Skip to the content
123

FQP30N06L

onsemiExtended

-55℃~+175℃ 1 N-channel 1.04nF 2.5V 20nC 32A 350pF 35mΩ@10V 60V 65pF 79W N-Channel ±20V TO-220-3 MOSFETs ROHS

Part id
onsemi/FQP30N06L
Category
MOSFETs
Package
TO-220-3
Pins
3
In stock
0 at JLCPCB (C243087)
Used on
39 open-source boards

Overview

The FQP30N06L is a MOSFET made by onsemi in a TO-220-3 package with 3 pins. -55℃~+175℃ 1 N-channel 1.04nF 2.5V 20nC 32A 350pF 35mΩ@10V 60V 65pF 79W N-Channel ±20V TO-220-3 MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_NMOS_1G_2D_3S, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_THT:TO-220-3_Vertical, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C243087). 39 open-source boards in 26 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_NMOS_1G_2D_3SFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_THT:TO-220-3_VerticalFrom KiCad's library

From the datasheet

9
Drain-source, most
60 V · Drain-source voltage, max · p. 2
Drain current, most
32 A · Continuous drain current at TC = 25°C, max · p. 2
Gate-source, most
20 V · Gate-source voltage magnitude, max ±20 V · p. 2
Junction, hottest
175 °C · Operating junction temperature, max · p. 2
Junction to case (TO-220)
1.9 K/W · Junction-to-case thermal resistance, max · p. 2
Junction to air (TO-220)
62.5 K/W · Junction-to-ambient thermal resistance, max · p. 2
Gate threshold
2.5 V · Gate threshold at VDS = VGS, ID = 250 uA, max · p. 3
On resistance
35 mΩ · VGS = 10 V, ID = 16 A, max · p. 3
On resistance
45 mΩ · VGS = 5 V, ID = 16 A, max · p. 3

What it is and has

6
Device type
N-Channel enhancement mode power MOSFET · p. 2
Gate charge
15 nC typical · p. 2
Reverse transfer capacitance
50 pF typical · p. 2
Avalanche testing
100% Avalanche Tested · p. 2
Maximum junction temperature
175°C · p. 2
Package
TO-220 · p. 3

Specifications

40
ParameterConditionsAs printedPage
Drain-Source Voltage VDSSTC = 25°C unless otherwise notedmax 60 V2
Drain Current - Continuous IDTC = 25°Cmax 32 A2
Drain Current - Continuous IDTC = 100°Cmax 22.6 A2
Drain Current - Pulsed IDMTC = 25°C; Note 1: Pulse width limited by maximum junction temperaturemax 128 A2
Gate-Source Voltage VGSSTC = 25°Cmin -20 · max 20 V2
Single Pulsed Avalanche Energy EASNote 2: L = 400 uH, IAS = 32 A, VDD = 25 V, RG = 25 Ω, starting TJ = 25°Cmax 350 mJ2
Avalanche Current IARTC = 25°C; Note 1: Pulse width limited by maximum junction temperaturemax 32 A2
Repetitive Avalanche Energy EARTC = 25°C; Note 1: Pulse width limited by maximum junction temperaturemax 7.9 mJ2
Peak Diode Recovery dv/dt dv/dtNote 3: ISD ≤ 32 A, di/dt ≤ 300 A/us, VDD ≤ BVDSS, starting TJ = 25°Cmax 7 V/ns2
Power Dissipation PDTC = 25°Cmax 79 W2
Power Dissipation - Derate above 25°C PDTC above 25°Cmax 0.53 W/°C2
Operating and Storage Temperature Range TJ, TSTGmin -55 · max 175 °C2
Maximum Lead Temperature for Soldering TL1/8" from Case for 5 secondsmax 300 °C2
Thermal Resistance, Junction-to-Case, Max. RθJCTO-220max 1.9 °C/W2
Thermal Resistance, Junction-to-Ambient, Max. RθJATO-220max 62.5 °C/W2
Drain-Source Breakdown Voltage BVDSSTC = 25°C; VGS = 0 V, ID = 250 uAmin 60 V3
Breakdown Voltage Temperature Coefficient ΔBVDSS / ΔTJID = 250 uA, Referenced to 25°Ctyp 0.06 V/°C3
Zero Gate Voltage Drain Current IDSSTC = 25°C; VDS = 60 V, VGS = 0 Vmax 1 uA3
Zero Gate Voltage Drain Current IDSSVDS = 48 V, TC = 150°Cmax 10 uA3
Gate-Body Leakage Current, Forward IGSSFTC = 25°C; VGS = 20 V, VDS = 0 Vmax 100 nA3
Gate-Body Leakage Current, Reverse IGSSRTC = 25°C; VGS = -20 V, VDS = 0 Vmax -100 nA3
Gate Threshold Voltage VGS(th)TC = 25°C; VDS = VGS, ID = 250 uAmin 1 · max 2.5 V3
Static Drain-Source On-Resistance RDS(on)TC = 25°C; VGS = 10 V, ID = 16 Atyp 0.027 · max 0.035 Ω3
Static Drain-Source On-Resistance RDS(on)TC = 25°C; VGS = 5 V, ID =16 Atyp 0.035 · max 0.045 Ω3
Forward Transconductance gFSTC = 25°C; VDS = 25 V, ID = 16 Atyp 24 S3
Input Capacitance CissTC = 25°C; VDS = 25 V, VGS = 0 V, f = 1.0 MHztyp 800 · max 1040 pF3
Output Capacitance CossTC = 25°C; VDS = 25 V, VGS = 0 V, f = 1.0 MHztyp 270 · max 350 pF3
Reverse Transfer Capacitance CrssTC = 25°C; VDS = 25 V, VGS = 0 V, f = 1.0 MHztyp 50 · max 65 pF3
Turn-On Delay Time td(on)TC = 25°C; VDD = 30 V, ID = 16 A, RG = 25 Ω; Note 4typ 15 · max 40 ns3
Turn-On Rise Time trTC = 25°C; VDD = 30 V, ID = 16 A, RG = 25 Ω; Note 4typ 210 · max 430 ns3
Turn-Off Delay Time td(off)TC = 25°C; VDD = 30 V, ID = 16 A, RG = 25 Ω; Note 4typ 60 · max 130 ns3
Turn-Off Fall Time tfTC = 25°C; VDD = 30 V, ID = 16 A, RG = 25 Ω; Note 4typ 110 · max 230 ns3
Total Gate Charge QgTC = 25°C; VDS = 48 V, ID = 32 A, VGS = 5 V; Note 4typ 15 · max 20 nC3
Gate-Source Charge QgsTC = 25°C; VDS = 48 V, ID = 32 A, VGS = 5 V; Note 4typ 3.5 nC3
Gate-Drain Charge QgdTC = 25°C; VDS = 48 V, ID = 32 A, VGS = 5 V; Note 4typ 8.5 nC3
Maximum Continuous Drain-Source Diode Forward Current ISTC = 25°Cmax 32 A3
Maximum Pulsed Drain-Source Diode Forward Current ISMTC = 25°Cmax 128 A3
Drain-Source Diode Forward Voltage VSDTC = 25°C; VGS = 0 V, IS = 32 Amax 1.5 V3
Reverse Recovery Time trrTC = 25°C; VGS = 0 V, IS = 32 A, dIF / dt = 100 A/ustyp 60 ns3
Reverse Recovery Charge QrrTC = 25°C; VGS = 0 V, IS = 32 A, dIF / dt = 100 A/ustyp 90 nC3

Ordering codes, by the datasheet

1
FQP30N06L
TO-220 · Tube packing, 50 units · p. 3

Open-source boards using it

39See all 39
  • 2 layers68.6 × 53.3 mmProtogasm Board V2, the printed circuit board in 3D

    Protogasm Board V2

    Edging-Machines/Edging-Machines

    This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.

    14 parts67MIT
  • 2 layers76.2 × 48.9 mmEpaper clock, the printed circuit board in 3D

    Epaper clock

    mattwach/epaper_clock

    Autosetting clock based on an epaper display. Runs about a year on batteries and has basic weather telemetry (temperature, pressure, humidity).

    14 parts48Apache-2.0
  • 2 layers98 × 83.8 mmProjeto placa, the printed circuit board in 3D

    Projeto placa

    phfbertoleti/placa_lorawan

    Repositório oficial da placa LoRaWAN, um kit de desenvolvimento para protótipos IoT.

    39 parts19MIT
  • 2 layers152.4 × 63.7 mmCut down control board, the printed circuit board in 3D

    Cut down control board

    dwkennedy/ballooning

    Mutli-function balloon related project (variometer, balloon cut-down, let down reel, tracking)

    52 parts2GPL-3.0
  • 2 layers106 × 53.3 mmFinalForLayout, the printed circuit board in 3D

    FinalForLayout

    CIDARLAB/Fluorescence-Detector

    42 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the FQP30N06L?

Yes. The symbol is Pinmap_Generic:Q_NMOS_1G_2D_3S and the footprint Package_TO_SOT_THT:TO-220-3_Vertical, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the FQP30N06L?

TO-220-3, with 3 pins. Its footprint is drawn on this page.

Where is the FQP30N06L datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the FQP30N06L?

JLCPCB lists it as part C243087, with 0 in stock; the sellers' links on this page open their listings.

What can replace the FQP30N06L?

Parts like it in the library: the IRF540NPBF by Infineon Technologies, the IRLZ44NPBF-HXY by HXY MOSFET, the IPP075N15N3G by Infineon Technologies and the IRF540NPBF-JSM by JSMSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the FQP30N06L?

39 boards in 26 repositories on GitHub; the most starred are listed on this page, with their KiCad files.