Skip to the content
123456789101112

QMA7981

QSTExtended

-40℃~+85℃ 1.71V~3.6V 14bit 1uA Accelerometer SPI、I2C X,Y,Z ±32g LGA-12(2x2) Accelerometers ROHS

Part id
qst/QMA7981
Category
Accelerometers
Package
LGA-12(2x2)
Pins
12
In stock
0 at JLCPCB (C457290)
Used on
8 open-source boards

Overview

The QMA7981 is an accelerometer made by QST in a LGA-12(2x2) package with 12 pins. -40℃~+85℃ 1.71V~3.6V 14bit 1uA Accelerometer SPI、I2C X,Y,Z ±32g LGA-12(2x2) Accelerometers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:QMA6100, from EasyEDA) and its footprint (4ms_Package_QFP:LGA-12_2x2mm_P0.5mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C457290). 8 open-source boards in 6 repositories on GitHub use it.

Symbol

1AD02SDX3VDDIO4RESV15INT16INT27VDD8GNDIO9GND10SENB11RESV212SCX
EasyEDA_Cloud:QMA6100From EasyEDA

Footprint

123456789101112
4ms_Package_QFP:LGA-12_2x2mm_P0.5mmFrom KiCad's library

Pinout

12
The pins of the QMA7981
PinNameType
1AD0Unspecified
2SDXUnspecified
3VDDIOUnspecified
4RESV1Unspecified
5INT1Unspecified
6INT2Unspecified
7VDDUnspecified
8GNDIOUnspecified
9GNDUnspecified
10SENBUnspecified
11RESV2Unspecified
12SCXUnspecified

Open-source boards using it

8
  • 2 layers131.2 × 95.7 mmSwadge S2-Devkit, the printed circuit board in 3D

    Swadge S2-Devkit

    AEFeinstein/Super-2023-Swadge-HW

    Swadge devkit for an ESP32-S2 with all the bells and whistles

    86 parts17MIT
  • 2 layers60 × 146.5 mmTilda6-bot, the printed circuit board in 3D

    Tilda6-bot

    emfcamp/TiDAL-Hardware

    88 parts4
  • 2 layers12.1 × 36.7 mmJLCPCB HOLIDAY PROJECT, the printed circuit board in 3D

    JLCPCB HOLIDAY PROJECT

    WingTechCorner/WTC_PROJECT-XMAS-USB-ORNAMENT

    A little cool XMAS project

    70 parts1
  • 2 layers154 × 159 mmHellen1-72, the printed circuit board in 3D

    Hellen1-72

    rusefi/hellen-miata-NB2

    a rusEFI board with a 72 pin connector. Works for a Mazda Miata NB2 or any generic 8 cylinder vehicle :)

    163 parts
  • 2 layers20.3 × 50.4 mmCh32v003f4u6 opendant, the printed circuit board in 3D

    Ch32v003f4u6 opendant

    cnlohr/cnhardware

    My dumping grounds for all my kicad projects and random hardware bringup.

    62 parts114
  • 2 layers20.3 × 50.4 mmCh32v003f4u6 pendant, the printed circuit board in 3D

    Ch32v003f4u6 pendant

    cnlohr/cnhardware

    My dumping grounds for all my kicad projects and random hardware bringup.

    57 parts114
  • 2 layers60 × 146.5 mmTilda6, the printed circuit board in 3D

    Tilda6

    emfcamp/TiDAL-Hardware

    44 parts4

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the QMA7981?

Yes. The symbol is EasyEDA_Cloud:QMA6100 and the footprint 4ms_Package_QFP:LGA-12_2x2mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the QMA7981?

LGA-12(2x2), with 12 pins. Its footprint is drawn on this page.

Where is the QMA7981 datasheet?

QST publishes it: the Datasheet link on this page opens it.

Where can I order the QMA7981?

JLCPCB lists it as part C457290, with 0 in stock; the sellers' links on this page open their listings.

What can replace the QMA7981?

Parts like it in the library: the LIS2DW12 by STMicroelectronics, the SC7A20HTR by Hangzhou Silan Microelectronics, the LSM303AGR by STMicroelectronics and the QMA6100P by QST. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the QMA7981?

8 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.