2 layers89.6 × 55 mm
MuxPi addon template
SamsungSLAV/muxpi
MuxPi is an open hardware and open software board which was designed to aid in automating tasks on physical devices.
56 parts22Apache-2.0
2 layers138.8 × 55 mm
MuxPi
SamsungSLAV/muxpi22MuxPi is an open hardware and open software board which was designed to aid in automating tasks on physical devices.
- Size
- 138.8 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 354
- Nets
- 294
- Pads
- 1,096
- Tracks, vias
- 4,953, 293
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Oct 2018
- Updated
- 5 Oct 2021
Overview
MuxPi is an open-source printed circuit board by SamsungSLAV, from the SamsungSLAV/muxpi repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 138.8 × 55 mm with 354 parts on 294 nets, routed with 4,953 tracks and 293 vias.
It is built around the ATTINY10-TS8R, MCP6002-E/SN and ACS712ELCTR-05B-T, with the FT230XQ-R, ICL7660N and LAN9500A-ABZJ among its other parts. Its parts include 81 capacitors, 71 resistors, 16 connectors, 13 diodes and 13 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
12
ATTINY10-TS8R
SOT-23-6-40℃~+125℃ 1.8V~5.5V 10MHz 1KB 32Byte 4 8 Bit 8bit AVR Built-in FLASH SOT-23-6 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
MCP6002-E/SN
SOIC-8-40℃~+125℃ -8V~-2.25V、2.25V~8V 1.8V~5.5V 100uA 1MHz 1pA 1pA 2 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHSMicrochip TechnologyOperational AmplifierACS712ELCTR-05B-T
SOIC-8-40℃~+85℃ 1.2mΩ 185mV/A 2.1kVrms 3.5us 5A 5V 80kHz Support SOIC-8 Current Sensors ROHSALLEGROCurrent Sensors
FT230XQ-R
QFN-16-EP(4x4)-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART QFN-16-EP(4x4) USB Converters ROHSFTDIUSB Converters
ICL7660N
DIP-83V~9.5V DIP-8 Charge Pumps ROHSHGSEMIDC-DC Converters
LAN9500A-ABZJ
QFN-56-EP(8x8)0℃~+70℃ 1.2V、2.5V、3.3V 480Mbps USB 2.0 USB to Ethernet QFN-56-EP(8x8) USB Converters ROHSMicrochip TechnologyUSB Converters
SN74LVC2T45DCTT
SM-8-40℃~+85℃ 1 1.65V~5.5V 1.65V~5.5V 2 420Mbps Bidirectional Tri-State SM-8 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters93AA56AT-I/OT
SOT-23-6-40℃~+85℃ 1,000,000 cycles 1.8V~5.5V 200 Years 2Kbit 3MHz 6ms Built-in write enable latch (WEL)、Power-down/Power-up protection circuit SPI SOT-23-6 EEPROM ROHSMicrochip TechnologyEEPROM
AT24C02D-SSHM-T
SOP-8-40℃~+85℃ 0.03uA 0.28mA 0.55us 1,000,000 cycles 1.7V~5.5V 1.9ms 100 Years 1MHz 2Kbit Hardware write protection function、Noise suppression function I2C SOP-8 EEPROM ROHSJSMSEMIEEPROM
LD1117S33CTR-HXY
SOT-223-20℃~+85℃ 1.3V@(800mA) 15V 2mA 3.3V 800mA Fixed Over Temperature Protection SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHXY MOSFETVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BLM21PG221SN1D
08051 220Ω@100MHz 2A 45mΩ ±25% 0805 Ferrite Beads ROHSMurataFerrite Beads
ES1AL
SOD-123FLFast Recovery / High Efficiency DiodesJiangsu Changjing Electronics Technology (CJ)
README
README.rstREADME
Parts
354| Qty | Value | Footprint | References |
|---|---|---|---|
| 98 | VIA_0408 | mux-footprints:VIA_0408 | V1, V1, V1, V1, V1, V1, V1, V1, V1, V1, V1, V1, V1, V1, V1, V1 +82 |
| 32 | 100nF/50V | Capacitors_SMD:C_0805 | C1, C2, C3, C4, C10, C13, C18, C19, C21, C22, C23, C24, C25, C27, C28, C44 +16 |
| 25 | 10K | Resistors_SMD:R_0805 | R4, R13, R14, R15, R16, R17, R18, R19, R20, R24, R25, R35, R40, R41, R43, R45 +9 |
| 20 | 100nF/50V | Capacitors_SMD:C_0402 | C32, C34, C35, C36, C37, C38, C39, C40, C42, C56, C57, C60, C61, C62, C63, C64 +4 |
| 9 | 560R | Resistors_SMD:R_0805 | R6, R28, R36, R42, R44, R53, R54, R65, R66 |
| 8 | 2N7002 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2, Q3, Q8, Q9, Q10, Q13, Q14 |
| 6 | 10K 1% | Resistors_SMD:R_0805 | R7, R23, R27, R58, R70, R74 |
| 6 | 120R | Resistors_SMD:R_0805 | R29, R30, R31, R32, R33, R34 |
| 5 | 1uF/16V | Capacitors_SMD:C_0402 | C31, C33, C41, C43, C53 |
| 4 | 0R | Resistors_SMD:R_0805 | R10, R11, R12, R67 |
| 4 | 2.2u/16V | Capacitors_SMD:C_0805 | C11, C12, C14, C15 |
| 4 | 49.9R 1% | Resistors_SMD:R_0805 | R50, R51, R52, R55 |
| 4 | NS25-W2P | Connectors_Molex:Molex_KK-6410-02_02x2.54mm_Straight | P5, P6, P7, P8 |
| 3 | 12k 1% | Resistors_SMD:R_0805 | R39, R48, R49 |
| 3 | 1K 1% | Resistors_SMD:R_0805 | R75, R76, R78 |
| 3 | BLM21PG121SN1D | Resistors_SMD:R_0805 | L3, L4, L5 |
| 3 | BLM21PG221SN1D | Resistors_SMD:R_0805 | L1, L2, L6 |
| 3 | ES1AL | mux-footprints:Sub_SMA | D1, D2, D3 |
| 3 | KPT-2012EC (RED) | Diodes_SMD:D_0805 | D5, D7, D11 |
| 3 | KPT-2012SGC (GREEN) | Diodes_SMD:D_0805 | D4, D9, D10 |
| 2 | 1-1462037-4 | mux-footprints:IM03-SMT_GULL | K1, K2 |
| 2 | 100K | Resistors_SMD:R_0805 | R1, R38 |
| 2 | 10uF/10V | Capacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_Reflow | C81, C82 |
| 2 | 10uF/10V | Capacitors_Tantalum_SMD:Tantalum_Case-A_EIA-3216-18_Reflow | C49, C51 |
| 2 | 1uF/20V | Capacitors_Tantalum_SMD:Tantalum_Case-A_EIA-3216-18_Reflow | C8, C75 |
| 2 | 20pF/50V | Capacitors_SMD:C_0805 | C7, C9 |
| 2 | 27R | Resistors_SMD:R_0805 | R61, R62 |
| 2 | 33p/50V | Capacitors_SMD:C_0805 | C29, C30 |
| 2 | 47pF/50V | Capacitors_SMD:C_0805 | C77, C78 |
| 2 | 5k | MuxPi:Potentiometer_Trimmer_Bourns_3224W | RV2, RV3 |
| 2 | BSO130P03S | mux-footprints:SOIC-8 | Q11, Q12 |
| 2 | DS1021-1*3SF1-1 | Socket_Strips:Socket_Strip_Straight_1x03 | JP1, JP2 |
| 2 | DTSM-62N-V-B | Buttons_Switches_SMD:SW_SPST_PTS645 | SW1, SW2 |
| 2 | MCP6002-E/SN | mux-footprints:SOIC-8 | U2, U15 |
| 2 | MMBT4403LT1 | TO_SOT_Packages_SMD:SOT-23 | Q4, Q5 |
| 2 | PBTD16S | mux-footprints:PBTD16S | P13, P15 |
| 2 | SN74LVC2T45DCTT | mux-footprints:SSOP-8 | U5, U6 |
| 2 | WS2812B | LEDs:LED_WS2812B-PLCC4 | LED1, LED2 |
| 2 | XY2500V-D(5.08)-2PIN | mux-footprints:TerminalBlock_XY2500V-D(5.08) | P2, P3 |
| 1 | MuxPi:qrcode15 | LOGO | |
| 1 | 0ZCG0300FF2B | MuxPi:Fuse_1812_4532Metric | F1 |
| 1 | 100uF/10V | Capacitors_Tantalum_SMD:Tantalum_Case-C_EIA-6032-28_Reflow | C47 |
| 1 | 10nF/50V | MuxPi:C_0805 | C80 |
| 1 | 112K-TBA0-RA1 | mux-footprints:usd-attend | J2 |
| 1 | 1M | Resistors_SMD:R_0805 | R37 |
| 1 | 1uF/50V | MuxPi:C_0805 | C83 |
| 1 | 20K 1% | Resistors_SMD:R_0805 | R22 |
| 1 | 22nF/50V | Capacitors_SMD:C_0805 | C69 |
| 1 | 25.00M-CFPX218 | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y3 |
| 1 | 30K 1% | Resistors_SMD:R_0805 | R71 |
| 1 | 3224W-105-1LF | Potentiometers:Potentiometer_Trimmer_Bourns_3224W | RV1 |
| 1 | 33pF/50V | MuxPi:C_0805 | C55 |
| 1 | 33pF/50V | Capacitors_SMD:C_0805 | C54 |
| 1 | 390R | Resistors_SMD:R_0805 | R3 |
| 1 | 390k | Resistors_SMD:R_0805 | R5 |
| 1 | 4.7K | Resistors_SMD:R_0805 | R59 |
| 1 | 4.7u/16V | Capacitors_Tantalum_SMD:Tantalum_Case-A_EIA-3216-18_Reflow | C26 |
| 1 | 4.7uF/16V | Capacitors_Tantalum_SMD:Tantalum_Case-A_EIA-3216-18_Reflow | C20 |
| 1 | 471511001 (HDMI) | mux-footprints:HDMI | J1 |
| 1 | 8.2K 1% | Resistors_SMD:R_0805 | R72 |
| 1 | 93AA56AT-I/OT | TO_SOT_Packages_SMD:SOT-23-6_Handsoldering | U11 |
| 1 | ABM3B-8.000MHZ-10-1-U-T | Crystals:Crystal_SMD_5032-4pin_5.0x3.2mm | Y1 |
| 1 | ACS712ELCTR-05B-T | mux-footprints:SOIC-8 | U4 |
| 1 | AT24C02D-SSHM-T | mux-footprints:SOIC-8 | IC1 |
| 1 | ATTINY10-TS8R | TO_SOT_Packages_SMD:SOT-23-6 | IC2 |
| 1 | BAR43CFILM | TO_SOT_Packages_SMD:SOT-23 | D12 |
| 1 | BZT52H-C5V6.115 | Diodes_SMD:D_SOD-123F | D8 |
| 1 | CONN_02X03 | Socket_Strips:Socket_Strip_Straight_2x03 | P18 |
| 1 | DMP2035U-7 | MuxPi:SOT-23 | Q6 |
| 1 | DS1021-1*6SF1-1 | Pin_Headers:Pin_Header_Straight_1x06 | P1 |
| 1 | ESW-104-23-T-S | MuxPi:pin_strip_2.54_s_1x4 | P19 |
| 1 | ESW-104-23-T-S | mux-footprints:pin_strip_2.54_s_1x4 | P12 |
| 1 | ESW-112-23-T-D | mux-footprints:pin_strip_2.54_s_2x12 | P14 |
| 1 | ESW-112-23-T-S | mux-footprints:pin_strip_2.54_s_1x12 | P11 |
| 1 | FT230XQ | Housings_DFN_QFN:QFN-16-1EP_4x4mm_Pitch0.65mm | U14 |
| 1 | ICL7660 | mux-footprints:SOIC-8 | U16 |
| 1 | JV-5S-KT | mux-footprints:Relay_SPST-NO_FUJITSU-JV | RL1 |
| 1 | Jumper_NO_Small | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP3 |
| 1 | LAN9500A-ABZJ | mux-footprints:QFN_56 | U12 |
| 1 | LD1117S33CTR | TO_SOT_Packages_SMD:SOT-223 | U10 |
The 325 most common of 354 parts.
More from SamsungSLAV/muxpi
2- 2 layers89.6 × 55 mm
MIR
SamsungSLAV/muxpi
MuxPi is an open hardware and open software board which was designed to aid in automating tasks on physical devices.
41 parts22Apache-2.0
Similar boards
- 4 layers36 × 77 mm
UEther
WebmasterTD/uEther
uEther is Ethernet exansion card designed for Clockwork uConsole.
65 parts2MIT - 4 layers60.9 × 48 mm
- 2 layers50.8 × 49.5 mm
LedFlasherCircuit
rhitvik/RGB_Blinky_Keychain
These are the blinky boards that NYU sent as the welcome gifts for the class of 2024. This RGB Blinky board features RGB breathing lights, PCB Art and doubles as a soldering practice kit.
18 parts1MIT - 6 layers75 × 78.4 mm
Poe backplate
dotstartech/wall-panel
Wall mounted 4 inch touch display panel with CM4 inside
125 parts445 - 4 layers21.6 × 48.4 mm
SDWire
3mdeb/sd-mux
Control application for SD Wire imported from: https://git.tizen.org/cgit/tools/testlab/sd-mux/
83 parts8Apache-2.0 - 4 layers21.6 × 48.4 mm
SDWire
bitsy-ai/printnanny-sdwire
A modified version of Tizen SDWire https://wiki.tizen.org/SDWire
88 parts7Apache-2.0 - 2 layers50 × 132 mm
- 4 layers179.7 × 127.9 mm
Questions
How big is the MuxPi PCB?
It measures 138.8 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MuxPi use?
354 parts, built around the ATTINY10-TS8R, MCP6002-E/SN, ACS712ELCTR-05B-T and FT230XQ-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MuxPi KiCad files?
From the SamsungSLAV/muxpi repository on GitHub, at the commit this page was made from: the board is hw/MuxPi/MuxPi.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MuxPi design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).