Skip to the content
123456

RY8310

RYCHIP Semiconductor Inc.Extended

-40℃~+85℃@(TA) 1 1.4MHz 1A 4.5V~30V 600uA Adjustable Buck Buck Built-in Yes SOT-23-6 DC-DC Converters ROHS

Part id
rychip-semiconductor-inc/RY8310
Category
DC DC Converters
Package
SOT-23-6
Pins
6
In stock
24,208 at JLCPCB (C370876)
Used on
13 open-source boards

Overview

The RY8310 is a DC DC Converter made by RYCHIP Semiconductor Inc. in a SOT-23-6 package with 6 pins. -40℃~+85℃@(TA) 1 1.4MHz 1A 4.5V~30V 600uA Adjustable Buck Buck Built-in Yes SOT-23-6 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ASP8120-ZC-R, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 24,208 are in stock at JLCPCB (part C370876). 13 open-source boards in 9 repositories on GitHub use it.

Symbol

1BS2GND3FB4EN5IN6SW
EasyEDA_Cloud:ASP8120-ZC-RFrom EasyEDA

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

Pinout

6
The pins of the RY8310
PinNameType
1BSUnspecified
2GNDUnspecified
3FBUnspecified
4ENUnspecified
5INUnspecified
6SWUnspecified

Open-source boards using it

13See all 13
  • 2 layersLEDTischLampe, the printed circuit board in 3D

    LEDTischLampe

    RainbowLabsDE/TheLAEMPAN

    Für so ne Lampe von IKEA ein Custom PCB

    121 parts15MIT
  • 2 layers16.6 × 11.8 mmEsplog hv, the printed circuit board in 3D

    Esplog hv

    VladimirP1/esplog-hardware

    35 parts5
  • 2 layers180 × 131.1 mmCCController, the printed circuit board in 3D

    CCController

    RainbowLabsDE/LightInstallationController

    PCB and Firmware of our first universal RGB light installation controller.

    92 parts4MIT
  • 2 layers25 × 46.3 mmDimmer, the printed circuit board in 3D

    Dimmer

    flaviut/led-dimmer

    Open-source hardware for dimming LED strips, using ESPHome software

    47 parts2
  • 4 layers50 × 62 mmPowermeter1P1I, the printed circuit board in 3D

    Powermeter1P1I

    RainbowLabsDE/PowerMeasure_1Ph

    this repo is still undergoing major changes and should not yet be rebuilt

    79 parts1MIT
  • 4 layers119 × 39 mmController Room, the printed circuit board in 3D

    Controller Room

    crexodon/LED-Window-Matrix-Neo

    Turning the campus building into a led display

    79 partsMIT
  • 4 layers45 × 60 mmWCH ETH LOW, the printed circuit board in 3D

    WCH ETH LOW

    RainbowLabsDE/WCH-ETH-LowBudget

    176 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the RY8310?

Yes. The symbol is EasyEDA_Cloud:ASP8120-ZC-R and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the RY8310?

SOT-23-6, with 6 pins. Its footprint is drawn on this page.

Where is the RY8310 datasheet?

RYCHIP Semiconductor Inc. publishes it: the Datasheet link on this page opens it.

Where can I order the RY8310?

JLCPCB lists it as part C370876, with 24,208 in stock; the sellers' links on this page open their listings.

What can replace the RY8310?

Parts like it in the library: the TPS562201DDC by Texas Instruments, the TPS561201DDCR by Texas Instruments, the SX1308 by SX and the ETA8120S2G by etasolution. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the RY8310?

13 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.