Skip to the content
12345678

MCP6002-E/SN

Microchip TechnologyExtended

-40℃~+125℃ -8V~-2.25V、2.25V~8V 1.8V~5.5V 100uA 1MHz 1pA 1pA 2 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHS

Part id
microchip/MCP6002-E/SN
Category
Operational Amplifier
Package
SOIC-8
Pins
8
In stock
9,084 at JLCPCB (C125816)
Used on
3 open-source boards

Overview

The MCP6002-E/SN is an operational Amplifier made by Microchip Technology in a SOIC-8 package with 8 pins. -40℃~+125℃ -8V~-2.25V、2.25V~8V 1.8V~5.5V 100uA 1MHz 1pA 1pA 2 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (4ms_IC:MCP6002, from 4ms) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 9,084 are in stock at JLCPCB (part C125816). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

12-3+
4ms_IC:MCP6002From 4ms

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the MCP6002-E/SN
PinNameType
1—Output
2-Input
3+Input
4V-Power in
5+Input
6-Input
7—Output
8V+Power in

Open-source boards using it

3
  • 2 layers138.8 × 55 mmMuxPi, the printed circuit board in 3D

    MuxPi

    SamsungSLAV/muxpi

    MuxPi is an open hardware and open software board which was designed to aid in automating tasks on physical devices.

    354 parts22Apache-2.0
  • 2 layers120 × 90 mmCt6-energy monitor, the printed circuit board in 3D

    Ct6-energy monitor

    manoranjan2050/ESP32-AC-Energy-Monitor

    An open-source, DIY mains energy monitor built on an ESP32-S3 DevKit: - up to 6 SCT-013 current transformers (CTs), each channel works with 100A/50mA or 30A/1V CTs - one ZMPT101B voltage sensor - ESPHome firmware…

    81 parts
  • 4 layers122 × 102 mmEXO PCB 1, the printed circuit board in 3D

    EXO PCB 1

    Prosthetics-Exoskeleton/Grip_Exo_PCB_V1

    KiCAD design files for first iteration of grip exoskeleton PCB. Contains 10 sensor ports and space for 5 sets of solenoid valves

    120 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP6002-E/SN?

Yes. The symbol is 4ms_IC:MCP6002 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP6002-E/SN?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP6002-E/SN datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP6002-E/SN?

JLCPCB lists it as part C125816, with 9,084 in stock; the sellers' links on this page open their listings.

What can replace the MCP6002-E/SN?

Parts like it in the library: the LM358D by onsemi, the LM2904D by onsemi, the NE5532D by Texas Instruments and the LM358D by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP6002-E/SN?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.