Skip to the content
4 layers122 × 102 mmEXO PCB 1, the printed circuit board in 3D

KiCAD design files for first iteration of grip exoskeleton PCB. Contains 10 sensor ports and space for 5 sets of solenoid valves

Size
122 × 102 mm
Copper layers
4
Thickness
1.6 mm
Parts
120
Nets
62
Pads
327
Tracks, vias
690, 111
Pours
4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 May 2026
Updated
16 May 2026

Overview

EXO PCB 1 is an open-source printed circuit board by Prosthetics-Exoskeleton, from the Prosthetics-Exoskeleton/Grip_Exo_PCB_V1 repository on GitHub. It is a 4-layer board of 122 × 102 mm with 120 parts on 62 nets, routed with 690 tracks and 111 vias.

It is built around the MCP6002-E/SN, UA78M05IDCY and 1N4148WS, with the IRLML6344TRPBF and UA78M33CDCYR among its other parts. Its parts include 44 resistors, 30 diodes, 21 connectors, 10 transistors and 7 capacitors. It belongs with the ESP32 boards of this library.

Main components

5

README

README.md

Grip_Exo_PCB_V1

KiCAD design files for first iteration of grip exoskeleton PCB. Contains 10 sensor ports and space for 5 sets of solenoid valves

Parts

120
QtyValueFootprintReferences
240Resistor_SMD:R_0805_2012MetricR11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R22, R23, R31, R32, R33, R35 +8
20BZT52BxxDiode_SMD:D_SOD-123FD1, D2, D11, D12, D14, D15, D17, D18, D20, D21, D23, D24, D26, D27, D29, D30 +4
1010KResistor_SMD:R_0805_2012MetricR21, R34, R36, R38, R40, R43, R44, R46, R48, R50
101N4148WSDiode_SMD:D_SOD-323D3, D4, D7, D10, D13, D16, D19, D22, D25, D28
10Conn_01x02B02B-PASK-1:B02B-PASK-1J9, J10, J11, J12, J13, J14, J15, J16, J17, J18
10IRLML6344TRPBFPackage_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10
10Screw_Terminal_01x02Screw_terminal_1X2:CONN_1715721_PXCJ1, J2, J3, J4, J5, J6, J7, J8, J20, J21
51MResistor_SMD:R_0805_2012MetricR5, R6, R7, R8, R9
522KResistor_SMD:R_0805_2012MetricR1, R2, R3, R4, R10
5MCP6002-E/SNMCP6002:SOIC8-N_MC_MCHU2, U3, U4, U5, U6
20.1uFCapacitor_SMD:C_0805_2012MetricC1, C6
20.33uFCapacitor_SMD:C_0805_2012MetricC2, C5
11000uF1000uF:CAP_EEE-FK1H102AM_PANC3
1100nFCapacitor_SMD:C_1206_3216MetricC4
110uFCapacitor_SMD:CP_Elec_8x6.9C7
1Barrel_Jack_SwitchDC_Jack_2.5mm:CONN3_DC10B_CLFJ22
1DEVKIT_V1_ESP32-WROOM-32DEVKIT_V1_ESP32-WROOM-32:MODULE_DEVKIT_V1_ESP32-WROOM-32U1
1UA78M05IDCYUA78M05IDCY:DCY0004A_LU7
1UA78M33CDCYRUA78M33CDCYR:VREG_UA78M33CDCYRVR1

Similar boards

  • 2 layers138.8 × 55 mmMuxPi, the printed circuit board in 3D

    MuxPi

    SamsungSLAV/muxpi

    MuxPi is an open hardware and open software board which was designed to aid in automating tasks on physical devices.

    354 parts22Apache-2.0
  • 2 layers120 × 90 mmCt6-energy monitor, the printed circuit board in 3D

    Ct6-energy monitor

    manoranjan2050/ESP32-AC-Energy-Monitor

    An open-source, DIY mains energy monitor built on an ESP32-S3 DevKit: - up to 6 SCT-013 current transformers (CTs), each channel works with 100A/50mA or 30A/1V CTs - one ZMPT101B voltage sensor - ESPHome firmware…

    81 parts
  • 2 layers104.7 × 55.6 mmLab1, the printed circuit board in 3D

    Lab1

    jsjolund/dmx512-controller-board

    Controller board for DMX512 compatible devices, built around the STM32F4 processor

    96 parts26
  • 2 layers101.8 × 53.5 mmTbot, the printed circuit board in 3D

    Tbot

    tfateba/tbot

    tbot is a self balancing robot made to have fun while learning concepts of several disciplines.

    48 parts5
  • 4 layers42 × 42 mmAxis Basic, the printed circuit board in 3D

    Axis Basic

    andrew153d/AxisDriver

    76 parts1
  • 4 layers142 × 73 mmHalf Bridge Motor Controller, the printed circuit board in 3D

    Half Bridge Motor Controller

    bradport02/Half-Bridge-Motor-Controller

    4-layer half-bridge motor controller (120 A peak / 40 A continuous, 24 V) designed to replace an off-the-shelf controller on a GreenPower electric race car.

    87 parts
  • 2 layers34 × 34 mmByteworker, the printed circuit board in 3D

    Byteworker

    Bytewerk/byteworker-kicad

    Our famous byteworker now available in Kicad

    65 partsCC-BY-SA-4.0
  • 2 layers61.3 × 77 mmAhrs can adapter, the printed circuit board in 3D

    Ahrs can adapter

    gpgreen/ahrs-can-adapter

    Kicad design for Pixhawk 4 flight board to CAN network adapter

    44 partsMIT

Questions

How big is the EXO PCB 1 PCB?

It measures 122 × 102 mm and has 4 copper layers, 1.6 mm thick.

What parts does the EXO PCB 1 use?

120 parts, built around the MCP6002-E/SN, UA78M05IDCY, 1N4148WS and IRLML6344TRPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the EXO PCB 1 KiCad files?

From the Prosthetics-Exoskeleton/Grip_Exo_PCB_V1 repository on GitHub, at the commit this page was made from: the board is EXO_PCB_1/EXO_PCB_1.kicad_pcb and its schematic EXO_PCB_1/EXO_PCB_1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the EXO PCB 1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Prosthetics-Exoskeleton before reusing the design.