2 layers131.8 × 60.1 mm
2 layers106 × 53.3 mm
FinalForLayout
CIDARLAB/Fluorescence-Detector1- Size
- 106 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 40
- Pads
- 122
- Tracks, vias
- 277, 21
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Aug 2019
- Updated
- 1 Jan 2020
Overview
FinalForLayout is an open-source printed circuit board by CIDARLAB, from the CIDARLAB/Fluorescence-Detector repository on GitHub. It is a 2-layer board of 106 × 53.3 mm with 42 parts on 40 nets, routed with 277 tracks and 21 vias.
It is built around the TL081, AD630ARZ and BPW 21, with the FQP30N06L among its other parts. Its parts include 15 capacitors, 11 resistors, 5 ICs, 4 connectors and 1 diode.
Main components
4
TL081
SOP-8-18V~18V -20℃~+85℃ 1 1.8mA 100pA 200nA 20V/us 3MHz 3mV 85dB Built-in compensation SOP-8 Operational Amplifier ROHSGcoreOperational Amplifier
AD630ARZ
SOIC-20-300mil-16.5V~-5V、5V~16.5V 2MHz SOIC-20-300mil Special Purpose Amplifiers ROHSAnalog DevicesRFID ICs
BPW 21
TO-39-40℃~+80℃ 10V 250mW 2nA 350nm~820nm 550nm 55° TO-39 Photodiodes ROHSOSRAM Opto SemiconPhotodiodes
FQP30N06L
TO-220-3-55℃~+175℃ 1 N-channel 1.04nF 2.5V 20nC 32A 350pF 35mΩ@10V 60V 65pF 79W N-Channel ±20V TO-220-3 MOSFETs ROHSonsemiMOSFETs
README
README.mdFluorescence Detector
Contents
- Lockin-Amplifier - Full implementation of the Fluorescence Detector System
- ADC Test Board - Test Board and default in sister board for ADC for V1 of the Lockin-Amplifier
- Mod-Demod Test Board - Test board for the demodulator testing
- Light Source Modulator Board - Board for Modulating the Light Source (LED/Laser)
Locking Amplifier Specs
| Parameter | Value |
|---|---|
| #Channels | 1 |
| Max Sampling Rate | 2.5 kHz |
| Amplification | x10^8 (140 dB) |
| SNR | TBA |
| Input Voltage Noise | TBA |
| Input Impedance | TBA |
| Voltage Sensitivity Range | TBA to TBA |
| Minimum Step Size | TBA |
| ADC Resolution | 16 bit |
| ADC Interface | SPI (2 wire) |
| Supply Voltage | 24 V |
| Supply Current | 300 mA |
| Supply Pin | 2.5 mm Barrel Jack |
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.01u | Capacitor_THT:C_Disc_D9.0mm_W2.5mm_P5.00mm | C3, C4, C5, C8, C9, C10, C11, C12, C13, C14, C15 |
| 5 | TestPoint | TestPoint:TestPoint_Loop_D2.50mm_Drill1.85mm | TP2, TP3, TP4, TP5, TP6 |
| 4 | Screw_Terminal_01x02 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J1, J2, J3, J4 |
| 4 | TL081 | Package_DIP:DIP-8_W7.62mm | U1, U2, U4, U5 |
| 3 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R10, R11 |
| 3 | 72k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R8, R9 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R6 |
| 1 | 10p | Capacitor_THT:C_Disc_D9.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 1meg | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 1u | Capacitor_THT:C_Disc_D9.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 20n | Capacitor_THT:C_Disc_D9.0mm_W2.5mm_P5.00mm | C7 |
| 1 | 220k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 2n | Capacitor_THT:C_Disc_D9.0mm_W2.5mm_P5.00mm | C6 |
| 1 | AD630ARZ | Package_DIP:DIP-20_W7.62mm | U3 |
| 1 | BPW21 | Package_TO_SOT_THT:TO-5-2_Window | D1 |
| 1 | FQP30N06L | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
More from CIDARLAB/Fluorescence-Detector
3
Similar boards
- 2 layers121.9 × 88.9 mm
- 4 layers26.8 × 26.8 mm
- 2 layers61.2 × 45.2 mm
- 4 layers200 × 130 mm
PicoAWG
Alberta2514640/EIT-Machine
Arbitrary Waveform Generator for the Raspberry Pi Pico 16 Channels
370 parts1 - 4 layers
- 2 layers310 × 35 mm
Trace
chanulee/lovelace-ruler
LOVELACE PCB ruler: 55x25 mm reference ruler, KiCad + Figma silkscreen
100 partsCC-BY-SA-4.0 - 4 layers132.7 × 89.5 mm
Strain guage r0
ttosu25/SG-3
Hardware design for a mixed-signal strain-data acquisition system, incorporating sensor excitation, analogue signal conditioning, ADC, and MCU interface
97 parts - 2 layers32 × 49.6 mm
QPCR photosensing
hisashin/qNinja
Open source Real-Time Quantitative PCR Implementation
27 parts48GPL-3.0
Questions
How big is the FinalForLayout PCB?
It measures 106 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FinalForLayout use?
42 parts, built around the TL081, AD630ARZ, BPW 21 and FQP30N06L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FinalForLayout KiCad files?
From the CIDARLAB/Fluorescence-Detector repository on GitHub, at the commit this page was made from: the board is Lockin-Amplifier/lockin_v1.1/finalForLayout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the FinalForLayout design in my own project?
Its repository states no licence, so its author keeps all rights: ask CIDARLAB before reusing the design.