Skip to the content
1234567891011121314151617181920

AD630ARZ

Analog DevicesExtended

-16.5V~-5V、5V~16.5V 2MHz SOIC-20-300mil Special Purpose Amplifiers ROHS

Part id
adi/AD630ARZ
Category
RFID ICs
Package
SOIC-20-300mil
Pins
20
In stock
0 at JLCPCB (C495335)
Used on
10 open-source boards

Overview

The AD630ARZ is a RFID IC made by Analog Devices in a SOIC-20-300mil package with 20 pins. -16.5V~-5V、5V~16.5V 2MHz SOIC-20-300mil Special Purpose Amplifiers ROHS.

PCBKit's library has its KiCad symbol (Analog:AD630ARZ, from KiCad's library) and its footprint (Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C495335). 10 open-source boards in 6 repositories on GitHub use it.

Symbol

1RinA2CHA+3DIFF_OFF_ADJ14DIFF_OFF_ADJ25CM_OFF_ADJ16CM_OFF_ADJ27B/A8-VS9SEL_B10SEL_A11+VS12COMP13VOUT14RB15RF16RA17RinB18CHB+19CHB-20CHA-
Analog:AD630ARZFrom KiCad's library

Footprint

1234567891011121314151617181920
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mmFrom KiCad's library

Pinout

20
The pins of the AD630ARZ
PinNameType
1RinAInput
2CHA+Input
3DIFF_OFF_ADJ1Passive
4DIFF_OFF_ADJ2Passive
5CM_OFF_ADJ1Passive
6CM_OFF_ADJ2Passive
7B/AOpen collector
8-VSPower in
9SEL_BInput
10SEL_AInput
11+VSPower in
12COMPPassive
13VOUTOutput
14RBOutput
15RFOutput
16RAOutput
17RinBInput
18CHB+Input
19CHB-Input
20CHA-Input

Open-source boards using it

10See all 10
  • 4 layers200 × 130 mmPicoAWG, the printed circuit board in 3D

    PicoAWG

    Alberta2514640/EIT-Machine

    Arbitrary Waveform Generator for the Raspberry Pi Pico 16 Channels

    370 parts1
  • 2 layers106 × 53.3 mmFinalForLayout, the printed circuit board in 3D

    FinalForLayout

    CIDARLAB/Fluorescence-Detector

    42 parts1
  • 4 layersESP32Sensor, the printed circuit board in 3D

    ESP32Sensor

    LESA-RPI/hfs.main

    Horticulture Fluorescence Sensor Project

    95 parts1
  • 2 layers310 × 35 mmTrace, the printed circuit board in 3D

    Trace

    chanulee/lovelace-ruler

    LOVELACE PCB ruler: 55x25 mm reference ruler, KiCad + Figma silkscreen

    100 partsCC-BY-SA-4.0
  • 4 layers132.7 × 89.5 mmStrain guage r0, the printed circuit board in 3D

    Strain guage r0

    ttosu25/SG-3

    Hardware design for a mixed-signal strain-data acquisition system, incorporating sensor excitation, analogue signal conditioning, ADC, and MCU interface

    97 parts
  • 2 layers32 × 49.6 mmQPCR photosensing, the printed circuit board in 3D

    QPCR photosensing

    hisashin/qNinja

    Open source Real-Time Quantitative PCR Implementation

    27 parts48GPL-3.0
  • 2 layers131.8 × 60.1 mmLockinv1.2, the printed circuit board in 3D

    Lockinv1.2

    CIDARLAB/Fluorescence-Detector

    38 parts1

Parts like it

3

Questions

Is there a KiCad symbol and footprint for the AD630ARZ?

Yes. The symbol is Analog:AD630ARZ and the footprint Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AD630ARZ?

SOIC-20-300mil, with 20 pins. Its footprint is drawn on this page.

Where is the AD630ARZ datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the AD630ARZ?

JLCPCB lists it as part C495335, with 0 in stock; the sellers' links on this page open their listings.

What can replace the AD630ARZ?

Parts like it in the library: the EM4094SO20A+ by EM Microelectronic, the EM4094SO20B+ by EM Microelectronic and the FM1701 by FUDAN MICRO. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AD630ARZ?

10 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.