

ESP32Sensor Sensor board
Horticulture Fluorescence Sensor Project
- Size
- 38 × 60 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 68
- Nets
- 103
- Pads
- 351
- Tracks, vias
- 853, 115
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 27 May 2022
- Updated
- 18 Nov 2024
Overview
ESP32Sensor Sensor board is an open-source printed circuit board by LESA-RPI, from the LESA-RPI/hfs.main repository on GitHub. It is a 4-layer board of 38 × 60 mm with 68 parts on 103 nets, routed with 853 tracks and 115 vias.
It is built around the ESP32-C3-WROOM-02-N4, AD620ARZ-REEL7 and AD630ARZ, with the FUSB302B11MPX, OP27GSZ-REEL7 and 219-2MSTR among its other parts. Its parts include 20 resistors, 18 capacitors, 13 ICs, 6 connectors and 3 switches. It belongs with the sensors and measurement boards and the ESP32 and RISC-V boards of this library.
Main components
11ESP32-C3-WROOM-02-N4
SMD,20x18mm-105dBm -40℃~+85℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 Chip Integrated Bluetooth function、Support USB interface On-board PCB Antenna UART、SPI、I2C、I2S、JTAG、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAD620ARZ-REEL7
SOIC-8-18V~-2.3V、2.3V~18V -40℃~+85℃ 0.75V/us 1 1.3mA 100dB 15us 18mA 1MHz 1nA 300nV/℃ 30uV 36V 500pA 9nV/√Hz@1kHz SOIC-8 Instrumentation Amplifiers ROHSAnalog DevicesInstrumentation AmplifiersAD630ARZ
SOIC-20-300mil-16.5V~-5V、5V~16.5V 2MHz SOIC-20-300mil Special Purpose Amplifiers ROHSAnalog DevicesRFID ICsFUSB302B11MPX
MLP-14-40℃~+85℃ 25uA 3.3V、5V 560mA Controller USB 3.1 MLP-14 USB Converters ROHSonsemiUSB ConvertersOP27GSZ-REEL7
SOIC-8-40℃~+85℃ 1 100uV 120dB 15nA 2.8V/us 3.8nV/√Hz@10Hz 400nV/℃ 75nA 8MHz Built-in compensation SOIC-8 Precision Op Amps ROHSAnalog DevicesPrecision Op Amps219-2MSTR
SMD-55℃~+85℃ 100mA 2 20V Black Gull Wing SPST Slide, Rocked SMD DIP Switches ROHSCTS Electronic ComponentsDIP SwitchesFTSH-103-01-L-DH-C-TR
SMD,P=1.27mm,卧贴-55℃~+125℃ 1.27mm 1.27mm 2 3.05mm 3.4A 6P Black Gold Phosphor bronze Pin Header Surface Mount, Right Angle SMD,P=1.27mm,卧贴 Pin Headers ROHSSamtecPin HeadersPPTC041LFBN-RC
插件,P=2.54mm-40℃~+105℃ 1 1x4P 2.54mm 250V 3A 4P 8.51mm Phosphor bronze Square Hole Through Hole Tin Top Plugin,P=2.54mm Female Headers ROHSSullins Connector SolutionsFemale HeadersMMSZ5231B
SOD-123-65℃~+150℃ 1 Independent 1.6kΩ 17Ω 370mW 4.85V~5.36V 5.1V 5uA@2V SOD-123 Zener Diodes ROHSDiodes IncorporatedZener DiodesPJ-036AH-SMT-TR
SMD-25℃~+85℃ 11mm 14.5mm 15.2mm 24V 2mm 5A 6.3mm DC Power Jack Surface Mount, Right Angle SMD DC Power Connectors ROHSCUIDC Power ConnectorsSRV05-4L-TP
SOT-23-6L-55℃~+150℃ 1.5pF 12A@8/20us 17.5V 1uA 350W@8/20us 5V 9V ESD Four channels IEC 61000-4-2、IEC 61000-4-4 SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHSMicro Commercial ComponentsESD And Surge Protection (TVS/ESD)
README
README.mdHorticulture Fluorescence Sensor Project
The Horticulture Fluorescence Sensor (HFS) is a remote chlorophyll-A flourescence sensor. If you are doing any editing of this project, please do it on a branch and merge down after approval. Do not edit directly onto the main branch.
Sensors
This project relies on a controller inside of the sensor casing to run device code. These devices are not connected to wi-fi, instead using BLE communication. For information on how to setup and run the sensor code on a microcontroller, click here.
Data Server and Localhost
Data collected by the sensors is sent to a local data server over BLE. The server connects to wi-fi so that data can be sent to the cloud or accessed via a local webserver. For more information on how to setup and run the server code, click here.
Simulation
A flourescence simulation was created in order to speed up prototype development.
Parts
68| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R3, R7, R19, R20 |
| 4 | 1k @ 100MHz | Inductor_SMD:L_0402_1005Metric | FB1, FB2, FB3, FB4 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C4, C8, C13, C18 |
| 3 | 10uF | Capacitor_SMD:C_0402_1005Metric | C1, C11, C17 |
| 3 | 1M | Resistor_SMD:R_0402_1005Metric | R9, R13, R14 |
| 3 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C5, C10, C14 |
| 3 | 219-2MSTR | footprints:SW_219-2MSTR | S1, S2, S3 |
| 2 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C9, C16 |
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R8 |
| 2 | 200pF | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 20k | Resistor_SMD:R_0402_1005Metric | R15, R18 |
| 2 | FTSH-103-01-L-DH-C-TR | footprints:SAMTEC_FTSH-103-01-L-DH-C-TR | J3, J4 |
| 2 | PPTC041LFBN-RC | footprints:CONN_PPTC041LFBN-RC_SUL | J5, J6 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric | R17 |
| 1 | 0.002uF | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 100uF | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | 12401598E4-2A | footprints:AMPHENOL_12401598E4#2A | J2 |
| 1 | 16466.666 | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 220k | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 4492 | footprints:4492_ADA | U13 |
| 1 | 49400 | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 6.66K | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 7K | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 9880 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | AD620ARZ-REEL7 | footprints:R_8_ADI | U7 |
| 1 | AD630ARZ | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U8 |
| 1 | BC846AS-7 | footprints:SOT6_BC846AS-7_DIO | U4 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U2 |
| 1 | ESP32-C3-WROOM-02-N4 | footprints:IC18_ESP32-C3-WROOM-02-N4_EXP | U1 |
| 1 | FUSB302B11MPX | Package_DFN_QFN:WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm | U3 |
| 1 | LT1054IDWR | footprints:DW16 | U11 |
| 1 | LTC2453IDDB-TRMPBF | footprints:DFN-8_DDB_LIT | U10 |
| 1 | MMSZ5226B-7-F | footprints:SOD123_DIO | CR2 |
| 1 | MMSZ5231B | footprints:SOD123_FAS | CR1 |
| 1 | OP27GSZ-REEL7 | footprints:R_8_ADI | U9 |
| 1 | PJ-036AH-SMT-TR | footprints:CUI_PJ-036AH-SMT-TR | J1 |
| 1 | SN74LVC1G58DRYR | footprints:DRY6 | U6 |
| 1 | SRV05-4L-TP | footprints:SOT23-6L_MCC | CR3 |
| 1 | TLV76733DRVx | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | U5 |
| 1 | TLV76750DRVx | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | U12 |
| 1 | ~ | Library:ODD-42W-Side | PD1 |
More from LESA-RPI/hfs.main
3- 4 layers

- 4 layers38 × 60 mm

- 4 layers41.4 × 53.5 mm

Similar boards
- 2 layers65 × 60 mm

- 6 layers150 × 100 mm

- 4 layers90 × 95 mm

Wiegand bridge
EdgeCoil/wiegand-bridge
ESP32-S3 Wiegand reader bridge for Home Assistant: 4-layer board, BOM and ESPHome firmware.
197 parts1 - 4 layers118 × 250 mm

- 2 layers168.9 × 124.3 mm

OEM ECU
aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware
Volvo MKII Open Hardware
254 parts161CC0-1.0 - 6 layers200 × 75 mm

- 4 layers76.2 × 15.2 mm

- 4 layers200 × 130 mm

PicoAWG
Alberta2514640/EIT-Machine
Arbitrary Waveform Generator for the Raspberry Pi Pico 16 Channels
370 parts1
Questions
How big is the ESP32Sensor Sensor board PCB?
It measures 38 × 60 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ESP32Sensor Sensor board use?
68 parts, built around the ESP32-C3-WROOM-02-N4, AD620ARZ-REEL7, AD630ARZ and FUSB302B11MPX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32Sensor Sensor board KiCad files?
From the LESA-RPI/hfs.main repository on GitHub, at the commit this page was made from: the board is sensor/client-design/Working Modulator Schematic/ESP32Sensor-Sensor_board.kicad_pcb and its schematic sensor/client-design/KiCad/ESP32Sensor-Archive/ESP32Sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32Sensor Sensor board design in my own project?
Its repository states no licence, so its author keeps all rights: ask LESA-RPI before reusing the design.