4 layers21.6 × 48.4 mm
SDWire
3mdeb/sd-mux
Control application for SD Wire imported from: https://git.tizen.org/cgit/tools/testlab/sd-mux/
83 parts8Apache-2.0
4 layers21.6 × 48.4 mm
A modified version of Tizen SDWire https://wiki.tizen.org/SDWire
- Size
- 21.6 × 48.4 mm
- Copper layers
- 4
- Thickness
- 0.77 mm
- Parts
- 88
- Nets
- 73
- Pads
- 296
- Tracks, vias
- 1,009, 56
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 29 Aug 2022
- Updated
- 17 Jan 2023
Overview
SDWire is an open-source printed circuit board by bitsy-ai, from the bitsy-ai/printnanny-sdwire repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 21.6 × 48.4 mm with 88 parts on 73 nets, routed with 1,009 tracks and 56 vias.
It is built around the FT200XD-R, USB2640-HZH-02 and AT24CS02-SSHM-B, with the MC74HC1G04DTT1G-TP, SPX3819M5-L and MMBT4403LT1 among its other parts. Its parts include 27 capacitors, 17 resistors, 8 diodes, 6 ICs and 3 connectors.
Main components
6
FT200XD-R
DFN-10-EP(3x3)-40℃~+85℃ 125uA 5V 8mA USB 2.0 USB to I2C DFN-10-EP(3x3) USB Converters ROHSFTDIUSB ConvertersUSB2640-HZH-02
QFN-483.3V Hub USB 2.0 QFN-48 USB HUB Controllers ROHSMicrochip TechnologyUSB Converters
AT24CS02-SSHM-B
SOIC-8-40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 100 Years 1MHz 2Kbit 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C SOIC-8 EEPROM ROHSMicrochip TechnologyEEPROM
MC74HC1G04DTT1G-TP
SOT-23-5-40℃~+85℃ 1 1.5V、3.15V、4.2V 1.9V、4.18V、4.4V、5.68V、5.9V 100mV、100mV、100mV、330mV、330mV 10uA 2.6mA 2.6mA 2V~6V 500mV、1.35V、1.8V 74HC 9ns@6V,50pF SOT-23-5 Inverters ROHSTECH PUBLICInvertersSPX3819M5-L
SOT-23-5SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMaxLinearVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MMBT4403LT1
SOT-23-55℃~+150℃ 1 PNP 100nA 200 200MHz 350mW 400mV 40V 5V 600mA PNP SOT-23 Bipolar (BJT) ROHSLGEBipolar (BJT)
README
README.mdprintnanny-sdwire
A modified version of Tizen SDWire https://wiki.tizen.org/SDWire
Parts
88| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100nF/16V | Capacitor_SMD:C_0402_1005Metric | C1, C2, C6, C8, C9, C11, C12, C13, C15, C16, C17, C18, C20, C24, C25, C26 |
| 7 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R2, R8, R9, R10, R16, R17 |
| 5 | 1K | Resistor_SMD:R_0402_1005Metric | R11, R12, R13, R14, R15 |
| 4 | 1uF/16V | Capacitor_SMD:C_0402_1005Metric | C5, C7, C19, C21 |
| 3 | 10uF/10V | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C10, C14, C27 |
| 3 | BLM15PD121SN1D | Inductor_SMD:L_0402_1005Metric | L1, L2, L3 |
| 2 | 27R | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | 33p/50V | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | 47pF | Capacitor_SMD:C_0402_1005Metric | C22, C23 |
| 2 | BLUE | LED_SMD:LED_0402_1005Metric | D3, D7 |
| 2 | GREEN | LED_SMD:LED_0402_1005Metric | D4, D8 |
| 2 | MMBT4403LT1 | TO_SOT_Packages_SMD:SOT-23 | Q3, Q4 |
| 2 | OSB50402C1E | LED_SMD:LED_0402_1005Metric | D1, D6 |
| 2 | RED | LED_SMD:LED_0402_1005Metric | D2, D5 |
| 1 | 12k 1% | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 24MHz | mux-footprints:Crystal_SMD_2520-4pin_2.5x2.0mm | Y1 |
| 1 | 330R | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | AT24CS02-SSHM | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | FT200XD | Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm | U3 |
| 1 | LOGO | PrintNanny:print_nanny | G*** |
| 1 | MC74HC1G04DTT1G | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U4 |
| 1 | SPX3819M5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | TS3A27518EPWR | mux-footprints:TSSOP-24 | U5 |
| 1 | USB2640-HZH-02 | mux-footprints:QFN-48-1EP_7x7mm_Pitch0.5mm | U1 |
| 1 | USB_OTG_MICRO_USB | Connector_USB:USB_Micro-B_Molex-105017-0001 | P1 |
| 1 | uSD Socket | Connector_Card:microSD_HC_Molex_104031-0811 | J2 |
| 1 | usd-plug | connectors:usd | J1 |
The 68 most common of 88 parts.
Similar boards
- 2 layers68.3 × 57.7 mm
Sdmux4
hnz1102/sdcdmux-emmc
SD CARD and eMMC Device Multiplexer with Infrared Remote Controller
115 parts16MIT - 2 layers138.8 × 55 mm
MuxPi
SamsungSLAV/muxpi
MuxPi is an open hardware and open software board which was designed to aid in automating tasks on physical devices.
354 parts22Apache-2.0 - 2 layers80 × 65 mm
DDSFunctionGenerator
RobertGawron/DDSFunctionGenerator
A 6 MHz Direct Digital Synthesis (DDS) function generator, fully configurable via SCPI (Standard Commands for Programmable Instruments) protocol.
156 parts6MIT - 2 layers277.2 × 107.5 mm
- 2 layers85.5 × 50 mm
02-09-24 buissnes card
matmoj04/business-card
PCB business card with RTC and LED 7-segment display powered by button cell battery.
27 parts - 2 layers
Rtc pcb
arpandebnath56/RTC-PCB-Design
KiCad-based RTC Module PCB design featuring circuit schematics, PCB layout, 3D visualization, and custom footprint integration.
10 parts - 2 layers51 × 87.2 mm
STM32 NRF24L01 Sleep mode
OlegDemk/stm32F401CCU_NTF24L01_RX_TX_Sleep
The project base on STM32F401CCU microcontroller and NRF24L01 radio module. Project was create on STM32 Cube IDE.
73 parts
Questions
How big is the SDWire PCB?
It measures 21.6 × 48.4 mm and has 4 copper layers, 0.77 mm thick.
What parts does the SDWire use?
88 parts, built around the FT200XD-R, USB2640-HZH-02, AT24CS02-SSHM-B and MC74HC1G04DTT1G-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SDWire KiCad files?
From the bitsy-ai/printnanny-sdwire repository on GitHub, at the commit this page was made from: the board is board/SDWire.kicad_pcb and its schematic board/SDWire.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SDWire design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).