
Projeto placa
phfbertoleti/placa_lorawan
Repositório oficial da placa LoRaWAN, um kit de desenvolvimento para protótipos IoT.

Placa - Monitoramento LoRaWAN
Placa manutencao preventiva is an open-source printed circuit board by phfbertoleti, from the phfbertoleti/placa_monitoramento_lorawan repository on GitHub, published under the MIT licence. It is a 2-layer board of 58.4 × 74.7 mm with 23 parts on 13 nets, routed with 118 tracks and 0 vias.
It is built around the BMP180, LM7805 and FQP30N06L. Its parts include 8 connectors, 4 resistors, 3 diodes, 2 capacitors and 2 ICs. It belongs with the radio and wireless boards and the AVR (ATmega, ATtiny) boards of this library.
Este é o repositório oficial da placa "Monitamento LoRaWAN" / placa "manutenção preventiva". Esta placa é um projeto open-source de minha autoria para monitamento de variáveis via LoRaWAN e para uso em algumas aplicações de manutenção preventiva. Este projeto faz uso do módulo Heltec wifi LoRa V1 (com conectividades LoRa/LoRaWAN, BLE e wi-fi).

Essa placa tem objetivo de facilitar o desenvolvimento de protótipos em Internet das Coisas, principalmente para aqueles focados em monitoramento remoto e manutenção preventiva. Para facilitar a montagem e uso, o Heltec wifi LoRa V1 e os módulos sensores são conectados em soquetes / barras de pinos do tipo fêmea. A placa suporta os seguintes módulos sensores:
Ainda, a placa possui entrada digital (3.3V - 12V), que pode ser usada também para entradas pulsadas.
Quanto à alimentação, essa placa permite:
Para facilitar o uso, a placa possui furação idêntica ao Arduino UNO. Dessa forma, fica mais simples projetar cases ou utilizar cases já fabricados.
Esta placa, usada juntamente com um módulo Heltec wifi LoRa V1 e os sensores que a placa suporta, compreende as seguintes funcionaliades:
Resposta curta: 100% do projeto. Ou seja:
Para ver a BOM interativa, clique aqui
Claro. Sinta-se a vontade para contribuir com o projeto. Toda melhoria é bem vinda!
Visite meu site pessoal para ter acesso a quase tudo que publico no Brasil e exterior.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R5 |
| 3 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3 |
| 1 | 0.1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 0.33uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 470k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | Arduino_UNO_R3_OnlyMountingHoles | heltec_wifi_lora_v1:Arduino_UNO_R3_OnlyMountingHoles | |
| 1 | BAT_EXT | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J4 |
| 1 | BAT_HELTEC_CONN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J5 |
| 1 | BMP180 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J7 |
| 1 | ENT_DIGITAL | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_2-G-5.08_1x02_P5.08mm_Vertical | J1 |
| 1 | FQP30N06L | fqp30n06l:TO220V | Q2 |
| 1 | Heltec_Wifi_LoRa_V1 | heltec_wifi_lora_v1:Heltec_WiFi_LoRa_V1 | U1 |
| 1 | LM7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LOGO | logo_monitoramento_lorawan:logo_monitoramento_lorawan_pequeno | G*** |
| 1 | LOGO | logo_monitoramento_lorawan:logo_monitoramento_lorawan | G*** |
| 1 | MPU6050 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J6 |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Renewable energy | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | TESTE_TENSAO | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | J3 |

phfbertoleti/placa_lorawan
Repositório oficial da placa LoRaWAN, um kit de desenvolvimento para protótipos IoT.

Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.

mattwach/epaper_clock
Autosetting clock based on an epaper display. Runs about a year on batteries and has basic weather telemetry (temperature, pressure, humidity).



dwkennedy/ballooning
Mutli-function balloon related project (variometer, balloon cut-down, let down reel, tracking)


It measures 58.4 × 74.7 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the BMP180, LM7805 and FQP30N06L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the phfbertoleti/placa_monitoramento_lorawan repository on GitHub, at the commit this page was made from: the board is Hardware/placa_manutencao_preventiva/placa_manutencao_preventiva.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).