6 layers200 × 75 mm
FUSB302B11MPX
onsemiExtended
-40℃~+85℃ 25uA 3.3V、5V 560mA Controller USB 3.1 MLP-14 USB Converters ROHS
- Part id
- onsemi/FUSB302B11MPX
- Category
- USB Converters
- Package
- MLP-14
- Pins
- 14
- In stock
- 6 at JLCPCB (C891306)
- Used on
- 7 open-source boards
Overview
The FUSB302B11MPX is a USB Converter made by onsemi in a MLP-14 package with 15 pins. -40℃~+85℃ 25uA 3.3V、5V 560mA Controller USB 3.1 MLP-14 USB Converters ROHS.
PCBKit's library has its KiCad symbol (Interface_USB:FUSB302B11MPX, from KiCad's library) and its footprint (Package_DFN_QFN:WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm, from KiCad's library), ready for a KiCad board. 6 are in stock at JLCPCB (part C891306). 7 open-source boards in 6 repositories on GitHub use it.
Symbol
Footprint
Pinout
15| Pin | Name | Type |
|---|---|---|
| 1 | CC2 | Input/output |
| 2 | VBUS | Input |
| 3 | VDD | Power in |
| 4 | VDD | Passive |
| 5 | INT_N | Open collector |
| 6 | SCL | Input |
| 7 | SDA | Input/output |
| 8 | GND | Power in |
| 9 | GND | Passive |
| 10 | CC1 | Input/output |
| 11 | CC1 | Input/output |
| 12 | VCONN | Power in |
| 13 | VCONN | Power in |
| 14 | CC2 | Input/output |
| 15 | GND | Passive |
Open-source boards using it
7- 4 layers76.2 × 15.2 mm
- 4 layers61.4 × 42.6 mm
ESP Smart IoT Power Bank
LUntiedt/Smart_IOT_PowerBank_PCB
A bidirectional USB-C Power Delivery (PD) power bank built around a software-defined PD stack and an I²C buck-boost charger. This repository holds the KiCad hardware design (schematic, layout, BOM, fabrication outputs).
98 parts1 - 4 layers203.1 × 155.8 mm
Nixie 2025 v3
moro696/nixie-clock
here i will post documentation for the nixie clock project.
147 parts1GPL-3.0 - 4 layers85 × 48.6 mm
GPS Compass
bismarx-v1/GPS-Compass
The compass that doesnt point to north, but it points to a GPS location, or a list of locations and points to the nearest one
120 parts1 - 4 layers38 × 60 mm
- 4 layers38 × 60 mm
Parts like it
3
FUSB302BMPX
WFQFN-14(2.5x2.5)-40℃~+125℃ 2.8V~5.5V 25uA Controller USB 3.1 WFQFN-14(2.5x2.5) USB Converters ROHSonsemiUSB ConvertersFUSB302B01MPX
MLP-14(2.5x2.5)-40℃~+85℃ 25uA 3.3V、5V 560mA Controller USB 3.1 MLP-14(2.5x2.5) USB Converters ROHSonsemiUSB ConvertersFUSB302B10MPX
WQFN-14(2.5x2.5)-40℃~+85℃ 25uA 3.3V、5V 560mA Controller USB 3.1 WQFN-14(2.5x2.5) USB Converters ROHSonsemiUSB Converters
Questions
Is there a KiCad symbol and footprint for the FUSB302B11MPX?
Yes. The symbol is Interface_USB:FUSB302B11MPX and the footprint Package_DFN_QFN:WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the FUSB302B11MPX?
MLP-14, with 15 pins. Its footprint is drawn on this page.
Where is the FUSB302B11MPX datasheet?
onsemi publishes it: the Datasheet link on this page opens it.
Where can I order the FUSB302B11MPX?
JLCPCB lists it as part C891306, with 6 in stock; the sellers' links on this page open their listings.
What can replace the FUSB302B11MPX?
Parts like it in the library: the FUSB302BMPX by onsemi, the FUSB302B01MPX by onsemi and the FUSB302B10MPX by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the FUSB302B11MPX?
7 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.