
CCController
RainbowLabsDE/LightInstallationController
PCB and Firmware of our first universal RGB light installation controller.

this repo is still undergoing major changes and should not yet be rebuilt
Powermeter1P1I is an open-source printed circuit board by RainbowLabsDE, from the RainbowLabsDE/PowerMeasure_1Ph repository on GitHub, published under the MIT licence. It is a 4-layer board of 50 × 62 mm with 79 parts on 70 nets, routed with 511 tracks and 84 vias.
It is built around the CH32V003F4U6, MAX485ED and TEA 1-0505, with the RY8310, XC6206P332MR and AO3401A among its other parts. Its parts include 31 resistors, 17 capacitors, 9 connectors, 8 ICs and 6 diodes. It belongs with the RISC-V boards of this library.
this repo is still undergoing major changes and should not yet be rebuilt
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 4k7 | Resistor_SMD:R_0402_1005Metric | R7, R9, R13, R14, R15, R16, R17, R18, R19, R20, R27 |
| 8 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C3, C10, C11, C12, C13, C14, C15 |
| 5 | 390k | Resistor_SMD:R_0603_1608Metric | R22, R23, R24, R25, R26 |
| 4 | Conn_01x01_Socket | TestPoint:TestPoint_THTPad_3.0x3.0mm_Drill1.5mm | J4, J5, J6, J7 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H1, H2, H3, H4 |
| 3 | 510 | Resistor_SMD:R_0603_1608Metric | R21, R28, R30 |
| 3 | 68n | Capacitor_SMD:C_0402_1005Metric | C7, C8, C9 |
| 3 | LED_ARGB | LCSC:LED-ARRAY-SMD_MHS110FRGBCT | D3, D5, D6 |
| 2 | 10 | Resistor_SMD:R_1206_3216Metric | R6, R10 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R4, R8 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R12, R29 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C16, C19 |
| 2 | 22u | Capacitor_SMD:C_1210_3225Metric | C5, C6 |
| 2 | Conn_01x02_Socket | Techbeard:LPT2,5-2-5,0 | J3, J8 |
| 2 | Conn_01x04_Pin | LCSC:CONN-SMD_HCZZ0451-4 | J1, J2 |
| 2 | D_TVS | Diode_SMD:D_0402_1005Metric | D1, D4 |
| 1 | 0,2A | Fuse:Fuse_0603_1608Metric | F2 |
| 1 | 120 | Capacitor_SMD:C_0402_1005Metric | R5 |
| 1 | 15V | Diode_SMD:D_SOD-323 | D2 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 4.7u | LCSC:IND-SMD_L2.0-W1.6 | L2 |
| 1 | 47k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 52.50 k | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | AO3401A | Package_TO_SOT_SMD:TSOT-23 | Q2 |
| 1 | BL0942_C2909509 | LCSC:TSSOP-14_L5.0-W4.4-P0.65-LS6.4-BL | U2 |
| 1 | C | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | CH32V003F4U6 | Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm_ThermalVias | IC1 |
| 1 | HOLRS1050-1MR-1% | LCSC:R3920 | R31 |
| 1 | MAX485 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | NC | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | NC | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | RY8310 | Package_TO_SOT_SMD:SOT-23-6 | IC3 |
| 1 | SW_Push | LCSC:SW-SMD_TS24CA | SW1 |
| 1 | TEA1-0505 | Converter_DCDC:Converter_DCDC_TRACO_TEA1-xxxx_THT | U5 |
| 1 | TagConnect | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J9 |
| 1 | XC6206P332MR | LCSC:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | U3 |
| 1 | ~ | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U7 |
| 1 | ~ | Techbeard:VACDiff | U4 |

RainbowLabsDE/LightInstallationController
PCB and Firmware of our first universal RGB light installation controller.



NA-varez/OMNIXIE
Nixie driver board to enable easy inclusion of a Nixie tube into projects. One common driver board to support a wide range of Nixie Indicator Tubes

cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.


YeetTheAnson/MerlynCAM
An action camera that records at 1080p@90, 1440p@60 and 4k@20 (With I2S microphone and gyro logging @ 150Hz)

YeetTheAnson/RFly-One
Offline general aviation proximity awareness system with support for ADS-B, FLARM AIR V7, OGNTP and FANET+
It measures 50 × 62 mm and has 4 copper layers, 1.6 mm thick.
79 parts, built around the CH32V003F4U6, MAX485ED, TEA 1-0505 and RY8310. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RainbowLabsDE/PowerMeasure_1Ph repository on GitHub, at the commit this page was made from: the board is Hardware/Powermeter1P1I.kicad_pcb and its schematic Hardware/P1I1_DCPowerBus.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).