Skip to the content
12345678

ATTINY25-20SSU

Microchip TechnologyExtended

-40℃~+85℃ 10bit 128Byte 2.7V~5.5V 20MHz 2KB 6 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHS

Part id
microchip/ATTINY25-20SSU
Category
Microcontrollers (MCU, MPU, SOC)
Package
SOIC-8
Pins
8
In stock
52 at JLCPCB (C2052990)
Used on
7 open-source boards

Overview

The ATTINY25-20SSU is a microcontroller made by Microchip Technology in a SOIC-8 package with 8 pins. -40℃~+85℃ 10bit 128Byte 2.7V~5.5V 20MHz 2KB 6 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_Microchip_ATtiny:ATtiny25-20SS, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 52 are in stock at JLCPCB (part C2052990). 7 open-source boards in 6 repositories on GitHub use it.

Symbol

1RESET/PB52XTAL1/PB33XTAL2/PB44GND5AREF/PB06PB17PB28VCC
MCU_Microchip_ATtiny:ATtiny25-20SSFrom KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the ATTINY25-20SSU
PinNameType
1RESET/PB5Input/output
2XTAL1/PB3Input/output
3XTAL2/PB4Input/output
4GNDPower in
5AREF/PB0Input/output
6PB1Input/output
7PB2Input/output
8VCCPower in

Open-source boards using it

7
  • 4 layers40 × 40 mmSTMF765 Flight Controller, the printed circuit board in 3D

    STMF765 Flight Controller

    MatthiasGeorgImhof/STMF765_Flight_Controller

    A flight controller inspired by Speedybee F405 v3 but with CAN using F7 MCU. Use flash memory instead of flash card.

    235 parts1
  • 2 layers68.8 × 48.6 mmMSS Crossover Tiny, the printed circuit board in 3D

    MSS Crossover Tiny

    dabridgham/MSS-Crossover-Tiny

    An MSS Crossover Node

    36 parts
  • 2 layers100 × 80 mmRfid, the printed circuit board in 3D

    Rfid

    hsl25/RFID-PCB

    RFID PCB Design Task - University of Southampton

    41 parts
  • 2 layers8 × 56 mmNv h5t, the printed circuit board in 3D

    Nv h5t

    kmzbrnoI/nv-h5b

    S-COM module based on NV7B

    22 parts
  • 2 layers100 × 80 mmRfid, the printed circuit board in 3D

    Rfid

    tofu-86/RFID-PCB

    43 parts
  • 2 layers21.6 × 56.5 mmTSAL driver, the printed circuit board in 3D

    TSAL driver

    uvmaero/AERO-Boards-KiCad

    UVM AERO boards.

    12 parts3
  • 2 layers8 × 20 mmNv h5b, the printed circuit board in 3D

    Nv h5b

    kmzbrnoI/nv-h5b

    S-COM module based on NV7B

    17 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ATTINY25-20SSU?

Yes. The symbol is MCU_Microchip_ATtiny:ATtiny25-20SS and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ATTINY25-20SSU?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the ATTINY25-20SSU datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the ATTINY25-20SSU?

JLCPCB lists it as part C2052990, with 52 in stock; the sellers' links on this page open their listings.

What can replace the ATTINY25-20SSU?

Parts like it in the library: the ATTINY13A-SSU by Microchip Technology, the PIC12F1822-I/SN by Microchip Technology, the ATTINY202-SSN by Microchip Technology and the PIC12F675-I/SN by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ATTINY25-20SSU?

7 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.