 MHz HSI16/8; PLL disabled; SRAM; Reduced code; 25 °C; VDD=3.3 V; peripherals disabled | typ 225 uA | 52 |
| Supply current in Low-power run mode IDD(LPRun) | 2 MHz HSI16/8; PLL disabled; SRAM; Coremark; 25 °C; VDD=3.3 V; peripherals disabled | typ 515 uA | 52 |
| Supply current in Low-power run mode IDD(LPRun) | 2 MHz HSI16/8; PLL disabled; SRAM; Dhrystone 2.1; 25 °C; VDD=3.3 V; peripherals disabled | typ 515 uA | 52 |
| Supply current in Low-power run mode IDD(LPRun) | 2 MHz HSI16/8; PLL disabled; SRAM; Fibonacci; 25 °C; VDD=3.3 V; peripherals disabled | typ 295 uA | 52 |
| Supply current in Low-power run mode IDD(LPRun) | 2 MHz HSI16/8; PLL disabled; SRAM; While(1) loop; 25 °C; VDD=3.3 V; peripherals disabled | typ 290 uA | 52 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 64 MHz PLL; Flash enabled; peripherals disabled; 25 °C | typ 1.3 · max 1.8 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 64 MHz PLL; Flash enabled; peripherals disabled; 85 °C | typ 1.4 · max 2 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 56 MHz PLL; Flash enabled; peripherals disabled; 25 °C | typ 1.2 · max 1.6 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 56 MHz PLL; Flash enabled; peripherals disabled; 85 °C | typ 1.3 · max 1.8 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 48 MHz PLL; Flash enabled; peripherals disabled; 25 °C | typ 1.1 · max 1.5 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 48 MHz PLL; Flash enabled; peripherals disabled; 85 °C | typ 1.1 · max 1.6 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 32 MHz PLL; Flash enabled; peripherals disabled; 25 °C | typ 0.8 · max 1.2 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 32 MHz PLL; Flash enabled; peripherals disabled; 85 °C | typ 0.8 · max 1.2 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 24 MHz PLL; Flash enabled; peripherals disabled; 25 °C | typ 0.7 · max 0.9 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 24 MHz PLL; Flash enabled; peripherals disabled; 85 °C | typ 0.7 · max 1 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 16 MHz HSE bypass; PLL disabled; Flash enabled; peripherals disabled; 25 °C | typ 0.4 · max 0.6 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; 16 MHz HSE bypass; PLL disabled; Flash enabled; peripherals disabled; 85 °C | typ 0.4 · max 0.7 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 2; 16 MHz HSE bypass; PLL disabled; Flash enabled; peripherals disabled; 25 °C | typ 0.3 · max 0.5 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 2; 16 MHz HSE bypass; PLL disabled; Flash enabled; peripherals disabled; 85 °C | typ 0.4 · max 0.6 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 2; 8 MHz HSE bypass; PLL disabled; Flash enabled; peripherals disabled; 25 °C | typ 0.2 · max 0.3 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 2; 8 MHz HSE bypass; PLL disabled; Flash enabled; peripherals disabled; 85 °C | typ 0.3 · max 0.5 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 2; 2 MHz HSE bypass; PLL disabled; Flash enabled; peripherals disabled; 25 °C | typ 0.1 · max 0.2 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 2; 2 MHz HSE bypass; PLL disabled; Flash enabled; peripherals disabled; 85 °C | typ 0.2 · max 0.4 mA | 53 |
| Supply current in Low-power sleep mode IDD(LPSleep) | 2 MHz HSE bypass; Flash and PLL disabled; peripherals disabled; 25 °C | typ 40 · max 145 uA | 53 |
| Supply current in Low-power sleep mode IDD(LPSleep) | 2 MHz HSE bypass; Flash and PLL disabled; peripherals disabled; 85 °C | typ 70 · max 340 uA | 53 |
| Supply current in Low-power sleep mode IDD(LPSleep) | 1 MHz HSE bypass; Flash and PLL disabled; peripherals disabled; 25 °C | typ 27 · max 125 uA | 53 |
| Supply current in Low-power sleep mode IDD(LPSleep) | 1 MHz HSE bypass; Flash and PLL disabled; peripherals disabled; 85 °C | typ 55 · max 315 uA | 53 |
| Supply current in Low-power sleep mode IDD(LPSleep) | 500 kHz HSE bypass; Flash and PLL disabled; peripherals disabled; 25 °C | typ 21 · max 120 uA | 53 |
| Supply current in Low-power sleep mode IDD(LPSleep) | 500 kHz HSE bypass; Flash and PLL disabled; peripherals disabled; 85 °C | typ 47 · max 240 uA | 53 |
| Supply current in Low-power sleep mode IDD(LPSleep) | 125 kHz HSE bypass; Flash and PLL disabled; peripherals disabled; 25 °C | typ 15 · max 110 uA | 53 |
| Supply current in Low-power sleep mode IDD(LPSleep) | 125 kHz HSE bypass; Flash and PLL disabled; peripherals disabled; 85 °C | typ 42 · max 225 uA | 53 |
| Supply current in Low-power sleep mode IDD(LPSleep) | 32 kHz LSE bypass; Flash and PLL disabled; peripherals disabled; 25 °C | typ 12 · max 105 uA | 53 |
| Supply current in Low-power sleep mode IDD(LPSleep) | 32 kHz LSE bypass; Flash and PLL disabled; peripherals disabled; 85 °C | typ 40 · max 215 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel enabled; VDD=1.8 V; 25°C | typ 265 · max 330 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel enabled; VDD=1.8 V; 85°C | typ 290 · max 420 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel enabled; VDD=2.4 V; 25°C | typ 265 · max 330 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel enabled; VDD=2.4 V; 85°C | typ 290 · max 450 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel enabled; VDD=3 V; 25°C | typ 270 · max 345 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel enabled; VDD=3 V; 85°C | typ 295 · max 485 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel enabled; VDD=3.6 V; 25°C | typ 270 · max 370 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel enabled; VDD=3.6 V; 85°C | typ 295 · max 495 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel disabled; VDD=1.8 V; 25°C | typ 92 · max 120 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel disabled; VDD=1.8 V; 85°C | typ 130 · max 180 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel disabled; VDD=2.4 V; 25°C | typ 95 · max 120 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel disabled; VDD=2.4 V; 85°C | typ 130 · max 220 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel disabled; VDD=3 V; 25°C | typ 97 · max 125 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel disabled; VDD=3 V; 85°C | typ 135 · max 235 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel disabled; VDD=3.6 V; 25°C | typ 99 · max 125 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel disabled; VDD=3.6 V; 85°C | typ 135 · max 245 uA | 53 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC disabled; VDD=1.8 V; 25°C | typ 2.9 · max 9 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC disabled; VDD=1.8 V; 85°C | typ 25 · max 95 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC disabled; VDD=2.4 V; 25°C | typ 3.1 · max 11 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC disabled; VDD=2.4 V; 85°C | typ 26 · max 110 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC disabled; VDD=3 V; 25°C | typ 3.3 · max 16 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC disabled; VDD=3 V; 85°C | typ 26 · max 120 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC disabled; VDD=3.6 V; 25°C | typ 3.6 · max 20 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC disabled; VDD=3.6 V; 85°C | typ 26 · max 130 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC enabled, LSI; VDD=1.8 V; 25°C | typ 3.3 · max 11 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC enabled, LSI; VDD=1.8 V; 85°C | typ 25 · max 95 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC enabled, LSI; VDD=2.4 V; 25°C | typ 3.6 · max 14 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC enabled, LSI; VDD=2.4 V; 85°C | typ 26 · max 110 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC enabled, LSI; VDD=3 V; 25°C | typ 3.7 · max 18 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC enabled, LSI; VDD=3 V; 85°C | typ 26 · max 120 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC enabled, LSI; VDD=3.6 V; 25°C | typ 4.2 · max 23 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC enabled, LSI; VDD=3.6 V; 85°C | typ 27 · max 130 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash powered; RTC disabled; VDD=1.8 V; 25°C | typ 7 · max 17 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash powered; RTC disabled; VDD=1.8 V; 85°C | typ 30 · max 130 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash powered; RTC disabled; VDD=2.4 V; 25°C | typ 7.3 · max 18 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash powered; RTC disabled; VDD=2.4 V; 85°C | typ 30 · max 135 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash powered; RTC disabled; VDD=3 V; 25°C | typ 7.5 · max 19 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash powered; RTC disabled; VDD=3 V; 85°C | typ 30 · max 140 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash powered; RTC disabled; VDD=3.6 V; 25°C | typ 7.8 · max 23 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash powered; RTC disabled; VDD=3.6 V; 85°C | typ 31 · max 140 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; no SRAM retention; ULPEN set; VDD=1.8 V; 25°C | typ 0.1 · max 0.7 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; no SRAM retention; ULPEN set; VDD=1.8 V; 85°C | typ 1.5 · max 9 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; no SRAM retention; ULPEN set; VDD=2.4 V; 25°C | typ 0.1 · max 0.7 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; no SRAM retention; ULPEN set; VDD=2.4 V; 85°C | typ 1.8 · max 11 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; no SRAM retention; ULPEN set; VDD=3.0 V; 25°C | typ 0.2 · max 0.9 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; no SRAM retention; ULPEN set; VDD=3.0 V; 85°C | typ 2.1 · max 14 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; no SRAM retention; ULPEN set; VDD=3.6 V; 25°C | typ 0.4 · max 1 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; no SRAM retention; ULPEN set; VDD=3.6 V; 85°C | typ 2.5 · max 16 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, LSI; no SRAM retention; ULPEN set; VDD=1.8 V; 25°C | typ 0.3 · max 0.8 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, LSI; no SRAM retention; ULPEN set; VDD=1.8 V; 85°C | typ 1.7 · max 14 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, LSI; no SRAM retention; ULPEN set; VDD=2.4 V; 25°C | typ 0.4 · max 1 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, LSI; no SRAM retention; ULPEN set; VDD=2.4 V; 85°C | typ 2.1 · max 14 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, LSI; no SRAM retention; ULPEN set; VDD=3.0 V; 25°C | typ 0.6 · max 1.2 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, LSI; no SRAM retention; ULPEN set; VDD=3.0 V; 85°C | typ 2.5 · max 16 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, LSI; no SRAM retention; ULPEN set; VDD=3.6 V; 25°C | typ 0.8 · max 1.6 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, LSI; no SRAM retention; ULPEN set; VDD=3.6 V; 85°C | typ 3 · max 16 uA | 54 |
| Supply current in Standby mode IDD(Standby) | IWDG enabled, LSI; no SRAM retention; ULPEN set; VDD=1.8 V; 25°C | typ 0.2 · max 0.8 uA | 54 |
| Supply current in Standby mode IDD(Standby) | IWDG enabled, LSI; no SRAM retention; ULPEN set; VDD=1.8 V; 85°C | typ 1.6 · max 10 uA | 54 |
| Supply current in Standby mode IDD(Standby) | IWDG enabled, LSI; no SRAM retention; ULPEN set; VDD=2.4 V; 25°C | typ 0.3 · max 0.8 uA | 54 |
| Supply current in Standby mode IDD(Standby) | IWDG enabled, LSI; no SRAM retention; ULPEN set; VDD=2.4 V; 85°C | typ 2 · max 12 uA | 54 |
| Supply current in Standby mode IDD(Standby) | IWDG enabled, LSI; no SRAM retention; ULPEN set; VDD=3.0 V; 25°C | typ 0.4 · max 1.1 uA | 54 |
| Supply current in Standby mode IDD(Standby) | IWDG enabled, LSI; no SRAM retention; ULPEN set; VDD=3.0 V; 85°C | typ 2.4 · max 14 uA | 54 |
| Supply current in Standby mode IDD(Standby) | IWDG enabled, LSI; no SRAM retention; ULPEN set; VDD=3.6 V; 25°C | typ 0.7 · max 1.7 uA | 54 |
| Supply current in Standby mode IDD(Standby) | IWDG enabled, LSI; no SRAM retention; ULPEN set; VDD=3.6 V; 85°C | typ 2.8 · max 17 uA | 54 |
| Supply current in Standby mode IDD(Standby) | ULPEN=0; no SRAM retention; VDD=1.8 V; 25°C | typ 0.7 · max 1 uA | 54 |
| Supply current in Standby mode IDD(Standby) | ULPEN=0; no SRAM retention; VDD=1.8 V; 85°C | typ 1.4 · max 9 uA | 54 |
| Supply current in Standby mode IDD(Standby) | ULPEN=0; no SRAM retention; VDD=2.4 V; 25°C | typ 0.9 · max 1 uA | 54 |
| Supply current in Standby mode IDD(Standby) | ULPEN=0; no SRAM retention; VDD=2.4 V; 85°C | typ 1.7 · max 10 uA | 54 |
| Supply current in Standby mode IDD(Standby) | ULPEN=0; no SRAM retention; VDD=3.0 V; 25°C | typ 1.1 · max 1.4 uA | 54 |
| Supply current in Standby mode IDD(Standby) | ULPEN=0; no SRAM retention; VDD=3.0 V; 85°C | typ 2 · max 10 uA | 54 |
| Supply current in Standby mode IDD(Standby) | ULPEN=0; no SRAM retention; VDD=3.6 V; 25°C | typ 1.3 · max 1.5 uA | 54 |
| Supply current in Standby mode IDD(Standby) | ULPEN=0; no SRAM retention; VDD=3.6 V; 85°C | typ 2.4 · max 12 uA | 54 |
| Extra supply current to retain SRAM content ∆IDD(SRAM) | SRAM retention enabled; add to IDD(Standby); VDD=1.8 V; 25°C | typ 0.3 · max 0.4 uA | 55 |
| Extra supply current to retain SRAM content ∆IDD(SRAM) | SRAM retention enabled; add to IDD(Standby); VDD=1.8 V; 85°C | typ 0.8 · max 7 uA | 55 |
| Extra supply current to retain SRAM content ∆IDD(SRAM) | SRAM retention enabled; add to IDD(Standby); VDD=2.4 V; 25°C | typ 0.4 · max 0.9 uA | 55 |
| Extra supply current to retain SRAM content ∆IDD(SRAM) | SRAM retention enabled; add to IDD(Standby); VDD=2.4 V; 85°C | typ 0.9 · max 8 uA | 55 |
| Extra supply current to retain SRAM content ∆IDD(SRAM) | SRAM retention enabled; add to IDD(Standby); VDD=3.0 V; 25°C | typ 0.5 · max 1.3 uA | 55 |
| Extra supply current to retain SRAM content ∆IDD(SRAM) | SRAM retention enabled; add to IDD(Standby); VDD=3.0 V; 85°C | typ 1 · max 8 uA | 55 |
| Extra supply current to retain SRAM content ∆IDD(SRAM) | SRAM retention enabled; add to IDD(Standby); VDD=3.6 V; 25°C | typ 0.6 · max 1.3 uA | 55 |
| Extra supply current to retain SRAM content ∆IDD(SRAM) | SRAM retention enabled; add to IDD(Standby); VDD=3.6 V; 85°C | typ 1.1 · max 9 uA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC disabled; VDD=1.8 V; 25 °C | typ 12 · max 250 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC disabled; VDD=1.8 V; 85 °C | typ 370 · max 2700 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC disabled; VDD=2.4 V; 25 °C | typ 18 · max 450 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC disabled; VDD=2.4 V; 85 °C | typ 430 · max 3000 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC disabled; VDD=3.0 V; 25 °C | typ 25 · max 800 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC disabled; VDD=3.0 V; 85 °C | typ 500 · max 3700 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC disabled; VDD=3.6 V; 25 °C | typ 42 · max 900 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC disabled; VDD=3.6 V; 85 °C | typ 620 · max 4500 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC enabled, LSE bypass at 32.768 kHz; VDD=1.8 V; 25 °C | typ 185 · max 850 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC enabled, LSE bypass at 32.768 kHz; VDD=1.8 V; 85 °C | typ 550 · max 2700 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC enabled, LSE bypass at 32.768 kHz; VDD=2.4 V; 25 °C | typ 265 · max 1450 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC enabled, LSE bypass at 32.768 kHz; VDD=2.4 V; 85 °C | typ 675 · max 3000 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC enabled, LSE bypass at 32.768 kHz; VDD=3.0 V; 25 °C | typ 350 · max 2350 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC enabled, LSE bypass at 32.768 kHz; VDD=3.0 V; 85 °C | typ 835 · max 3700 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC enabled, LSE bypass at 32.768 kHz; VDD=3.6 V; 25 °C | typ 460 · max 3100 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC enabled, LSE bypass at 32.768 kHz; VDD=3.6 V; 85 °C | typ 1050 · max 4400 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE bypass at 32.768 kHz; VDD column=1.8 V; 25°C | typ 180 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE bypass at 32.768 kHz; VDD column=1.8 V; 85°C | typ 240 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE bypass at 32.768 kHz; VDD column=2.4 V; 25°C | typ 250 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE bypass at 32.768 kHz; VDD column=2.4 V; 85°C | typ 330 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE bypass at 32.768 kHz; VDD column=3.0 V; 25°C | typ 330 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE bypass at 32.768 kHz; VDD column=3.0 V; 85°C | typ 420 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE bypass at 32.768 kHz; VDD column=3.6 V; 25°C | typ 430 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE bypass at 32.768 kHz; VDD column=3.6 V; 85°C | typ 550 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE crystal at 32.768 kHz; VDD column=1.8 V; 25°C | typ 300 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE crystal at 32.768 kHz; VDD column=1.8 V; 85°C | typ 360 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE crystal at 32.768 kHz; VDD column=2.4 V; 25°C | typ 380 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE crystal at 32.768 kHz; VDD column=2.4 V; 85°C | typ 420 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE crystal at 32.768 kHz; VDD column=3.0 V; 25°C | typ 460 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE crystal at 32.768 kHz; VDD column=3.0 V; 85°C | typ 480 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE crystal at 32.768 kHz; VDD column=3.6 V; 25°C | typ 580 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE crystal at 32.768 kHz; VDD column=3.6 V; 85°C | typ 700 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC disabled; VDD column=1.8 V; 25°C | typ 1 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC disabled; VDD column=1.8 V; 85°C | typ 59 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC disabled; VDD column=2.4 V; 25°C | typ 1 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC disabled; VDD column=2.4 V; 85°C | typ 68 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC disabled; VDD column=3.0 V; 25°C | typ 2 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC disabled; VDD column=3.0 V; 85°C | typ 78 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC disabled; VDD column=3.6 V; 25°C | typ 5 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC disabled; VDD column=3.6 V; 85°C | typ 97 nA | 55 |
| Thermal resistance Θ | TSSOP20 6.4 × 4.4 mm; Junction-to-ambient | typ 94 °C/W | 116 |
| Thermal resistance Θ | TSSOP20 6.4 × 4.4 mm; Junction-to-board | typ 55 °C/W | 116 |
| Thermal resistance Θ | TSSOP20 6.4 × 4.4 mm; Junction-to-case | typ 26 °C/W | 116 |
| External supply voltage VDD | min -0.3 · max 4 V | 45 | |
| External supply voltage on VBAT pin VBAT | min -0.3 · max 4 V | 45 | |
| External voltage on VREF+ pin VREF+ | Maximum: Min(VDD + 0.4, 4.0) V | min -0.3 V | 45 |
| Input voltage on FT_xx VIN | Maximum: VDD + 4.0 V; internal pull-up/pull-down resistors disabled above 4 V | min -0.3 V | 45 |
| Input voltage on any other pin VIN | min -0.3 · max 4 V | 45 | |
| Current into VDD/VDDA power pin (source) IVDD/VDDA | max 100 mA | 46 | |
| Current out of VSS/VSSA ground pin (sink) IVSS/VSSA | max 100 mA | 46 | |
| Output current sunk by any I/O and control pin except FT_f IIO(PIN) | max 15 mA | 46 | |
| Output current sunk by any FT_f pin IIO(PIN) | max 20 mA | 46 | |
| Output current sourced by any I/O and control pin IIO(PIN) | max 15 mA | 46 | |
| Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN) | max 80 mA | 46 | |
| Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN) | max 80 mA | 46 | |
| Injected current on a FT_xx pin IINJ(PIN) | Negative injection limit -5 mA; positive injection NA | max -5 mA | 46 |
| Total injected current (sum of all I/Os and control pins) ∑|IINJ(PIN)| | Absolute sum of negative injected currents | max 25 mA | 46 |
| Storage temperature range TSTG | min -65 · max 150 °C | 46 | |
| Maximum junction temperature TJ | max 150 °C | 46 | |
| I/O input voltage VIN | Maximum: Min(VDD + 3.6, 5.5) V | min -0.3 V | 46 |
| Brownout reset threshold 4 VBOR4 | VDD rising | min 2.8 · typ 2.91 · max 3 V | 48 |
| Brownout reset threshold 4 VBOR4 | VDD falling | min 2.7 · typ 2.81 · max 2.9 V | 48 |
| Programmable voltage detector threshold 0 VPVD0 | VDD rising | min 2.05 · typ 2.15 · max 2.22 V | 48 |
| Programmable voltage detector threshold 0 VPVD0 | VDD falling | min 1.95 · typ 2.05 · max 2.12 V | 48 |
| PVD threshold 1 VPVD1 | VDD rising | min 2.2 · typ 2.3 · max 2.37 V | 48 |
| PVD threshold 1 VPVD1 | VDD falling | min 2.1 · typ 2.2 · max 2.27 V | 48 |
| PVD threshold 2 VPVD2 | VDD rising | min 2.35 · typ 2.46 · max 2.54 V | 48 |
| PVD threshold 2 VPVD2 | VDD falling | min 2.25 · typ 2.36 · max 2.44 V | 48 |
| PVD threshold 3 VPVD3 | VDD rising | min 2.5 · typ 2.62 · max 2.7 V | 48 |
| PVD threshold 3 VPVD3 | VDD falling | min 2.4 · typ 2.52 · max 2.6 V | 48 |
| PVD threshold 4 VPVD4 | VDD rising | min 2.65 · typ 2.74 · max 2.87 V | 48 |
| PVD threshold 4 VPVD4 | VDD falling | min 2.55 · typ 2.64 · max 2.77 V | 48 |
| PVD threshold 5 VPVD5 | VDD rising | min 2.8 · typ 2.91 · max 3.03 V | 48 |
| PVD threshold 5 VPVD5 | VDD falling | min 2.7 · typ 2.81 · max 2.93 V | 48 |
| PVD threshold 6 VPVD6 | VDD rising | min 2.9 · typ 3.01 · max 3.14 V | 48 |
| PVD threshold 6 VPVD6 | VDD falling | min 2.8 · typ 2.91 · max 3.04 V | 48 |
| Hysteresis of VPOR and VPDR Vhyst_POR_PDR | Hysteresis in continuous mode | typ 20 mV | 48 |
| Hysteresis of VPOR and VPDR Vhyst_POR_PDR | Hysteresis in other mode | typ 30 mV | 48 |
| Hysteresis of VBORx and VPVDx Vhyst_BOR_PVD | typ 100 mV | 48 | |
| BOR and PVD consumption IDD(BOR_PVD) | Guaranteed by design | typ 1.1 · max 1.6 uA | 48 |
| Internal reference voltage VREFINT | -40°C < TJ < 130°C | min 1.182 · typ 1.212 · max 1.232 V | 48 |
| ADC sampling time when reading the internal reference voltage tS_vrefint | Guaranteed by design | min 4 us | 48 |
| Start time of reference voltage buffer when ADC is enable tstart_vrefint | typ 8 · max 12 us | 48 | |
| VREFINT buffer consumption from VDD when converted by ADC IDD(VREFINTBUF) | typ 12.5 · max 20 uA | 49 | |
| Internal reference voltage spread over the temperature range ∆VREFINT | VDD = 3 V | typ 5 · max 7.5 mV | 49 |
| Temperature coefficient TCoeff_vrefint | typ 30 · max 50 ppm/°C | 49 | |
| Long term stability ACoeff | 1000 hours, T = 25 °C | typ 300 · max 1000 ppm | 49 |
| Voltage coefficient VDDCoeff | 3.0 V < VDD < 3.6 V | typ 250 · max 1200 ppm/V | 49 |
| 1/4 reference voltage VREFINT_DIV1 | min 24 · typ 25 · max 26 % VREFINT | 49 | |
| 1/2 reference voltage VREFINT_DIV2 | min 49 · typ 50 · max 51 % VREFINT | 49 | |
| 3/4 reference voltage VREFINT_DIV3 | min 74 · typ 75 · max 76 % VREFINT | 49 | |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 64 MHz; Flash memory; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 5.2 · max 6.7 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 64 MHz; Flash memory; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 5.4 · max 6.9 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 56 MHz; Flash memory; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 4.7 · max 5.9 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 56 MHz; Flash memory; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 4.8 · max 6 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 48 MHz; Flash memory; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 4.2 · max 4.8 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 48 MHz; Flash memory; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 4.3 · max 5 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 32 MHz; Flash memory; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 2.9 · max 3.8 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 32 MHz; Flash memory; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 3 · max 4.1 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 24 MHz; Flash memory; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 2.3 · max 2.9 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 24 MHz; Flash memory; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 2.4 · max 3.2 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 16 MHz HSE bypass; Flash memory; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 1.5 · max 2.1 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 16 MHz HSE bypass; Flash memory; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 1.5 · max 2.4 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 64 MHz; SRAM; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 4.3 · max 6 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 64 MHz; SRAM; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 4.4 · max 6.2 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 56 MHz; SRAM; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 3.8 · max 5.4 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 56 MHz; SRAM; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 3.9 · max 5.6 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 48 MHz; SRAM; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 3.4 · max 4.8 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 48 MHz; SRAM; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 3.5 · max 5 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 32 MHz; SRAM; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 2.4 · max 3.4 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 32 MHz; SRAM; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 2.5 · max 3.6 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 24 MHz; SRAM; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 1.9 · max 2.7 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 24 MHz; SRAM; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 1.9 · max 2.9 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 16 MHz HSE bypass; SRAM; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 1.2 · max 1.9 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 1; PLL enabled; 16 MHz HSE bypass; SRAM; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 1.2 · max 2 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; 16 MHz HSE bypass; Flash memory; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 1.2 · max 1.6 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; 16 MHz HSE bypass; Flash memory; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 1.2 · max 1.9 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; 8 MHz HSE bypass; Flash memory; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 0.7 · max 1.1 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; 8 MHz HSE bypass; Flash memory; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 0.7 · max 1.3 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; 2 MHz HSE bypass; Flash memory; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 0.2 · max 0.5 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; 2 MHz HSE bypass; Flash memory; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 0.3 · max 0.8 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; 16 MHz HSE bypass; SRAM; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 1 · max 1.5 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; 16 MHz HSE bypass; SRAM; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 1 · max 1.7 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; 8 MHz HSE bypass; SRAM; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 0.5 · max 1 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; 8 MHz HSE bypass; SRAM; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 0.6 · max 1.1 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; 2 MHz HSE bypass; SRAM; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 0.2 · max 0.5 mA | 50 |
| Supply current in Run mode IDD(Run) | Range 2; PLL enabled; 2 MHz HSE bypass; SRAM; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 0.3 · max 0.7 mA | 50 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; 2 MHz HSE bypass; Flash memory; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 165 · max 470 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; 2 MHz HSE bypass; Flash memory; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 205 · max 660 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; 1 MHz HSE bypass; Flash memory; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 90 · max 400 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; 1 MHz HSE bypass; Flash memory; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 120 · max 580 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; 500 kHz HSE bypass; Flash memory; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 53 · max 360 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; 500 kHz HSE bypass; Flash memory; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 81 · max 530 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; 125 kHz HSE bypass; Flash memory; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 23 · max 310 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; 125 kHz HSE bypass; Flash memory; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 51 · max 500 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; 32 kHz LSE bypass; Flash memory; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 16 · max 270 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; 32 kHz LSE bypass; Flash memory; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 43 · max 400 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; 2 MHz HSE bypass; SRAM; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 146 · max 460 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; 2 MHz HSE bypass; SRAM; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 174 · max 660 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; 1 MHz HSE bypass; SRAM; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 83 · max 390 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; 1 MHz HSE bypass; SRAM; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 104 · max 630 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; 500 kHz HSE bypass; SRAM; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 44 · max 340 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; 500 kHz HSE bypass; SRAM; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 74 · max 590 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; 125 kHz HSE bypass; SRAM; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 19 · max 300 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; 125 kHz HSE bypass; SRAM; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 46 · max 420 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; 32 kHz LSE bypass; SRAM; 25 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 14 · max 260 uA | 51 |
| Supply current in Low-power run mode IDD(LPRun) | PLL disabled; 32 kHz LSE bypass; SRAM; 85 °C; typ VDD = 3.0 V, max VDD = 3.6 V; peripherals disabled | typ 34 · max 340 uA | 51 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz PLLRCLK; Flash memory; Reduced code; VDD = 3.3 V; 25 °C | typ 5.4 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz PLLRCLK; Flash memory; Coremark; VDD = 3.3 V; 25 °C | typ 5.2 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz PLLRCLK; Flash memory; Dhrystone 2.1; VDD = 3.3 V; 25 °C | typ 5.3 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz PLLRCLK; Flash memory; Fibonacci; VDD = 3.3 V; 25 °C | typ 4.3 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz PLLRCLK; Flash memory; While(1) loop; VDD = 3.3 V; 25 °C | typ 62 uA/MHz | 52 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz PLLRCLK; SRAM; Reduced code; VDD = 3.3 V; 25 °C | typ 4.4 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz PLLRCLK; SRAM; Coremark; VDD = 3.3 V; 25 °C | typ 5.6 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz PLLRCLK; SRAM; Dhrystone 2.1; VDD = 3.3 V; 25 °C | typ 5.6 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz PLLRCLK; SRAM; Fibonacci; VDD = 3.3 V; 25 °C | typ 4.3 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 1; 64 MHz PLLRCLK; SRAM; While(1) loop; VDD = 3.3 V; 25 °C | typ 4 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz HSI16; PLL disabled; Flash memory; Reduced code; VDD = 3.3 V; 25 °C | typ 1.6 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz HSI16; PLL disabled; Flash memory; Coremark; VDD = 3.3 V; 25 °C | typ 1.5 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz HSI16; PLL disabled; Flash memory; Dhrystone 2.1; VDD = 3.3 V; 25 °C | typ 1.5 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz HSI16; PLL disabled; Flash memory; Fibonacci; VDD = 3.3 V; 25 °C | typ 1.1 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz HSI16; PLL disabled; Flash memory; While(1) loop; VDD = 3.3 V; 25 °C | typ 1 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz HSI16; PLL disabled; SRAM; Reduced code; VDD = 3.3 V; 25 °C | typ 1.3 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz HSI16; PLL disabled; SRAM; Coremark; VDD = 3.3 V; 25 °C | typ 1.4 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz HSI16; PLL disabled; SRAM; Dhrystone 2.1; VDD = 3.3 V; 25 °C | typ 1.4 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz HSI16; PLL disabled; SRAM; Fibonacci; VDD = 3.3 V; 25 °C | typ 1 mA | 52 |
| Supply current in Run mode IDD(Run) | Range 2; 16 MHz HSI16; PLL disabled; SRAM; While(1) loop; VDD = 3.3 V; 25 °C | typ 1 mA | 52 |
| Supply current in Low-power run mode IDD(LPRun) | 2 MHz HSI16/8; PLL disabled; Flash memory; Reduced code; VDD = 3.3 V; 25 °C | typ 345 uA | 52 |
| Supply current in Low-power run mode IDD(LPRun) | 2 MHz HSI16/8; PLL disabled; Flash memory; Coremark; VDD = 3.3 V; 25 °C | typ 400 uA | 52 |
| Supply current in Low-power run mode IDD(LPRun) | 2 MHz HSI16/8; PLL disabled; Flash memory; Dhrystone 2.1; VDD = 3.3 V; 25 °C | typ 400 uA | 52 |
| Supply current in Low-power run mode IDD(LPRun) | 2 MHz HSI16/8; PLL disabled; Flash memory; Fibonacci; VDD = 3.3 V; 25 °C | typ 365 uA | 52 |
| Supply current in Low-power run mode IDD(LPRun) | 2 MHz HSI16/8; PLL disabled; Flash memory; While(1) loop; VDD = 3.3 V; 25 °C | typ 415 uA | 52 |
| Supply current in Low-power run mode IDD(LPRun) | 2 MHz HSI16/8; PLL disabled; SRAM; Reduced code; VDD = 3.3 V; 25 °C | typ 225 uA | 52 |
| Supply current in Low-power run mode IDD(LPRun) | 2 MHz HSI16/8; PLL disabled; SRAM; Coremark; VDD = 3.3 V; 25 °C | typ 515 uA | 52 |
| Supply current in Low-power run mode IDD(LPRun) | 2 MHz HSI16/8; PLL disabled; SRAM; Dhrystone 2.1; VDD = 3.3 V; 25 °C | typ 515 uA | 52 |
| Supply current in Low-power run mode IDD(LPRun) | 2 MHz HSI16/8; PLL disabled; SRAM; Fibonacci; VDD = 3.3 V; 25 °C | typ 295 uA | 52 |
| Supply current in Low-power run mode IDD(LPRun) | 2 MHz HSI16/8; PLL disabled; SRAM; While(1) loop; VDD = 3.3 V; 25 °C | typ 290 uA | 52 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; Flash enabled; PLLRCLK, PLL enabled; 64 MHz; peripherals disabled; 25 °C | typ 1.3 · max 1.8 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; Flash enabled; PLLRCLK, PLL enabled; 64 MHz; peripherals disabled; 85 °C | typ 1.4 · max 2 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; Flash enabled; PLLRCLK, PLL enabled; 56 MHz; peripherals disabled; 25 °C | typ 1.2 · max 1.6 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; Flash enabled; PLLRCLK, PLL enabled; 56 MHz; peripherals disabled; 85 °C | typ 1.3 · max 1.8 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; Flash enabled; PLLRCLK, PLL enabled; 48 MHz; peripherals disabled; 25 °C | typ 1.1 · max 1.5 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; Flash enabled; PLLRCLK, PLL enabled; 48 MHz; peripherals disabled; 85 °C | typ 1.1 · max 1.6 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; Flash enabled; PLLRCLK, PLL enabled; 32 MHz; peripherals disabled; 25 °C | typ 0.8 · max 1.2 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; Flash enabled; PLLRCLK, PLL enabled; 32 MHz; peripherals disabled; 85 °C | typ 0.8 · max 1.2 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; Flash enabled; PLLRCLK, PLL enabled; 24 MHz; peripherals disabled; 25 °C | typ 0.7 · max 0.9 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; Flash enabled; PLLRCLK, PLL enabled; 24 MHz; peripherals disabled; 85 °C | typ 0.7 · max 1 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; Flash enabled; HSE bypass, PLL disabled; 16 MHz; peripherals disabled; 25 °C | typ 0.4 · max 0.6 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 1; Flash enabled; HSE bypass, PLL disabled; 16 MHz; peripherals disabled; 85 °C | typ 0.4 · max 0.7 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 2; Flash enabled; HSE bypass, PLL disabled; 16 MHz; peripherals disabled; 25 °C | typ 0.3 · max 0.5 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 2; Flash enabled; HSE bypass, PLL disabled; 16 MHz; peripherals disabled; 85 °C | typ 0.4 · max 0.6 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 2; Flash enabled; HSE bypass, PLL disabled; 8 MHz; peripherals disabled; 25 °C | typ 0.2 · max 0.3 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 2; Flash enabled; HSE bypass, PLL disabled; 8 MHz; peripherals disabled; 85 °C | typ 0.3 · max 0.5 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 2; Flash enabled; HSE bypass, PLL disabled; 2 MHz; peripherals disabled; 25 °C | typ 0.1 · max 0.2 mA | 53 |
| Supply current in Sleep mode IDD(Sleep) | Range 2; Flash enabled; HSE bypass, PLL disabled; 2 MHz; peripherals disabled; 85 °C | typ 0.2 · max 0.4 mA | 53 |
| Supply current in Low-power sleep mode IDD(LPSleep) | Flash disabled; PLL disabled; HSE bypass; 2 MHz; peripherals disabled; 25 °C | typ 40 · max 145 uA | 53 |
| Supply current in Low-power sleep mode IDD(LPSleep) | Flash disabled; PLL disabled; HSE bypass; 2 MHz; peripherals disabled; 85 °C | typ 70 · max 340 uA | 53 |
| Supply current in Low-power sleep mode IDD(LPSleep) | Flash disabled; PLL disabled; HSE bypass; 1 MHz; peripherals disabled; 25 °C | typ 27 · max 125 uA | 53 |
| Supply current in Low-power sleep mode IDD(LPSleep) | Flash disabled; PLL disabled; HSE bypass; 1 MHz; peripherals disabled; 85 °C | typ 55 · max 315 uA | 53 |
| Supply current in Low-power sleep mode IDD(LPSleep) | Flash disabled; PLL disabled; HSE bypass; 500 kHz; peripherals disabled; 25 °C | typ 21 · max 120 uA | 53 |
| Supply current in Low-power sleep mode IDD(LPSleep) | Flash disabled; PLL disabled; HSE bypass; 500 kHz; peripherals disabled; 85 °C | typ 47 · max 240 uA | 53 |
| Supply current in Low-power sleep mode IDD(LPSleep) | Flash disabled; PLL disabled; HSE bypass; 125 kHz; peripherals disabled; 25 °C | typ 15 · max 110 uA | 53 |
| Supply current in Low-power sleep mode IDD(LPSleep) | Flash disabled; PLL disabled; HSE bypass; 125 kHz; peripherals disabled; 85 °C | typ 42 · max 225 uA | 53 |
| Supply current in Low-power sleep mode IDD(LPSleep) | Flash disabled; PLL disabled; LSE bypass; 32 kHz; peripherals disabled; 25 °C | typ 12 · max 105 uA | 53 |
| Supply current in Low-power sleep mode IDD(LPSleep) | Flash disabled; PLL disabled; LSE bypass; 32 kHz; peripherals disabled; 85 °C | typ 40 · max 215 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel enabled; VDD = 1.8 V; 25 °C | typ 265 · max 330 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel enabled; VDD = 1.8 V; 85 °C | typ 290 · max 420 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel enabled; VDD = 2.4 V; 25 °C | typ 265 · max 330 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel enabled; VDD = 2.4 V; 85 °C | typ 290 · max 450 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel enabled; VDD = 3 V; 25 °C | typ 270 · max 345 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel enabled; VDD = 3 V; 85 °C | typ 295 · max 485 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel enabled; VDD = 3.6 V; 25 °C | typ 270 · max 370 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel enabled; VDD = 3.6 V; 85 °C | typ 295 · max 495 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel disabled; VDD = 1.8 V; 25 °C | typ 92 · max 120 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel disabled; VDD = 1.8 V; 85 °C | typ 130 · max 180 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel disabled; VDD = 2.4 V; 25 °C | typ 95 · max 120 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel disabled; VDD = 2.4 V; 85 °C | typ 130 · max 220 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel disabled; VDD = 3 V; 25 °C | typ 97 · max 125 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel disabled; VDD = 3 V; 85 °C | typ 135 · max 235 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel disabled; VDD = 3.6 V; 25 °C | typ 99 · max 125 uA | 53 |
| Supply current in Stop 0 mode IDD(Stop 0) | HSI kernel disabled; VDD = 3.6 V; 85 °C | typ 135 · max 245 uA | 53 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC disabled; VDD = 1.8 V; 25 °C | typ 2.9 · max 9 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC disabled; VDD = 1.8 V; 85 °C | typ 25 · max 95 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC disabled; VDD = 2.4 V; 25 °C | typ 3.1 · max 11 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC disabled; VDD = 2.4 V; 85 °C | typ 26 · max 110 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC disabled; VDD = 3 V; 25 °C | typ 3.3 · max 16 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC disabled; VDD = 3 V; 85 °C | typ 26 · max 120 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC disabled; VDD = 3.6 V; 25 °C | typ 3.6 · max 20 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC disabled; VDD = 3.6 V; 85 °C | typ 26 · max 130 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC enabled, clocked by LSI; VDD = 1.8 V; 25 °C | typ 3.3 · max 11 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC enabled, clocked by LSI; VDD = 1.8 V; 85 °C | typ 25 · max 95 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC enabled, clocked by LSI; VDD = 2.4 V; 25 °C | typ 3.6 · max 14 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC enabled, clocked by LSI; VDD = 2.4 V; 85 °C | typ 26 · max 110 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC enabled, clocked by LSI; VDD = 3 V; 25 °C | typ 3.7 · max 18 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC enabled, clocked by LSI; VDD = 3 V; 85 °C | typ 26 · max 120 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC enabled, clocked by LSI; VDD = 3.6 V; 25 °C | typ 4.2 · max 23 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash not powered; RTC enabled, clocked by LSI; VDD = 3.6 V; 85 °C | typ 27 · max 130 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash powered; RTC disabled; VDD = 1.8 V; 25 °C | typ 7 · max 17 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash powered; RTC disabled; VDD = 1.8 V; 85 °C | typ 30 · max 130 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash powered; RTC disabled; VDD = 2.4 V; 25 °C | typ 7.3 · max 18 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash powered; RTC disabled; VDD = 2.4 V; 85 °C | typ 30 · max 135 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash powered; RTC disabled; VDD = 3 V; 25 °C | typ 7.5 · max 19 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash powered; RTC disabled; VDD = 3 V; 85 °C | typ 30 · max 140 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash powered; RTC disabled; VDD = 3.6 V; 25 °C | typ 7.8 · max 23 uA | 54 |
| Supply current in Stop 1 mode IDD(Stop 1) | Flash powered; RTC disabled; VDD = 3.6 V; 85 °C | typ 31 · max 140 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; no SRAM retention; ULPEN set; VDD = 1.8 V; 25 °C | typ 0.1 · max 0.7 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; no SRAM retention; ULPEN set; VDD = 1.8 V; 85 °C | typ 1.5 · max 9 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; no SRAM retention; ULPEN set; VDD = 2.4 V; 25 °C | typ 0.1 · max 0.7 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; no SRAM retention; ULPEN set; VDD = 2.4 V; 85 °C | typ 1.8 · max 11 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; no SRAM retention; ULPEN set; VDD = 3.0 V; 25 °C | typ 0.2 · max 0.9 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; no SRAM retention; ULPEN set; VDD = 3.0 V; 85 °C | typ 2.1 · max 14 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; no SRAM retention; ULPEN set; VDD = 3.6 V; 25 °C | typ 0.4 · max 1 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC disabled; no SRAM retention; ULPEN set; VDD = 3.6 V; 85 °C | typ 2.5 · max 16 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, clocked by LSI; no SRAM retention; ULPEN set; VDD = 1.8 V; 25 °C | typ 0.3 · max 0.8 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, clocked by LSI; no SRAM retention; ULPEN set; VDD = 1.8 V; 85 °C | typ 1.7 · max 14 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, clocked by LSI; no SRAM retention; ULPEN set; VDD = 2.4 V; 25 °C | typ 0.4 · max 1 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, clocked by LSI; no SRAM retention; ULPEN set; VDD = 2.4 V; 85 °C | typ 2.1 · max 14 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, clocked by LSI; no SRAM retention; ULPEN set; VDD = 3.0 V; 25 °C | typ 0.6 · max 1.2 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, clocked by LSI; no SRAM retention; ULPEN set; VDD = 3.0 V; 85 °C | typ 2.5 · max 16 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, clocked by LSI; no SRAM retention; ULPEN set; VDD = 3.6 V; 25 °C | typ 0.8 · max 1.6 uA | 54 |
| Supply current in Standby mode IDD(Standby) | RTC enabled, clocked by LSI; no SRAM retention; ULPEN set; VDD = 3.6 V; 85 °C | typ 3 · max 16 uA | 54 |
| Supply current in Standby mode IDD(Standby) | IWDG enabled, clocked by LSI; no SRAM retention; ULPEN set; VDD = 1.8 V; 25 °C | typ 0.2 · max 0.8 uA | 54 |
| Supply current in Standby mode IDD(Standby) | IWDG enabled, clocked by LSI; no SRAM retention; ULPEN set; VDD = 1.8 V; 85 °C | typ 1.6 · max 10 uA | 54 |
| Supply current in Standby mode IDD(Standby) | IWDG enabled, clocked by LSI; no SRAM retention; ULPEN set; VDD = 2.4 V; 25 °C | typ 0.3 · max 0.8 uA | 54 |
| Supply current in Standby mode IDD(Standby) | IWDG enabled, clocked by LSI; no SRAM retention; ULPEN set; VDD = 2.4 V; 85 °C | typ 2 · max 12 uA | 54 |
| Supply current in Standby mode IDD(Standby) | IWDG enabled, clocked by LSI; no SRAM retention; ULPEN set; VDD = 3.0 V; 25 °C | typ 0.4 · max 1.1 uA | 54 |
| Supply current in Standby mode IDD(Standby) | IWDG enabled, clocked by LSI; no SRAM retention; ULPEN set; VDD = 3.0 V; 85 °C | typ 2.4 · max 14 uA | 54 |
| Supply current in Standby mode IDD(Standby) | IWDG enabled, clocked by LSI; no SRAM retention; ULPEN set; VDD = 3.6 V; 25 °C | typ 0.7 · max 1.7 uA | 54 |
| Supply current in Standby mode IDD(Standby) | IWDG enabled, clocked by LSI; no SRAM retention; ULPEN set; VDD = 3.6 V; 85 °C | typ 2.8 · max 17 uA | 54 |
| Supply current in Standby mode IDD(Standby) | ULPEN = 0; no SRAM retention; VDD = 1.8 V; 25 °C | typ 0.7 · max 1 uA | 54 |
| Supply current in Standby mode IDD(Standby) | ULPEN = 0; no SRAM retention; VDD = 1.8 V; 85 °C | typ 1.4 · max 9 uA | 54 |
| Supply current in Standby mode IDD(Standby) | ULPEN = 0; no SRAM retention; VDD = 2.4 V; 25 °C | typ 0.9 · max 1 uA | 54 |
| Supply current in Standby mode IDD(Standby) | ULPEN = 0; no SRAM retention; VDD = 2.4 V; 85 °C | typ 1.7 · max 10 uA | 54 |
| Supply current in Standby mode IDD(Standby) | ULPEN = 0; no SRAM retention; VDD = 3.0 V; 25 °C | typ 1.1 · max 1.4 uA | 54 |
| Supply current in Standby mode IDD(Standby) | ULPEN = 0; no SRAM retention; VDD = 3.0 V; 85 °C | typ 2 · max 10 uA | 54 |
| Supply current in Standby mode IDD(Standby) | ULPEN = 0; no SRAM retention; VDD = 3.6 V; 25 °C | typ 1.3 · max 1.5 uA | 54 |
| Supply current in Standby mode IDD(Standby) | ULPEN = 0; no SRAM retention; VDD = 3.6 V; 85 °C | typ 2.4 · max 12 uA | 54 |
| Extra supply current to retain SRAM content ∆IDD(SRAM) | SRAM retention enabled; add to IDD(Standby); VDD = 1.8 V; 25 °C | typ 0.3 · max 0.4 uA | 55 |
| Extra supply current to retain SRAM content ∆IDD(SRAM) | SRAM retention enabled; add to IDD(Standby); VDD = 1.8 V; 85 °C | typ 0.8 · max 7 uA | 55 |
| Extra supply current to retain SRAM content ∆IDD(SRAM) | SRAM retention enabled; add to IDD(Standby); VDD = 2.4 V; 25 °C | typ 0.4 · max 0.9 uA | 55 |
| Extra supply current to retain SRAM content ∆IDD(SRAM) | SRAM retention enabled; add to IDD(Standby); VDD = 2.4 V; 85 °C | typ 0.9 · max 8 uA | 55 |
| Extra supply current to retain SRAM content ∆IDD(SRAM) | SRAM retention enabled; add to IDD(Standby); VDD = 3.0 V; 25 °C | typ 0.5 · max 1.3 uA | 55 |
| Extra supply current to retain SRAM content ∆IDD(SRAM) | SRAM retention enabled; add to IDD(Standby); VDD = 3.0 V; 85 °C | typ 1 · max 8 uA | 55 |
| Extra supply current to retain SRAM content ∆IDD(SRAM) | SRAM retention enabled; add to IDD(Standby); VDD = 3.6 V; 25 °C | typ 0.6 · max 1.3 uA | 55 |
| Extra supply current to retain SRAM content ∆IDD(SRAM) | SRAM retention enabled; add to IDD(Standby); VDD = 3.6 V; 85 °C | typ 1.1 · max 9 uA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC disabled; VDD = 1.8 V; 25 °C | typ 12 · max 250 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC disabled; VDD = 1.8 V; 85 °C | typ 370 · max 2700 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC disabled; VDD = 2.4 V; 25 °C | typ 18 · max 450 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC disabled; VDD = 2.4 V; 85 °C | typ 430 · max 3000 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC disabled; VDD = 3.0 V; 25 °C | typ 25 · max 800 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC disabled; VDD = 3.0 V; 85 °C | typ 500 · max 3700 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC disabled; VDD = 3.6 V; 25 °C | typ 42 · max 900 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC disabled; VDD = 3.6 V; 85 °C | typ 620 · max 4500 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC enabled, LSE bypass at 32.768 kHz; VDD = 1.8 V; 25 °C | typ 185 · max 850 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC enabled, LSE bypass at 32.768 kHz; VDD = 1.8 V; 85 °C | typ 550 · max 2700 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC enabled, LSE bypass at 32.768 kHz; VDD = 2.4 V; 25 °C | typ 265 · max 1450 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC enabled, LSE bypass at 32.768 kHz; VDD = 2.4 V; 85 °C | typ 675 · max 3000 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC enabled, LSE bypass at 32.768 kHz; VDD = 3.0 V; 25 °C | typ 350 · max 2350 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC enabled, LSE bypass at 32.768 kHz; VDD = 3.0 V; 85 °C | typ 835 · max 3700 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC enabled, LSE bypass at 32.768 kHz; VDD = 3.6 V; 25 °C | typ 460 · max 3100 nA | 55 |
| Supply current in Shutdown mode IDD(Shutdown) | RTC enabled, LSE bypass at 32.768 kHz; VDD = 3.6 V; 85 °C | typ 1050 · max 4400 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE bypass at 32.768 kHz; voltage column VDD = 1.8 V; 25 °C | typ 180 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE bypass at 32.768 kHz; voltage column VDD = 1.8 V; 85 °C | typ 240 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE bypass at 32.768 kHz; voltage column VDD = 2.4 V; 25 °C | typ 250 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE bypass at 32.768 kHz; voltage column VDD = 2.4 V; 85 °C | typ 330 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE bypass at 32.768 kHz; voltage column VDD = 3.0 V; 25 °C | typ 330 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE bypass at 32.768 kHz; voltage column VDD = 3.0 V; 85 °C | typ 420 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE bypass at 32.768 kHz; voltage column VDD = 3.6 V; 25 °C | typ 430 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE bypass at 32.768 kHz; voltage column VDD = 3.6 V; 85 °C | typ 550 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE crystal at 32.768 kHz; voltage column VDD = 1.8 V; 25 °C | typ 300 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE crystal at 32.768 kHz; voltage column VDD = 1.8 V; 85 °C | typ 360 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE crystal at 32.768 kHz; voltage column VDD = 2.4 V; 25 °C | typ 380 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE crystal at 32.768 kHz; voltage column VDD = 2.4 V; 85 °C | typ 420 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE crystal at 32.768 kHz; voltage column VDD = 3.0 V; 25 °C | typ 460 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE crystal at 32.768 kHz; voltage column VDD = 3.0 V; 85 °C | typ 480 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE crystal at 32.768 kHz; voltage column VDD = 3.6 V; 25 °C | typ 580 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC enabled, LSE crystal at 32.768 kHz; voltage column VDD = 3.6 V; 85 °C | typ 700 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC disabled; voltage column VDD = 1.8 V; 25 °C | typ 1 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC disabled; voltage column VDD = 1.8 V; 85 °C | typ 59 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC disabled; voltage column VDD = 2.4 V; 25 °C | typ 1 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC disabled; voltage column VDD = 2.4 V; 85 °C | typ 68 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC disabled; voltage column VDD = 3.0 V; 25 °C | typ 2 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC disabled; voltage column VDD = 3.0 V; 85 °C | typ 78 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC disabled; voltage column VDD = 3.6 V; 25 °C | typ 5 nA | 55 |
| Supply current in VBAT mode IDD(VBAT) | RTC disabled; voltage column VDD = 3.6 V; 85 °C | typ 97 nA | 55 |
| IOPORT Bus | IOPORT; Range 1 | typ 0.5 uA/MHz | 57 |
| IOPORT Bus | IOPORT; Range 2 | typ 0.4 uA/MHz | 57 |
| IOPORT Bus | IOPORT; Low-power run and sleep | typ 0.3 uA/MHz | 57 |
| GPIOA | IOPORT; Range 1 | typ 3.1 uA/MHz | 57 |
| GPIOA | IOPORT; Range 2 | typ 2.4 uA/MHz | 57 |
| GPIOA | IOPORT; Low-power run and sleep | typ 3 uA/MHz | 57 |
| GPIOB | IOPORT; Range 1 | typ 2.9 uA/MHz | 57 |
| GPIOB | IOPORT; Range 2 | typ 2.3 uA/MHz | 57 |
| GPIOB | IOPORT; Low-power run and sleep | typ 3 uA/MHz | 57 |
| GPIOC | IOPORT; Range 1 | typ 0.9 uA/MHz | 57 |
| GPIOC | IOPORT; Range 2 | typ 0.8 uA/MHz | 57 |
| GPIOC | IOPORT; Low-power run and sleep | typ 1 uA/MHz | 57 |
| GPIOD | IOPORT; Range 1 | typ 0.7 uA/MHz | 57 |
| GPIOD | IOPORT; Range 2 | typ 0.6 uA/MHz | 57 |
| GPIOD | IOPORT; Low-power run and sleep | typ 1 uA/MHz | 57 |
| GPIOF | IOPORT; Range 1 | typ 0.5 uA/MHz | 57 |
| GPIOF | IOPORT; Range 2 | typ 0.5 uA/MHz | 57 |
| GPIOF | IOPORT; Low-power run and sleep | typ 1 uA/MHz | 57 |
| Bus matrix | AHB; Range 1 | typ 3.2 uA/MHz | 57 |
| Bus matrix | AHB; Range 2 | typ 2.2 uA/MHz | 57 |
| Bus matrix | AHB; Low-power run and sleep | typ 2.8 uA/MHz | 57 |
| All AHB Peripherals | AHB; Range 1 | typ 9.8 uA/MHz | 57 |
| All AHB Peripherals | AHB; Range 2 | typ 8.2 uA/MHz | 57 |
| All AHB Peripherals | AHB; Low-power run and sleep | typ 8.5 uA/MHz | 57 |
| DMA1/DMAMUX | AHB; Range 1 | typ 3.4 uA/MHz | 57 |
| DMA1/DMAMUX | AHB; Range 2 | typ 2.9 uA/MHz | 57 |
| DMA1/DMAMUX | AHB; Low-power run and sleep | typ 3 uA/MHz | 57 |
| CRC | AHB; Range 1 | typ 0.5 uA/MHz | 57 |
| CRC | AHB; Range 2 | typ 0.4 uA/MHz | 57 |
| CRC | AHB; Low-power run and sleep | typ 0.5 uA/MHz | 57 |
| FLASH | AHB; Range 1 | typ 4.3 uA/MHz | 57 |
| FLASH | AHB; Range 2 | typ 3.6 uA/MHz | 57 |
| FLASH | AHB; Low-power run and sleep | typ 3.5 uA/MHz | 57 |
| All APB peripherals | APB; Range 1 | typ 23.5 uA/MHz | 57 |
| All APB peripherals | APB; Range 2 | typ 20 uA/MHz | 57 |
| All APB peripherals | APB; Low-power run and sleep | typ 20.5 uA/MHz | 57 |
| AHB to APB bridge | APB; Range 1 | typ 0.2 uA/MHz | 57 |
| AHB to APB bridge | APB; Range 2 | typ 0.2 uA/MHz | 57 |
| AHB to APB bridge | APB; Low-power run and sleep | typ 0.1 uA/MHz | 57 |
| PWR | APB; Range 1 | typ 0.4 uA/MHz | 57 |
| PWR | APB; Range 2 | typ 0.3 uA/MHz | 57 |
| PWR | APB; Low-power run and sleep | typ 0.5 uA/MHz | 57 |
| SYSCFG/VREFBUF | APB; Range 1 | typ 0.4 uA/MHz | 57 |
| SYSCFG/VREFBUF | APB; Range 2 | typ 0.4 uA/MHz | 57 |
| SYSCFG/VREFBUF | APB; Low-power run and sleep | typ 0.5 uA/MHz | 57 |
| WWDG | APB; Range 1 | typ 0.2 uA/MHz | 57 |
| WWDG | APB; Range 2 | typ 0.3 uA/MHz | 57 |
| WWDG | APB; Low-power run and sleep | typ 0.5 uA/MHz | 57 |
| TIM1 | APB; Range 1 | typ 7 uA/MHz | 57 |
| TIM1 | APB; Range 2 | typ 5.9 uA/MHz | 57 |
| TIM1 | APB; Low-power run and sleep | typ 6.5 uA/MHz | 57 |
| TIM2 | APB; Range 1 | typ 4.7 uA/MHz | 57 |
| TIM2 | APB; Range 2 | typ 3.8 uA/MHz | 57 |
| TIM2 | APB; Low-power run and sleep | typ 3.5 uA/MHz | 57 |
| TIM3 | APB; Range 1 | typ 3.6 uA/MHz | 57 |
| TIM3 | APB; Range 2 | typ 3.1 uA/MHz | 57 |
| TIM3 | APB; Low-power run and sleep | typ 3.5 uA/MHz | 57 |
| TIM14 | APB; Range 1 | typ 1.5 uA/MHz | 57 |
| TIM14 | APB; Range 2 | typ 1.3 uA/MHz | 57 |
| TIM14 | APB; Low-power run and sleep | typ 1.5 uA/MHz | 57 |
| TIM16 | APB; Range 1 | typ 2.3 uA/MHz | 57 |
| TIM16 | APB; Range 2 | typ 2 uA/MHz | 57 |
| TIM16 | APB; Low-power run and sleep | typ 2.5 uA/MHz | 57 |
| TIM17 | APB; Range 1 | typ 1 uA/MHz | 57 |
| TIM17 | APB; Range 2 | typ 0.8 uA/MHz | 57 |
| TIM17 | APB; Low-power run and sleep | typ 0.3 uA/MHz | 57 |
| LPTIM1 | APB; Range 1 | typ 3.1 uA/MHz | 57 |
| LPTIM1 | APB; Range 2 | typ 2.7 uA/MHz | 57 |
| LPTIM1 | APB; Low-power run and sleep | typ 3 uA/MHz | 57 |
| LPTIM2 | APB; Range 1 | typ 2.7 uA/MHz | 57 |
| LPTIM2 | APB; Range 2 | typ 2.3 uA/MHz | 57 |
| LPTIM2 | APB; Low-power run and sleep | typ 2.5 uA/MHz | 57 |
| Wakeup time from Stop 1 tWUSTOP1 | Run-mode execution in Flash memory not powered in Stop 1; HCLK = HSI16 = 16 MHz; regulator in Range 1 or Range 2 | typ 9 · max 11.2 us | 59 |
| Wakeup time from Stop 1 tWUSTOP1 | Run-mode execution in SRAM or Flash memory powered in Stop 1; HCLK = HSI16 = 16 MHz; regulator in Range 1 or Range 2 | typ 5 · max 7.5 us | 59 |
| Wakeup time from Stop 1 tWUSTOP1 | Low-power-run-mode execution in Flash memory not powered in Stop 1; HCLK = HSI16/8 = 2 MHz; regulator in low-power mode | typ 22 · max 25.3 us | 59 |
| Wakeup time from Stop 1 tWUSTOP1 | Low-power-run-mode execution in SRAM or Flash memory powered in Stop 1; HCLK = HSI16/8 = 2 MHz; regulator in low-power mode | typ 18 · max 23.5 us | 59 |
| Wakeup time from Standby mode tWUSTBY | Transiting to Run mode; HCLK = HSI16 = 16 MHz; regulator in Range 1 | typ 14.5 · max 30 us | 59 |
| Wakeup time from Shutdown mode tWUSHDN | Transiting to Run mode; HCLK = HSI16 = 16 MHz; regulator in Range 1 | typ 258 · max 340 us | 59 |
| Wakeup time from Low-power run mode tWULPRUN | Transiting to Run mode; HSISYS = HSI16/8 = 2 MHz; time until REGLPF flag is cleared | typ 5 · max 7 us | 59 |
| Transition times between regulator Range 1 and Range 2 tVOST | HSISYS = HSI16; time until VOSF flag is cleared | typ 20 · max 40 us | 59 |
| Wakeup time needed to calculate the maximum LPUART baud rate allowing to wakeup up from Stop mode when LPUART clock source is HSI16 tWULPUART | Stop mode 0 | max 1.7 us | 59 |
| Wakeup time needed to calculate the maximum LPUART baud rate allowing to wakeup up from Stop mode when LPUART clock source is HSI16 tWULPUART | Stop mode 1 | max 8.5 us | 59 |
| OSC32_IN high or low time tw(LSEH), tw(LSEL) | min 250 ns | 61 | |
| Oscillator frequency fOSC_IN | min 4 · typ 8 · max 48 MHz | 61 | |
| Feedback resistor RF | typ 200 kΩ | 61 | |
| HSE current consumption IDD(HSE) | During startup; first 2/3 of tSU(HSE) | max 5.5 mA | 62 |
| HSE current consumption IDD(HSE) | VDD = 3 V; Rm = 30 Ω; CL = 10 pF@8 MHz | typ 0.58 mA | 62 |
| HSE current consumption IDD(HSE) | VDD = 3 V; Rm = 45 Ω; CL = 10 pF@8 MHz | typ 0.59 mA | 62 |
| HSE current consumption IDD(HSE) | VDD = 3 V; Rm = 30 Ω; CL = 5 pF@48 MHz | typ 0.89 mA | 62 |
| HSE current consumption IDD(HSE) | VDD = 3 V; Rm = 30 Ω; CL = 10 pF@48 MHz | typ 1.14 mA | 62 |
| HSE current consumption IDD(HSE) | VDD = 3 V; Rm = 30 Ω; CL = 20 pF@48 MHz | typ 1.94 mA | 62 |
| Maximum critical crystal transconductance Gm | Startup | max 1.5 mA/V | 62 |
| Startup time tSU(HSE) | VDD is stabilized | typ 2 ms | 62 |
| LSE current consumption IDD(LSE) | LSEDRV[1:0] = 00; Low drive capability | typ 250 nA | 63 |
| LSE current consumption IDD(LSE) | LSEDRV[1:0] = 01; Medium low drive capability | typ 315 nA | 63 |
| LSE current consumption IDD(LSE) | LSEDRV[1:0] = 10; Medium high drive capability | typ 500 nA | 63 |
| LSE current consumption IDD(LSE) | LSEDRV[1:0] = 11; High drive capability | typ 630 nA | 63 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 00; Low drive capability | max 0.5 uA/V | 63 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 01; Medium low drive capability | max 0.75 uA/V | 63 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 10; Medium high drive capability | max 1.7 uA/V | 63 |
| Maximum critical crystal gm Gmcritmax | LSEDRV[1:0] = 11; High drive capability | max 2.7 uA/V | 63 |
| Startup time tSU(LSE) | VDD is stabilized | typ 2 s | 63 |
| HSI16 Frequency fHSI16 | VDD=3.0 V, TA=30 °C | min 15.88 · max 16.08 MHz | 64 |
| HSI16 oscillator frequency drift over temperature ∆Temp(HSI16) | TA= 0 to 85 °C | min -1 · max 1 % | 64 |
| HSI16 oscillator frequency drift over temperature ∆Temp(HSI16) | TA= -40 to 125 °C | min -2 · max 1.5 % | 64 |
| HSI16 oscillator frequency drift over VDD ∆VDD(HSI16) | VDD=1.62 V to 3.6 V | min -0.1 · max 0.05 % | 64 |
| HSI16 frequency user trimming step TRIM | From code 127 to 128 | min -8 · typ -6 · max -4 % | 64 |
| HSI16 frequency user trimming step TRIM | From code 63 to 64; From code 191 to 192 | min -5.8 · typ -3.8 · max -1.8 % | 64 |
| HSI16 frequency user trimming step TRIM | For all other code increments | min 0.2 · typ 0.3 · max 0.4 % | 64 |
| Duty Cycle DHSI16 | min 45 · max 55 % | 64 | |
| HSI16 oscillator start-up time tsu(HSI16) | typ 0.8 · max 1.2 us | 64 | |
| Electrostatic discharge voltage (human body model) VESD(HBM) | TA = +25 °C, conforming to ANSI/ESDA/JEDEC JS-001; Class 2 | max 2000 V | 69 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | TA = +25 °C, conforming to ANSI/ESDA/JEDEC JS-002; Class C2a | max 500 V | 69 |
| Output low level voltage for an I/O pin VOL | CMOS port; |IIO| 6 mA; VDDIO1 ≥ 2.7 V | max 0.4 V | 74 |
| Output low level voltage for an I/O pin VOL | TTL port; |IIO| = 6 mA; VDDIO1 ≥ 2.7 V | max 0.4 V | 74 |
| Output high level voltage for an I/O pin VOH | TTL port; |IIO| = 6 mA; VDDIO1 ≥ 2.7 V | min 2.4 V | 74 |
| Output low level voltage for an I/O pin VOL | All I/Os; |IIO| = 15 mA; VDDIO1 ≥ 2.7 V | max 1.3 V | 74 |
| Output low level voltage for an I/O pin VOL | |IIO| = 3 mA; VDDIO1 ≥ 1.62 V | max 0.4 V | 74 |
| Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with _f option) VOLFM+ | |IIO| = 20 mA; VDDIO1 ≥ 2.7 V | max 0.4 V | 74 |
| Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with _f option) VOLFM+ | |IIO| = 9 mA; VDDIO1 ≥ 1.62 V | max 0.4 V | 74 |
| Maximum frequency Fmax | Speed 00; C=50 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 2 MHz | 74 |
| Maximum frequency Fmax | Speed 00; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 0.35 MHz | 74 |
| Maximum frequency Fmax | Speed 00; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 3 MHz | 74 |
| Maximum frequency Fmax | Speed 00; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 0.45 MHz | 74 |
| Output rise and fall time Tr/Tf | Speed 00; C=50 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 100 ns | 74 |
| Output rise and fall time Tr/Tf | Speed 00; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 225 ns | 74 |
| Output rise and fall time Tr/Tf | Speed 00; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 75 ns | 74 |
| Output rise and fall time Tr/Tf | Speed 00; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 150 ns | 74 |
| Maximum frequency Fmax | Speed 01; C=50 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 10 MHz | 75 |
| Maximum frequency Fmax | Speed 01; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 2 MHz | 75 |
| Maximum frequency Fmax | Speed 01; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 15 MHz | 75 |
| Maximum frequency Fmax | Speed 01; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 2.5 MHz | 75 |
| Output rise and fall time Tr/Tf | Speed 01; C=50 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 30 ns | 75 |
| Output rise and fall time Tr/Tf | Speed 01; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 60 ns | 75 |
| Output rise and fall time Tr/Tf | Speed 01; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 15 ns | 75 |
| Output rise and fall time Tr/Tf | Speed 01; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 30 ns | 75 |
| Maximum frequency Fmax | Speed 10; C=50 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 30 MHz | 75 |
| Maximum frequency Fmax | Speed 10; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 15 MHz | 75 |
| Maximum frequency Fmax | Speed 10; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 60 MHz | 75 |
| Maximum frequency Fmax | Speed 10; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 30 MHz | 75 |
| Output rise and fall time Tr/Tf | Speed 10; C=50 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 11 ns | 75 |
| Output rise and fall time Tr/Tf | Speed 10; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 22 ns | 75 |
| Output rise and fall time Tr/Tf | Speed 10; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 4 ns | 75 |
| Output rise and fall time Tr/Tf | Speed 10; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 8 ns | 75 |
| Maximum frequency Fmax | Speed 11; C=30 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 60 MHz | 75 |
| Maximum frequency Fmax | Speed 11; C=30 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 30 MHz | 75 |
| Maximum frequency Fmax | Speed 11; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V; maximum system frequency limited to 64 MHz | max 80 MHz | 75 |
| Maximum frequency Fmax | Speed 11; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 40 MHz | 75 |
| Output rise and fall time Tr/Tf | Speed 11; C=30 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 5.5 ns | 75 |
| Output rise and fall time Tr/Tf | Speed 11; C=30 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 11 ns | 75 |
| Output rise and fall time Tr/Tf | Speed 11; C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V | max 2.5 ns | 75 |
| Output rise and fall time Tr/Tf | Speed 11; C=10 pF, 1.6 V ≤ VDDIO1 ≤ 2.7 V | max 5 ns | 75 |
| Maximum frequency Fmax | Fm+; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 3.6 V | max 1 MHz | 75 |
| Output fall time Tf | Fm+; C=50 pF, 1.6 V ≤ VDDIO1 ≤ 3.6 V; between 70% and 30% of output waveform | max 5 ns | 75 |
| NRST Schmitt trigger voltage hysteresis Vhys(NRST) | typ 200 mV | 76 | |
| Weak pull-up equivalent resistor RPU | VIN = VSS | min 25 · typ 40 · max 55 kΩ | 76 |
| NRST input filtered pulse VF(NRST) | max 70 ns | 76 | |
| NRST input not filtered pulse VNF(NRST) | 1.7 V ≤ VDD ≤ 3.6 V | min 350 ns | 76 |
| Supply voltage VDD | min 1.62 · max 3.6 V | 77 | |
| Booster startup time tSU(BOOST) | max 240 us | 77 | |
| Booster consumption IDD(BOOST) | 1.62 V ≤ VDD ≤ 2.0 V | max 250 uA | 77 |
| Booster consumption IDD(BOOST) | 2.0 V ≤ VDD ≤ 2.7 V | max 500 uA | 77 |
| Booster consumption IDD(BOOST) | 2.7 V ≤ VDD ≤ 3.6 V | max 900 uA | 77 |
| Analog supply voltage VDDA | min 1.62 · max 3.6 V | 77 | |
| Positive reference voltage VREF+ | VDDA ≥ 2 V; maximum VDDA | min 2 V | 77 |
| ADC consumption from VDDA IDDA(ADC) | fs = 2.5 MSps | typ 410 uA | 79 |
| ADC consumption from VDDA IDDA(ADC) | fs = 1 MSps | typ 164 uA | 79 |
| ADC consumption from VDDA IDDA(ADC) | fs = 10 kSps | typ 17 uA | 79 |
| ADC consumption from VREF+ IDDV(ADC) | fs = 2.5 MSps | typ 65 uA | 79 |
| ADC consumption from VREF+ IDDV(ADC) | fs = 1 MSps | typ 26 uA | 79 |
| ADC consumption from VREF+ IDDV(ADC) | fs = 10 kSps | typ 0.26 uA | 79 |
| Max. RAIN RAIN | 12 bits; sampling cycle at 35 MHz = 1.5; sampling time = 43 ns | max 50 Ω | 79 |
| Max. RAIN RAIN | 12 bits; sampling cycle at 35 MHz = 3.5; sampling time = 100 ns | max 680 Ω | 79 |
| Max. RAIN RAIN | 12 bits; sampling cycle at 35 MHz = 7.5; sampling time = 214 ns | max 2200 Ω | 79 |
| Max. RAIN RAIN | 12 bits; sampling cycle at 35 MHz = 12.5; sampling time = 357 ns | max 4700 Ω | 79 |
| Max. RAIN RAIN | 12 bits; sampling cycle at 35 MHz = 19.5; sampling time = 557 ns | max 8200 Ω | 79 |
| Max. RAIN RAIN | 12 bits; sampling cycle at 35 MHz = 39.5; sampling time = 1129 ns | max 15000 Ω | 79 |
| Max. RAIN RAIN | 12 bits; sampling cycle at 35 MHz = 79.5; sampling time = 2271 ns | max 33000 Ω | 79 |
| Max. RAIN RAIN | 12 bits; sampling cycle at 35 MHz = 160.5; sampling time = 4586 ns | max 50000 Ω | 79 |
| Max. RAIN RAIN | 10 bits; sampling cycle at 35 MHz = 1.5; sampling time = 43 ns | max 68 Ω | 79 |
| Max. RAIN RAIN | 10 bits; sampling cycle at 35 MHz = 3.5; sampling time = 100 ns | max 820 Ω | 79 |
| Max. RAIN RAIN | 10 bits; sampling cycle at 35 MHz = 7.5; sampling time = 214 ns | max 3300 Ω | 79 |
| Max. RAIN RAIN | 10 bits; sampling cycle at 35 MHz = 12.5; sampling time = 357 ns | max 5600 Ω | 79 |
| Max. RAIN RAIN | 10 bits; sampling cycle at 35 MHz = 19.5; sampling time = 557 ns | max 10000 Ω | 79 |
| Max. RAIN RAIN | 10 bits; sampling cycle at 35 MHz = 39.5; sampling time = 1129 ns | max 22000 Ω | 79 |
| Max. RAIN RAIN | 10 bits; sampling cycle at 35 MHz = 79.5; sampling time = 2271 ns | max 39000 Ω | 79 |
| Max. RAIN RAIN | 10 bits; sampling cycle at 35 MHz = 160.5; sampling time = 4586 ns | max 50000 Ω | 79 |
| Thermal resistance Θ | TSSOP20 6.4 × 4.4 mm; Junction-to-ambient; value column | typ 94 °C/W | 116 |
| Thermal resistance Θ | TSSOP20 6.4 × 4.4 mm; Junction-to-board; value column | typ 55 °C/W | 116 |
| Thermal resistance Θ | TSSOP20 6.4 × 4.4 mm; Junction-to-case; value column | typ 26 °C/W | 116 |

OpenModbus/OM-64DO
A compact industrial-grade 64-channel Modbus RTU output module.

Celnardur/rfc_tackle_sensor
Open a git bash terminal in the directory of your choosing and call the following command:


qsbird/smart-apo
Smart Apo and underwater sensor Rev.A engineering prototype

Scienceche/microduck-journal
对 fanhao375/microduck-replica / OSHWhub imutoservo 团购板 的复刻实作记录: 一块自己焊的 IMU 总线板(STM32G031 + LSM6DSV16X + SN74LVC2G241)、一个 Radxa Zero 3W 主控、 15 颗飞特 HD1910、自训 RL 步态策略,以及把这一切调通的全部血泪。

Takazudo/zudo-led-lamp
USB-PD powered LED lamp with fire/wave-like brightness modulation.

bicknell/DCC-Mobile-Decoder
DCC Mobile Decoder Reference Implementation Hardware & Software

Karpuls/E0001-fader-driver-board
Motorized fader driver board (ALPS RSA0N11M9A0J clone): STM32C051, DRV8210P, touch sense, I2C
Yes. The symbol is MCU_ST_STM32G0:STM32G031F8Px and the footprint Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
TSSOP-20, with 20 pins. Its footprint is drawn on this page.
STMicroelectronics publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C529334, with 4,755 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the STM32G030F6P6 by STMicroelectronics, the AT32F421F8P7 by ARTERY, the AT32F425F8P7 by ARTERY and the GD32E230F6P6TR by GigaDevice Semicon Beijing. Check their datasheets: a part that fits the footprint may still differ in its ratings.
11 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.